Compare and adjust functionality for Solution Directory

Hello all,
I am trying to use the Compare and Adjust function with a Solution Directory. There is a previous discussion about how to do this between a Master Template and Implementation Project. Now that the Solution Directory exists, I would like to do the same thing. I.e. take scenarios from the Solution Directory into individual projects to extend them before putting them back into production. Together with the check in/out function, I would like to use the Compare and Adjust (SA_PROJECT_UPGRADE) function to identify differences periodically. The button for this appears in the transaction SOLMAN_DIRECTORY, but I can't seem to activate it - i.e. it is faded out. For projects, you must first run SA_PROJECT_UPGRADE to activate this button. However, you cannot select a Solution when running the project upgrade transaction. Does anyone know how to do this? Is anyone using the Solution Directory in a similar way and have advice?
Regards,
Marcel

Hi Marcel,
Funnily enough I have the exact same question.
Is there a way to compare changes between a maintenance project (business scenarios checked out this project) and the solution. This way the person approving the check in can see the changes before approving.
Have you had further information on this?
Referring back to your question, ideally once you've checked out a business scenario to a maintenance project you wouldn't continue to maintain it. It is the responsibility of that project to maintain it. In the meanwhile if you have a support issue that requires that business scenario to be updated, this will have to assessed and handled by either the project or the solution administrators.
Cheers
Ganesh

Similar Messages

  • Project "Compare and Adjust" Functionality

    We have created a template project that we are using to capture all the business processes we have implemented.  When we have a project we create an implementation project and pull in the associated business processes from the template project. If we are adding a new business scenario/process/step, then it is first put on the template project and then added to the implementation project.
    We then associate our documentation and objects in the project documentation tab, transaction, configuratino, and development tab.  After I run the project "compare and adjust" in SOLAR_PROJECT_ADMIN, I expect to see the differences between these tabs in SOLAR01/02.  This is not the case.  When I go to the tab and click "adjust to origina" I can see there is a difference between the template and implementation project.  I want to have the difference e.g. document be adjusted/copied to the template project through the copy command.  Unfortunately this is not working.  Any ideas????
    Thanks!!

    Thanks Andreas!
    I checked the user settings and they are set as you described.  It is a rather odd problem.  Sometimes the "yellow icons" appear but not consistently.  It is almost as if something must be "re-set" before I can see the changes.  I did find an relevant OSS note so we are in the process of applying that to see if our problem will be resolved. 
    For the second issue, when I do the "yellow icons", I click the adjust button and there are differences visible on the two sides of the pop up.  However, I am not able to complete the adjust functionality.  So to give more context here is what I am doing... I have created a template project - let's call it master and an impementation project.  I have created the business scenario/process/steps in the master plan.  I then have created the same business scenario/process/steps in the implementation project with the "master" template project as the source.  I then had added documentation to the project documentation and development tab.  In addition, I have added items to the configuration tab.  I want to be able to reflect the documents back to the "master" project so others can reuse.  How can I do this?  I have been running the compare in solar_project_admin by selecting the implementation project and entering the master template project on the selection screen.
    Any additonal thoughts would greatly be appreciated.
    Thanks!!!
    Janice

  • Automate Compare and Adjust functionality

    Hello Experts,
    I would like to know if there is an easy way to automate the entire process of "compare and adjust" in template management. I mean not only the transaction SA_PROJECT_UPGRADE execution but also all the adjustments in the roll-out projects (yellow flags): I do not want to click on every process / tab where the yellow flag appears and click on the button "compare and adjust", but click just once and my roll-out project is updated...
    Thanks a lot !
    Victoria

    Hello VIctoria,
    You are not the first one to ask this question.
    Please have a look at this link. The last comment is from Andreas Diebold and he is a developer with SAP, so he is authoratative in this regards.
    Accept all changes after SA_PROJECT_UPGRADE
    To summarize: there is no way to do this presently.
    Hope this puts this issue to rest for the time being.
    Regards,
    Paul

