Component Version "SAP ERP 6.0" instead of "EHP 4 for SAP ERP 6.0 /7.0"
Hi All,
We went to ERP Enhancement Package 4 in ours SAP Systems.
We performed the upgrade (with the SAPehpi tool) in DEV and TEST, the weird part is that in DEV the System Data - Component Version shows "SAP ECC 6.0" and in TEST shows "EHP 4 for SAP ERP 6.0 /7.0".
The 2 systems have the same SP level.
Any idea ?
Thanks,
Juan.
Hi,
After EHP4 upgrade it should show ECC 6.0 only.
check below thread:
/thread/1432042 [original link is broken]
Thanks
Sunny
Similar Messages
-
Hi all,
I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
SAP ECC 6.0 7.00 - 64bit
SAP ECC 6.4 7.01 - 64bit
SAP BI 7.1 7.01 - 64bi
I was wondering whether there are compatibility issues with any of the above mentioned versions.
Your feedback is appreciated.
Regards,Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
[http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html] -
Hi All, We would like to use sap mobility in our server. So do we need to upgrade EHP (Currently we use ehp 2 )or whether it will work in any ehp. Thanks, Sam
[LOCKED BY MODERATOR. SEARCH FIRST AND IF NECESSARY ASK SPECIFIC QUESTIONS]Hi Rahul,
Suppose I am using EP 7.0 , and within that server i want to upgrade only WD java server as suggeted by you so that i can use new functionallity of WD java, so is it possible that only WD java server/framework I can upgrade to 7.1 in EP 7.0, and rest other components of EP 7.0 remains same. Is this is possible ? if yes how ? any documents on this to upgrade particular component in 7.0 and keeping rest of the components of 7.0 unchanged ?
Do i have to apply any EHP for this, is that a mandatory step or without applying any EHP, Still i can upgrade any particular component of 7.0 to 7.1 ?
Ans - Yes we can only apply the most current patch for EP 7.0.
Most current patch for WebDynpro EP 7.00 version -> EPWDC22_0-10003557.SCA
We can deploy this component using SDM tool or JSPM tool. Details of document are :-
SDM Doc ref - For detailed information about the command line interface of the SDM, see the SDM installation directory (under <SDM-Install-Dir>/program/doc/SDMCommandLineDoc630_en_final.pdf).
JSPM Doc ref - "http://help.sap.com/nw70 --> Knowledge Center for SAP NetWeaver 7.0 (2004s) -> Functional View [open] -> SAP NetWeaver by Key Capability -> Solution Life-Cycle Management by Key Capability -> Software Life-Cycle Management -> Software Maintenance -> Java Support Package Manager".
To answer your question, I believe then we need not upgrade the whole version to EHP1 (i.e. 7.01 versions).
Do let me know in case of any further queries.
Thank you.
Regards,
Manomeet Mohapatra
<removed_by_moderator>
DO NOT ask for points
Read the "Rules of Engagement"
Edited by: Juan Reyes on Aug 30, 2010 9:23 AM -
(SBOP EDGE INTEG. FOR SAP SOL ) vs. ( SBOP INTGR. FOR SAP)
We have Edge Series Server Licence and I am not able to figure out the difference between two above components available for download. Any insights would be truly helpful.Thanks,Mahesh
Question 1-)
But i can`t find BOBJ Live Office XI 3.1 CD !! Where`s it ?
A: you can check with SAP, I hope you have purchased it.
Question 2-)
On the server side I just have to install the following CDs right ?
SBOP EDGE BI 3.1 SP3 STANDARD PACKAGE 51040529
SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) 51038935
Or do i need to install SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) 51038935
on Client side ?
A: SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS has to be installed on the server. For client side, do custom install and select only client components.
Question 3-)
In CD SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B) there is some folder called Transports
I need to import some request to my ERP system.
But i have a doubt about files 92 to 95.
They said "The following files must be used on an SAP BW system: "
They are talking about my ERP system right ?
A: Yes, the transports has to be imported to SAP system. What is the ERP you are using. -
How to use SAP Business One as a source system for SAP BW 7.1
Dear Experts,
We have SAP Business One system as a transactional system. We need to connect the same to SAP BW so that we can deliever reports for this system in SAP BW. I want to know how the integration between these two systems work. Are there standard datasources created in SAP Business One which can be consumed directly in SAP BW like any other ABAP systems, or SAP Business needs to be connected using some ETL tool like UDConnect or Informatica?
Regards,
Aarati YadavHi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
<i><b>Raja Sekhar</b></i> -
I may like to "zap" SAP, but I also like to "clap for SAP" when appropriate
I just sent this note to Patricia Smith in SAP Consulting concerning one of her staff - an SAP consultant who is referred to below as "xxxxx".
<i>Hi Patricia
xxxxx happens to be here on-site at yyyyy in zzzzz helping with Solution Manager
and a totally unrelated problem arose involving an emergency project for our PM (Plant Maintenance group.)
