Compile new version on net-snmp.

Hello
i would like to know if it possible to compile; install a new version to net-snmp in solaris 10. there is already one version running with svc:/application/management/sma:default
how can i compile a new version and replace this one, (smf manifest, etc) do i just edit the sma.xml and point it to the new executable in <exec_method..?
the compiled version would run in /usr/local.
thank you very much for your input.
Mario G.

It's preferable to just install it to a new location and then create a new xml file for it.
Then import the manifest file and disable the one that ships with Solaris.
The rationale is that if anything happens to the system then Sun can't point a finger in your direction.
alan

Similar Messages

  • Net-SNMP 5.0.9 used in Solaris 10 sma

    We are using AgentX protocol in an application sub-agent
    According to Net-SNMP change log, AgentX protocol support was experimental up to release 5.0.7 but going to the following link:
    http://net-snmp.sourceforge.net/tutorial/tutorial-5/toolkit/demon/index.html
    "The AgentX support in net-snmp versions prior to 5.1 is beta level quality. Although many people have used it successfully, we strongly recommend AgentX sub-agent developers use 5.1.2 or higher."
    Why is the Net-SNMP version so low in the Solaris 10 sma build? Cureent version is 5.3.0.1

    Hello.
    I would also like to know how to upgrade the version of net-snmp that the System Management Agent uses so that I can monitor servers with more than one CPU.
    Any guidance much appreciated.
    Thanks

  • Downloading new version of itunes and it crashes my internet. Ipod touch will not run with out new version. Have done many system restores and reset internet settings but still crashes net when i download any version HELP please

    running windows vista prem. every time i try and down load the new version of itunes to laptop the net crashes when instalation is complete.
    Unable to conect to the net  and so unable to sync new ipod touch i then run a system restore.Then try and install itunes again . same thing happenes again
    Any help please

    There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

  • Newer version of the program of native compilation NCOMP

    Hi,
    I tried to use the ncomp program to make native compilation of a jar file in an Oracle 8.1.7 Database on Unix platform with jdk 1.2.2.
    It returns an error :
    Set the JAVA_HOME to the location of the jdk 1.1.x.
    It seems the version of ncomp I have is unable to work with our jdk 1.2.2
    Where could I find a newer version of ncomp which work with jdk 1.1.2 ?
    Thanks in advance
    Bye
    [email protected]
    null

    see your duplicate posting on metalink.

  • I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste artwork from Word anymore, only directly from the net (where the size or the quality are not always optimal). Any way around this?

    I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste any artwork from Word anymore, only directly from the net (where the size or the quality of the images is not always optimal). Major problem given that I'm in the process of re-ripping some 40K+ songs in Lossless format... Any way around this?

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

  • Building Net-SNMP with gcc and Solaris 10's Forte-built Perl

    The 5.0.9 Net-SNMP that come with Solaris SPARC is too old for our users. Building the latest version appears to be basically impossible and I'm just about to bail and just build yet another version of Perl for Solaris 10 so it will work. But on the chance that someone has done this:
    I am trying to build Net-SNMP 5.4.1.2 with the Sunfreeware gcc. The configure script seems to ignore the --disable-perl-cc-checks flag:
    ./configure with-perl-modules disable-perl-cc-checks
    configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).
    Has anyone successfully done this? I was hoping to get a successful configure run, then build the binaries, and then further tweak the perl makefiles with "GCC=/usr/perl5/5.8.4/bin/perlgcc" or something.

    configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).The perl supplied by Sun should be compiled with Sun Studio and the error mentioned above seems to reflect this.
    So, either build perl first with sunfreeware's gcc and then move on to net-snmp or install and use Sun Studio instead of gcc so perl is happy.
    alan

  • Quicktime installer thinks that I have a newer version installer

    I have tried everyone of the suggestions concerning
    uninstalling/reinstalling quicktime. The net result
    is that now the latest quicktime only installer (7.1.3.100)
    fails with the message "A newer version of quicktime is
    already installed". My OS is Windows XP SP2 Build 2600.
    Thanks in advance for any help.
    Nath Rao

    I had iTunes (not sure of the version any more). I had problem
    with ipod not being recognized. I tried to upgrade iTunes.
    The installer seemed to work, but would not run. I then
    want to do the installations piece by piece, and that is
    when the problem with QuickTime became apparent. At this
    point, according to add/remove programs, I have neither
    iTunes, nor QuickTime.
    Nath Rao

