Compat-wireless -1 channel patch not working !
Hello there,
I've recently bought a usb wireless adapter (ALFA AWUS036NEH) in order to use the aircrack-ng suite.
Unfortunately, the kernel drivers have the channel -1 bug, so I install AUR package compat-wireless-3.2.5-1, which is supposed to be patched for this bug.
I modified the PKGBUILD to only install rt2x00 group driver.
Once the install is done, i reboot or do
modprobe rt2800usb
and the card is working fine for conventionnal use.
But when I use it for airodump, i've still the fixed channel : -1 bug...
My pci card (Broadcom) has the same bug... (even after applied the patch ofc)
Can anybody help me? (for example tell me how to manually install it?)
Thanks in advance.
Some command that may help :
$ lsusb -v
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
$ uname -r
3.2.9-1-ARCH
$ lsmod
Module Size Used by
rt2800usb 14400 0
rt2x00usb 9172 1 rt2800usb
rt2800lib 40420 1 rt2800usb
rt2x00lib 35407 3 rt2800lib,rt2x00usb,rt2800usb
crc_ccitt 1363 1 rt2800lib
cordic 1073 1 brcmsmac
crc8 1186 1 brcmsmac
brcmutil 3617 1 brcmsmac
mac80211 234450 4 brcmsmac,rt2x00lib,rt2800lib,rt2x00usb
cfg80211 174596 3 mac80211,brcmsmac,rt2x00lib
rfkill 15498 3 cfg80211,bluetooth
ext4 418044 3
crc16 1359 2 ext4,bluetooth
jbd2 71243 1 ext4
mbcache 5881 1 ext4
sd_mod 28307 5
ohci_hcd 21631 0
ehci_hcd 40698 0
usbcore 146113 7 ehci_hcd,ohci_hcd,btusb,uvcvideo,rt2x00usb,rt2800usb
Last edited by Keyhaku (2012-03-13 13:47:42)
Have you tried downgrading your kernel a couple of versions... maybe to the 3.2.5 version? And of course, re-building and re-installing the package.
Similar Messages
-
I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?
I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.
-
X100e - Wireless is on and not working
Hi guys,
I am completely new to the forums and to thinkpads. I have had my think pad for 2 months. Till yesterday everything was working well, until I decided to update the drivers. After it the wireless stoped working. Problem is exactly the same as:
http://forums.lenovo.com/t5/ThinkPad-Edge/Wireless-apparently-active-but-not-working/m-p/280548
However, the solution does not work for me. All my drivers are up to date. I did reinstall the Realtek driver, access connections and updated bios without any luck. Clicking repair does not solve the problem. The wireless is not shut off in the BIOS. Do you guys have anything in mind?
Additional details:
Connection status: Not connected
Cause: Association failed - wireless radio not powered on.
Error code: 016
Recommended action:
Communication with access point could not be established because the wireless radio is off. To power on the radio and attempt to connect, click Repair.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name 11b/g/n Wireless LAN Mini-PCI Express Adapter II
Adapter type Wireless LAN
Adapter speed 54 Mbps
Driver/Firmware version 2017.2.730.2010/ N/A
Adapter status Enabled
Connection Status Not connected
Disable unused cards? Yes
TCP/IP Settings
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
Network name (SSID)
Connection type Unknown
Security encryption Configured by Windows
System Information
System model 35089JG
BIOS version 6XET41WW (1.25 )
Operating system version Windows 7
Access connections version 5.72
Access Point scan list
Network name (SSID) Wireless mode MAC address Signal strength Channel
Global Settings
Network
Allow Windows users without administrator privileges to create and apply location profiles ->No
Allow the wireless LAN radio to be turned off when inactive -> Yes
Enable autodeletion of unused profiles -> No
Disable the Peer to Peer community feature -> Yes
Enable SMS feature -> Yes
Allow selection of location profiles with Fn+F5 On Screen Display menu -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Show Access connections Gauge in task bar -> Yes
Preferences
Enable sound effects -> No
Do not show balloon tips from the Access Connections system tray icon -> Yes
Do not show balloon tips from the Access connections Gauge -> Yes
Show WiMAX page as default on Main GUI -> NoHello,
A couple of things to try:
Toggle the Wi-Fi radio on and off by pressing the Fn+F5 key combination.
