Compatibility view

in IE8 tools the compatibility view has to be checked for a web page to work how do i find the compatibiiltiy view in firefox 4.0.1 the web sit will not work in firefox . It did not work in IE 8 until i set it to compatibilty view how do i do this in firefox

Hi，
In this case,you could use GPO to make the "Include updated website lists from Microsoft" option checked... It contains lists of public domains and their default document and browser modes and ModernIE Flash support.
for intranet sites either add the appropriate x-ua value in the head or in the response header.
And use GPO to configure the user setting (Tools>Compatibility View>"Display intranet sites in Compatibility View") and disable user access to change the Intranet zones' settings on the security tab and Compatibility view settings dialog.
You can refer to below link to get more details regarding the compatibility view.
https://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
Hope it helps.
If you still got questions regarding this, feel free to post here.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I am trying to find "compatibility view settings" in order to add a website that I need to use for work. PLEASE HELP!

I received a "how to" sheet of how to be able to view this website but it wants me to download Internet Explorer (excuse me while i say yuck!)...
So the directions state: Under "Tools" click on "compatibility view settings". Where is says "add this website" write in the website and then click add and close. Log off and reboot.
I live on Mozilla on all my devices. I recommend it to anyone who has not been introduced yet. I cringe to think of being forced to use internet explorer!!!
Thank you for all you do!!!

hello ETRU, "compatibility view" is a concept of internet explorer that other browsers do not have. do you have any particular problem viewing it with firefox?

Spry Menu Bar css not compatible with IE7? or compatibility View on IE8?

Well i've made my website
. Swimmerbuddy.com
Problem:I used the spry menu bar on a div tag. I've got it working fine on several browser and so on.. but hmm. i noticed that IE7 and only on compatibility view of IE8 it does not work...
It seems like the drop down menus get cover by the main content underneath it..
I started of with dwt i made my self.This is the DWT and the css that controll the dwt and the spry menu bar.
PLZ HELP ME.. THANKS
THIS IS THE DWT THAT THE PAGE RUNS ON
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>

<link href="../CSS/main.css" rel="stylesheet" type="text/css" />


<style type="text/css">
a:link {
color: #000;
text-decoration: none;
</style>
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
a:visited {
color: #000;
text-decoration: none;
a:hover {
text-decoration: none;
color: #000;
a:active {
text-decoration: none;
</style>
</head>
<body>
<div id="wrapper">
<div id="header">
    <div id="networkicons"><a href="http://www.facebook.com/?ref=logo#!/profile.php?id=100001554936595" target="_blank"><img src="../_images/facebook.png" alt="facebook.com" width="45" height="45" border="0" title="facebook.com"/></a><a href="http://www.myspace.com/swimmerbuddy" TARGET="_blank"> <img src="../_images/myspace.png" alt="myspace.com" width="44" height="45" border="0" title="myspace.com"/></a><a href="http://twitter.com/swimmerbuddy" TARGET="_blank"> <img src="../_images/twitter.png" alt="twitter.com" width="43" height="45" border="0" title="twitter.com"/></a><a href="http://www.youtube.com/swimmerbuddy1" TARGET="_blank"> <img src="../_images/youtube.png" alt="youtube.com" width="44" height="45" border="0" title="youtube.com"/></a></div>
    <div id="buyNow1">
      <p><a href="../order_now.html"><img src="../buynowbutton.png" alt="bt1" width="130" height="25" border="0" longdesc="Order Your Swimmer Buddy Today!!" /></a></p>
    </div>
</div>
<div id="mainNav">
    <ul id="mainNavcontent" class="MenuBarHorizontal">
      <li><a href="../index.htm">Home</a>        </li>
      <li><a href="../swimmer.html">Swimmer Buddy</a></li>
      <li><a href="../order_now.html">Order Now</a>        </li>
      <li><a href="#" class="MenuBarItemSubmenu">Gallery</a>
        <ul>
          <li><a href="../photo_gallery.html">Photos</a></li>
          <li><a href="../video_gallery.html">Videos</a></li>
        </ul>
      </li>
      <li><a href="#" class="MenuBarItemSubmenu">Zinger Products</a>
        <ul>
          <li><a href="http://www.winkyscoop.com/">Winky Scoop</a></li>
          <li><a href="http://www.1800succeed.com/">Hypmovation</a></li>
          <li><a href="http://www.1800succeed.org/">1800SUCCEED</a></li>
          <li><a href="http://www.zingerproducts.com">Zinger Store</a></li>
        </ul>
      </li>
      <li><a href="../about.html">About Us</a></li>
      <li><a href="../contact.html">Contact Us</a></li>
    </ul>
</div>