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • Error when deploying new version of application on ALBPM 6.0.4

    I keep getting this error on our dev box when trying to deploy a new version of the application: <May 21, 2010 12:25:41 PM CDT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.invoke(Ljavax.management.ObjectName;Ljava.lang.String;Ljava.rmi.MarshalledObject;[Ljava.lang.String;Ljavax.security.auth.Subject;)
    The system is ALBPM 6.0.4/WL 9.2/solaris
    BEA AquaLogic(TM) BPM Enterprise for Application Server
    Version: 6.0.4
    Build: #98853
    I have posted the full stack trace below, can anyone offer any assistance?
    -Dan
    Error Message info
    RuntimeException thrown in operation replaceProcessDefinition
    Caused by: cannot assign instance of fuego.resources.Msg to field fuego.lang.DefaultException.msg of type fuego.resources.Msg in instance of fuego.lang.DefaultRuntimeException$MyDefaultException
    javax.management.RuntimeMBeanException: RuntimeException thrown in operation replaceProcessDefinition
         at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:195)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:224)
         at javax.management.remote.rmi.RMIConnectionImpl_922_WLStub.invoke(Unknown Source)
         at weblogic.management.remote.common.RMIConnectionWrapper$15.run(ClientProviderBase.java:606)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.security.Security.runAs(Security.java:61)
         at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:604)
         at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
         at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
         at $Proxy25.replaceProcessDefinition(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:592)
         at fuego.mami.engine.jmx.EngineManagementJmxAdaptor$JmxEngineManagementProxy.invoke(EngineManagementJmxAdaptor.java:264)
         at $Proxy25.replaceProcessDefinition(Unknown Source)
         at fuego.mami.engine.jmx.EngineManagementJmxAdaptor.replaceProcessDefinition(EngineManagementJmxAdaptor.java:201)
         at fuego.mami.ProjectManager.notifyEngine(ProjectManager.java:1341)
         at fuego.mami.ProjectManager.notifyEngines(ProjectManager.java:642)
         at fuego.mami.DeploymentTopology.notifyEngines(DeploymentTopology.java:958)
         at fuego.webconsole.model.JSFDeploymentTopology.deployAction(JSFDeploymentTopology.java:766)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:592)
         at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)
         at javax.faces.component.UICommand.broadcast(UICommand.java:312)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
         at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
         at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.ClassCastException: cannot assign instance of fuego.resources.Msg to field fuego.lang.DefaultException.msg of type fuego.resources.Msg in instance of fuego.lang.DefaultRuntimeException$MyDefaultException
         at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2004)
         at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1184)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1914)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
         at weblogic.rmi.extensions.server.CBVInputStream.readObjectInternal(CBVInputStream.java:71)
         at weblogic.rmi.extensions.server.CBVInputStream.readObject(CBVInputStream.java:65)
         at weblogic.rmi.internal.ServerRequest.unmarshalThrowable(ServerRequest.java:352)
         at weblogic.rmi.internal.ServerRequest.getThrowable(ServerRequest.java:62)
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:203)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
         at javax.management.remote.rmi.RMIConnectionImpl_922_WLStub.invoke(Unknown Source)
         at weblogic.management.remote.common.RMIConnectionWrapper$15.run(ClientProviderBase.java:606)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.security.Security.runAs(Security.java:61)
         at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:604)
         at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
         at fuego.server.jmx.mami.ClusterAwareEngineManagement.invokeMethod(ClusterAwareEngineManagement.java:389)
         at fuego.server.jmx.mami.ClusterAwareEngineManagement.distributeVoidMethod(ClusterAwareEngineManagement.java:345)
         at fuego.server.jmx.mami.ClusterAwareEngineManagement.distributeVoidMethodWithStringParameter(ClusterAwareEngineManagement.java:276)
         at fuego.server.jmx.mami.ClusterAwareEngineManagement.replaceProcessDefinition(ClusterAwareEngineManagement.java:143)
         at fuego.server.jmx.mami.JmxEngineManagement.replaceProcessDefinition(JmxEngineManagement.java:200)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
         at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:149)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:149)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:426)
         at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:377)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:375)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:310)
         at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
         at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
         at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
         at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
         at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:550)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:440)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:436)
         at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:58)
         at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:975)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Edited by: drkduncan on May 21, 2010 12:02 PM

    Lightroom 2.7 cannot use RAW photos from a Canon 5D Mark III. You need at least Lightroom 4.1
    Search for 0xc000007b here at the Adobe forums to find the answer.

