Compressor 2.0 cannot submit batch problem (incomplete or empty batch)

Hi
Trying to use compressor for the first time on my laptop. Having finally got compressor to open. I select the fcp sequence to compress select the settings i want and try to submit. Then i get the following message "cannot submit batch, empty or incomplete batch". The sequence shows up ok on the preview window and plays so i am assuming its imported ok?
any advice would be greatly appreciated. This is a 1 hour 45 minute dvd. Tried to use export quicktime mpeg2 from my old mac and using the laptop as a firewire drive, hours later the dvd burned pressed play but no sound!!!! so trying compressor on the laptop hence the request. Dont have the mpeg2 quicktime export on this laptop but do on my old imac with fcp 4 but using fcp5.0 to create project.I am still playing with it not quite up to speed as it has been months since i used any of these apps.
powerbook G4 17 inch 1.5GHZ Mac OS X (10.4.5) new hard drive fitted ! shouldnt have died so soon not a happy bunny!!

Hey Sean, i have seen this before and you will kick yourself when i tell you the answer (i know i did).
even though you import a sequence into Compressor's batch list, to set an actual parameter to encode, you have to physically click on the original file IN Compressor's batch window.
so you import file.mov into compressor
you CLICK on file.mov
THEN you select whatever parameter you want to use
if you want to add more than one setting, you CLICK on file.mov AGAIN and set your next setting
FINALLY you click on submit
Mikey M.

Similar Messages

Compressor 2.3.1 Cannot submit batch error message What is causing this?

Just installed FCP 5 with DVD Studio pro 4 and Compressor 2 and tried to do a batch compression exported from FCP, I selected the compression I wanted and chose my destination and clicked submit and I get this error message "Cannot submit batch Unable to connect to background process" I did try to Reset Background Processing and it did not make a difference, any suggestions would be appreciated.

The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

Have leopard but still get Cannot Submit Batche error message in Compressor

i get the "cannot submit batch unable to connect to background process" error message. Some posts attribute this to a Tiger anomaly but it has happened to me after i went to 10.4.10--though i had not used my DVDSP2 in several months.
Any suggestions appreciated

Sounds like your compressor preferences are trashed. You can try getting your old compressor preferences before you installed leopard.
leopard keeps some of the old file from you previous system.
I forget what the name of the folder is but its something like previous versions in your main directory. From the previous system folder navigate to your old
compressor settings. users>yourname>library>application support>compressor.
copy those files from you previous system folder and move them the new compressor files location that can be found under you username NOT IN THE PREVIOUS SYSTEM FOLDER.
You can also try moving your present compressor settings to the trash (DO NOT EMPTY)and rebooting then launching compressor. You might get prompted to reinstall compressor from disk or website file.
There also used to be a way to download just compressor from apples website.
If all that doesn't work. DO A CLEAN INSTALL final cut likes that better then upgrades.
Back up and do a clean build.
Back up old content to other HD then OS is on.
Reformat OS HD
Reinstall OS
Reinstall FCP (long time).
FCP will be happier that way.
HOPE IT HELPS.

Cannot submit batch... Error message! please Help

Hi, I'm trying to encode a short clip using Compressor, and each time I hit the Submit button I get this message : "Cannot Submit Batch - Unable to connect to background process" why? can anybody help on this please?

I don't really use compressor, but you might try posting in the Compresser forum to get more answers.
http://discussions.apple.com/forum.jspa?forumID=999

Cannot submit batch error!

When I go to submit a batch for compression, I get an error that says:
Cannot submit batch
Unable to connect to background process.
Is there a way to fix this?
I use Compressor 2.

It says when I run it:
Resetting Qmaster...
Checking file permissions...
/Applications/Apple Qadministrator.app does not exist. You are advised to reinstall Compressor / Qmaster.
/Applications/Apple Qmaster.app does not exist. You are advised to reinstall Compressor / Qmaster.
Removing temporary spool data...
Trashing preferences...
Trying to start Qmaster...
Repair complete.
Well, I cannot unistall the program at the moment because actually, I got it from my brother who got it from a friend. What else can I do?

Cannot submit CD titles to CDDB: an error occurred in the query subsystem

Ever since I updated to Mountain Lion, I cannot submit CD titles to CDDB/ Gracenote through iTunes. I get the error:
an error occurred in the query subsystem
This is on two different computers, both on OS X 10.8.4. One computer is running iTunes 11.0.4, the other is sunning iTunes 10.7. Same error in both cases.
Help?

I'd make an educated guess, based on the error message, that the problem lies in the PHP/MySQL on the Gracenote site and it ISN'T an iTunes or Apple problem. What you're seeing is similar to a 503 error in a web browser. That's ALWAYS on the server end. Gracenote may work it out or not, but I doubt it's anything you (on your end) or Apple can fix.

Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

I ran into your post while having a similar issue. I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
and open in browser) the error doesn't occur. Hope that helps some....

Cannot add row without complete selection of batch/serial numbers while creating Goods receipt purchase order

Error:Cannot add row without complete selection of batch/serial numbers
       Dim oPDN As SAPbobsCOM.Documents
       oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                     Dim serno As String = "SH-A1,SH-A2"
                    Dim sernoval As String() = serno.Split(",")
                    Dim mnfser As String = "SH-B1,SH-B2"
                    Dim mnfserval As String() = mnfser.Split(",")
                    For k = 0 To sernoval.Length - 1
                        oPDN.Lines.SerialNumbers.InternalSerialNumber = sernoval(k).Trim
                        oPDN.Lines.SerialNumbers.ManufacturerSerialNumber = mnfserval(k).Trim
                        oPDN.Lines.SerialNumbers.Quantity = linedetails(iRowNo).Quantity
                        oPDN.Lines.SerialNumbers.SetCurrentLine(k)
                        oPDN.Lines.SerialNumbers.Add()
                    Next
                oPDN.CardCode = "C232323"
                oPDN.Lines.ItemCode = "A00004"
                'oGR.Lines.LineNum = 0
                oPDN.Lines.BaseLine = 1
                oPDN.Lines.BaseEntry = 202
                'oGR.Lines.BaseRef = 203
                oPDN.Lines.BaseType = 20
                oPDN.Lines.Quantity = 1
                oPDN.Lines.UnitPrice = 2
                oPDN.Lines.WarehouseCode = '01'
             oPDN.Lines.Add()
             lRetCode = oPDN.Add

Hi Vasanth,
Invert the SetCurrentLine () and Add() at the end of the SSSerialNUmbers loop.
Regards,
Eric

Can you please help me resolve this issue on Batch Management Completion. "Cannot Add row without complete selection of batch number." Message 29-77

'Another user or another operation modified data, to continue open the window again ' Inventory Transaction Log' (OITL)(ODBC-2039) (Message 131-183). If I click again on add I get the following message : 'Cannot add row without complete selection of Batch / Serial Nos. [Message-29-77]
Path:
Inventory -> Item Management -> Batches -> Batch Management - Complete form.
Before this I use Return Components on Receipts from Production as I am mistakenly issued it more than what was needed.
Were anyone be able to explain why it worked for certain items and not for others? I have successfully done “return components with some batches"

Hi Nagarajan,
I'm one of colleague of caterine, we only accessing the batch management-complete window, no other window is open, still the error occurs; see image below
Before that error occurs(in image); first error we encounter was batch number is already exist, then upon click add another person modified the window; but we tried to restore the db then try to add the batch number in different transaction like SI 1658(Goods Issue), and it is okay.. but on the SI 50003 which is Receipt from production we can't add it.
Hope you can help us.
Regards,
Lean

Cannot submit datapipe for urb 0, error -28: not enough bandwidth

cannot submit datapipe for urb 0, error -28: not enough bandwidth
What is causing this?
I read something about disabling the following:
:[ ] Enforce USB bandwidth allocation (EXPERIMENTAL)
:[ ] Dynamic USB minor allocation (EXPERIMENTAL)
But I feel that recompiling the kernel and changing in there is a bit out of my league but if it's the only solution there is I guess I have no choice.
Anyways, I was hoping someone here maybe has seen this issue and know how to solve it.

I don't think so. I remember for certain patchsets on Solaris (Sparc), to be able to apply the patchset - I had to download an interim patch to update the OUI version. It was necessary to apply that particular patchset. And I got that from Metalink, it was documented in the patchset help file. I guess, you should try the Metalink. The OUI version 10.1.0.4 I was referring to actually comes with iAS 10g R2. For the database version, 10g R2 - OUI version is 10.2.
Message was edited by:
zaferaktan

Cannot add row without complete selection of batch / serial numbers SBO 8.8

Hi
I have written some code to import a goods receipt po document in SAP 8.8
When the item is a batch number I get the message 'Cannot add row without complete selection of batch / serial numbers'
This is my code -
                    doc.Lines.SerialNumbers.SetCurrentLine(0)
                    doc.Lines.SerialNumbers.InternalSerialNumber = batchno
                    doc.Lines.SerialNumbers.ExpiryDate = CDate(bbdate2)
                    doc.Lines.SerialNumbers.ReceptionDate = CDate(Now.Date)
Can anyone see what is wrong please ?
Many thanks
Regards Andy

