Compressor 2.3.1 Cannot submit batch error message What is causing this?

Just installed FCP 5 with DVD Studio pro 4 and Compressor 2 and tried to do a batch compression exported from FCP, I selected the compression I wanted and chose my destination and clicked submit and I get this error message "Cannot submit batch Unable to connect to background process" I did try to Reset Background Processing and it did not make a difference, any suggestions would be appreciated.

The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

Similar Messages

Have leopard but still get Cannot Submit Batche error message in Compressor

i get the "cannot submit batch unable to connect to background process" error message. Some posts attribute this to a Tiger anomaly but it has happened to me after i went to 10.4.10--though i had not used my DVDSP2 in several months.
Any suggestions appreciated

Sounds like your compressor preferences are trashed. You can try getting your old compressor preferences before you installed leopard.
leopard keeps some of the old file from you previous system.
I forget what the name of the folder is but its something like previous versions in your main directory. From the previous system folder navigate to your old
compressor settings. users>yourname>library>application support>compressor.
copy those files from you previous system folder and move them the new compressor files location that can be found under you username NOT IN THE PREVIOUS SYSTEM FOLDER.
You can also try moving your present compressor settings to the trash (DO NOT EMPTY)and rebooting then launching compressor. You might get prompted to reinstall compressor from disk or website file.
There also used to be a way to download just compressor from apples website.
If all that doesn't work. DO A CLEAN INSTALL final cut likes that better then upgrades.
Back up and do a clean build.
Back up old content to other HD then OS is on.
Reformat OS HD
Reinstall OS
Reinstall FCP (long time).
FCP will be happier that way.
HOPE IT HELPS.

Cannot Submit Batch error message

This comes up when trying to compress anything to anything it also says unable to connect to background process
any ideas

Hi:
Do a Search in this forum for "unable to connect to background process" and you'll find a lot of threads. probably you can find your solution !
Hope that helps !
Alberto

Cannot submit batch error!

When I go to submit a batch for compression, I get an error that says:
Cannot submit batch
Unable to connect to background process.
Is there a way to fix this?
I use Compressor 2.

It says when I run it:
Resetting Qmaster...
Checking file permissions...
/Applications/Apple Qadministrator.app does not exist. You are advised to reinstall Compressor / Qmaster.
/Applications/Apple Qmaster.app does not exist. You are advised to reinstall Compressor / Qmaster.
Removing temporary spool data...
Trashing preferences...
Trying to start Qmaster...
Repair complete.
Well, I cannot unistall the program at the moment because actually, I got it from my brother who got it from a friend. What else can I do?

Compressor will not submit batch - error message

The error message I am getting every time I try to go from Final Cut to Compressor is as follows: "You need to restart your computer or verify compressor was installed correctly" and it does this every time you hit submit on a batch, i know the program was installed right so that cant be the problem, any ideas out there on how to remedy this without completely re-installing final cut studio?

i know the program was installed right so that cant be the problem
How do you know that?
Have you tried this? http://www.digitalrebellion.com/compressorrepair/
-DH

HT1386 I try syncing my ipod to itunes, but its says it cant because there is some kind of error. What would cause this to occur?

I try syncing my ipod touch to itunes, but it says it cant because there is some error. What would make that occur?

What is the exact wording of this error message? Knowing this can help us narrow down what sort of troubleshooting suggestions and solutions to offer.
B-rock

Cannot submit batch... Error message! please Help

Hi, I'm trying to encode a short clip using Compressor, and each time I hit the Submit button I get this message : "Cannot Submit Batch - Unable to connect to background process" why? can anybody help on this please?

I don't really use compressor, but you might try posting in the Compresser forum to get more answers.
http://discussions.apple.com/forum.jspa?forumID=999

Compressor 2.0 cannot submit batch problem (incomplete or empty batch)

Hi
Trying to use compressor for the first time on my laptop. Having finally got compressor to open. I select the fcp sequence to compress select the settings i want and try to submit. Then i get the following message "cannot submit batch, empty or incomplete batch". The sequence shows up ok on the preview window and plays so i am assuming its imported ok?
any advice would be greatly appreciated. This is a 1 hour 45 minute dvd. Tried to use export quicktime mpeg2 from my old mac and using the laptop as a firewire drive, hours later the dvd burned pressed play but no sound!!!! so trying compressor on the laptop hence the request. Dont have the mpeg2 quicktime export on this laptop but do on my old imac with fcp 4 but using fcp5.0 to create project.I am still playing with it not quite up to speed as it has been months since i used any of these apps.
powerbook G4 17 inch 1.5GHZ Mac OS X (10.4.5) new hard drive fitted ! shouldnt have died so soon not a happy bunny!!