To satisfy yyyyy HQ staff from wwwww we have to be able to load graphic attachments created for IW22 notifications into SAP picture controls, so they appear on a custom IW22 tab rather than just pop in MS Picture Manager (as they do via the SAP-delivered GOS toolbox.)
I got the right code at SDN (from Uwe Schieferstein) to find the URL of an attachment and pass it to the load method of cl_gui_picture, but it wasnt working on our system.
xxxxx took some time to investigate and his investigation pointed us in exactly the right direction our PC and graphic attachments are now being stored internally in the SAP table SOFFCONT1, and to do what is necessary, we have to create an HTTP content server, point the SOFFHTTP storage category to this server, and then point the SOFFPHIO document class to SOFFHTTP rather than SOFFDB.
Without xxxxx's intervention, I doubt we would have been so quickly put on the right track to solve our problem and allow us to use the get_with_url method of cl_bds_document_set the way we need to use it.
xxxxx also has found a link that will tell us how to transfer documents from SOFFCONT1 to the new content server, and this is equally important, since we were wondering what we would have to do about all the PM notification attachments now stored internally.
So we really appreciate xxxxxs help in an area he really wasnt here to help us with. It not only reflects well on him, but also on SAP Consulting.
Sincerely,
David Halitsky</i>Wow thats like so amazing.
Why use zzzzz? it sounds like everyone is sleeping on the project.
I have seen your other posts trying to resolve this issue, looks like you have been from aaaaa to bbbbb to ccccc to ddddd to eeeee to fffff of zzzzz (oops!) but finally got it solved, congrats. -
CRM Upgrade from SAP CRM ABAP 6.0 to EHP3 FOR SAP CRM 7.0
Hi,
While downtime I got the following error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR740XPRA90000035.CRE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP109 version and release : "380.09.41" "740"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000035"
4 EPU111 on the application server: "fmgcre"
2 EPU122XPost-import method "BEFB_AFTER_IMP" started for "BEFT" "T", date and time: "20140612120701"
1AETR012XProgram canceled (job "RDDEXECL", number "12070100")
1AEPU320 See job log"RDDEXECL""12070100""CRE"
1 ETP111 exit code : "12"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR740XPRA90000036.CRE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP109 version and release : "380.09.41" "740"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000036"
4 EPU111 on the application server: "fmgcre"
2 EPU122XPost-import method "BEFB_AFTER_IMP_ENH" started for "BEFE" "T", date and time: "20140612120701"
1AETR012XProgram canceled (job "RDDEXECL", number "12070101")
1AEPU320 See job log"RDDEXECL""12070101""CRE"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
In the TR: SM37 the job RDDEXECL is aborted, the result is the short dump OBJECTS_OBJREF_NOT_ASSIGNED_NO
I am currently using SUM ver 1.0 SP9_8
Has anyone had this error? about every helpful tip would be very grateful!
Thanks
GeorgHi,
The problem we could solve, we modified the function block BEFB_AFTER_IMP.
Thanks
Georg -
Configuring SAP R/3 system as data source for SAP BW3.5 system
HI All,
Please help me in getting some document for integrating SAP R/3 4.7 with SAP BW3.5 as data source system.
Thanks in advance.
Regards,
Nalla.Hi,
I have got the link which has solution for my question from old questions in this Forum.
http://help.sap.com/saphelp_nw04/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
So stopping this thread.
Regards,
Nalla. -
New to sap - need help in configure backup strategy for SAP XI server.
hi gurus
being a netweaver guy, recently i have been given the responsibility of few basis activities.like database backup.
can any one tell me clear procedure to take both daily online and weekend full offline backup of oracle in to disk first and then to tape. i have seen in the internet material few discussing about brbackup and few about sap DB13. i am totally confused which one to use, and which is good. please help
akhilHi,
welcome on board as SAP Netweaver guy,
don't be confused both DB13 and BRtools are the same both of them will call brbackup.
to configure the brtools you have to change in your brtools profiles located at %ORACLE_HOME%/dbs
please before changing any thing take backup from that folder.
- to take the backup to disk then to tape you will need extra backup software, because using the SAP slandered tools you have to select either Disk or Tape.
Thanks
Sherif -
Can not view a Software Component Version in Enterprise Services Repository
Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--ervaHi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael -
New Features of BOE 4.0 integration kit for SAP
Dear colleagues,
I am looking for a presentation that shows the new features of SAP BOE XI 4.0 integration kit for SAP (BW), compared to XI 3.1. I have for example read that regarding WebI it will be possible to connect directly to BEx queries without universe. It is correct ?
I look to several documents on the market place, but there is no clear document about these new features...
Thanks for your help.
Regards,
Thibaudno "integration kit" in version 4 - its all nicely embedded into the core product.
you are correct - webi can direct connect (using BICS) and also can source from an Analysis View (which is an output of either Analysis Services OLAP edition or the Microsoft edition (excel plugin). you also get a new universe layer (.UNX) which gives you a much better view of your underlying BEx queries/Cubes and allows you to combine with aother data sources.
lots more info in the product manuals to v4 which are available at...
http://help.sap.com/businessobject/product_guides/
(just change the product drop down to "SAP BusinessObjects Business Intelligence Platform"
some specific info on SAP BW connectivity is here...