  • I downloaded new version but firefox still says I need to update - why, and if there's an "install" step I'm missing why are there no instructions on how to do so???

    Why does Firefox insist that I'm still using version 3.whatever when I have faithfully downloaded new versions when it tells me to do so -- most recently version 8.whatever (today). If "downloading" isn't enough and there's also an "install" step, I have yet to find anywhere in the Firefox that tells me how to do so. I have restarted my computer, but that doesn't seem to make any difference. It still tells me I'm using an outdated version that soon will not be supported.

    What you are seeing sounds like the "advertised update" from Firefox 3.6 versions to Firefox 8.0.1 that started on 2011-12-01. See --> https://wiki.mozilla.org/Releases/Firefox_3.6_MU
    This is the same as has occurred when prior versions were nearing their end-of-life. Support for Firefox 3.6 versions is likely to end in the first quarter of 2012.
    There are changes in the interface from Firefox 3.6 to Firefox 4 and newer versions. See --> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox
    The new Firefox version can be made to closely resemble the 3.6 Firefox interface.
    #See --> http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
    #See --> http://blog.fligtar.com/2011/01/16/how-to-customize-firefox-4s-ui/
    #See --> '''''Firefox 3 Theme for Firefox 4''''': https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
    #*Add color home, back/forward and other buttons (like Firefox 3) to the Navigation Toolbar in place of the gray buttons in Firefox 4
    #*See: http://ffaddons.game-point.net/ff3ff4/
    #Also see --> http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
    The only currently supported versions are 3.6.24 and 8.0.1. Firefox 9.0 will be released on or about 2011-12-20 and will completely replace Firefox 8.0.1; an update to Firefox 3.6.25 from Firefox 3.6.24 will likely occur around that same time to correct any new security/stability issues found in Firefox 3.6.24.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Error in new version map viewer

    Dear Sir,
    i am trying to install new version 11 mapviewer and its giving following error please can any one help me in this issue
    E:\Mapviewer11\MapVQuickstart\mv10131rc1_qs\oc4j\j2ee\home>java -jar oc4j.jar
    2006-09-24 22:35:20.540 NOTIFICATION JMSServer[]: OC4J JMS server recovering tra
    nsactions (commit 0) (rollback 0) (prepared 0).
    2006-09-24 22:35:20.540 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
    al transactions Queue[jms/Oc4jJmsExceptionQueue].
    2006-09-24 22:35:20.743 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
    al transactions Queue[jms/jobstore].
    2006-09-24 22:35:20.852 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
    al transactions Queue[jms/events].
    2006-09-24 22:35:20.993 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
    al transactions Queue[jms/notifications].
    2006-09-24 22:35:21.071 ERROR jms.xml: port 9,127 already in use.
    06/09/24 22:35:21 *** (SEVERE) jms.xml: port 9,127 already in use.
    2006-09-24 22:35:21.071 ERROR Failed to set the internal configuration of the OC
    4J JMS Server with: XMLJMSServerConfig[file:/E:/Mapviewer11/MapVQuickstart/mv101
    31rc1_qs/oc4j/j2ee/home/config/jms.xml]
    06/09/24 22:35:21 *** (SEVERE) Failed to set the internal configuration of the O
    C4J JMS Server with: XMLJMSServerConfig[file:/E:/Mapviewer11/MapVQuickstart/mv10
    131rc1_qs/oc4j/j2ee/home/config/jms.xml]
    2006-09-24 22:35:21.087 ERROR J2EE OJR0011 Exception starting JMS server: Failed
    to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConf
    ig[file:/E:/Mapviewer11/MapVQuickstart/mv10131rc1_qs/oc4j/j2ee/home/config/jms.x
    ml]
    2006-09-24 22:35:21.290 ERROR J2EE RMI0002 Error starting ORMI server wrk05-mkab
    eer port 23,791: Address already in use: JVM_Bind
    2006-09-24 22:35:21.290 ERROR java.net.BindException: Address already in use: JV
    M_Bind
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
    at java.net.ServerSocket.bind(ServerSocket.java:318)
    at java.net.ServerSocket.<init>(ServerSocket.java:185)
    at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:4
    01)
    at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.jav
    a:313)
    at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:194)
    at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer
    .java:2235)
    at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.jav
    a:914)
    at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLa
    uncher.java:113)
    at java.lang.Thread.run(Thread.java:534)
    06/09/24 22:35:21 Error starting ORMI server wrk05-mkabeer port 23,791: Address
    already in use: JVM_Bind
    06/09/24 22:35:21 Shutting down OC4J...
    waiting for immediate reply
    Thanks
    Kabeer

    It seems that you have an instance already running. Verify if you don't have an OC4J running.

