Compressor don´t works

Only a big grey window, no functios, actions or new files can be added. I´ve tryed reinstaling the product but stills the same.
Version 4.1.1

Hi Dan, in addition to Russ's very helpful post, you might also go in and remove the following objects as well so that the compressor v4.1.1. UI initialises as if it were new. Use the Finder's trash or the unix rm -rf command to remove:
your home directory's ~/Library/Saved Application State/com.apple.Compressor.savedState folder
/Users/Shared/Library/Application Support/Compressor folder if it exists
Post your results for others to see.
Warwick
Hong Kong

Similar Messages

  • Final cut and compressor don't work! Please help!!

    Hi, I am having serious problems with my mac and it is not the first ime this has happened when I work to a deadline. Surely this is not some cruel twist of fate, rather mismanagement on my part? But how, why?
    I am running FCP 5.1.4 and Compressor 2. FCP will not load at all at the moment and I have tried using Onyx to clean up the system, FCP Rescue to delete preferences. I have freed up additional space on my start up drive, which was admittedly low before I did so. I have accidentally erased some scratch files, but have managed to get so far on start up as to reset them. I really do not know what to do here and am desperate to get to work. I can not get beyond the serial registration window, and Activity Monitor comes up FCP not responding, every time after about 30 seconds.
    As for Compressor, well it seems to quit whenever it feels like it, and the batch monitor function crashes immediately up launch.
    I am really deperate here for input, and have experienced these sorts of problems in the past when running decompressing to HD quality in FCP, simultaneously running Compressor and or DVD Studio Pro.
    My machine should be powerful enough though with 4 x dual 2.5 processors and gigs of ram, or so I thought...
    Thoughts very welcome. Thanks in advance!

    also try running the FCS apps installer (no additional content), sometimes this fixes the problem, it doesn't take too long and is similar to a refresh of the apps, especially if you are having problems starting apps, or serializing them and you have a valid serial! After you install, don't start the apps, run disk utility, repair permissions, reboot and then start up FCP and serialize.

  • SUBMIT FUNCTION ON COMPRESSOR IS NOT WORKING

    Hi Everybody!
    I was overseas for a while and when I came back to work, my workstation was updated I guess.
    I'm using the FINAL CUT STUDIO 3, I did not any updates yet.
    My issue is when I'm trying to send a sequence, from the timiline in final cut (SEND TO/COMPRESSOR) everything seems to be normal. Once I do all the settings and destinations on COMPRESSOR, and I'm ready to start the render, I'm able to see the SUBMIT button, but it seems to be inactive...
    Probably u have already figured out the way to fix this issue...
    please help guys, this is delaying my overall process so much!
    Thanks!

    Hi everybody!
    Compressor don't works! I can't use the submit function because it doesn't work. Help me!
    I removed compressor and Qmaster and re-installed them: in this way the submit function works and I can save the job on "this computer", but when I download the compressor's upgrade the submit function stops to work.
    I'm sorry, I'm italian and my english is very bad!

  • Compressor doesn't work/won't install after FCP5 install

    We recently "upgraded" one of the G5s in our lab to Final Cut Pro 5 from FCP HD 4.5 (these were both Academic versions if that matters, so it's not really an upgrade, you buy a new license at academic pricing). I don't remember which we did first, but we also upgraded this machine to Tiger at the same time.
    The guy that does most of the video work on this machine reported to me that compressor wasn't working. That it would launch and crash, and sure enough it does. So I did some investigating, and the version of Compressor that appears to be installed on the system is 1.2.1, but doesn't Compressor 2 come with Final Cut Pro 5 (or is it just Studio)? I tried to reinstall from the disk and and on the install screen where it lists the packages to install (the 'Custom Install on "Macintosh HD"' screen), Compressor shows up as unchecked, greyed out and with "Skip" in the Action column. I've even tried removing Compressor from the Applications folder and that doesn't seem to make a difference. Is there any way for me to force the installer to install the version of Compressor on the Final Cut Pro 5 disk?
    Something seems to be messed up. Any help would be greatly appreciated. Thanks!
    PowerMac G5   Mac OS X (10.4.3)  

    OK, it took some fiddling, but I got Compressor to install correctly. First I tried the instructions Apple has here:
    http://docs.info.apple.com/article.html?artnum=93234
    but that didn't help.
    So then I found this page with a brief article on "Tricks to install Compressor 2 on G3 Mac":
    http://www.xlr8yourmac.com/archives/jun05/060305.html
    Not very descriptive, but I basically had to make a local copy of the Compressor package from the Final Cut Pro Install disk, then go in and remove the InstallerCheck and VolumeCheck files and then manually install that package by itself.
    I did a reinstall of FCP5 from the disk for good measure after that, and then a software update. It still says "Skip" for Compressor vs. "Update" for everything else when you are in the FCP installer. Everything seems to be working fine now though.
    This seems like a serious problem in Apple's Final Cut Pro 5 installation package (at least for the academic version and whatever sequence of steps got us into this state).

