Compare and Adjust

Dear All,
After clicking "Copare and Adjust" button several other buttons show up. One of them is "Complete" button. My question is what this button does? What this button is for?
Sincerely,

Hi,
have you read that documentation yet?
http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
Regards
Andreas

Similar Messages

  • Compare and adjust functionality for Solution Directory

    Hello all,
    I am trying to use the Compare and Adjust function with a Solution Directory. There is a previous discussion about how to do this between a Master Template and Implementation Project. Now that the Solution Directory exists, I would like to do the same thing. I.e. take scenarios from the Solution Directory into individual projects to extend them before putting them back into production. Together with the check in/out function, I would like to use the Compare and Adjust (SA_PROJECT_UPGRADE) function to identify differences periodically. The button for this appears in the transaction SOLMAN_DIRECTORY, but I can't seem to activate it - i.e. it is faded out. For projects, you must first run SA_PROJECT_UPGRADE to activate this button. However, you cannot select a Solution when running the project upgrade transaction. Does anyone know how to do this? Is anyone using the Solution Directory in a similar way and have advice?
    Regards,
    Marcel

    Hi Marcel,
    Funnily enough I have the exact same question.
    Is there a way to compare changes between a maintenance project (business scenarios checked out this project) and the solution. This way the person approving the check in can see the changes before approving.
    Have you had further information on this?
    Referring back to your question, ideally once you've checked out a business scenario to a maintenance project you wouldn't continue to maintain it. It is the responsibility of that project to maintain it. In the meanwhile if you have a support issue that requires that business scenario to be updated, this will have to assessed and handled by either the project or the solution administrators.
    Cheers
    Ganesh

  • Compare and adjust business processes to a solution directory

    Dear all,
    I'm having truble with viewing changes that I have made in my maintenance project, using the compare and adjust function. Can you please tell me what I'm doing wrong?
    These are the steps I took:
    1. I chose a solution using transaction SOLUTION_MANAGER.
    2. I have made the solution settings, including creating a maintenance project, and enabling the check out/ check in & history functions. 
    3. Added business scenarios to the solution directory (some I chose from a project, and some I have created manualy).
    4. Checked the Scenarios out to the maintenance project.
    5. Made some changes in the maintenance project, including adding documents and transactions (transaction SOLAR01).
    6. Changed my user-specific settings to comparison mode - "display changes made in original".
    7. Checked the edited business scenarions back into the solution directory. I have checked, and the changes I've made in the maintenance project apeared now in the solution directory.
    Now starts the trouble...:
    8. I checked the scenarios out again from the solution directory to the maintenance project.
    9. Went to transaction SOLAR_PROJECT_ADMIN, marked the maintenance project line, and did "compare and adjust" of a "new version of original" .
    10. Went back to SOLAR01 and try to view the changes I have made in the maintenance project. I CAHNGES I'VE MADE ARE NOT MARKED...
    Sorry for the long description. Can you please help?
    Thank you,
    Adi

    Adi,
    Did you find a resolution to this problem? we are faced with the exact type scenario.

  • Automate Compare and Adjust functionality

    Hello Experts,
    I would like to know if there is an easy way to automate the entire process of "compare and adjust" in template management. I mean not only the transaction SA_PROJECT_UPGRADE execution but also all the adjustments in the roll-out projects (yellow flags): I do not want to click on every process / tab where the yellow flag appears and click on the button "compare and adjust", but click just once and my roll-out project is updated...
    Thanks a lot !
    Victoria

    Hello VIctoria,
    You are not the first one to ask this question.
    Please have a look at this link. The last comment is from Andreas Diebold and he is a developer with SAP, so he is authoratative in this regards.
    Accept all changes after SA_PROJECT_UPGRADE
    To summarize: there is no way to do this presently.
    Hope this puts this issue to rest for the time being.
    Regards,
    Paul

  • Project "Compare and Adjust" Functionality

    We have created a template project that we are using to capture all the business processes we have implemented.  When we have a project we create an implementation project and pull in the associated business processes from the template project. If we are adding a new business scenario/process/step, then it is first put on the template project and then added to the implementation project.
    We then associate our documentation and objects in the project documentation tab, transaction, configuratino, and development tab.  After I run the project "compare and adjust" in SOLAR_PROJECT_ADMIN, I expect to see the differences between these tabs in SOLAR01/02.  This is not the case.  When I go to the tab and click "adjust to origina" I can see there is a difference between the template and implementation project.  I want to have the difference e.g. document be adjusted/copied to the template project through the copy command.  Unfortunately this is not working.  Any ideas????
    Thanks!!