  • Compare and adjust business processes to a solution directory

    Dear all,
    I'm having truble with viewing changes that I have made in my maintenance project, using the compare and adjust function. Can you please tell me what I'm doing wrong?
    These are the steps I took:
    1. I chose a solution using transaction SOLUTION_MANAGER.
    2. I have made the solution settings, including creating a maintenance project, and enabling the check out/ check in & history functions. 
    3. Added business scenarios to the solution directory (some I chose from a project, and some I have created manualy).
    4. Checked the Scenarios out to the maintenance project.
    5. Made some changes in the maintenance project, including adding documents and transactions (transaction SOLAR01).
    6. Changed my user-specific settings to comparison mode - "display changes made in original".
    7. Checked the edited business scenarions back into the solution directory. I have checked, and the changes I've made in the maintenance project apeared now in the solution directory.
    Now starts the trouble...:
    8. I checked the scenarios out again from the solution directory to the maintenance project.
    9. Went to transaction SOLAR_PROJECT_ADMIN, marked the maintenance project line, and did "compare and adjust" of a "new version of original" .
    10. Went back to SOLAR01 and try to view the changes I have made in the maintenance project. I CAHNGES I'VE MADE ARE NOT MARKED...
    Sorry for the long description. Can you please help?
    Thank you,
    Adi

    Adi,
    Did you find a resolution to this problem? we are faced with the exact type scenario.

  • Global template and rollouts vs. Solution Directory

    Hello,
    I would like to know what is the best way to maintain the global template and the related rollouts documentation.
    I know the functionality of Solution Directory, ie. it should be the primary place to maintain a solution in production, changes should be done using maintenance project, checking out scenarios etc. However, my customer is running into a couple of challenges. The current situation is as follows:
    - The global template phase I has been finished (containing financial template).
    - The global template phase II development is starting (containing logistics template).
    - The phase I template has been rolled out to five countries which all are in production.
    - The phase I template will continue with new rollouts coming.
    - All the country-specific rollouts are actually in one physical SAP system so there is only one system to be maintained.
    I see it somehow impossible to try to maintain the template + rollout documentation in one single solution in Solution Directory. There is only one Documentation tab in the solution and if we put all the country-specific documentation there it is a mess. Furthermore, all the rollout projects are separate, it would be difficult to manager rollout projects with one maintenance project. Not to add the fact the compare and adjust functionality applies only to template projects not solution.
    I have the feeling that we would need continue maintaining the global template and rollout projects in SolMan Implementantion projects (template + rollout projects, template versions, compare and adjustment etc.). Only if I want to start process monitoring I would use solution but otherwise it cannot be very much utilized at the moment.
    Any comments? Have I missed something here now? I would appreciate any practical experiences about this.
    Br,
    Timo

    Hi Timo -
    The situation you are experiencing is similar to what I have seen.  And that is...ensuring Solution Directory is the "Single source of the Truth".  It is almost impossible when you have two parallel activities going on between 1) SAP implementation projects and 2) SAP maintainence/sustain activities in production.
    Solution Manager seems to be a great tool for companies that are in a sustain mode, resolving issues when found in production.  We recently decided to change our approach from SAP's recommended and best practice of using the Solution Directory connected to a Maintainence project and implementation projects being seperate rollout initiatives managed seperately.  Instead, we have changed our "Solution Manager Landscape" to encompass all activites into a 1 template project.  We now don't plan on going back to the SAP best practice of Solution Manager until we are completely done implementing SAP and we have identified what our true business processes are.  For example: creating the Business Process Hierarchy.

