Component material to be used for both MTO and MTS scenario

Hello All,
What is the setting required at IMG or at Master data level, in order to use the component for both MTO and MTS scenario.
Detail description of problem:
In the system already MTS process is exist. And now business wants MTO scenario, in order to have sales order specific stock.
So i have made the necessary configuration in requirement class (special stock - E in account assignment field) and the basic requirement is working fine. Meaning when i create prodcution order manually using transaction CO08 with reference to sales order i am able to create it. And no problem in executing GR for the prodcution order. Also noticed that after GR the stock is under the salesorder created.
But the problem is when i try to do the goods issue for the component to the prodcution order, system is expecting sales order specific stock for components too.
But business wants to use components from unrestricted stock as of Make to stock scenario.
Please guide me how to achieve this? This is critical to business so expecing quick recommendations from experts.
Best Regards,
Krish

HI
For your component if you dont set indi/collective requirement indicator as 2 collective reqmt MRP 4 view then only system will not allow you to use r special stock E for sales order
if you want to make all stock avaliable and PR and PO not sales order wise then maintain above indicator as 2 in MRP4 view.
Regards
Anupam Sharma

Similar Messages

Asset used for both repairs and asset under construction

i had doubt for example if we purchase cement bag through po and half of this is used for repairs of old building and remaining half is used for construction of new plant which is to be capitalised how this can be done in sap.
thanks in advance.........................

Another solution would be to use WBS elements.
Have WBS elements for the separate projects.
Code part of the PO to the construction WBS and part to the expense WBS, if you know in advance that half the bag will require a different account assignment.
If you do not know until after acquisition that half the bag was utilized for repair, for example, reclassify that amount from investment measure WBS/AuC to expense cost center. You can do this either before or after Project System settlement into investment measure.
The audit trail is not perfect however, since the acquisition transaction (PO based materials document) still believes the entire cost amount was to be capitalized.
Not a problem if immaterial, but maybe consider going back and correcting MM transactions if material and if policy procedure requires.
Regards

IPad use for both work and personal by leveraging multiple iCloud backups

I have an original iPad 1 that's my personal iPad. Since I got an iPhone 5S over a year ago, I almost never use the iPad as it's so frustratingly slow compared to the 5S, and most of the most recent apps don't work on iOS 5.1.1.
I work for a small consulting firm where a large part of my responsibilities is business development. 2-2.5 years ago, I started occasionally needing an iPad for doing sales presentations of enterprise software. So, I purchased and expensed a then cutting edge 4th Gen iPad. For work purposes, I've always kept this iPad nearly completely empty except for essential software. In the past 6 months, I've needed this iPad less and less for said presentations. I'm down to not even turning it on once a month, and have gone 3 months at a time without touching it. That said, there's always a chance I'll find out that a week from now I'll need to fly somewhere and do a demo using it.
I was really hoping iOS 8 was going to enable multi-user support, but obviously it did not. I'm now pondering the use of iCloud backups as an effective means of multiple user functionality when you don't have to switch user accounts very often.
My thinking is that I can make sure my personal iPad 1 is fully backed up to my personal 20GB iCloud account, and that the work iPad is fully backed up to the work iCloud account. I'd then wipe the work iPad, log in to it using my personal iCloud account and let it restore from there. At that point I'd be using the work iPad for personal use and would completely stop using the iPad 1.
If I found out I needed to demo using the iPad a week later, I would wipe the iPad 4 clean again, after which I'd log in to the work iCloud account, let it restore, and be good to go. Once done the presentation, I could then wipe it, log back in to my personal iCloud and let it restore.
Every time I found myself needing to use the iPad for work purposes I would simply go through the above process.
My questions are:
Are there are any holes in my logic?
Am I risking data loss on either the work or personal account?
I assume iCloud accounts can exist with backups intact even if no device is currently utilizing them?Is there any time limit to this?
Besides the time it takes to wipe and restore the iPad, are there any downsides to the above process?
Is there any reason I cannot wipe my iPad 1 and sell it/donate it?
Thank you in advance.

Ah, MBA makes more sense. Unfortunately, the point of demoing on the iPad is to explicitly show that the enterprise software is iPad compatible and what it looks like on it. Everyone's a skeptic, so I definitely have to use the actual iPad and not emulation software.
As far as overwriting a backup, I would think that the only backups ever visible would be those for the account i'm currently logged in as. I don't see how it's plausible then to overwrite any in the wrong account. Again, these are 100% separate accounts that have nothing at all connecting them. If it were possible, wouldn't the people who sell their iDevices on ebay be complaining about how the recipients deleted their iCloud backups. I'm effectively transferring the device in the same way...just between by own 2 disconnected accounts instead of 2 humans with 2 disconnected accounts.
I don't really view it as a time drain, as when switching accounts I'd just "Reset all settings," and walk away. I'd later log in as the other user, and would walk away again while the iPad just automatically starts loading everything up. I'm not sitting there waiting for it, as this is merely a luxury device that I've never once had an immediate need for. It's just a "nice to have."
Again, this transfer would likely only be happening once every 6 weeks anyway. The majority of the time it would be set up on my personal account.
WiFi is no issue, as I'd only do this while at home on my 50/50 FiOS. Again, I never "need" the iPad on my personal account such that waiting until I return home from a trip would be an issue.