    Thanks Andreas!
    I checked the user settings and they are set as you described.  It is a rather odd problem.  Sometimes the "yellow icons" appear but not consistently.  It is almost as if something must be "re-set" before I can see the changes.  I did find an relevant OSS note so we are in the process of applying that to see if our problem will be resolved. 
    For the second issue, when I do the "yellow icons", I click the adjust button and there are differences visible on the two sides of the pop up.  However, I am not able to complete the adjust functionality.  So to give more context here is what I am doing... I have created a template project - let's call it master and an impementation project.  I have created the business scenario/process/steps in the master plan.  I then have created the same business scenario/process/steps in the implementation project with the "master" template project as the source.  I then had added documentation to the project documentation and development tab.  In addition, I have added items to the configuration tab.  I want to be able to reflect the documents back to the "master" project so others can reuse.  How can I do this?  I have been running the compare in solar_project_admin by selecting the implementation project and entering the master template project on the selection screen.
    Any additonal thoughts would greatly be appreciated.
    Thanks!!!
    Janice

  • Upgrade projects and Compare and ajust func.???

    Hi All.
    I am trying setting up a demo of the benefits using SolMan for upgrade projects with Compare and Adjust functionality.
    I am following a guide with the following steps:
    1. Create an Implementation project with some processes from BPR (Using SAP R/3 Enterprise 4.7 as logical component).
    2. Model (change) the processes to simulate that a not fully SAP std. process is used at this compagny.
    3. Copy the implementation project to an Upgrade Project (with option "Adjust target project to original of the source project".
    4. Adding logical component SAP R/3 ECC 6.0 to the system landscape.
    5. Executing transaction SA_PROJECT_UPGRADE for the Upgrade project.
    Now, when I go to the project, I see no marking of changes anywhere...
    Could this be because I am using the wrong processes in my Implementation project from BPR?
    Does anyone have a good example of processes that can be good to demo this?
    Thanks in advance!
    /Per

    Hi All.
    I am trying setting up a demo of the benefits using SolMan for upgrade projects with Compare and Adjust functionality.
    I am following a guide with the following steps:
    1. Create an Implementation project with some processes from BPR (Using SAP R/3 Enterprise 4.7 as logical component).
    2. Model (change) the processes to simulate that a not fully SAP std. process is used at this compagny.
    3. Copy the implementation project to an Upgrade Project (with option "Adjust target project to original of the source project".
    4. Adding logical component SAP R/3 ECC 6.0 to the system landscape.
    5. Executing transaction SA_PROJECT_UPGRADE for the Upgrade project.
    Now, when I go to the project, I see no marking of changes anywhere...
    Could this be because I am using the wrong processes in my Implementation project from BPR?
    Does anyone have a good example of processes that can be good to demo this?
    Thanks in advance!
    /Per

  • Comparing and Asjusting data b/w two systems using SCU0 Transaction

    I need to compare and adjust data between two systems for tables T006 , T006A  . I am using Transaction SCU0 for comparison . It is giving me comparison results  , but  coz of some reason Button for adjusting data is not active for me .
    If I do the same thing using SM30 ,  Adjust button is coming after comparison  . I don't have maintinance views available for these tables otherwise i would have used SM30 . I want to do that using SCU0 only . Any idea how can I make  Adjust button active  .
    Regards

    Hi,
    Welcome to SDN !!!
    I would suggest you to please contact your BASIS Team. They will Activate the button for you.
    Thanks,
    Chidanand

  • Why use layer masks and adjustment layers?

    I've been using PSE and CS successfully for years.
    One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that?  It's quick (Ctrl-J), I can do it as many times as I want, I'm not affecting my Background layer.  If I like the changes, I can keep them.  I can switch the copy on and off to compare with the Background layer.  I can do any type of blend or combination I desire.  I can insert Gradient layer(s), select any part of the copy and (Ctrl-J) create a new layer containing only the selected part.  I can adjust size, rotate, do anything.
    It almost seems that "layer mask" and "adjustment layer" are mainly another layer of terminology; can anyone explain (preferably in 50 words or less) how they are intrinsically different from or superior to working with copies of the Background layer?  What can be done with them that can't be done simply using copies of the Background layer?