  • Sort method and adjustment account for Regrouping Receivable and Payables

    Hi Gurus,
    Kindly send to me sort method and adjustment accounts for regrouping receivables/payables paths and T-code
    Warm Regards
    Abdul

    Hi Jiger
    Thank you so much your fast reply.
    Also i have material its give configureation path but i try to go through that path but i didnt find it out right screen please let me know config path:
    IMG->FINANCIAL ACCOUNTING->AR/AP->BUSINESS TRANSCATION->CLOSOING->REGROUP->DEFINE SORT METHOD AND ADJUSTMENT ACCTS FOR REGROUPING RECEIVABLES/PAYABLES.
    But i cant see the path, Please let me know there is any mistake in path or not
    Warm Regards
    Abdul

  • Custom openAll and closeAll function for nested CollapsiblePanels

    Custom openAll and closeAll function for nested
    CollapsiblePanels:
    As a result of CollapsiblePanelGroup openAll() not working (
    see
    post here
    ) I attempted to create my own functions. Unfortunately this
    has brought two problems; 1) IE completely none responsive, and 2)
    custom openAll function opens some but not all CollapsiblePanels.
    I suspect that I have not put something somewhere that would
    inform CollapsiblePanelGroup that there is nesting. Can anyone
    please have a look (
    sample
    page here
    ) and offer suggestions.
    Happy Thanksgiving to all!

    I posted a working version of your sample in your original
    post
    here.
    --== Kin ==--

  • Drag and Drop functionality for SVG charts.

    Has anyone been able to get a drag and drop functionality with charts?
    I've read where Vikas was able to accomplish this with reports, but, unfortunately, it was an old post and his example is no longer available.
    I understand that this is more on the browser/presentation layer rather than the back-end, but, judging from the replies from the mainstays in this forum along similar lines, I'm hoping someone may have accomplished this already.
    I'm trying to get this to work for a "dashboard" type application I'm trying to prove out using HTMLDB.
    Your responses are appreciated.
    Thanks

    Hello,
    I've done drag and drop using the Adobe SVG Viewer before in a whiteboard application built on top of ... you guessed it... Apex. Unfortunately I do not have an example I can share with you but I know it can be done because I did it, trust me ;) . I am planning on building out that application as an application anybody can download and use but unfortually it will be bit.
    Your best bet at the moment is looking on google http://www.google.com/search?q=svg+drag+and+drop there are quite a few examples.
    Oh also look at this file in the images directory /images/javascript/svg_js_includes/svg_common/oracle.svgNodes.js it has quite a few helper functions and that file is included in every chart by default so there are functions you can use, (no drag and drop unfortunalty)
    If you have can lock down the users in your environment to use only Firefox or Safari you can look at canvas as well it's pretty handy and can do alot of the same stuff
    http://developer.mozilla.org/en/docs/Drawing_Graphics_with_Canvas
    and of course some simple examples in Apex
    http://apex.oracle.com/pls/otn/f?p=11933:78 (it runs on keypress in the textarea I use it to mess with Canvas constructs)
    Carl
    Message was edited by:
    Carl Backstrom

  • Compare and Adjust

    Dear All,
    After clicking "Copare and Adjust" button several other buttons show up. One of them is "Complete" button. My question is what this button does? What this button is for?
    Sincerely,

    Hi,
    have you read that documentation yet?
    http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
    Regards
    Andreas

  • Any indent and outdent function for the embedded code editor?

    Is any function for code indent and outdent available? If yes, please let me know.
    Thanks for replying!

    Changes in Accelerator Keys for "Block-Indent" and "Block-Unindent"The accelerator keys for "block-indent" and "block-unindent" have changed in the production release of Oracle9i JDeveloper. (This is a change from JDeveloper 3.2 and the beta and release candidate versions of Oracle9i JDeveloper.)
    They have changed from:
    [Ctrl]-[Shift]-I (block-indent)
    [Ctrl]-[Shift]-U (block-unindent)
    to the more standard bindings of:
    [Tab] (block-indent)
    [Shift]-[Tab] (block-unindent)