Open the Device Manager (filename: DEVMGMT.MSC), remove the wireless adapter, then reboot and let Windows re-detect it.
Let us know the results of the above, and we can proceed from there.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Wireless network and bluetooth not working on touchsmart 600
This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please adviseHi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
Wireless keyboard some keys not working
wireless keyboard some keys not working need help
Please do a SMC reset, if that does not work the first time please do it 2-3 more times. You can find instructions at:
https://discussions.apple.com/docs/DOC-3603 -
HT1338 wireless keyboard letters are not working
My wireless keyboard letters are not working after i using retouch option on aperture
Thanks
Vicsuperdupertyn wrote:
i left my macbook pro open for along period of time,
after i open it
What did you open if if was already opened?
As for your non-working keys, perhaps debris somehow got beneath the keys. Especially if you were eating while using your computer. Spilled anything on the keys lately or previously?
How to remove and clean your Macbook Pro Keyboard
Cleaning Macbook keys after a spill
If none of the above applies to you, you could have a hardware issue. If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
NOTE: If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with. They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
If you have Homeowners insurance, place a claim with them. -
Hp 6500 wireless. all buttons flashing not working
i have a hp 6500 wireless, and it is not working .
all buttons are flashing and the screen reads, "to avoid damage turn off and then turn back on"
i tried that but idid not workTurn the printer off. Hold # and 6 keys on the printer while and for a few seconds after turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Ultraslim wireless keyboard and mouse not working
Hi , I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
I looked online for troubleshooting options, but did not find anything.
The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
can the nano reciever be replaced;
any other options to troubleshoot;
any chance that this could be a software problem
ThanksHi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Foxtel on T-Box -- all Foxtel channels suddenly not working
Hi I would really appreciate some help. We have happily had, used and (I daresay) loved our T-Box for the past 5 years. And then I made the fatal mistake of subscribing to Foxtel on T-Box about 6 weeks ago, as I wanted to legally watch Game of Thrones. (Please don't laugh at me spending $65 per month to watch one TV show; I am trying to do the right thing!) Suffice to say, the love affair with our T-Box is over. Foxtel on T-Box worked fine for a couple of weeks. (My original setup was a T-Box 1, connected via a strong WiFI signal via HDMI to plasma TV). And then all of a sudden, about 4 weeks ago, I began losing all Foxtel channels. Instead of the channel coming up, I get a black screen with a message at the top of the screen that says "Loading internet channel, please wait". And sometimes, I also get a message at the bottom of the screen which says "Cannot start playback, please try again later (0612)". A wierd thing is that through all of the problems with Foxtel on the T-Box described in this post, using the exact same account/subscription, Foxtel has continued to work percetly fine via the Foxtel Go app on my iPad and PC. Since out Foxtel channels started not working, I have called Telstra support about 5-6 times. As a result of these calls, I have purchased a T-Box 2 and it connected via ethernet instead of WiFi. (BTW, this didn't change anything and IMHO was a complete waste of $99.) The Telstra support person has apparently done all he/she can on their end. And I have also reloaded subscriptions, reset licences, reformatted the hard drive, reset the T-Box(s) on more occasions than I can count - about 10x. My ADSL2+ internet speed is not great, but it should be OK. It's usually about 5-7Mbps download and 0.5-1Mbps uplaod (as measured by http://vic.speedtest.bigpond.net.au). As I mentioned above, even when the Foxtel channels don't work on the T-Box, it works fine via the Foxtel Go app on my iPad and PC. Sometime doing these things get the channels to work again, by trying one thing after another, but usually it does not. On the rare occasion when the Foxtel channels do somehow come back, neither the Telstra support person nor I, know what happened to make them work. The issue has been escalated to a "Level 2 support person" who is investigating. But he/she has been investigating for the past 2 weeks, and hasn't been any help at all so far. I now keep getting fobbed off by the Telstra support person, with no commitment about when the "Level 2 support person" will do anything or when he/she will call me. Whilst the Telstra support people I talk to are perfectly polite - so far no-one can solve this problem. This is very, very, very frustrating! If you have had similar issues and fixed them, can you please let me know how? If you are a Telstra support person monitoring this forum, how can I progress fixing this problem? Cancelling my Foxtel on T-Box subscription is not what I want to do, but right at the moment I have no confidence that anyone from Telstra has any idea what is going on or how to fix it. Any support would be grately appreciated. Michael PS: And if I hear another Telstra support person ask "Can I help with anytthing else today?" -- when they haven't been any help whatsoever WRT the problem I called up about -- I am going to scream!
