Complaince checked
Hi All,
Please help me in understanding/resolving the below questions
1. Can B2B do complaince checked.
2. Can we import different or multiple XSD and ECS files of the same version into B2B
3. Can we import XSD and ECS files of trading partner specific(For every trading partner can we import different XSD and ECS files).
Complaince checked( complaince checked is nothing but data validation, Ex: Sender Id, it should be a 15 characters, its a mandatory, if supplier sending 16 characters, then in B2B it should errored out. in the same way it should check for all the segment and all the values.
Please tell is it possible in B2B.
Regards
cnu
Hi Anuj,
Thanks for quick response
1.What do you mean by version of XSD/ecs? There can be only one ecs corresponding to one doc type and revision. If there are multiple XSD's then you may zip them and upload under one doc type and revision but there will be only one root xsd which will refer other XSD's.
ans: Ex: I have two ecs files, in one of them we have sender ID has a optional and another one has mandatory, in the same way we are dealing with some other values, I created two xsd files from ecs files. Can i import these two ECS files and two xsd files, How and where
2. Yes. For a particular TP, you can override the .ecs file and .xsd file as per your requirement
ans: Could you please help how we can do this?
I am doing in the below way,
partners->protocols->EDI x12 over internet->Document protocol revesion-->doc type
In doc type I am giving name as 850_1 and revision as 5020, then it showing that 850_1 will not crate and i has given 850 then it showing as we cannot create two 850's doctype
Please help me in resolving this
Regards
cnu
Similar Messages
-
Bypassing holds of export documents in complaince check
Hi Experts,
My requirement is to release / bypass the holds in export documents if it is blocked by missing ECCN.
I want to know how I can accomplish this.
There are only 6 BADI's in GTS.. and the one which is used for releasing the blocked documents /SAPSLL/CUHD_RELEASE is not multiple use... and it is used by standard SAP. so I am unable to create a Z implementation of it..
Please give me some ideas how to release the documents.
Quick reply will be highly appreciated.Use specific reasons for release with release codes for your blocked customs documents. This can be done with configuration, but it would be manual and also save the effort for Zdevelopment.
Isn't there a way in which you can maintain statistical ECCN number for your products? Are you using License Management? -
Cisco LMS - Check for multiple words?
Can anyvbody help me out with a Cisco LMS query.
I'm doing a complaince check for snmp-server location
+snmp-server location [#.*#]
But I assume as I've got mulitple words which may vary it shows as not present in the complaince check even though it's in the config.
e.g. snmp-server location Martin's house in the middle of Scotland
I think [#.*#] stands for a missing string but not for multiple words, can anyone help me out with what I could use for multiple words?
Thanks in advance
MartinI could solve the monitoring issue with snmp context configuration. I had to map each OSPF process to a snmp community. So i could retrieve data for each OPSF process. My issue now is how to add multiple communities to an LMS controlled device.
As far as i know, LMS support only one RO community per device.
regards
alex -
I am using Captivate 2.0 and trying to make a SCORM content
that will report user interaction in the new Fronter 7.1
(www.fronter.com). I use the reload SCORM 1.2 player for complaince
check, since I do not have one for SCORM 2004 (
http://www.reload.ac.uk/scormplayer.html)
I have created a test cp file with just one question and 7
slides. I pack the output in .zip with SCORM 1.2.
When loading into the reload player I get the error message
Problem validating manifest
(file:C:/Documents%20and%20Settings/Martin/reload/reload-scorm-player/server/webapps/reloa d-scorm-player/course-packages/22/imsmanifest.xml:
12, 92): cvc-complex-type.3.2.2: Attribute 'xsi:schemalocation' is
not allowed to appear in element 'lom'.
I can see the .xml manifest from Captivate and line 12. The
manifest is posted at the bottom of this page.
Now when I use the LMS system fronter 71, which has SCORM
2004 and SCORM 1.2 support, the whole package loads and reports
pass/fail but not the user interactions. Fronter 71 has support for
this, and I would like to know what I have done wrong. I tried both
SCORM 1.2 and SCORM 2004.