<div id="pageInfo">
    <div id="info_page">
      <p class="regionID">Region ID</p>
      <hr class="breaklinePageInfo" />
      <p class="breadcrum">> <a href="../index.htm">Breadcrum </a></p>
    </div>
    <div id="mainContent">
      <div id="content">
        <p>Main Content Goes her</p>
      </div>
    </div>
</div>


   <div id="buyNow2"><a href="../order_now.html"><img src="../buynowbutton.png" width="130" height="25" /></a></div>
   
<div id="footer">
<div id="footertext">
        <p class="footertextclass">Copyright © 2010 SwimmerBuddy.com. All rights reserved. SwimmerBuddy.com is part of <a href="http://www.zingerproducts.com" class="footertextclass">Zinger Products</a>. Designated Trademarks and brands are the property of their respective owners. This page was last modified Setember 28,2010. Swimmer Buddy - Pattent Pending 2010</p>
      </div>
    <div id="footerlinks">
        <p classs="footerlinkspacing"> <span class="footerlinkspacing"><a href="../Disclaimer.html">Disclaimer</a><a href="../terms.html"> Term of Service </a><a href="../contact.html">Contact Us</a></span>
</div>
      </div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("mainNavcontent", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
THIS IS THE MAIN.CSS
@charset "utf-8";
#networkicons {
height: 50px;
width: 200px;
margin-top: 160px;
margin-left: 15px;
position: absolute;
#wrapper {
width: 933px;
margin-top: 0px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
text-align: left;
position: relative;
#mainNav {
text-align: center;
position: relative;
margin-right: auto;
margin-left: auto;
width: 934px;
padding-bottom: 15px;
clear: both;
overflow: visible;
#navwrapper {
width: 935px;
margin-right: auto;
margin-left: auto;
#mainContent {
width: 910px;
padding-left: 10px;
padding-right: 10px;
position: relative;
padding-bottom: 20px;
padding-top: 20px;
#content {
width: 910px;
position: relative;
#wrapper #footer #footerlinks p .footerlinkspacing a {
margin-right: 20px;
#footer {
width: 930px;
background-color: #fff;
position: relative;
margin-top: 5px;
text-align: center;
color: #000;
padding-bottom: 10px;
margin-bottom: 15px;
#header {
width: 930px;
height: 209px;
background-image: url(../_images/header.jpg);
background-repeat: no-repeat;
#buyNow1 {
height: 25px;
width: 140px;
float: right;
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
text-align: center;
background-repeat: no-repeat;
color: #666;
padding: 5px;
position: absolute;
top: 160px;
right: 150px;
.buyNow1 {
color: #666;
#wrapper #pageInfo #info_page .breadcrum {
color: #003;
#wrapper #pageInfo #info_page .breadcrum a {
color: #003;
html, body {
margin: 0px;
padding: 0px;
#buyNow2 {
height: 25px;
width: 130px;
float: right;
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
text-align: center;
padding: 5px;
position: relative;
#wrapper #buyNow2 a img {
position: absolute;
top: -30px;
right: 50px;
border-top-width: 0px;
border-right-width: 0px;
border-bottom-width: 0px;
border-left-width: 0px;
border-top-style: none;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;
#pageInfo {
width: 930px;
background-image: url(../_images/pageinfobackground.jpg);
background-repeat: repeat-x;
background-color:#FFF;
text-align: left;
padding-bottom: 15px;
margin-top: 18px;
position: relative;
overflow: visible;
visibility: visible;
#wrapper #mainNav #mainNavcontent {
position: absolute;
left: 0px;
width: 930px;
.regionID {
font-size: 2em;
font-weight: bold;
color: #FFC;
margin-top: 1em;
margin-bottom: 0em;
text-align: left;
margin-left: 5px;
.breaklinePageInfo {
margin-top: 0.5em;
color: #FAFEAB;
.breadcrum {
color: #003;
font-size: 1.1em;
font-weight: bold;
text-decoration: underline;
margin-top: -0.2em;
margin-left: 15px;
#breadcrum {
font-weight: bold;
color: #003;
#footertext {
width: 910px;
font-size: 0.6em;
padding-left: 10px;
padding-right: 10px;
margin-top: 10px;
#footerlinks {
width: 930px;
font-size: 0.7em;
font-weight: bold;
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
color: #000;
position: relative;
margin-top: 10px;
margin-bottom: 5px;
.footertextclass {
color: #000;
.footerlinkspacing {
margin-top: -0.5em;
color: black;
height: 10px;
font-style: normal;
line-height: normal;
font-variant: normal;
letter-spacing: normal;
p {
margin: 0px;
padding: 0px;
body {
text-align: center;
margin-top: 5px;
background-color: #073e78;
background-image: url(../_images/background.jpg);
background-repeat: repeat-x;
background-attachment: scroll;
font-size: 100%;
THIS IS THE dropdown menu.css
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0px;
padding: 0;
list-style-type: none;
font-size: 100%;
position: static;
text-align: center;
cursor: pointer;
width: 132.8px;
float: left;
overflow: visible;
visibility: visible;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 132.8px;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: #333;
color: #FFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #FFF;
padding: 0.5em 0.75em;
color: #333;
text-decoration: none;
background-image: url(../_images/bar-top.png);
background-repeat: no-repeat;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
color: #003;
background-image: url(../_images/bar-Bottom.png);
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
color: #003;
background-image: url(../_images/bar-Bottom.png);
background-position: bottom;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(../_images/bar-topsub.png);
background-repeat: no-repeat;
background-position: right top;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(../_images/bar-topsubhover.png);
background-repeat: no-repeat;
background-position: right bottom;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;