Hey Sean, i have seen this before and you will kick yourself when i tell you the answer (i know i did).
even though you import a sequence into Compressor's batch list, to set an actual parameter to encode, you have to physically click on the original file IN Compressor's batch window.
so you import file.mov into compressor
you CLICK on file.mov
THEN you select whatever parameter you want to use
if you want to add more than one setting, you CLICK on file.mov AGAIN and set your next setting
FINALLY you click on submit
Mikey M.

How can I open my file after 'cannot find -filename-' error message?

OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

TS1389 I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situatio

I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situation happens.

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

How do I resolve the "Mozilla cannot find runtime" error message when I try to start Firefox?

Mozilla Firefox updated to version 36.0. When I click on the Firefox icon to open it I receive the message: "Mozilla cannot find runtime" I receive the same message if I try to open Firefox by selecting "firefox.exe" from within the Program Files. I subsequently uninstall Mozilla Firefox and reinstall it. It will open and run normally right after the re-installation. Then if I close the program and try to re-open it again, I get the same "Mozilla cannot find runtime" error message.
The only way I can get Firefox to open is if I uninstall and re-install it every time I want to open it after the initial re-installation.

''sage68 [[#answer-700841|said]]''
<blockquote>
Hi Adriel,
The "Mozilla cannot find runtime" problem has returned. It occurs in two situations:
1. When Firefox tries to download updates using "updater.exe" (version 36.0.0.5531), which causes my "Norton Internet Security" program to notify me with the message: "Auto-Protect has removed security risk Suspicious.Cloud.9.B" This message is shown every time "updater.exe" activates.
</blockquote>
I also have experienced this during several upgrades, not just the latest. (I am using Windows XP and Norton Security Suite.) Norton identifies c:\program files\mozilla firefox\updated\xul.dll with the Suspicious.Cloud.9.B virus and removes the file. I can set the Norton installation to accept xul.dll but it would make more sense for a Mozilla expert to contact Norton and work out a permanent solution, for all who are facing this problem.

New Ipad and cannot sync contacts; error message unable to load data class info from sync services; reconnect or try again later

new Ipad and cannot sync contacts; error message on Itunes - unable to load data class info from sync servies; reconnect or try again later

For Windows - look at this.
http://support.apple.com/kb/TS1567?viewlocale=en_US
For Mac - maybe this applies
http://support.apple.com/kb/TS3744
I just picked these out by going to the box to the right called - More like This.

"Cannot find Symbol" error message

I have a "cannot find symbol" error message on line 5 below in
the driver class.
Thank you for your assistance
1 public class GameLauncher
2 {
3 public static void main(String[] args)
4 {
5 GuessGame game = new GuessGame();
6 game.startGame();
7 }
8}
public class GuessGame
public void startGame()
Player p1;
Player p2;
Player p3;
int guessp1 = 0;
int guessp2 = 0;
int guessp3 = 0;
boolean p1isRight = false;
boolean p2isRight = false;
boolean p3isRight = false;
int targetNumber = (int) (Math.random() * 10);
System.out.println(" I'm thinking of a number between 0 and 9....");
while(true)
 p1.guess();
 p2.guess();
 p3.guess();
 guessp1 = p1.number;
 System.out.println("Player one guessed " + guessp1);
 guessp2 = p2.number;
 System.out.println("Player two guessed " + guessp2);
 guessp3 = p3.number;
 System.out.println("Player three guessed " + guessp3);
 if (guessp1 == targetNumber)
 p1isRight = true;
 if (guessp2 == targetNumber)
 p2isRight = true;
 if (guessp3 == targetNumber)
 p3isRight = true;
 if ( p1isRight || p2isRight || p3isRight)
 System.out.println("We have a winner ! ");
 System.out.println("Player one got it right? " + p1isRight);
 System.out.println("Player two got it right? " + p2isRight);
 System.out.println("Player three got it right? " + p3isRight);
 System.out.println("Game is over ! ");
 break; //game is over so break out of loop
 else
 //we must keep going because no one guessed the number !
 System.out.println(" Players will have to try again ! ");
 } // end of if/else
} // end of loop
} // end of startGame() method
} //end of class
public class Player
int number = 0; // the guess is stored here
public void guess()
 System.out.println(" I'm guessing " + number);
---------------------------------------------------------------