I'm in the same boat, into Week 3 of losing all my Foxtel Channels, Lost anything that says Foxtel. Channel 958 doesnt have any reference to Foxtel. Reset over 10times, Router & Tbox Reset & turned off for the Day.
No Foxtel Channels show up in the Guide. First I had the error messages, then everything was wiped when asked to reset with a Telstra Customer Support Person. Then got invalid channel numbers on all Foxtel, & lost all Info to anything Foxtel.
7 Customer Support persons & 14hours of Phone calls & complaints, no one has an answer how to get my Subscription Back. They can see that I have a Subscription but don't know how or why this has happened.
Have also got Foxtel on the job looking for answers as well as Telstra.
I have been using Computers for 30years & can't believe no one knows how to fix it.
The Tech Crew at Telstra said that my line speed had slowed due to the fact I don't have Foxtel on anymore.
I asked my Wife to ask the Customer Support person to get the Tech to Email that Answer in writing to us so I can show the Communication Ombudsman people, but all they send are Emails about "I hope we have helped you with your query" & can you complete the online survey.
What they need to do is a full diagnostics / firmware reload, but it seems no one knows how to do that.
Sorry I can't help! -
Robohelp 9 with patch - Not working with IE10
Hi,
We have a problem with webhelp generated from RoboHelp 9 when viewing with Internet Explorer 10. We can't open a topic on the left or open a search result, until we either :
A) Resize the window
B) Resize the splitter between contents and the content pane on the right
C) Open the dev tools via F12
We have installed the patch provided by adobe for existing webhelp generated by RH9 at the following address :
http://abak09.abaksoftware.com/AbakWeb7700/Extras/Help/EN/
I have also tried to install RH10 and generate the project again, but the same issue occurs.
I don't know what else to look for, the problems are what the patch was released for, but it is not working in our case.We are reproducing with Windows 8 Pro 64bit, with Internet Explorer 10 (Update version 10.0.3).
I see on your website the snippet "Topics not opening in IE10.". On our web server, we add the IE8 compatibility tag for our web application to work correctly. I have created a new site without this tag and the fix is working.
Thanks a lot for your help -
Apple Wireless Keyboard 'o' key not working
I have recently acquired a pre-owned wireless keyboard which was working fine until a few days ago. Now the 'o' key has stopped working and some keys do not work with the left shift key - they work fine with the right-shift key and other keys work with left-shift.
I have checked the key using the keyboard viewer and the 'o' is not highlighted highlighted when the key is pressed. I can type 'o' characters using the keyboard viewer.
I have tried pairing the keyboard with another mac and it has the same symptoms on that machine so I don't think it is a software problem or a problem with SVC, PRAM or Bluetooth on the mac ( late-2012 Mac Mini).
I have tried to look for solutions here and in other forums but none of the suggested solutions seem to work.
Any suggestions?I would reset the PRAM. If that does not work, I suspect it is failing and/or failed.
I agree, it is not a Bluetooth problem.
Barry -
Wireless headset HS-26W not working
I just bought headset-wireless model HS-26W, but it does not work. I pluget it to charge it, but there was no sign that the battery was charging(indicator lamp did not flash) I cant even turn it on.