  • When firefox trys to auto update, or I manually download the new version, or some but not all downloads off of the web, I get this error message. C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.

    First off, when firefox trys to auto update, it fails. It tells me to try and download the new version from mozilla's site. When I try to download the new version I get this: (C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.)
    This is the same message I have been getting when I try to download other things off the net. (When I use other browsers to download I dont have this problem)

    Please help.
    It is getting worse
    Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
    Please help.

  • Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X

    I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
    It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
    With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
            // create shipping slip hyperlink
            string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
            HyperLink hlLtrShipPdf = new HyperLink();
            hlLtrShipPdf.Text = "Ltr Shipping Slip";
            hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
            hlLtrShipPdf.Target = "_blank";
            pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
    I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
    I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
    Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.

    Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

  • New version of the LabHSM Toolkit for Complex Event-Driven Development is Now Available!

    A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a higher level of abstraction and agile software development methodologies. These active object VIs are created based on a universal Hierarchical State Machine ( HSM or statechart ) template. Therefore, all your code looks similar regardless of its functionality!
    So, what’s new in version 1.1?
    • "No hands" block diagram modifications! Version 1.1 actually creates, renames, and removes actions on the block diagram as you define, rename, and remove them in the editor! (No, it can't fill in all the details for you, but it can do some, if you think ahead, by replicating similar actions.)
    • Two new screens, Events Usage and Actions Usage, (available in licensed copies only) clearly show where (in which state(s)/transition(s)) and how (is it an entry action, exit action or event handling action?) a particular event or action is used. Moreover, if after selecting an instance on the list, the Go To button is pressed, it makes the main screen jump to respective location in the HSM structure. In the case of Actions Usage screen, the respective action is also displayed on the block diagram. Thus, these screens provide two more different cross-sections of the HSM data set and two additional ways to navigate it – now along the Actions and Events dimensions too instead of just the state tree in the first version.
    • Version 1.1 can duplicate events or actions, which helps when you've got several that are similar. Changes in the events and actions lists are reflected immediately on the main screen and on the block diagram (which solves the previous problem of deleting a renamed event or action when it's still in use).
    • The Events and Actions List Editors are no longer modal and neither are the Events and Actions Usage screens, so you can have all the panels and the block diagram visible and move freely among them as you build your HSM (a good argument for an even larger monitor).
    • When you save an HSM file, version 1.1 automatically adds the .hsm extension if you leave it out and it remembers the last directory you used.
    • The Loaded VIs utility now can open and close block diagrams (if they are not protected with a password) and display only VIs with modal front panels, if desired—useful for quickly finding and closing accidentally opened (e.g., from the hierarchy window) modal VIs. Make a modal version of this utility and keep it on the Desktop for this purpose.
    • A new example of a simple hierarchical state machine and two more excellent tutorials from Paul F. Sullivan (SULLutions.com) are included into the package. The tutorials are also available online. The overview article has also been extended.
    As before, the LabHSM toolkit is available for UNLIMITED PERIOD trial. Please visit http://www.labhsm.com for details and download. The site also contains references which you may want to check to learn more about hierarchical state machines and active object computing.
    Stanislav Rumega
    NI Certified LabVIEW Developer
    H View Labs
    http://www.labhsm.com
    [email protected]
    US Toll-Free Phone/Fax: 877-570-8684

    I am not really sure if Azure support this but its worth to make your configuration file to support .NET 4.0
    $PShome\PowerShell_ISE.CONFIG and $PSHOME\PowerShell.exe.config will be not existing.
    So you can make an entry in configuration to support .NET framework 4.0
    like shown below
    $config_text = @"
    <?xml version="1.0"?>
    <configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"/>
    <supportedRuntime version="v2.0.50727"/>
    </startup>
    </configuration>
    $config_text| Out-File $pshome\powershell.exe.config
    $config_text| Out-File $pshome\powershell_ise.exe.config
    Close PowerShell Console and open as administrator.
    Try loading the modules back and let me know.
    Regards Chen V [MCTS SharePoint 2010]