Thank you . You were right . I didn't set up the classes correctly.
I corrected a few other errors and the program runs ok !
Below is the corrected code and the output
public class GameLauncher
public static void main(String[] args)
 GuessGame game = new GuessGame();
 game.startGame();
/* One possible set of output is
I'm thinking of a number between 0 and 3....
I'm guessing 1
I'm guessing 3
I'm guessing 0
Player one guessed 1
Player two guessed 3
Player three guessed 0
We have a winner !
Player one got it right? true
Player two got it right? false
Player three got it right? false
Game is over !
public class Player
int number = 0; // the guess is stored here
public void guess()
 number = (int)(Math.random() * 4);
 System.out.println(" I'm guessing " + number);
public class GuessGame
public void startGame()
 int x = 0;
Player p1 = new Player();
Player p2 = new Player();
Player p3 = new Player();
int guessp1 = 0;
int guessp2 = 0;
int guessp3 = 0;
boolean p1isRight = false;
boolean p2isRight = false;
boolean p3isRight = false;
int targetNumber = (int) (Math.random() * 4);
System.out.println("\n I'm thinking of a number between 0 and 3....\n");
while(x <5)
 p1.guess();
 p2.guess();
 p3.guess();
 guessp1 = p1.number;
 System.out.println("\nPlayer one guessed " + guessp1);
 guessp2 = p2.number;
 System.out.println("Player two guessed " + guessp2);
 guessp3 = p3.number;
 System.out.println("Player three guessed " + guessp3);
 if (guessp1 == targetNumber)
 p1isRight = true;
 if (guessp2 == targetNumber)
 p2isRight = true;
 if (guessp3 == targetNumber)
 p3isRight = true;
 if ( p1isRight || p2isRight || p3isRight)
 System.out.println("\nWe have a winner ! ");
 System.out.println("Player one got it right? " + p1isRight);
 System.out.println("Player two got it right? " + p2isRight);
 System.out.println("Player three got it right? " + p3isRight);
 System.out.println("Game is over ! ");
 break; //game is over so break out of loop
 else
 //we must keep going because no one guessed the number !
 System.out.println(" Players will have to try again ! ");
 } // end of if/else
 x = x + 1;
} // end of loop
} // end of startGame() method
} //end of class

Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"

Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"
== This happened ==
Every time Firefox opened
== Since 6/7/2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; DS_gamingharbor; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hello Jignesh.
This issue has been reported before by other users, and it turns out it's the effect of malware. In other words, your system is infected. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.

Alert! The page yu are trying to view cannot be shown because an erros in the data trabnsmission was detected. What is causing this error?

when visiting the website www.ontwowheels.nl I get the error:
Alet. The page you are trying to view cannot be shown because an erros in the data transmission was detected. I than have to clear my history before I can see the page once. After a visit I get the Aleret again. What can cause this error? When I use IE there is not such a problem. Also when I use IE TAB all is fine

From the http log: 
 
nsHttpTransaction::ParseHead [count=236] 
nsHttpTransaction::ParseLine [HTTP/1.1 304 Not Modified] 
nsHttpResponseHead::ParseVersion [version=HTTP/1.1 304 Not Modified] 
Have status line [version=11 status=304 statusText=Not Modified] 
nsHttpTransaction::ParseLine [Content-Type: text/html] 
ParseContentType [type=text/html] 
nsHttpTransaction::ParseLine [Content-Length: ] 
invalid content-length! 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
nsHttpConnectionMgr::ReclaimConnection [conn=d1e980] 
STS dispatch [3b04b20] 
nsHttpConnection::CloseTransaction[this=d1e980 trans=4e23aa0 reason=804b001d] 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
 
Firefox is receiving malicious content-length 
Reason 804b001d ->> NS_ERROR_CORRUPTED_CONTENT 
A transport level corruption was found in the source document. for example 
a document with a calculated checksum that does not match the Content-MD5 
http header.

Compressor 2.3.1 Cannot submit batch error message What is causing this?

Similar Messages

Maybe you are looking for