Is there some special way of first time charging the battery or headset is headset is broken and I have to replace it?29-Dec-2008 12:06 AM
benymora wrote:
First, excuse the grammar of my writing, I am starting with English, a problem which I would appreciate it if I can help, I have a headset NOKIA HS-26W as mentioned, if the battery charge, however, the problem is in my cell I asked for a password, this should be? or what would it be? thanks in advance
password would be 0000 ( 4 zeroes) -
2 channel oscilloscope not working on one channel, Better scope?
My experience with Labview is limited and I am just restarting after about a year. I have searched but do not see the answer to my question.
We upgraded from LV 7.0 to LV 7.1 and the 2 channel oscilloscope that is included as an example under V7.0 broke. I posted on the forum and was helped to download the updates to account for the legacy drivers. I did this and the scope started to work... sort of. I can't get channel 2 to work, the B channel. We have the 6036E mulitfcn board and the BNC-2120.
Does anyone know of a better LV scope or one that is available as free or shareware. I realize this could be written, but I don't have the expertise to do so at present. Or is there a way to fix the current scope? The only alternative I seem to have is to go back to V7.0 as this is the only scope I have.
Thank you in advance.
Robert LewisHello Robert,
From what I'm understanding you seem to have just installed LabVIEW 7.1 and are no longer able to load an application that you had running in LabVIEW 7.0.
What could be happening here is you may not have the installed the drivers for the DAQ device that you are using. I would recommend looking in the folder path C:\Program Files\National Instruments\LabVIEW 7.1\vi.lib and make sure that you have folders in there called "Daq" and "DAQmx". If those folders do not exist, then download the latest version of the driver (NI-DAQ Version 7.4 for Windows 2000/NT/XP) and make sure that you enable support for LabVIEW 7.1.
If the program you are running is a VI, then you might want to look inside the VI and see why there is the broken arrow as that would give you a better idea as to what is missing or broken.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments -
Hi all!
I'm trying to apply a patch and it's not working. I've searched the web, metalink included and nothing... plus, the version numbers confuse me. Please advise.
Thanks in advance!
Here goes the apply verbose output (I'm sorry for the long output):
[oracle10@as1 6370967]$ opatch apply -verbose
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /opt/oracle/product/10g
Oracle Home Inventory : /opt/oracle/product/10g/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : /opt/oracle/product/10g/oui
OUI shared library : /opt/oracle/product/10g/oui/lib/linux/liboraInstaller.so
Java location : /opt/oracle/product/10g/jre/1.4.2/bin/java
Log file location : /opt/oracle/product/10g/.patch_storage/<patch ID>/*.log
OPatch Version 1.0.0.0.63
Perl Version 5.008003
Performing pre-patch installation checks.
.patch_storage exists, checking its perms and changing it if necessary.
Creating log file "/opt/oracle/product/10g/.patch_storage/6370967/Apply_6370967_03-26-2010_15-15-05.log"
Starting OPatch Apply session at 03-26-2010_15-15-05.
Command arguments parsed by OPatch are: apply -verbose
OPatch version is: 1.0.0.0.63
The contents of the file: /etc/oraInst.loc
inventory_loc=/opt/oracle/oraInventory
inst_group=oinstall
Performing RAC prerequisite checks...
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /opt/oracle/product/10g/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/opt/oracle/product/10g/oui/jlib/OraInstaller.jar:/opt/oracle/product/10g/oui/jlib/srvm.jar:/opt/oracle/product/10g/OPatch/jlib/opatch.jar:/opt/oracle/product/10g/oui/jlib/xmlparserv2.jar:/opt/oracle/product/10g/oui/jlib/share.jar:/opt/oracle/product/10g/jlib/srvm.jar" opatch/O2O "/opt/oracle/product/10g" "/opt/oracle/product/10g/oui" opatch.pl 1.0.0.0.63
Result:
output to OPatch:
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Backing up the rollback script as "/opt/oracle/product/10g/.patch_storage/6370967/rollback_6370967.sh_03-26-2010_15-15-06"
Interim Patch ID: 6370967
Checking the patch inventory.