    Here's a very basic example of the advantage of using a layer mask.
    I have this picture of a sunflower and I want to convert the background to black & white, leaving just the flower in color.  I duplicated the Background layer, converted it to B&W and proceeded to use the Eraser to uncover the flower color. But I made a mistake and erased outside the flower.  There is no way to correct this other than deleting the layer and starting again.
    Now let's use a layer mask on the B&W layer. Set the Foreground/Background colors to the defaults black/white. Using the Brush tool paint on the mask with black to reveal the color.  Here I painted too far, revealing a green leaf in the background.  No need to start over.  Simply switch to white and paint the excess to convert back to the B&W.
    Tip: while painting you can type "X" to toggle between black and white.
    You could also select the flower using the various selection tools and then fill the selection with black. If it turns out the selection was not 100% accurate you can then fine-tune the result by painting on the mask with black or white as necessary.

  • [svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

    Revision: 3120
    Author: [email protected]
    Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
    Log Message:
    When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
    Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/webapps/webtier/build.xml
    Added Paths:
    flex/sdk/trunk/templates/client-side-detection/
    flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
    flex/sdk/trunk/templates/client-side-detection/index.template.html
    flex/sdk/trunk/templates/client-side-detection-with-history/
    flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
    flex/sdk/trunk/templates/client-side-detection-with-history/history/
    flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
    flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
    flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
    flex/sdk/trunk/templates/express-installation/
    flex/sdk/trunk/templates/express-installation/AC_OETags.js
    flex/sdk/trunk/templates/express-installation/index.template.html
    flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
    flex/sdk/trunk/templates/express-installation-with-history/
    flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
    flex/sdk/trunk/templates/express-installation-with-history/history/
    flex/sdk/trunk/templates/express-installation-with-history/history/history.css
    flex/sdk/trunk/templates/express-installation-with-history/history/history.js
    flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/express-installation-with-history/index.template.html
    flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
    flex/sdk/trunk/templates/metadata/
    flex/sdk/trunk/templates/metadata/AC_OETags.js
    flex/sdk/trunk/templates/metadata/readme.txt
    flex/sdk/trunk/templates/no-player-detection/
    flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
    flex/sdk/trunk/templates/no-player-detection/index.template.html
    flex/sdk/trunk/templates/no-player-detection-with-history/
    flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
    flex/sdk/trunk/templates/no-player-detection-with-history/history/
    flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
    flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
    flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
    Removed Paths:
    flex/sdk/trunk/templates/html-templates/

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • How can I compare and delete duplicate files?

    I have nearly two terabytes of images stored in my image archives and I'm sure that there are many duplicates.  Is there an easy way to compare and delete duplicate files to save space on my drives?
    Thanks,
    Tom

    Hi Tom,
    The's no "easy" way, even if they're the same size, name, etc., they can be different qualities or even contents, so they really have to be compaed byte by byte, but...
    https://itunes.apple.com/us/app/photosweeper-lite-get-rid/id506150103?mt=12

  • Date fields and compare and get the later date of the fields

    I am trying to compare these date fields and compare and get the later date of the fields
    Tables are
    TABCASER
    TABCASER1
    EVCASERS
    Field
    Are
    TABCASER1.CASER_no
    The dates are to be compared and then get the records with the highest or latest date value.
    TABCASER1.CASERRECIEVEDDATE
    EVCASERS.FINALEVDATES
    EVCASERS.PUBLICATIONDATE
    EVCASERS.PUBLICATIONDATE
    TABCASER.COMPAREACCEPDATE
    I have this code but I am trying to figure out what it all means.
    I have several questions.
    1.
    1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
    2.     is it necessary to use todate? And to_date? What does this do?
    3.     decode, is this necessary too. What does this do? NULL?
    4.     
    5.     
    6.     when I do get the query results how do I send it to coldsuion and out put to a display.
    Someone sent me this code.
    is there abetter way of doing this? To compare the dates and store in a var to display. thanks
    Here is my code below:
    Greatest(
         CASE
              WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
         decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                             WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
         decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                             WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
         decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                             WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
         decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                             ELSE
         decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                        END
              ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
              between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
    is there abetter way of doing this? To compare the dates and store in a var to display. thanks