Here comes the manifest for scorm 1.2 and then afterwards for
scorm 2004
<?xml version="1.0" encoding="utf-8" ?>
- <manifest identifier="testthree" version="1.0" xmlns="
http://www.imsproject.org/xsd/imscp_rootv1p1p2"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_rootv1p2"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="
http://www.imsproject.org/xsd/imscp_rootv1p1p2
imscp_rootv1p1p2.xsd
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd
http://www.adlnet.org/xsd/adlcp_rootv1p2
adlcp_rootv1p2.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>1.2</schemaversion>
- <lom xmlns="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemalocation="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd">
- <general>
- <title>
<langstring
xml:lang="x-none">testfour</langstring>
</title>
- <catalogentry>
<catalog>Adobe Captivate Course</catalog>
- <entry>
<langstring
xml:lang="x-none">testthree</langstring>
</entry>
</catalogentry>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none" />
</keyword>
</general>
- <lifecycle>
- <version>
<langstring xml:lang="x-none">1.0</langstring>
</version>
- <status>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Final</langstring>
</value>
</status>
</lifecycle>
- <metametadata>
<metadatascheme>ADL SCORM 1.2</metadatascheme>
</metametadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicallearningtime>
<datetime />
</typicallearningtime>
</educational>
- <rights>
- <cost>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</cost>
- <copyrightandotherrestrictions>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</copyrightandotherrestrictions>
</rights>
- <classification>
- <purpose>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Idea</langstring>
</value>
</purpose>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none">Adobe
Captivate</langstring>
<langstring xml:lang="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="testthree_ORG">
- <organization identifier="testthree_ORG">
<title>testfour</title>
- <item identifier="testone" isvisible="true"
identifierref="testone_RES">
<title>testtwo</title>
<adlcp:maxtimeallowed />
<adlcp:datafromlms />
<adlcp:masteryscore>80</adlcp:masteryscore>
<adlcp:timelimitaction>exit,message</adlcp:timelimitaction>
</item>
</organization>
</organizations>
- <resources>
- <resource identifier="testone_RES" type="webcontent"
href="cap2 1-2.htm" adlcp:scormtype="sco">
<file href="cap2 1-2.swf" />
<file href="cap2 1-2.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>Here is the one for scorm 2004
<?xml version="1.0" encoding="UTF-8" ?>
- <manifest identifier="tthree" version="1.3"
xmlns="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="
http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="
http://www.imsglobal.org/xsd/imscp_v1p1
imscp_v1p1.xsd
http://www.adlnet.org/xsd/adlcp_v1p3
adlcp_v1p3.xsd
http://www.imsglobal.org/xsd/imsss
imsss_v1p0.xsd
http://ltsc.ieee.org/xsd/LOM
lomStrict.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
- <lom xmlns="
http://ltsc.ieee.org/xsd/LOM">
- <general>
- <identifier>
<catalog>Adobe Captivate Course</catalog>
<entry>tthree</entry>
</identifier>
- <title>
<string language="x-none">tfour</string>
</title>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none" />
</keyword>
</general>
- <lifeCycle>
- <version>
<string language="x-none">1.0</string>
</version>
- <status>
<source>LOMv1.0</source>
<value>final</value>
</status>
</lifeCycle>
- <metaMetadata>
- <identifier>
<catalog>test</catalog>
<entry>test 1000</entry>
</identifier>
<metadataSchema>LOMv1.0</metadataSchema>
<metadataSchema>SCORM_CAM_v1.3</metadataSchema>
</metaMetadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicalLearningTime>
<duration>PT0H0M</duration>
- <description>
<string language="x-none">Average length of time to
experience this
Adobe Captivate Project.</string>
</description>
</typicalLearningTime>
</educational>
- <rights>
- <cost>
<source>LOMv1.0</source>
<value>no</value>
</cost>
- <copyrightAndOtherRestrictions>
<source>LOMv1.0</source>
<value>no</value>
</copyrightAndOtherRestrictions>
</rights>
- <classification>
- <purpose>
<source>LOMv1.0</source>
<value>idea</value>
</purpose>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none">Adobe
Captivate</string>
<string language="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="tthree_ORG">
- <organization identifier="tthree_ORG">
<title>tfour</title>
- <item identifier="tone" isvisible="true"
identifierref="tone_RES">
<title>ttwo</title>
- <imsss:sequencing>
