Compressor Won't Work after Crash

Thanks for reading,
I had my final sequences set up for my premiere this evening, when my computer had an unplanned shutdown. After restart (and many subsequent restarts) I find compressor will set up properly, but when I want to do a batch, it just hangs. It doesn't create a new file, and it doesn't seem like it's doing anything.
Any help would be appreciated.
David

[Compressor Repair|http://www.digitalrebellion.com/compressor_repair.htm]

Similar Messages

External keypad won't work after installing OS 7.

External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

Quicktime won't work after lion upgrade

quicktime won't work after installing Lion

I am having the same problem. Anyone else have this problem and find a solution??

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Compressor 3 not working after reinstall of FCS2

Hello
I'm having trouble with FCS 2 Compressor and Motion. My system was running a little slow so I did a uninstall using App Zapper to remove the suite. The installation went fine however when I tried to launch compressor it would quit before the splash screen comes up every time. He's what puzzles me the most I download the latest update to the suite and Compressor and Motion is not registering at all. It said Motion must be install I get the same message with Compressor also. Yet I can launch Motion and use it. Any ideals? I did a reinstall twice and even reinstalled , FCS1 then upgraded to FCS2 and compressor won't work on FCS1 either. Can someone direct me what to do or what software to get a clean uninstall. Everything works but Compressor. Have to get back to work will check later this morning.
Lee

I"m having the exact same problem... and from reading in forums the only idea is to re-install my OS. Backing up my Hard drive and updating is going to take a day - i'm not impressed with this idea.
Wondering if you have solved this issue or has anyone else.
Again the problem: Everything in FCP studio 2 works except Compressor. At first it wouldn't submit to Batch and NOW afterre-install attempts it won't even open gives the error:
Link (dyld) error:
Symbol not found: __ZN6aecore14CMovieInstance13startTimecodeEv
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
Expected in: /Library/Frameworks/AECore.framework/Versions/A/AECore
Yah, I removed those files as per instructions on Apple's support page, assuming that a re-install would put them back.
If you pay this much for software you should be able to open it NO?
Appreciate any help from all you other frustrated Mac Lovers. I too am a devoted fan, but wish they would someday achieve perfection.
Message was edited by: Host

Mission Control won't work after sleeping. Upon Start up it's fine, but after sleeping it won't work by track pad or keyboard.

Since updating, Mission Control won't work after sleeping. Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.

No, the versions of iPhoto on the iPad and on OS X are totally different.
What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

COMPRESSOR WON'T WORK

I bought the imac i7 + FCS3 editing suite, compressor WON'T WORK! I spent all this money about $5000 on "quality" gear and I have to struggle to get it to work?
<Edited by Host>

Hi,
You don't mention any previous experience with either FCS in general or Compressor in particular, Perhaps if you were to peruse the manual you
might get it to work.
J>H<L

Apache won't work after 10.5.2 update

Apache won't work, after I installed the 10.5.2 update.
When I type the following in the terminal: sudo apachectl -t
I get a error:
/usr/sbin/apachectl: line 81: 711 Segmentation fault $HTTPD $ARGV
Does anyone know how I can solve this?
thank you!

I too had the same problem after the auto update 10.5.2 - specifically the 2008-002 update broke my machine in a number of areas.
I downloaded the package and ran it, this seems to have mopped up the problems caused my the first run.
The update is located at:
http://www.apple.com/downloads/macosx/apple/security_updates/
Look for 2008-002 (Leopard) it's about 50MB.
Hope this works for you too.

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

HT204350 scanner won't work after upgrade

scanner won't work after upgrade

Hey srohall,
Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

Firmware update won't work after you've tried the Narf/Blanka method?

Many ppl have reported that their Firmware update won't work after they've tried the Narf/Blanka method for Dualbooting Windows. [For some reason, it doesn't).
Formatting the startup, reinstall etc WILL work ... because of what our friend says here : http://discussions.apple.com/message.jspa?messageID=2076211#2076211
Fortunately, it isn't necessary To Reformat etc... (at least for the firmware update) Apparently, as long you boot from a different Disk to the one you've 'messed with' - such as , say, an external FW Drive, the Firmware updater works.
Had the same problems, same reasons on a 20". Booting from external FW Drive made it happen for me.
May someone be helped by this e-missive....

Sorry: the above is (partly) wrong ... - it'll get you past the firmware update but won't get you past the Boot Camp Assistant ... - it wants to see a single partition No matter what ...
[Just for that, I'm gonna see if I can mess with the 'can't do this on an external drive' requirement ... by moving an external to internal then back out again grin)
best of luck...

Open Directory won't start after crash no logins

Server was crashed due to work in the room. OD will not start. I've tried every fix I can find, but the main problem is that this command will not work:
sudo launchctl unload /System/Library/LaunchDaemons/org.openldap.slapd.plist
I also have time machine backups but which files should I replace? Thanks

Hi,
First thing to check is that DNS is set up correctly.
in Terminal, type:
$ sudo changeip -checkhostname
This should return your server IP address, current hostname and DNS hostname; the hostnames should be the same.
Finally it should issue a message that says:
The names match. There is nothing to change.
dirserv:success = “success”
if there is a mismatch here, you will need to fix in the Network tab of the Server app, and the DNS settings.
It could also be a problem with a remnant of a previous OD setup although you say that you are attempting to set it up, so not sure why there would be a remnant.
You can "clean out" the old LDAP info by issuing this command but it will wipe out your Open Directory databases on the machine you issue it on; you have been warned....
Doing this will then let Server app prompt you in the OD settings to 1. set up OD or 2. restore from an archive.
The command is:
$ sudo slapconfig -destroyldapserver
Finally , if you are having problems, turn on logging:
$ sudo slapconfig -enableslapdlog
this writes OD logs to /var/log/slapd.log
Hope that helps. I had that exact issue on a server that was hosting a replica and that stopped working after update of server.app .

IPod touch 3G won't work after falling in water? Help!

Ok it's been 3 months since my iPod touch fell in the...toilet. I immediately put it in rice after pushing all the buttons. It was only in the water for a second. When I picked it up the screen was dim, flickering, then when black. I wiped it off and put it in rice. I left it in rice for about four days. I finally plugged it up to the charger and after 20 minutes it came on. It told me I needed to plug it up to iTunes so I did. I restored it and when it was restored I tried to slide the bar at the bottom of the screen but it would never register. So I let it die and when I charged it again it wanted me to restore it AGAIN! I've restored it about five times!! Each time the touch screen won't work and it doesn't hold a charge very well. Also every time it does it wants me to restore it. What's wrong with it and how can I fix it? Oh and the home button doesn't work.

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
SarahAsh004 wrote:
Could an apple person help? If so, how much would it cost?

ITunes won't work after updating to iOS 8.3

After updating to iOS 8.3 my iTunes App on my iPhone 6 Plus and iPad Air now both don't work.
If I go to play an sample of a song, the little square box with the cover on spins around and then spins back around and no music will play. I'm all so unable to play any music that I've already purchased via iTunes on my iOS devices.
Any comments on what could be causing this?
All so, on another note. My friend has just updated to IOS 8.3 and he just noticed that he no longer even has the iTunes App on his iPhone 5.
Thanks.

After posting this, I've since found out that my iOS iTunes App on my iPhone 6 Plus works all OK when on WiFi, it just won't work when on the data/3/4G connection.
Anybody else having this same issue since updating to iOS 8.3?

Compressor Won't Work after Crash

Similar Messages

Maybe you are looking for