  • Compressor doesn't work anymore....

    Hello,
    I got a really strange bug,
    I can not use Compressor anymore...
    I can't see the "project" window where there is all my video-sequence...
    I can only see these windows :
    • "Settings / Destinations"
    • "Inspector"
    • "Preview" (but the preview window looks very buggy, i think...
    • "History"
    So I can't add any new video to compress/export... and I can add any setting to export the videos...
    I try 2 times, to errase all the Compressor Applications and application support and prefs..
    and try to reinstall from the original DVD.
    but it don't work again and again....
    PLEASE HELP !!!
    now, I don't know what to do...
    Perhaps I didn't erase & re-install the applications and compressor files properly,
    but, CAN ANYONE HELP ME PLEASE ?!!
    Thanks in advance.

    keyman: Try following the steps Compressor Zealot links to. Read the instructions carefully, and make sure you remove all the Compressor/Qmaster files before reinstalling.
    Eyebite wrote:
    don't plan on using Virtual Clustering. As far as I can determine, no one has that working yet.
    Uhmmm... Virtual Clustering works fine, but you can not use virtual clustering when sending your sequence directly from FCP to Compressor.
    Compressor: Don't export from Final Cut Pro using a Virtual Cluster
    To transcode your FCP-sequence using Virtual Clustering with Compressor 3, you can export your sequence as a self-contained ProRes file, and then bring that file into Compressor.
    Keep in mind that job segmenting is not always good for compression.
    Job Segmenting and Two-Pass (or Multi-Pass) Encoding
    If you choose the two-pass or the multi-pass mode, and you have distributed processing enabled, you may have to make a choice between speedier processing and ensuring the highest possible quality.
    The Apple Qmaster distributed processing system speeds up processing by distributing work to multiple processing nodes (computers). One way it does this is by dividing up the total amount of frames in a job into smaller segments. Each of the processing computers then works on a different segment. Since the nodes are working in parallel, the job is finished sooner than it would have been on a single computer. But with two-pass VBR and multi-pass encoding, each segment is treated individually so the bit-rate allocation generated in the first pass for any one segment does not include information from the segments processed on other computers. First, evaluate the encoding difficulty (complexity) of your source media. Then, decide whether or not to allow job segmenting (with the “Allow Job Segmenting” checkbox at the top of the Encoder pane). If the distribution of simple and complex areas of the media is similar throughout the whole source media file, then you can get the same quality whether segmenting is turned on or not. In that case, it makes sense to allow segmenting to speed up the processing time.
    However, you may have a source media file with an uneven distribution of complex scenes. For example, suppose you have a 2-hour sports program in which the first hour is the pregame show with relatively static talking heads, and the second hour is high-action sports footage. If this source media were evenly split into 2 segments, the bit rate allocation plan for the first segment would not be able to “donate” some of its bits to the second segment because the segments would be processed on separate computers. The quality of the more complex action footage in the second segment would suffer. In this case, if your goal were ensuring the highest possible quality over the entire 2-hour program, it would make sense to not allow job segmenting by deselecting the checkbox at the top of the Encoder pane. This forces the job (and therefore, the bit-rate allocation) to be processed on a single computer.
    Note: The “Allow Job Segmenting” checkbox only affects the segmenting of individual jobs (source files). If you are submitting batches with multiple jobs, the distributed processing system will continue to speed up processing by distributing (unsegmented) jobs, even with job segmenting turned off.
    From the Compressor User Manual

  • COMPRESSOR WON'T WORK

    I bought the imac i7 + FCS3 editing suite, compressor WON'T WORK! I spent all this money about $5000 on "quality" gear and I have to struggle to get it to work?
    <Edited by Host>

    Hi,
    You don't mention any previous experience with either FCS in general or Compressor in particular, Perhaps if you were to peruse the manual you
    might get it to work.
    J>H<L

  • "Enable Swipe" don't work and Tablet Layout on a Smartphone

    Hi there,
    I have two big problems with my own site www.mhgrafikdesign.de:
    1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
    2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
    Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /

    This is now a slideshow created with Muse: Homepage
    The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
    Next to this problem, I also run into these things:
    1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
    2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
    3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
    But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js

  • Adobe Flash & Javascript don't work even though Enabled

    Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
    No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
    Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
    I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
    Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
    PLEASE HELP as this is crippling for very important work deadlines I have.
    This is what else I know and have tried:
    I have a Toshiba Satellite C75D-A Laptop;
    Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
    RAM: 8 MB;
    OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
    Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
    Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
    My Device Manager graphics driver updater states: “driver software is up to date.”
    From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
    I am using Latest Firefox version 35.0.1; and
    Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
    I turned off hardware acceleration in FF Tools>Options>Advanced>General
    I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
    I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
    I have Windows Media Player and Quicktime installed.
    Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
    “QuickTime plugin takes over Flash” at:
    http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
    (note underscores in place of spaces in string; underscores not insertable here)
    Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
    (I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
    http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
    & here:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
    Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
    I tried Disabling Protected Mode in Flash 11.3 as explained here:
    http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
    (note underscores in place of spaces in string; underscores not insertable here).
    It did not solve the issue.
    I also deleted all storage & data in Flash Player as advised. This had no effect either.
    I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!