- <imsss:objectives>
- <imsss:primaryObjective objectiveID="PRIMARYOBJ"
satisfiedByMeasure="true">
<imsss:minNormalizedMeasure />
</imsss:primaryObjective>
</imsss:objectives>
</imsss:sequencing>
<adlcp:dataFromLMS>.</adlcp:dataFromLMS>
<adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
</item>
</organization>
</organizations>
- <resources>
- <resource adlcp:scormType="sco" identifier="tone_RES"
type="webcontent" href="cap2 2004.htm">
<file href="cap2 2004.swf" />
<file href="cap2 2004.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>
Please help -
Intune (standalone) - 8.1 laptop as mobile device - password compliance issue
Have Intune trial setup, couple of users created, cleanly reimaged (clean install from media, not a company image) 8.1 x64 laptop with all current Windows Updates. Joins workplace and enables management ok, installed Company Portal from store, then tells
me the device is not in compliance, the password is too short. I only have one local account enabled, it has an 8 character, 4 character set complex password. My Intune account password is a 10 character, 3 character set complex password. My compliance
policy is set to a minimum of 4 characters, 1 character set. Why the heck is it giving me this error, and what password is it referring to?
I had this on initial setup with the laptop, which had previously been on the internal domain, so wiped it and reinstalled the OS fresh, to rule out any lingering domain settings. Retired/deleted the device from Intune, waited an hour, added the newly
installed device. Joined the workplace (PC Settings - Network - Workplace), turned on device management. Installed Company Portal, said all was ok. Rebooted, was asked to reset local password, did so. Opened Company portal, gives
compliance/password error.
My goal is basic management of BYOD 8.1 tablets/laptops as mobile devices, and deployment of Activesync email settings to them (for use with the builtin Mail app). Any and all help appreciated.
Nigel Benfell B.Sc. MCSAHi,
It would be the local password on the WIndows 8.1 computer that it is not seeing as compliant. after you changed it does it make any difference after you initiate a Complaince Check from the COmpany Portal?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
LMS 4.2 Compliance check extended access-list
Hi,
I would like to check of our router has one specific line in an extended access-list. I have tried to use the 'baseline compliance' to get the output, but can't get the syntax right.
I would like to avoid checking on the line number in the access-list, because this is not the same on all the routers.
I have made a new compliance check like this:
'submode': ip access-list extended 'acl-name'
+deny tcp any any eq smtp
But that is not working, Can some one show me the 'right path'?
Thanks
SorenDoesnt have any issues on my Lab 4.2.4. following is the Job Work order :
Name:
Archive Mgmt Job Work Order
Summary:
General Info
JobId: 2704
Owner: admin
Description: test_acl
Schedule Type: Immediate
Job Type: Compliance Check
Baseline Template Name: test_acl
Attachment Option: Disabled
Report Type: NAJob Policies
----------------------------------------------------------------------------------------------E-mail Notification: Not Applicable
Job Based Password: DisabledDevice Details
Device
Commands
Sup_2T_6500
ip access-list standard 21
permit host 10.20.30.40
permit host 40.30.20.10
deny any log
10.104.149.180
ip access-list standard 21
permit host 10.20.30.40
permit host 40.30.20.10
deny any log
Check your template, or export it and share, i will try it on my LMS server. also, check the same complaince job on other devices if you have such issues.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
LMS compliance check on all access lists
Hello, I am trying to create a complaince template in LMS 3.2.1 to check ALL extended access lists for an explicit deny any any rule. I found articles on how to check all interfaces including VLAN's but cannot seem to make it work for access lists. BTW, the access lists are not all named the same on all devices therefore I need to use wildcards for the name.
thanks.I forgot to mention that i am running this against Cisco ASA devices which displays like this:
access-list TEST_ACL extended deny ip any any
I have tried:
access-list [#.*#] extended deny ip any any
but it returns all as compliant becuase it is stopping at the first access-list it finds with the explicit deny ip any any command and not continuing on to check all the other access lists.
