Computer forcing me to restart - HELP!

Not impressed, 2 months out of apple care... Every now and then the computer forces me to restart, the screen darkens and tells me I have to restart.
I reformatted (10.6), used the computer for a bit - it's happening again. Here is part of what came up after this last time, I don't know how to make sense of it.
Interval Since Last Panic Report: 5866 sec
Panics Since Last Report: 1
Anonymous UUID: 0439E587-C42C-48CF-B3CB-507DD6126441
Fri May 28 19:02:52 2010
panic(cpu 0 caller 0x29b556): "Spinlock acquisition timed out: lock=0x863e80, lock owner thread=0x6000b7c, current_thread: 0x628cb7c"@/SourceCache/xnu/xnu-1456.1.25/osfmk/i386/locks_i386.c:346
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
So I have reformatted, haven't yet installed updates - although I doubt it's a software problem at this point. There is after market ram in the computer, but I have the original sitting here. Is there a way to tell if its the ram before I swap it out?

Courtnie:
Is there a way to tell if its the ram om the Apple Hardware Test I swap it out?
Download and run Rember-Memory Test to check your RAM.
You may also want to boot from the Apple Hardware Test disk and run the Extended test in a loop (Control + L during test). Let it run for several loops as it sometimes take a while for intermittent issues to surface.
cornelius

Similar Messages

  • I can't back up my iPhone4.  When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

    I can't back up my iPhone4.  When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

    Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?

  • My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    Deleting the System Preference or other .plist file
    ..Step by Step to fix your Mac

  • I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying

    I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying

    If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
    One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
    The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
    Steve

  • I am updating my mac book to Snowleopard but everytime the install reaches 45 minutes the computer just restarts.Help!!

    i am updating my mac book to Snowleopard but everytime the install reaches 45 minutes the computer just restarts.Help!!

    First run disk utility on your hard drive to repair it , also repair permissions then give it a try. 

  • When I try to download xcode 4.6.2, my computer shuts down and restarts telling me I have an error. HELP?!??

    When I try to download xcode 4.6.2, my computer shuts down and restarts telling me I have an error. HELP?!?? Can anyone help me?

    Wed Jun 12 21:40:11 2013
    panic(cpu 6 caller 0xffffff80190ac90b): Releasing non-exclusive RW lock without a reader refcount!
    Backtrace (CPU 6), Frame : Return Address
    0xffffff81096e3a80 : 0xffffff801901d626
    0xffffff81096e3af0 : 0xffffff80190ac90b
    0xffffff81096e3b10 : 0xffffff801911c09c
    0xffffff81096e3d40 : 0xffffff8019110e92
    0xffffff81096e3d70 : 0xffffff80190ff954
    0xffffff81096e3ef0 : 0xffffff80190ffa10
    0xffffff81096e3f50 : 0xffffff80193e182a
    0xffffff81096e3fb0 : 0xffffff80190ced33
    BSD process name corresponding to current thread: installd
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID:
    Kernel slide:     0x0000000018e00000
    Kernel text base: 0xffffff8019000000
    System model name: iMac11,3 (Mac-F2238BAE)
    System uptime in nanoseconds: 11938612497736
    last loaded kext at 606795969288: com.line6.driver.xtaudio    7.2.3 (addr 0xffffff7f9b360000, size 1024000)
    last unloaded kext at 207361764339: com.apple.driver.AppleUSBUHCI    5.2.5 (addr 0xffffff7f99ac8000, size 65536)
    loaded kexts:
    com.line6.driver.xtaudio    7.2.3
    net.telestream.driver.TelestreamAudio    1.1.0
    com.logmein.driver.LogMeInSoundDriver    1.0.2
    at.obdev.nke.LittleSnitch    3876
    com.seagate.driver.SeagateGoFlexBlockSizeAdjuster    5.2.2
    com.apple.driver.AppleBluetoothMultitouch    75.15
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AGPM    100.12.69
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.driver.AppleHDA    2.3.1f2
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.driver.AppleUpstreamUserClient    3.5.10
    com.apple.iokit.IOBluetoothSerialManager    4.0.9f33
    com.apple.kext.AMDFramebuffer    8.0.0
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleMikeyDriver    2.3.1f2
    com.apple.driver.AppleBacklight    170.2.3
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.ApplePolicyControl    3.2.11
    com.apple.AMDRadeonAccelerator    1.0.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f33
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard    165.5
    com.apple.driver.AppleHIDKeyboard    165.5
    com.apple.driver.IOBluetoothHIDDriver    4.0.9f33
    com.apple.driver.AppleMultitouchDriver    235.28
    com.apple.driver.DspFuncLib    2.3.1f2
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSurface    86.0.3
    com.apple.driver.AppleUSBAudio    2.9.0f6
    com.apple.iokit.IOAudioFamily    1.8.9fc10
    com.apple.kext.OSvKernDSPLib    1.6
    com.apple.iokit.IOSerialFamily    10.0.6
    com.apple.iokit.IOBluetoothFamily    4.0.9f33
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleGraphicsControl    3.2.11
    com.apple.iokit.IOAcceleratorFamily    19.0.26
    com.apple.iokit.IONDRVSupport    2.3.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f33
    com.apple.driver.AppleHDAController    2.3.1f2
    com.apple.iokit.IOHDAFamily    2.3.1f2
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.kext.AMD5000Controller    8.0.0
    com.apple.kext.AMDSupport    8.0.0
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOGraphicsFamily    2.3.5
    com.apple.driver.AppleSMC    3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.2.0d16
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOFireWireSBP2    4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0