Component Name: oracle.rdbms.rsf
Component Version: 10.2.0.3.0
This is a rolling patch.
Bugs fixed by this patch 6370967:
6370967 : TLS 1.0 HANDSHAKE FAILS WHEN THE CLIENT IS RUNNING ON VISTA
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
Home has OCM installed but not configured.
Invoking fuser to check for active processes.
Skipping invocation of fuser on "/opt/oracle/product/10g/bin/oracle" as the file does not exist or is a directory.
Checking active processes:
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /opt/oracle/product/10g/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/opt/oracle/product/10g/oui/jlib/OraInstaller.jar:/opt/oracle/product/10g/oui/jlib/srvm.jar:/opt/oracle/product/10g/OPatch/jlib/opatch.jar:/opt/oracle/product/10g/oui/jlib/xmlparserv2.jar:/opt/oracle/product/10g/oui/jlib/share.jar" opatch/CheckConflict "/opt/oracle/product/10g/oui" "/opt/oracle/product/10g" opatch.pl 1.0.0.0.63 6370967 "6370967 " "/home/oracle10/ano/as/9_patch_6370967/6370967/etc/config/actions" "/home/oracle10/ano/as/9_patch_6370967/6370967/etc/config/inventory"
Result :
MISSING_COMPONENT : oracle.rdbms.rsf, 10.2.0.3.0
MISSING_COMPONENT : oracle.rdbms.rsf, 10.2.0.3.0
ERROR: OPatch failed during prerequisite check.
And the lsinventory output:
[oracle10@as1 6370967]$ opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /opt/oracle/product/10g
Oracle Home Inventory : /opt/oracle/product/10g/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : /opt/oracle/product/10g/oui
OUI shared library : /opt/oracle/product/10g/oui/lib/linux/liboraInstaller.so
Java location : /opt/oracle/product/10g/jre/1.4.2/bin/java
Log file location : /opt/oracle/product/10g/.patch_storage/<patch ID>/*.log
Creating log file "/opt/oracle/product/10g/.patch_storage/LsInventory__03-26-2010_15-11-32.log"
Result:
Installed Patch List:
=====================
1) Patch 8555288 applied on Fri Mar 05 15:52:21 WET 2010
Unique Patch ID: 11437032
[ Bug fixes: 8555288 ]
OPatch succeeded.
###############################################3Tell us about the product, type of OAS, version and what patch are you trying to apply.
Frankly, digging from the logs of your output some of this information and you would get fewer responses than what you would get if you introduce your system.
thanks,
AMN
Maybe you are looking for
-
Multiple Fonts in a javax.swing.JTextPane
I am trying to use multiple fonts in a JTextPane, but can only find ways of changing the font family used. Can anyone give me any pointers on how to do this, or a document somewhere that explains, either way with out going into the javax.swing.text.h
-
Problem with program SWN_SELSEN
Hi , I am using the program SWN_SELSEN to send my workitems to outlook. but the problem is .. My subject line is also reflecting in the body the mail. I mean to say.. my subject is coming twice i.e. on both subject and body of the workitem can any on
-
User Generated Data and Cardinality Estimates
Platform Information: Windows Server 2003 R2 Oracle Enterprise Edition 10.2.0.4 Optimizer Parameters: NAME TYPE VALUE object_cache_optimal_size integer 102400 optimizer_dynamic_sampling
-
Do I have to make an appointment to fix a cracked screen?
Just wondering
-
Conversion - ASCII (Alphabet) to Hexa and Hexa to ASCII (Alphabet)
Hi Guys, Can you please give me the code to change ALPHABET to HEXA and HEXA to ALPHABET in UNICODE system. 1. I want to convert alphabet 'A' to Hexa. 2. Convert Hexa to back in Alphabet (ASCI). Thanks, mini