    ''guigs2 [[#answer-684038|said]]''
    <blockquote>
    I truely admire the efforts that have been made to make this work.
    "“We are unable to find a driver for your system.” "
    For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
    Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
    Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
    </blockquote>
    Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
    The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
    Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
    Thanks again!

  • IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

    I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
    But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
    Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
    The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
    My iPod has been like this for over a month now, help would be appreciated

    Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi 

  • TV don't work with OSX Server software?

    Everything worked great BEFORE I updated our MacMini Intel to OSX Server software, now iTunes can't find the recent found Apple TV. And therefore the connection is gone and the syncing don't work anymore.
    Any work-around or suggestions on how to solve this?
    Or do I have to revert to previus userversion of OSX to make it work again?
    Is there a limitation built into OSX Server software or is there maybe some kind of firewall / preferences etc that needs to be adjusted? (The built in firewall has been disconnected.)
    FYI:
    All apps are up to date. The Mac Mini + Apple TV is on my local network at home and I'm trying to make it my family's digital hub for all family-related media.
    MacBook Pro CD2 & X-servers Mac OS X (10.4.9)
    MacBook Pro CD2 & X-servers   Mac OS X (10.4.9)  

    1) I've not tried to reset ATV from scratch. But it works fine on other Mac's on the network (sharing).
    2) Security options, yes I belive so to. I've followed all instructions and opened all ports I've seen mentioned i apples Knowledge database / support. Still don't work. Maybe I've missed some ports...
    3) YES! It works fine sharing the MacMinis lib over the network.
    4) Today I also tried to reinstall iTunes. But no luck.
    Any mor suggestions anyone? Thx
    I really wanny solve this, otherwhise my ATV is pretty useless for me...

  • Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Hi there
    I'll pass your details to our Russian team and they'll contact you to assist further.
    Kind regards
    Bev

  • Bookmarks exist but don't work in PDF (exported from InDesign)

    Hi all,
    I had a similar problem a few months ago where SOME cross-references within a document weren't taking you to the right place when exported to PDF although they appeared to work fine in InDesign (the "source" and "destination" arrows took you to the right place). Someone suggested exporting the file to IDML and importing again, which worked fine.
    Now I'm working on the same document (an update) but it's grown a bit and so each chapter is in its own file within a book. Problem is similar but not the same. Some cross-references work fine in the generated PDF, others are recognised as being links (cursor changes) but NO effect when clicking on them... not taking me to the wrong place, nothing is happening at all. ALSO the table of contents AND the bookmarks don't work.
    I've exported each chapter to IDML, recreated the InDesign files and recreated the book, but still no joy. If all else fails, I'll put the book back into a single file but I'd rather not go through this pain each time I have to update the book (especially as this latest change was really tiny).
    Any suggestions? Are cross-references between files in a book known to be problematic? And if they are, has the problem been addressed for CS5.5? (I'm looking to use InDesign for a journal that will contain a lot of links between elements, but the turnaround time is tight and I'm wary of this issue being a problem each month.)
    Currently using CS5 on Windows 7 Professional, and Acrobat 9 Pro Extended was installed as part of the Tech Comm Suite.
    Thanks in advance,
    Alison

    This is so funny...I was just about to close my email and look up the
    Forums to profusely thank the person who posted the solution to a similar
    problem I was having in CS4.  I'd created numerous hyperlinks in Indesign
    documents and sometimes the links worked in a pdf, and sometimes not.  The
    problem solver was talking about a solution in Word, but I found the same
    type of text in the PDF settings box that pops up when you want to save the
    pdf.  There are all kinds of checkboxes and I'd thought I was doing enough
    by checking 'add hyperlinks'...but the advisor said you have to make sure
    'tagged PDF' is CLEAR.   So the same thing will probably work for you with
    your bookmarks!  (...if the settings are similar in CS5 of course, and
    there's no reason they shouldn't be.  I guess.)
    The only thing is, there's a lot of what we call 'ant work' ahead of me.  I
    have to go back to each InDesign doc and retype the text in the home font,
    and create the hyperlinks over again.  Luckily, the hyperlink destinations
    are still there.  It's not enough just to export the document again with
    the Tagged checkbox cleared, and you can't create a new hyperlink over an
    old one; the 'new hyperlink' option isn't available under Interactive. So
    you may have the same problem.
    Let me know if this works!  I'm off to thank the person...
    Susan