Any ideas? -
Oracle Order Management/Shipping - Kewill (Export Complaince) Integration
Hi All,
Any one has done integration between Oracle Order Management/Shipping - Kewill (Export Complaince).
We would like to check customer inforamtion and shipping inforamtion using Kewill (Export Complaince).
This is export Complaince requirement and want to validation inforamtion at order booking time and before shipment.
We don't want to use any third party application.
Thanks
RaviThanks Chris,
I have done Oracle E-Business Suite Order Management/Shipping - Kewill Export Complaince integration using Oracle's Web services.
Now i can do customer check realtime and put order on hold.
Thanks for your response.
--Ravi Triipathi
[email protected]
[email protected] -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
IF-statement in Personas that is checking if control is inactive?
Hi,
I have this simple script in screen personas that is clicking the option: "Attachment list". Everything is working great if there is attachments.
If there are no attachments the option is "inactive" or "greyed out". This will result in a script error.
I thought this was going to be an easy fix by adding IF statement to the the script. But howerver I specify the critera for the IF statement the script will always try to click the Attachment list. The condition will simply always be TRUE.
Am I missing something here or is it not possible at this time to script an IF statement that is checking if the control is inactive or similar?
Best Regards,
Oskar SöderlundThere is another way, but it will get a little tricky.
Outside of the transaction IE03 you can check for the existence of attachments for a piece of equipment by looking in table SRGBTBREL. Field TYPEID_A will be "EQUI" and field INSTID_A will be the equipment number, zero-padded on the left to 18 characters long. Use SE16 to look in the table and you'll get the idea.
You could wrap this test in an RFC-enabled ABAP function and call that from your Personas script button. Use the return value from that RFC to decide if attachments exist or not and how the script should respond. Details for how to write such an RFC and call it from a Personas script are in this blog: Calling RFCs from a Personas script.
Like I said, this isn't straightforward and perhaps Personas scripting should include an active/inactive test in addition to the exists/doesn't exist test. Until then, however, there is a way if you don't mind a bit of ABAP programming. -
Checking null and not null values
Hi!
We have a job schedule table that has a column for each day.
JOB_ID, TIME_ID, MO, TU, WE, TH, FR, SA, SU
1 1 X
1 2 XSince the same job can be on different days and times, we need to check all the instances of
that job.
Sorry for the formatting - the X is an indicator; i.e. Wednesday and Saturday.
How can we solve this?
Thanks!Your requirements are not really clear.
Perhaps this query could help:
-- Your Data:
with yourtable as
select 1 job_id, 1 time_id, null mo, null tu, 'X' we, null th, null fr, null sa, null su from dual union all
select 1 job_id, 2 time_id, null mo, null tu, null we, null th, null fr, null sa, 'X' su from dual
-- Query:
select job_id, time_id, 'mo' day from yourtable where to_char(mo)='X' union all
select job_id, time_id, 'tu' day from yourtable where to_char(tu)='X' union all
select job_id, time_id, 'we' day from yourtable where to_char(we)='X' union all
select job_id, time_id, 'th' day from yourtable where to_char(th)='X' union all
select job_id, time_id, 'fr' day from yourtable where to_char(fr)='X' union all
select job_id, time_id, 'sa' day from yourtable where to_char(sa)='X' union all
select job_id, time_id, 'su' day from yourtable where to_char(su)='X'Edited by: hm on 29.07.2011 01:40
Edited by: hm on 29.07.2011 01:41 -
Check for null and empty - Arraylist
Hello all,
Can anyone tell me the best procedure to check for null and empty for an arraylist in a jsp using JSTL. I'm trying something like this;
<c:if test="${!empty sampleList}">
</c:if>
Help is greatly appreciated.