  • Compare and adjaust configuartion for different Report Servers

    Hi All,
    in one OFM-environment (11.1.1.6.0), I need to find and adjust different configuartion between reports servers.
    I can see in EM only ONE Report Server under asinst_1 and colud not find other Report Server (in-process-server). In addition, I can see both Reports Server with showjobs...
    What is wrong and how can I solve that?
    Regards,
    Moh

    Hi Moh,
    check the following support note that I think will answer your question.
    Reference
         Where is the in-process Reports Server in Fusion Middleware Control Site 11g? (Doc ID 862602.1)
    Regards, RZ

  • How to create "moveUp" and "moveDown" functionality for items in a TileList

    I want to create "Move Up" and "Move Down" buttons for items in a TileList. They should have the same functionality as if they were dragged and dropped, except only moving one position up or down (and thus switch places with the item above/below). I have tried this using this code for the moveUp button:
    private function moveItemUp(){
         var moveFromPos:Number = myTileList.selectedIndex;
         if(myTileList.selectedIndex > 0){
              var moveToPos:Number = myTileList.selectedIndex-1;
              var tempItem:Item = myTileListDataProvider.removeItemAt(moveFromPos);
              myTileListDataProvider.addItemAt(tempItem, moveToPos);
                    trace("New selected Index: "+ moveFromPos - 1);
                    myTileList.selectedIndex = moveFromPos - 1;
                    trace("New selected Index: "+ myTileList.selectedIndex);
    But my problem is that the selectedIndex of myTileList isn't correctly set. For instance; if I have a list of three items and I move the last item up this is what happens:
    1. Item three (selectedindex is 2) switches places with Item two (So far, so good)
    2. Item two is shown in GUI as selected (has Halo around it - so far, so good)
    3. If i click "MoveUp" again, the same two (item three and two) switces places, instead of the intended item two and one.
    The traces tell me that myTileList.selectedIndex variable isn't set correctly as the trace shows this:
    New selected Index: 1
    New selected Index: 2
    Any idea on how to solve this problem?

    I found a partial solution at http://www.ultrashock.com/forums/flex/tilelist-selected-element-removed-124313.html and modified it a bit. The answer was using the callLater() method as in this example:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initApp()" layout="vertical">
      <mx:Script>
      <![CDATA[
          import mx.events.FlexEvent;
          import mx.collections.ArrayCollection;
          var arr:ArrayCollection = new ArrayCollection();
          var temp:Number;
          var temp2:String;            
          private function initApp():void{                   
              arr.addItem("A");
              arr.addItem("B");
              arr.addItem("C");
              arr.addItem("D");
              arr.addItem("E");
              arr.addItem("F");
          public function traceEvent(event:FlexEvent):void{
              trace(event);
              trace(mtl.selectedIndex);
              if(mtl.selectedIndex==-1){
                  callLater(setInd);
          private function setInd():void{
              trace("Changing selected index..");
              mtl.selectedIndex = temp;
          public function removeItem():void{
                temp = mtl.selectedIndex - 1;
                temp2 = arr.removeItemAt(mtl.selectedIndex) as String;  
                arr.addItemAt(temp2,temp);                
          public function notifyChange(e:Event):void{
              trace("CH mtl.selectedIndex:" + mtl.selectedIndex);
      ]]>
      </mx:Script>
      <mx:TileList id="mtl" width="100" height="200" dataProvider="{arr}" columnCount="1" change="notifyChange(event)" updateComplete="traceEvent(event)"/>
      <mx:Button id="mbt" label="delete" click="removeItem()"/>
      </mx:WindowedApplication>