    Hi
    If you have date datatypes than:
    select
    greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
    from TABCASER, TABCASER1, EVCASERS
    where ...-- join and other conditions
    1. greatest is good enough
    2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
    3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
    6. to format the date for display use to_char function with format modell as in the to_date function.
    Ott Karesz
    http://www.trendo-kft.hu

  • Events a mess after splitting and adjusting time.(iphoto '11)

    My most recent event is such a mess I don't really know where to start without writing an essay, in the hope that it's been seen before I'll be breif but am willing to expand and provide screenshots etc if it will help.
    Basically, I've duplicated the contents of the event twice and ended up with 3 events called 'original', '16:9' and '4:3' (hopefully no explanation needed).
    So the first thing I notice is when I click on any of these events, all 3 are shown in list view (with the collapsable arrows) but only one of the events will actually display the photos despite the others saying that they have the correct number of photos.
    I'm wondering if this is now how iPhoto 11 works, if it is fair enough, I haven't actually split events like this before in this version) and if it is can I delete the two events that don't show photos without affecting the third event, I haven't tried so far just in case.
    But it gets worse, I've collected together photos other people have taken and adjusted the time so they display in order, now instead of all all my photos being listed in one of the events I have a few in each and no matter what I do I don't seem to be able to regroup them except by highlighting all 3 events and opening them together.
    My issue is compounded because I have a lot of photos in this event(s) and the more I try to move them around the more complicated it is to keep track of them.

    Old Toad wrote:
    How did you duplicate the photos in the original event and then create a new separate event with those duplicates?
    cmd-D to duplicate, select the second photo (I sort by date, so the second photo is the duplicate of the first), split event, (this moves all but the first photo into a new event), manually select all the originals in the new event and drag them into the first event.
    When you open one of the events with no photos do you see any thumbnail windows, although blank?
    No. Unfortunately I've been doing a little more fiddling so can't post a proper screenshot but using the one below as an example:
    Click to enlarge
    You will see the numbers of photos don't add up.
    By way of example:
    Three events (original, 16:9 & 4:3)
    By selecting 'original' from the main event window I get what you see, it's as though I'd selected all three events before double clicking but didn't.
    By selecting '16:9' from the main event window, all 3 events will open again in list view, in this view the 'originals' heading has the other 86 photos/thumbs in, the '16:9' heading has the other 86 photos/thumbs in, and the '4:3' heading has 1 photo/thumb in.
    By selecting '4:3' from the main event window, all 3 events will open again in list view, in this view the 'originals' heading has no photos/thumbs in, the '16:9' heading has has no photos/thumbs in, and the '4:3' heading has 1 photo/thumb in.
    If I do select all 3 events in the main event window and double click, I get all three headings with all the photos/thumbs in.
    That was up until a moment or two ago, now if I repeat the action in coloured text, I don't get headings for events that don't show any photos.

  • How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

    How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

    Ernst ~ Welcome to the Support Communities. See this post:
    Editing my iWeb page from another computer

  • Lightroom 4 - Spot removal and adjustment brush issues

    In Lightroom 4, my spot removal and adjustment brush tools will not work on all areas of photos (in particular faces and the center of photos). The cursor seems to show the tool only on the outside portions of the photo.  Any suggestions?

    I have seen this a couple time and a restart of Lr has always fixed it.  It seems like there is some kine of dialog box waiting for input "hidden" behind Lr as it its not there if you minimize Lr.  This has been reported many times for a LONG time so it is probably one of the Lr bugs that is not getting fixed.  To be fair to Adobe, if someone could reproduce this problem it might get fixed but it seems to be pretty obscure.  BTW, I think Ihave seen reports of it in Lr5 also so hopefully it will get fixed in Lr 6

  • The Graduated Filter and Adjustment Brush in Lightroom 4 | The Complete Picture with Julieanne Kost | Adobe TV

    In this episode of The Complete Picture, discover the power of making selective adjustments like dodging and burning, color corrections and noise removal using the Graduated Filter and Adjustment Brush in Lightroom 4. Note: although this video was recorded in Lightroom, the same techniques are available in Adobe Camera Raw in Photoshop CS6.
    http://adobe.ly/QPYXzm

    Julianne is a great tutor but the picture behind her head is distracting.
    Tom Torda

Maybe you are looking for