Thanks a lot for that tip. It does improve it by a whole lot.. i c what my mistake was.. however, something is still off
.. The Drop down menu is not behaving well...
As you may c by the picture, the drop down menu now moves to the right. and is not because of the object to its left, i've modified that. Zinger Products Drop Down Menu also does the same.

How do you remove a web address from compatibility view option using a script?

How do you remove a web address from compatibility view option in IE using a script or a GPO?
Not seeing any options.
Casey
This topic first appeared in the Spiceworks Community

luckyfromhialeah wrote:
How do you remove a web site from popular list?
If you mean from the Safari menubar item "Popular"
Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard.

Urgent : SSRS reports zoom in option is not working in IE9 compatability view

Hi,
We have SSRS reports which when viewed in IE 9 compatability view, zoom in option is not working properly.
SSRS report have 4 charts inside a rectangle. when zoom in from 100% to 50% only rectangle shrinkes not the charts.
Please let me know why it is happening and solutions if any?
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Hi Wendy Fu,
Thanks for your support. Below are the steps and screenshots as per your requirement.
/*******************Below are the steps to replicate ************************/
This document explain IE9 compatibility issue with SSRS report (SSRS 2008 R2 and IE9)
Tools and software used:
Reports are rendered on Share Point 2010 server which uses SSRS 2008 R2.
Reports are accessed using web browser IE9, IE10 ….
Problem statement:
To work OTHER reports compatibility mode in IE should be ON
To work SSRS reports (mainly zoom) compatibility mode in IE should be OFF
OTHER report is being used by customer and they will start using SSRS reports as well. While using both OTHER reports and SSRS reports customer do not prefer to keep switching between compatibility modes.
“Browser Mode: IE9”
Steps to reproduce Zoom issue for SSRS report with Compatibility mode is given below:
Step-1: Select Tools menu -> Compatibility View Settings
Below setting is suggested for OTHER users so tick as shown below,
Step-2: On decision center select link and Open the report home page and click the link to open the report.
Step-3: On SSRS reports Change Zoom level from 100% to say 50%. Here all charts are not moved with container frame.
If “Browser Mode: IE8” is set with following steps then this issue does not happen.
Press F12 and from and select IE8 as shown below.
Press F12 again so this will set the mode and then try Zoom option it works fine. However this setting temporary and will remain for the session only.
If compatibility mode is OFF then also this does not happen. Please see image below.
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Add a website to Compatibility view settings in IE11

hi
I am able to add "Microsoft.com" to compatibility view settings in IE10 through c# console code.
Now the same code is giving me error in IE11 as "Compatibility view settings cannot be changed".
Please help me how to add Microsoft.com to compatibility view settings in IE11?
is it possible to add any websites to compatibility view settings.?