Can a single Sun IDM gateway agent be used for both Dev and QA machine

We have three different machines - one for IDM QA, one for IDM DEV and one remote machine where Sun IDM gateway is installed.
If we run the Dev and QA gateway on the same server, we won't be able to test any updates in an isolated environment before rolling out to QA..right?
Is it possible to have a Sun IDM gateway agent instance on the same remote machine? or do we have to install gateway separately on DEV and QA? Any ideas??

Hello Manidhar,
You have three different machines -
QA,DEV and IDM Remote gateway.
If we run the Dev and QA gateway on the same server,
we won't be able to test any updates in an isolated
environment before rolling out to QA..right?
you are right. you won't have an isolated environment for testing. it creates interdependancy between DEV/QA environments.
on the other hand, if DEV or QA server goes down, you end up loosing both the enviroments Gateway. it creates a SPF ( Single Point Failure) and it's not a best practice to do so from archicture point of view if you indend to maintain HA ( High Availability) 99.99% up-time.
Is it possible to have a Sun IDM gateway agent
instance on the same remote machine for DEV/QA?
this also creates a SPF situation.
or do we have to
install gateway separately on DEV and QA?
Since you have 3 different machines for 2 +1 Environments,
it is best practice to have
1. Seperate Gateway(s) for each Environment
1. For Dev, 1 For QA
so you have two isolated enviroments for testing, but also gives you the flexibility of keeping the QA Environment closer to Production possible without disturbing Dev
let me know if you have any questions.
Thank you,
Sam
We have three different machines - one for IDM QA,
one for IDM DEV and one remote machine where Sun IDM
gateway is installed.
If we run the Dev and QA gateway on the same server,
we won't be able to test any updates in an isolated
environment before rolling out to QA..right?
Is it possible to have a Sun IDM gateway agent
instance on the same remote machine? or do we have to
install gateway separately on DEV and QA? Any
ideas??

How can i format an external drive to be used for both windows and mac

i recently bought a macbook pro and used bootcamo so as to be able to run win7 and mac. I now wish to have an external usb drive so as to backup and tranfer files between the two os's. How can I do this?

Firstly,
There is a forum for MacBook Pro - not this. And for Boot Camp.
You can:
add Paragon HFS driver to Windows which works
add Paragon NTFS for Mac OS X
USB is of course slow and while people use it for backups and TimeMachine, that is one place where FW800, eSATA or USB3 would be better served.

External hard drive filesystem to use for both pc and mac

hi everyone,
i've got a 120 gig portable WD passport harddrive that i'm planning on using to move files between my pc and macbook.
it is recognized fine on both and I am able to copy files to my macbook but cannot write files to it, i'm assuming it has to do with the file system it's using (not sure what it is off hand bought it used and preformated)
any suggestions on how to get it working on both platforms?

Important Note: Reformatting a HD will overwrite all existing files.
Before attempting Reformat,Be sure to Back-up important files to another HD,iPod,CD or DVD.
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.9)

External hard drive for both windows and mac

hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
thanks in advance for any insight.

2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
thanks.

Material Issue for both MTO & MTS

Dear Guru's
I have to do REM Backflush for a MTO scenario.
The corresponding raw material are available in stock which was not purchased over a period of time.
When I try to do post with correction the system is not allowing me to do the posting, the system is giving error as sales order item is not available.
Can anyone help me consumming the raw material available in the stock .
Is there any settings to be done to consume the material which is available in the stock for bothe MTO & MTS.
Kindly do the needful.
Helping hands will be appreciated with good points.
Thanks & Regards,
Arul.

Hi Arul
Please check the below in your DEV server.
If you put the Individual/coll indicator to 2 in MRP 4 view in material master the raw materials can be taken from unrestricted use stock while back flushing.
Or
IN MB1B you can use mvmt type 412E to convert unrestricted use stock to sales order stock.
SO u can do the backflushing after the conversion.
Cheers
JOJI

I have one apple ID for my MAC and another used for both my iPhone and IPad. Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop. Thanks

Hi,
I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop.
Thanks

It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
For info - Using your Apple ID for Apple services
For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
regards
CCC

Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>

Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

Component material to be used for both MTO and MTS scenario

Similar Messages

Maybe you are looking for