  • WdDoExit and Sync functionality for Mobile Offline Application

    Hey everyone,
    Hoping for some insight here.
    First of all, this is my requirement.  Reservation Items are downloaded to the client.  Any unposted items need to be uploaded as well as the posted items.  So really, one sync would download them all and another sync should upload them all back.  The modify bapi wrapper will unlock these unposted items for other people to pick.
    What I understand is that the nodes on the client have to have an attribute changed in order to be uploaded to the backend for validation.  Is there a setting that can be set to upload all items?  My guess is this wasn't how the offline stuff was designed.
    If not my solution is to update all Reservation items that have not been posted.  I'm doing this on the exit of the application in the wdDoExit function.  However, I was hoping to pop the user a message and have them decide if they actually wanted to exit.  In case they exited by mistake.  Is there a way to cancel an exit?
    I appreciate all ideas.
    Thanks,
    Alex

    Hi,
    I am sitll not clear about the issue you are facing but here are some facts about the mobile client 7.1
    a) As and when a CRUD happens on a node element for a data object node and a commit is called, sync messages are automatically created. These messages for create,update,delete operations are sent to DOE In the next sync cycle and any changes from DOE are also recieved and consumed in the same sync cycle.
    b) wdDoEXit methods on application controller & view controller are relevant for performing any final steps on exit which can be also used to commit also.
    c) Use OCARoot.getInstance().commit() for committing any unsaved changes done in the application. All unsaved changes across any data object will be saved.
    Regards,
    Nipun

  • Tare function DAQ assist and restart function for the vi program

    Hi!
    I have a program that aquiers a signal from the DAQ assist. I have searched here on the forum and on the web, but I can't find a way to implement a tare function. The signal is from a loadcell and therby it would be good if Icould tare the signal to value zero. In the DAQ assist I can calibrate it manually, but i would like to wire this function to a button. 
    Also I have another problem that shouldn't be hard to solve, but I'm struggling with it. I want a resert function in my labview code so that i can restart the program from the begginging. I have used a case structure with normal and restart enum constant, and wierd them via a tunnel. But it dosn't seems to work. Instead of resetting the program it only stops it 
    I have attached my code below.
    Best Regards Maurlind
    Solved!
    Go to Solution.
    Attachments:
    Tare function and restart.vi ‏365 KB

    I solved my problem with the tare function, i used a case structure and shift register to store values in it. se picture below.
    I haven't found a way to restart my VI yet. I tried to implement something from the community , see this link: https://decibel.ni.com/content/docs/DOC-4747
    But that doesn't work for my VI and i don't know why. Could someone explain why doesn't work ?
    My goal is to restart my whole VI with a press of a button.
    Best Regards Maurlind
    Attachments:
    tare function.png ‏25 KB
    restart vi.vi ‏488 KB

  • Backup / Journaling function for IPlanet Directory Server?

    Hi,
    does the iPlanet Directory Server provide a journaling function (logging and restore possibility of all changes made between two backups) ?
    I can�t find anything in the docs, but I somehow can�t image that this feature is not supported ...
    Thanks
    Kris

    I'd be interested to know this, as well. Did you find an answer for this?

Maybe you are looking for

  • How to change the document type while creating a PO by ME59N

    Hi, I  have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode. How to change the document type for group 2 in ME59N? Which user exi

  • Work item is in WAITING status

    Hi All, from the past 2 months we are getting so many work items in waiting status in our system. We are able to see different work flow work items in 'WAITING' status. What would be reason to be in waiting status. All this work items are having mess

  • How to Edit form

    HI, I want to edit the form.I am trying to edit the Resource Wizard form which we see when we create a resource. When we create a resource we get "Back" , "Next", "Cancel" buttons on the form to natvigate between Identity Template,Resource Attributes

  • SAP BI Roadmap

    Hi All, Wishing you a very happy New Year. Has anyone prepared BI roadmap or build SAP BI practice  ? If so can you please share with me. I am looking for some best practices/tips. Thanks Sonya

  • Can I watch something I bought on Itunes store without downloading it?

    So its a little disappointing that I cant watch the show I just bought through Itunes Store in my Iphone 5s since the only option I have is to download the show. is there anyway I can watch it without having to download the episode. I thouth it work