Hello Srinivas,
In order to add a website under compatibility list please do the following:-
Press the Alt key to display the menu bar.
Click the Tools menu and choose Compatibility View Settings.
Write the name of the website you wish to add under compatibility settings and then click on add.
Hope that helps!
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

What do I need to do to set IE11 to show a specific site in compatibility view?

We have a legacy site which needs to be in the compatibility view settings in IE11 on our Win 7 workstation (and Win 2012 RDS).
On a test machine in a test OU, I have set a new IE group policy which only contains one setting, which is:
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Windows Components/Internet Explorer/Compatibility View
Policy
Setting
Comment
List of sites
*.domain.com
Our domain is functional level 2003, but we have 2012 DCs (mainly) and I generally do Group Policy administration on a Win 7 machine using RSAT. I mention that in case any of that is the explanation for this result.
On GP results, that IE Compat View policy with the single setting is denied on that machine because it is empty.
Denied GPOs
Name
Link Location
Reason Denied
Internet Explorer CompatView Config (Computer Only)
contonso.local/Test/Workstations
Empty
Clearly the GP is not actually empty - so something essential is missing. I wonder if I need to import some IE11 settings files (admx?!) somewhere or if I need to do the Group Policy editing on the 2012 DC instead of on the Win 7 RSAT? I've read
a little about importing admx files, but wouldn't really be sure of how to do it the right way.

Hi,
Maybe you should first import the IE 11 Administrative Templates file when you modify the settings on Windows 7. For details about how to import these ADMX files.
Administrative Templates for Internet Explorer 11
http://www.microsoft.com/en-us/download/details.aspx?id=40905
Internet Explorer 11 Administrator Templates
http://www.grouppolicy.biz/2013/11/internet-explorer-11-administrator-templates/
Since you mentioned you have a Windows Server 2012 DC in your domain, if it is a R2 version, you do not need to import the ADMX file, the Internet Explorer 11 Administrative Template files
are already installed.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

View/Resolution/Font is incredibly small resulting in web pages not displaying properly (Facebook) & I can not find internet tools options or compatibility view otions

I've tried different things to adjust this problem on my laptop, but nothing is working. I uninstalled firefox because this was very irritating. I just reinstalled after being away for 2months and the problem still exists. My laptop settings are for normal display and font sizes and everything is normal when I use internet explorer, but when I use firefox...everything shrinks. When I'm on facebook using apps...it gets even smaller and app screens will not display properly. There is no internet options or compatibility view settings on this new firefox that I can find and I'm out of ideas on how to fix this.

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How do I view videos in compatability view?

I am mandated by my school district to watch videos from Region 10. They have to be viewed in in Internet 7 format. Region 10 shows a visual picture about how to do that by going under TOOLS and clicking on COMPATABILITY VIEW SETTINGS, then click on the checkbox DISPLAY ALL WEBSITES IN COMPATIBILITY VIEW. My computers is Windows 7, Internet Explorer 64 bit

Firefox doesn't have a "compatibility view". It doesn't need one like IE does, because Firefox has always been "compatible" with published web standards, unlike IE wasn't for many years.
What problem are you having with viewing those videos? <br />
Are those videos supposed to play with the Windows Media Player? <br />
If so, you need to install the WMP Plugin for Firefox. <br />
http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download <br />
https://support.mozilla.com/en-US/kb/Using+the+Windows+Media+Player+plugin+with+Firefox

How to set IE compatibility view programmatically in Browser Helper Object?