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_sap_olap_univ_en.pdf
cheers,
Jeremy -
Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706
Hi all,
by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
This error is descriped and solved in Note 1484086
(https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to find these named Fix Pack in the download area of the Marketplace.
An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
therefore I tried several downloads beginning with:
Crystal Reports 2008 Fix Pack 3.1 - Click Once
Crystal Reports 2008 Fix Pack 3.1 - Redist Install
Crystal Reports 2008 SP3 Fix Pack 3.1
there are no transportfiles in any of these packages.
If any from you have some idea where to find the right transport files, please let me know.
Regards
MarcoHi Marco,
you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
in the left select "Search for Software Downloads" then in "Search Term" input:
BOBJINTGRSAP03P
You'll retrieve all available versions of IK SP3 with related fixpacks.
Regards.
Roberto. -
Solaris Cluter 3.2 for SAP
Hello All,
My SAP production environment needs to be running under Solaris Cluster 3.2. I am thinking of T5440 servers - 2 in number and StorageTek 6140. The agents available for SAP on Solaris Cluster 3.2 are:
Sun Cluster HA for SAP (failover or scalable).
Sun Cluster HA for SAP LiveCache (failover).
Sun Cluster HA for SAP Web Application Server (failover or scalable).
Sun Cluster HA for SAP DB (failover)
The ERP 6.0, EP 7.0, BI7.0 and Oracle HA DB needs to failover from one node to another.
My question is: What agents do I need to purchase for failing over the above the applications beside Sun Cluster HA for Oracle.
SAP vendor is asking me to provide three logical host names. The idea of Solaris 10 zones came into my mind.
Zones can be implemented with Sun Cluster 3.2 software in the global zone. That is, Sun Cluster 3.2 with zones enabled will be treated like physical nodes to be part of Sun Cluster Resource Groups. I feel it is best for those applications which are supported with containers and have a Sun Cluster agent but don't have the requirement of the zone itself failing over in case of a failure.
Any suggestions will be helpful.
Best Regards,
BruceYou might be interested to read the following Solaris Cluster for SAP Configuration Guide:
[http://www.sun.com/third-party/global/sap/collateral/SAP-Cluster-Config-final.pdf|http://www.sun.com/third-party/global/sap/collateral/SAP-Cluster-Config-final.pdf]
Regards
Thorsten -
Error with trial Installation of the BusinessObject Integration Kit for SAP
Hi
I am using the trial version of Installation of the BusinessObjects Integration Kit for SAP
while doing the installing it gives me the screen of
BW Publisher Parameter in which I need to fill the
Program ID
gateway host
gateway service
Can anyone please let me know where can I get the program id and gateway host and service
Regards
JMHi John,
those depend on you landscape. Take a look here:
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
and you can also look into the Installation Guide for the SAP Integration Kit
Ingo -
Required Software and Hard ware Confugataiton for SAP BPC /SAP NetWeaver
Hello Experts
I want to know what r the Reqired Hard and software's r required to start a SAP BPC NetWeaver 7.0Virsion
Can any one know what r the hardware r requird what software's i have to install
Expert's Pls Help me with u r Valueble Help
Thanks In Advance
Regards
Narsi
SAP BPC ConsultantHi,
Check this instalation guide for Sap BPC NW 7.0 version.
[Installation Guide|https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000085368&_SCENARIO=01100035870000000112&_OBJECT=011000358700001123512008E]
Note: need sap market place password.
thnks..
Edited by: Sakthi Jaganathan on May 21, 2009 6:59 PM
Maybe you are looking for
-
Extremely Long Render Times!! Please help!!
Hello, Let me start off by saying I am new to premier, forums, and video editing for the most part. My content comes from (2) GoPro Hero 4 cameras set at 4k and a Sony FDR-AX100, also set at 4k. MY PROBLEM (well hopefully the one you can help me with
-
PLease, I am trying to install I DVD but it says that an eligible iDVD application was not found in the location /Applications. Somebody can help me?
-
Master/Details Form -- Relation Property
Is it possible to set the relation join condition property for a master/detail form programmatically. If so, what is the syntax? Thanks, Paul Howard [email protected]
-
ISE Addon for Checkout or Checkins via TFS 2013
Hi I am coordination the development of some PowerShell scripts to work against our SharePoint Farm. Now as there is more that just me developing these scripts, I think we need to start doing regular checkin and checkouts in our TFS 2013. Anyway, I
-
Org.xml.sax.SAXParseException: White spaces are required between publicId
Hi, Im migrating an application from weblogic to tomcat 5.5.23 with java 1.5. application involved PDF generation using xalan.jar for transformation. tht pdf generation part is not working in tomcat. Im getting a "org.xml.sax.SAXParseException: White