  • Force quitting a "Mac Help" Window

    I was using Numbers on iWork 08 and I clicked the *"Mac Help"* on the main option bar. I typed a question and the Mac Help froze. I assumed that if I closed the Numbers application, that the Mac Help would then clear away. Apparently the problem was not within the Numbers Application, but simply just with Mac Help. I tried force quitting but when I open Force Quit to select Mac Help as one of the programs I quit, it isn't listed in the options. It still has the little Pinwheel showing the Mac Help is loading, and it's been that way for the past hour. It can manually move it around the screen, but it stays in front of whatever windows I have open. I cannot delete it, and the only way I can see it clearing from my screen would be to restart my computer. I do not want to do this, and I am just wondering if there is another way of *force quitting the Mac Help*.

    Try this:
    Open *Activity Monitor* in Applications>Utilities. Sort these by "Process Name." Find *Help Viewer*, then click the *Force Quit* button (looks like a stop sign). That should solve things!
    ~Lyssa

  • ITunes Sign In To Use This Computer / iTunes crashes / iTunes restarts

    I have been having this problem on and off for a very long time now, through at least one major update of the iTunes software. I recently purchased an album from the iTunes store and the problem has returned. I've searched the forums for advice and got a lot of very weird advice. None of it helped.
    The problem is: when I start my MacBook Pro (12 months old, all OS patches installed 10.7.3), iTunes 10.6 starts then request that I "Sign In To Use This Computer for Automatic Downloads." iTunes does not recognize my password; displays a slightly different dialog screen that says "Sign In Required," then back to "Sign In To Use This Computer for Automatic Downloads," which repeats and repeats then switches to the other dialog "Sign In Required," then back to "Sign In To Use This Computer for Automatic Downloads," et cetera. If you cancel out, which it accepts after hitting cancel three times, then navigate to the iTunes Store, the iTunes Store starts to load, then iTunes crashes, asks you if you want to send a report to Apple (I've personally sent at least a 100 of these already), then iTunes restarts. You can't kill it - if you force quit, it restarts immediately.
    Any suggestions other than Authorizing / Deauthorizing / Deleting the SC Info Folder?

    I have this same problem iMac Lion 10.7.3, iTunes 10.6.1(7). Any ideas what I can do to stop it?

  • My ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. I do?

    please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?

    Hey saintbless,
    Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Will not turn on or screen remains dark
    - Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    - If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    - If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    - If the screen remains dark and will not turn on, then your iPod may need service.
    Thanks,
    Matt M.