  • InDesign CS2 - 100 document limit and compatibility with newer versions

    Hello,
    I have Adobe InDesign CS2 and am using it to compile a large report. I have come across a problem once i tried to add more than 100 documents to my book and now see there is a 100 file limit to books in CS2. Each document needs to stay as a single file so i am unable to join files to overcome this problem.
    I have a summary table at the beginning of the document detailing the title of each file in the book. I am unable to work out how to create page hyperlinks in the pdf to the second book (documents over the 100 mark).
    It has since come to fruition that my company has updates to CS3 and CS5 and that these new versions do not have a 100 file limit in creating books. This document i am creating is over 400 pages long so i am wary of upgrading to a new version when i am not far from publishing.
    Should i have any concerns in upgrading to a new version of InDesign when i have almost finished my report? Would it be better to just upgrade to CS3 and not make such a large jump to CS5? Or does anyone know how to create page hyperlinks in my pdf to the files contained in the second book?
    Thanks for any help! Much appreciated.

    Normally I would advise against changing versions in midstream on a project like this, but I'm not sure you have a choice. My instinct is there will be fewer issues moving to CS3 than CS5, but there are far more features in CS5 you might like to use...
    One way to limit the possible anomalies would be to export all the CS2 files to .inx na open those in CS5, rather than converting the .indd files directly, then save as new CS5 .indd files and add to a new book. One very serious issue you may run into wehn moving to a later version is that the text engines are updated and text won't necessarily flow exactly the same, particualry justified text, which can cause line endings to move and some paragraphs may gain or lose a line, which can have a really devastating effect on a long doc if it causes a page count to shift. The killer is that the changes normally don't happen until you start to edit text in that story. I believe the .inx route will force a recompose on opening, but I'm not dead certain, so take a look at http://indesignsecrets.com/force-text-reflow-when-indesign-forgets-to-flow-the-text.php to see how to force the recompose manually as soon as you open the file (you'd only need to do it once, before saving in the new version, for each file), then check carefully for oversets or other problems. Live preflight in CS5 can help with that.
    As you can tell, a successful move to a newer version is likely to be a lot of careful work preparing and checking the files. Some of it can be automated (the export to .inx, the recompose, and the save in the new version) by scripting, but in all honesty you're going to need to check every page when you are done.
    One of the others who uses Hyperlinks will need to weigh in on ID's native abilities and linking to other files in a book. I know that doing that with cross-references (which don't even exist natively prior to CS4) is extremely likely to break down at some point and leave you trying to remake them all, and large numbers of links across docs is likely to slow CS5 in particular to a crawl unless all files (at least the ones to which there are links in the doc you are editing) in the book are open.

Maybe you are looking for

  • Finder And All Other Apps cannot be opened...

    First and foremost, I'll give you the specs of my machine: iMac i5 (2010) 4Gbs of RAM 1333 Mhz 10.6 (Snow Leopard) So alas, onto the actual problem. My Mac will start up (kinda slower than normal), and will eventually reach the main screen with the d

  • INT. HDs for MPro in Europe

    Greetings Forum, I need some help finding INT.HDs in Europe. Specifically Spain, but online in Europe works too. What I'm looking for - INT. HD for MacPro 2.66, more than 500gigs in size, good for video editing in non-RAID configuration. Source mater

  • EtreCheck of slow MacPro (HD writing while inactive).

    My MacPro is aggravatingly slow. Even when no apps are open I can hear it working all the time. I've run Console and get hundreds of the following message: 4/3/15 17:22:39.388 com.apple.xpc.launchd[1]: (com.trusteer.rapport.rapportd[97399]) Could not

  • Quick fixes for a snapped headphone jack in the socket...

    Hi all! I have a snapped jack stuck in the headphone socket and was wondering what the options are! New phone/repair is impractical as Ill be buying a new phone when I get back from the hols but just need something to hold me over for a month or so.

  • Client independent settings / crioss client

    Hi all How do i identify the clint independent/ cross client settings in sap ?  Any table ? Regards Swapnil Edited by: swapnil  kelkar on Nov 28, 2009 12:06 PM