Goal: In IE11, I need to set "IE=EmulateIE7" compatibility view for particular websites.
Adding an HTML meta header or a HTTP response header is not an option as we do not control the websites. Configuring IE (Tools > Compatibility View settings...) is not fine-grained enough as it truncates the website URL to the second and top level domains.
My approach is to achieve the same but more fine-grained with the help of a Browser Helper Object (BHO). Is this possible at all?
I created a C# Hello World BHO according to an online sample. It works in IE9. I haven't tested it in IE11 yet. Now I need to add some flesh to the bone. My idea is to register with the appropriate WebBrowser event, check the URL being retrieved, and then
set a WebBrowser property to turn on compatibility view if necessary.
Is this feasible?
Which WebBrowser event would that be? DownloadBegin or DownloadEnd? Other?
pure guess: WebBrowser.PutProperty("X-UA-Compatible", "IE=EmulateIE7")?
Any ideas to cut down my trial-and-error space? Thanks a lot!
PS: I (prematurely?) posted this question last night on stackoverflow.com.

The compatibility list is more about developer and user preference and Microsoft tends to not provide API to override preferences.
If the user accepts launching a separate window to render the content in some alternative browser (pretty much like viewing source in Notepad) you can modify the browser emulation registry value before launching your own webbrowser control based application.
Visual C++ MVP

Need to add a website via compatibility view but can't figure out how.

I try to go to a website that tells me that I need IE 6.0 or greater. I have a brand new Excite Pure AT15-A/16GB. I'm assuming this has an up-to-date IE, but I still can't view the site. I tried to go to the gear icon when I open google to access compatibility view, but it's not there. Any other suggestions?

The website doesn't require IE. Saying version is too low means it lacks some feature. Try other browsers such as firefox, chrome or Opera.

IE8 compatibility view on Intranet

Hi all,
I have an ADF web-app that will be used on the intranet, but we have a problem with IE8, which by default sets compatibility view on for all websites on the intranet.
What happens is that the weblogic server sends the CSS for IE 7 instead, and have some strange JavaScipt behaviors.
Is there any way to correct this, without modifying IE settings?
Thanks in Advance

public class IECompatibilityPhaseListener implements PhaseListener {
    public IECompatibilityPhaseListener() {
        super();
    public void afterPhase(PhaseEvent phaseEvent) {
    public void beforePhase(PhaseEvent phaseEvent) {
      FacesContext fctx = FacesContext.getCurrentInstance();
      ExternalContext ectx = fctx.getExternalContext();
      HttpServletResponse response = (HttpServletResponse) ectx.getResponse();
      response.addHeader("X-UA-Compatible", "IE=edge");
    public PhaseId getPhaseId() {
        return PhaseId.RENDER_RESPONSE;
}with the example above it makes sure that compatibility mode is not set by the user. But it still doesn't override the intranet compatibility view setting.

Wildcards in Compatability View

I have over 100 sites to add to Compatability View settings in IE 11. I have a few questions regarding this.
1. Is there a limit on the number of sites that can be added?
2. Is there a way to import a list of sites? I have to add these sites so many computers. It would be easier to do it once and then import it on the other computers.
3. Can you use wildcards to add a group of sites?
For example: I need to add several sites using their IP address. the only thing that will change is the last to octives.
192.168.x.x.

Hi,
Until now I don’t found there have limit number and we can’t use the wildcards with compatibility setting. If you want to import a batch sites you can use GPO setting.
The related article:
How to add web site to Compatibility View List via GPO
http://blogs.msdn.com/b/asiatech/archive/2013/10/23/how-to-add-web-site-to-compatibility-view-list-via-gpo.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to control IE10's "Compatibility View settings" via Group Policy