  • My computer has been spontaneously restarting itself.  This last time I wasn't even at the keyboard, I was across the room.  I don't know what to make of it, completely baffled.

    My computer has been spontaneously restarting itself.  This last time I wasn't even at the keyboard, I was across the room.  I don't know what to make of it, completely baffled.  I'd love some help on this, and if it could come in layman's terms I'd love it even more.

    Hi ...
    Try Troubleshooting the MagSafe adapter
    If the Mac freezes, it may be a preference setting.
    Check System Preferences > Energy Saver
    See if Restart automatically if the computer freezes is selected. If it is, deselect that box.

  • My macbook pro is frozen on desktop mouse no response i have forced shutdown and restarted 3 times no change. What to do ?

    Hi guys and gals
    Have not used my macbook pro for couple of months and now she is frozen - opens to wallpaper on desktop of snow leopard but absolutely no response with mouse or track pad . Screen goes blank after 5 mins then the only response is from the power button . When pressed the screen lights up with window asking if i want to shut down or.....enter has no response . Only option is to force shutdown and restart yet this does not resolve issue.....back to square one!!!!
    Help???

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select  
    View ▹ Show Log List   from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?

    Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?
    It starts up and asks for a language. After English, it goes to the OS X Utilities screen. I have gone to disk utility and verified the disks. They both say they are okay. If I click repair, it comes back with an error saying "Live file system repair is not supported." I just want my computer back to normal! Please help! I am still in Mavericks if it matters.

    Do you have a backup? If so, in the Recovery Partition go to Disk Utility/Erase, select Mac OS Extended (Journaled), click Option GUID, and erase the disk. Then re-install the OS. Reboot and use Setup Assistant to recover your data.

  • Left USB-Port dead after wake from sleep. Just restart helps.

    I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
    As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
    Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
    I'm really angry now.
    When will Apple solve the most urgent problems in Leopard?
    Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
    Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
    FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

    Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
    Come on already Apple. This is a SERIOUS, SERIOUS problem.
    Fix it.

  • My apple tv, all of a sudden, is no longer able to connect to my computer.  I have restarted EVERYTHING, multiple times, still not working.

    My apple tv, all of a sudden, is no longer able to connect to my computer.  I have restarted EVERYTHING, multiple times, still not working.

    Welcome to the Apple Community.
    Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.

  • HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

Maybe you are looking for

  • Issues with Oracle VM Server 3.2.2

    We're beginning to use Oracle VM Server 3.2.2 but we're having several different issues. Any help would be appreciated 1) Attempting to start a VM, the VM doesn't always start correctly. Console is giving us the following (when using xm create): ---

  • Failed to load a java applet to safari5.1(windows 7)--prompt "missing plug-in"(i have installed JAVA JRE),  but succeed in IE and Chrome.

    I suspect this is a minor code error issue. The html code like below, do i need to add other parameter for Safari 5.1 ?  And is there any other method to load applet in Safari? thanks. system is Windows 7, browser version is Safari 5.1 for windows. 1

  • XDCAM offline-online editing

    I'm trying to edit XDCAM offline, but can't really find a useable workflow. What I've tried so far is: 1) Convert XDCAM files in Media Encoder to DV 2) Edit DV 3) Mark DV-Clips as offline 4) Re-Link with XDCAM clips The problem is the XDCAM folder-st

  • Upgrade from 10.4.11 to recent version?

    I am trying to upgrade my Mac OS version, currently 10.4.11. My software upgrade tells me I am completely up-to-date with my software. I am using a Mac Pro 2 x 3 GHz Dual-Core Intel Xeon machine. With 2 GB 667 MHz DDR2 FB-DIMM. What do I have to do t

  • Can I disable the ESC key in camera raw?

    When working in Photoshop in general, I've gotten into the habit of using the ESC key to get out of a tool I'm currently using, but when using Camera Raw, this has the consequence of closing the image I've been working on without saving any of the ed