Thanks,
Greeshma...A null check might not be you best option. If your requirement is you must have both the date and time component supplied in order to populate EventDate, then I would use a Script Functoid that takes data and time as parameters.
In the C# method, first check if either is an empty string, if so return an empty string.
If not, TryParse the data, if successful, return a valid data string for EventDate. If not, error or return empty string, whichever satsifies the requirement. -
Contact form check boxes will not work on a Tablet
Hi there,
I created a website (Desktop) and a mobile version (Phone). I did not create one for a tablet but have relied on the Desktop version if someone views it on a Tablet.
Here's the thing, I created a contact form with checkboxes. It works great on a desktop (because people check the boxes with their mouse), however, it doesn't work on a Tablet, when you try and check the boxes with your finger.
Help!Please share the site URL.
-
my ipad has IOS 5.1.1 version and i know there is newer update for them as when i go to download certain apps it wont let me because it needs IOS 7 but when i have plugged it into itunes it says no update needed?
Hello courtneys100,
Thanks for using Apple Support Communities.
From your post it appears that you are using an earlier iPad, which can only update to iOS 5. Some developers do offer compatible versions of their apps for people running older iOS versions, but ultimately it is up to that developer to make an older version. Check out the article for more information about installing the latest compatible version of an app on your iPad.
Install the latest compatible version of an app on an earlier version of iOS or OS X
Cheers,
Alex H. -
Checkbox item: How to get all values checked?
See http://htmldb.oracle.com/pls/otn/f?p=24317:46
The report query is simply
select
'One' one,
'Two' two,
'Three' three,
'Four' four
from dualThe checkbox item is a named static LOV with STATIC2:ONE,TWO,THREE,FOUR and a Source value of ONE:TWO:THREE:FOUR so that all boxes appear checked when the page is first rendered.
All the 4 columns have a column condition like
instr(':'||:P46_COLS||':',':ONE:') > 0to ensure that column is rendered only if the corresponding checkbox is checked.
The report has Dynamic column headings with the following PL/SQL function body
return 'ONE:TWO:THREE:FOUR';To my (pleasant) surprise, this works very nicely. When column TWO is conditionally not rendered, its corresponding column heading is also skipped with no effort on my part. Nice.
Question:
Instead of "hard-coding" that string ONE:TWO:THREE:FOUR in the 2 places I mentioned above (checkbox item source and report heading), is there a way to access the "all values checked" version of that LOV item so that it will dynamically pick up the latest LOV changes? The way I have done it currently, if I change the named LOV, I need to also change those 2 places where I have hardcoded the values.
Any ideas? ThanksScott:
I thought about that but the LOV has dozens of values, each with a verbose display value and a return value of the column name (upto 30 characters) and the display values are still being "worked on" by the users.
So, the "all columns" string would be a big, unweildy string that would be hard to edit.
It is much easier to edit, resequence and generally work with a Shared Component LOV defined as a Static LOV because you get that nice page (4000:4111) where you can read everything nicely formatted instead of a STATIC2:<big long string>!
Can I have my cake and eat it too?!
Thanks
Maybe you are looking for
-
How do I add a printer to my ipad3.
Do I need a app to add printer to my ipad3 .
-
Issue regarding [Work Flow] Business Object Event Raise in ABAP Program
Hi All, I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program. Actual TDS is as below: If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse,
-
Sharing Internet with others via AirPort Extreme
Hello!! I really hope that someone can help me with this! I have Air Port Extreme in my Mac Pro and I recently set it up so that my girlfriend who has a laptop PC can share my internet connection. My concern is now that anyone in our building can use
-
ABAP proxy in Block step in BPM
Hi Experts, Can ABAP server proxy be used in the block step of BPM? Proxy cannot be generated using Abstract interfaces right? Thanks Suma S
-
IPhoto 6 - Imports by Roll! WHY!!!
So, after being very excited about getting iLife 6 and doing the upgrade, I'm dismayed to find that some nut at Apple thought importing by roll would make things better in some way. Yes we can use iPhoto to edit, but I don't, I use Photoshop and now