Hello
You would like to import items with batches or items with serials?
This code is importing items with serials.
Hereby an expample for each cases
'bacthes
        oDoc.Lines.BatchNumbers.SetCurrentLine(0)
        oDoc.Lines.BatchNumbers.BatchNumber = "1"
        oDoc.Lines.BatchNumbers.Quantity = 1
        oDoc.Lines.BatchNumbers.Add()
        oDoc.Lines.BatchNumbers.SetCurrentLine(1)
        oDoc.Lines.BatchNumbers.BatchNumber = "2"
        oDoc.Lines.BatchNumbers.Quantity = 1
        oDoc.Lines.BatchNumbers.Add()
        ' here you should apply condition: sum of batch qty = oDoc.Lines.Quantity -this completes the selection
        oDoc.Lines.Add()
'serials
        oDoc.Lines.SerialNumbers.SetCurrentLine(0)
        ' Use the correct line for selection of serial numbers:
        ' I have the settings "None" -> Systemserialnumber will be used
        ' query: SELECT T0.[SriUniqFld] FROM OADM T0
        oDoc.Lines.SerialNumbers.SystemSerialNumber = "1"
        'oDoc.Lines.SerialNumbers.ManufacturerSerialNumber = "1"
        'oDoc.Lines.SerialNumbers.InternalSerialNumber = "1"
        oDoc.Lines.SerialNumbers.Add()
        oDoc.Lines.SerialNumbers.SetCurrentLine(0)
        oDoc.Lines.SerialNumbers.SystemSerialNumber = "2"
        'oDoc.Lines.SerialNumbers.ManufacturerSerialNumber = "2"
        'oDoc.Lines.SerialNumbers.InternalSerialNumber = "2"
        oDoc.Lines.SerialNumbers.Add()
        ' here you should apply condition: count of serialnumer lines = oDoc.Lines.Quantity
Regards
János

Infopath cannot submit the form ?

I have infopath form in Infopath 2010, i have publish by choosing option Publish form to a sharepoint Library. It has been publish well.
I have made data connection for submit this form as a document file, it also got succed.
When i filling data and click to Submit option then i am getting following error message-->
InfoPath cannot submit the form.
An error occurred while the form was being submitted.
InfoPath cannot submit to the following location: http://testdev.gcgation.com/apps/LossPreventionIncidents/LossPreventionIncidents/Loss
Prevention
Incident-20121101203.xml
The form template has insufficient security privileges.
Access is denied.
What i have missed , is any fruitfull suggestion on the same?

Hello,
Is your InfoPath form is fully trusted. Please check once. You can set this to true from "Security and Trust" option.
Thanks! BR, Prasham http://prashamsabadra.blogspot.in/

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

Bridge photoshop batch problem

Hi there,
After upgrading to Photoshop CS4 from CS3 (new install), I am having a problem with running Photoshop batch from bridge.
I have actions that work fine when run from Photoshop but fail when run from bridge.
I don't seem to be able to run any Photoshop actions from bridge without a failure.
The error messages include:
"JavaScript code was missing"
"The command 'Pixel Genius PhotoKit Capture Sharpener Expert' is not currently available"
As well as other seemingly random "the command .... is not currently available".
I am running Vista 64 bit.
If anyone has any ideas - I would appreciate them.
Thanks,
Richard.

Hi there again,
An update to this problem.
The problem appears to be with Bridge-Photoshop communication.
I select images in bridge, choose Tools->Photoshop->Batch. Photoshop opens and I select the Action to run and click OK. At this point, if Photoshop had no image already loaded then the Action fails because there is no image, ie. the selected images from Bridge are not opened in Photoshop. The error messages are consistent with having no image loaded to run the various action tasks on.
If Photoshop already had an image loaded, then it proceeds to run the Action, once for the number of images I first selected in Bridge, but on the image that was already loaded - not on the images selected in Bridge.
I have deinstalled and reinstalled Photoshop and all its updates with no change. Any ideas at all would be appreciated.
BTW Image Processor works ok when invoked from Bridge.
Tks,
Richard.

MBCFC004 problem with updation of batch characteristics

hi,
I am facing a problem in updattion of batch charactristics using exit MBCFC004.. EXIT_SAPMM07M_004
in user exit interface EXIT_SAPMM07M_004 there is one table parameter 'Values' which is used to update batch characteristics.
i am able to add characteristics values but not able to delete or change batch characteristics.
please help

Class type 023 is classified as a type which allows multiple object types.
For this class you may have to use 'BAPI_OBJCL_CHANGE_KEY' (check out its code).
The key relationships for such class types are maintained in table INOB and can be fetched using the BAPI 'BAPI_OBJCL_GET_KEY_OF_OBJECT' .
Hope this helps.
Thanks and Regards,
Srihari

Compressor 2.0 cannot submit batch problem (incomplete or empty batch)

Similar Messages

Maybe you are looking for