First
of all thanks for taking the time to read this. I must let you know that I have limited experience with Group Policy so here it goes...
Domain Controllers are 2008 R2 Datacenter and client computers are Win7 Pro with IE10
I need to add several sites to the "Compatibility View settings" in IE10 and have these pushed out via Group Policy.
I followed this to enable the "Use Policy List of Internet Explorer 7 sites:"
Use
Policy List of Internet Explorer 7 sites
I even added the settings to both User Configuration as well as Computer Configuration. However the computers on the domain wouldn't show these sites in
IE even after forcing a GP update (gpupdate /force)
Yes I did use top level domain names.
Next I installed the Administrative Templates for Windows Internet Explorer 10 on the DC:
Administrative Templates for Windows Internet Explorer 10
this gave me an Inetres.adm file while I put in the same location as my other .adm files that Group Policy Manager sees (located at C:\Windows\SYSVOL\domain\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Adm)
I do see a bunch of .ADMX files located at C:\Windows\PolicyDefinitions
on the DC. I also see a lot of .ADML files located at C:\Windows\PolicyDefinitions\en-US.
Where is my Central Store located that my Group Policy references? How do I know what location GP is reading from?
Now I installed the Administrative Templates (ADMX) for Windows Server 2008 R2 and Windows 7 from here:
Administrative Templates (ADMX) for Windows Server 2008 R2 and
Windows 7
This gave me a "Win7-2008R2-admx.msi" package that I installed. I took the defaults and extracted contents to:
C:\Windows\PolicyDefinitions\Server 2008 Win7\PolicyDefinitions
Are all of these .ADMX files supposed to be placed into my Central Store?
If I mouse-over "Administrative Templates" in Group Policy Manager is says that the policy definitions are retrieved from the local machine.
I then right-clicked on top of "Administrative
Templates" in Group Policy Manager and highlighted Inetres and selected Delete.
While in Add/Remove Templates I click on Add and it defaults to looking for "Policy Templates" and will not let me select and .ADM/.ADML/.ADMX files.
What am I doing wrong here?
How do I know that I'm using the most recent Inetres file?
How do I know which file Group Policy Manager is using to manage the IE settings that are in:
User Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of Internet
Explorer 7 sites
or
Computer Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of
Internet Explorer 7 sites.
Is there anything else you can suggest?
Many, many thanks in advance for any response

Hi,
Regarding your question, usually we create a Central Store for Administrative Templates (Both .admx and .adml files), and create a folder that is named PolicyDefinitions in the following location:
\\FQDN\SYSVOL\FQDN\policies. The .adml files on the Windows computer
are stored in a language-specific folder. For example, English (United States) .adml files are stored in a folder that is named "en-US." When you have copied all .admx and .adml files, the PolicyDefinitions folder on the domain controller should contain the
.admx files and one or more folders that contain language-specific .adml files.
Please refer to the following articles. You will get more helpful details about the Central Store for Group Policy Administrative Template files.
How to create the Central Store for Group Policy Administrative Template files in Windows Vista
http://support.microsoft.com/kb/929841
Windows 7, Windows Server 2008 R2 and the Group Policy Central Store
http://blogs.technet.com/b/askds/archive/2009/12/09/windows-7-windows-server-2008-r2-and-the-group-policy-central-store.aspx
Based on your description, I understand you enable the setting “Use Policy List of Internet Explorer 7 sites”. However, didn’t show any sites in IE in client even after forcing a GP update
(gpupdate /force). Please use command “gpresult” in clients to collect the GPOs, and then check whether the GPO contain the setting “Use Policy List of Internet Explorer 7 sites” was applied to clients or wasn’t.
In addition, you also can change the related setting by using registry directly.
Follow the path of the registry:
HKEY_CURRENT_USER->Software->Policies->Microsoft->Internet Explorer->BrowserEmulation->PolicyList. (Create registry folders
manually if not present)
Right Click
PolicyList ->New->String Value->Enter the name of the website. (Both under ‘Name’ and ‘Data’. For example,
Value name: example.com Value data: example.com)
There is a similar question, please read as a reference.
Add manually URL on Compatibility View List in IE10
http://social.msdn.microsoft.com/Forums/ie/en-US/5a15e861-d106-471e-a968-fdea15e31c45/add-manually-url-on-compatibility-view-list-in-ie10
Hope this helps.
Best regards,
Justin Gu

How to deal with IE compatibility view?

So, I have a site with menu pinned to left corner. www.hvtech.cz
It's fine in all browser except (of course) IE. When visitor with compatibility view enabled load my site, menu is black and not clickable. When they turn off this view its fine, but most of them dont even know there's such function. So is there anything to do about that?
Also on my other site www.hecl-nabytek.cz the 100%width rectangle filled with picture disapears with compatibility view on..

Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic

Compatibility view

Similar Messages

Maybe you are looking for