  • Some share buttons don't work on my tablet

    I have a Samsung tablet, model GT-P3113 and its Operating System is Android. In some websites when I click share buttons like addthis and sharethis, they don't work and are inactive. I refresh the page and it doesn't help. For example, none of share buttons of http://www.threehosts.com/ratings/comparison-software/wordpress-vs-joomla-vs-drupal.html work on my tablet, but when I go to this page via my Laptop the share buttons work. My laptop OS is Windows 8.
    One of my friends has iPad and I sent this link to him. The share buttons work correctly for her.
    Does my problem come from my Android which doesn't support share plugins perfectly, or it comes from my tablet model?
    Is there anyone with Samsung GT-P3113 on this forum? If so, could you please test the mentioned page and tell if its share buttons are active or not?

    I have the Samsung Galaxy Tab 2,  7", model GT-P3113, wifi only (not on my Verizon plan).  It's currently running Android 4.2.2; the share buttons on the site you listed above seem to work for me...I didn't actually go through and "share" anything, but I did get to this screen and it appears that all I need to do is log in to whatever service I want to  use to share the post :

  • Upgraded to yosemite now my speakers don't work and i can't play videos on Facebook.

    When i play a video on face book I'm told i need to upgrade flashplayer, i wasn't even aware i had it downloaded! I have got rid of flash player (i think ) and now I'm told i need to download FP before i can watch videos. I can't play games on FB either and my speakers don't work.
    I wish i hadn't upgraded to Yosemite to be honest as i prefer the old layout and it seems to have caused me problems. Everything was working fine before the Upgrade to Yosemite.
    Im not good with computer terminology so please reply as simply as possible :-)
    Thank you

    Try un-installing and then re-installing.
    Adobe Flash Uninstaller
    Adobe Flash Player
    Adobe Flash Player updates available for OS X on October 24, 2014
    Sound.
    Sound – can’t hear sound from speaker - Yosemite
    Sound – No Sound After Upgrade (2)
    Sound Levels - Troubleshoot
    Sound – Troubleshooting Internal Speakers

  • Menus on some web sites don't work

    I have just activated 2 new Lumia 520 phones with Windows 8 mobile. (updated to Amber)
    When browsing the web, the menus don't work on a couple of web sites that I have written.
    These menus use Javascript to show drop down lists and to navigate to the appropriate pages. When you click a link on the menu, the drop down menu appears for a couple of seconds, then disappears. Even in the couple of seconds that the dropdown appears, it can not be clicked.
    Interestingly, these web sites also use javascript to open overlay pages when a thumbnail picture is clicked, This action works.
    These menus have been regression tested in all the major browsers and they work on a PC, Mac, iPad and Android but seem to fail on Windows 8 mobile.
    I searched and can't see any option that allows me to enable or disable Javascript.
    Here are links to those 2 sites:
    http://www.garynancy.com/index.html
    http://www.chisholmtv.com/
    What am I missing?

    The menuscript (popupmo.js) you are using will not work.
    I'd suggest you take this to http://developer.nokia.com where you will likely find more help as this is a general user to user support platform.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Maybe you are looking for

  • How to edit VI in a library?

    I downloaded the example Vi library "Sine Swept Frequency Response", which contains a VI showing how we can get the frequency response of a filter. I would like to integrate this functionality in my own VI. However, when I start the VI, I get no edit

  • How to use NodeIterator on an XML document

    I have been trying to create a NodeIterator using the following code: try FileInputStream inStream; Document doc; String xmlDocumentPath = "I have a real path here"; inStream = new FileInputStream(xmlDocumentPath); DOMParser parser = new DOMParser();

  • Skype Cant Connect! HELP

    Hello, I Do not have and Firewall, or AV programs on my PC I Havent Done anything besides try to uninstall and re-install skype. I keep getting the error "skype cant connect" Anyone got an Idea of what i can do? Windows 7 64x Bit

  • MF Toolbox won't run - Max OSX 10.7.5 Lion

    I just bought a new ImageCLASS D480. I downloaded and installed the Printer, Fax and Scan software from canon.com. I have my printer networked attached and I can print from my Mac mini. However, When I try to run MF Toolbox from Applications/Canon MF

  • Finder issue - won't launch new window, new plist resets immediately

    Hey folks, just a series of strange little problems. a.) When I launch Finder, it's a blank window. I have to press one of the buttons for a view to get it to show anything at all. b.) I can't launch another Finder window. This is a problem if I need