Computer shuts down when syncing photos

I've been trying to sync my photos with my IPad and out of 2500, when it gets to about 125 my computer completely shuts down. I've tried it 5 times today and am ready to throw my computer outside. Anybody else have this problem?

I have the sames problem. My Samsung laptop with windows 7 shutsdown whilst transfering photos from the laptop to the New Ipad using Itunes. It seems to work if I transfer a small batch off photos, up to 11, but crashes when a larger amount is transfered. I have been unable to find a solution on the web. It is really fustrating me since one of the main reasons for getting an Ipad is to create photo albums.
Has anybody got any new ideas and does anybody know if apple is doing anything about this issue?

Similar Messages

  • Computer shuts down when syncing iPhone

    My computer's been shutting down when I'm syncing my iPhone. No matter how hard I try, it keeps going off.
    I don't think it's heat issue because I tried it when it was cool down or when there's fan- none worked.
    Would you please help me? Turning computer back on every time when I'm syncing my phone is such a pain in the butt. :/

    Doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
    iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

  • Computer shuts down when sync

    computer keeps shuting down when trying to sync

    What version of flash player do you have installed? http://www.adobe.com/software/flash/about/
    Please post the graphics section from about:support

  • Computer shuts down when i try to sync my ipod

    Computer shuts down when i try to sync my ipod

    Just took out the book from the library "Sams Teach Yourself itunes 10 in 10 minutes" by Brad Miser.
    Basics for problems syncing:
    -restart computer
    -make sure device is not out if power
    -try a different usb port...BTW....I contaminated a usb port by someone spilling drink on the usb port end of my ipod cord...bad...
    -run apple's web-based device assistant
    http://support.apple.com/kb/TS1495 (windows) or http://support.apple.com/kb/TB1591?viewlocale=en_US (mac)
    clink for the device...etc.
    this book looks great

  • Desktop Manager shuts down when syncing Outlook 2007 calendar

    Hey,
    I've had my Curve for about 6 months, and now the desktop manager shuts down when syncing the calendar.  It gets throught the address book and then I get a message that an error has occurred and it must shut down.  I sync with an Outlook 2003/XP on my work computer and have no problems, but my home computer runs Outlook 2007/Vista.  I'd love some help figuring out this issue.  Thanks!
    Solved!
    Go to Solution.

    next thing to try is start-run-msconfig
    click on STARTUP tab, and disable all
    restart PC, and try again

  • Computer shuts down when I click on the list or grid display button

    I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

    Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
    Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
    If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
    (If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
    Once we've tracked down some minidumps, we can have a go at analysing them.
    1. Download and install the Windows debugging tools from here:
    http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
    2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
    Once you open Windbg, you will presented with a blank screen.
    3. Click on "File > Symbol File Path". Here you will enter the symbols
    path. Symbols are needed to effectively debug.
    The path will be:
    SRVc:symbolshttp://msdl.microsoft.com/download/symbols
    4. Enter in this path and click OK. Now, go to "File > Save Workspace"
    so that your symbols path is saved for future use.
    5. Go to "File > Open Crash Dump" and load the file.
    (An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
    You will/should get a message to save base workspace information. Choose no.
    Now you will get a debugging screen. It takes a little bit to run it,
    as the symbols have to be downloaded as they are needed.
    After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
    Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
    If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

  • Computer shuts down when trying to create or open a pdf file

    My computer shuts down when trying to create or open a pdf file.

    In that case, you need to update the Acrobat Version at your end. Click on Help -> Check for Updates. Download and install the updates. Make sure your version is 9.5.1

  • Aperture shuts down when uploading photos to Facebook

    Aperture shuts down when uploading photos to Facebook.
    only loads part of the Album?

    This is discussed extensively in the thread at:
    https://discussions.apple.com/message/21603962#21603962
    What exact version of OSX and Aperture are you using?
    Ernie

  • Computer shuts down when I open itunes Store

    Computer shuts down when I open itunes Store. I don't know why or how to fix it.. It used to work, now it doesn't. I haven't done anything differently. I tried to 'repair' it in the add/delete programs.

    Some more info.................I have uninstalled and reinstalled iTunes and Quicktime.  No fix.   I can access the store on my other desktop computer which I also updtated to the newest version, so I think it's some setting in my laptop.   As I said, it works great until I click on "iTunes Store" then it shuts the whole program down.

  • Computer shuts down when burning

    Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
    Toshiba Satellite    

    air traffic controller
    What computer operating system is your Premiere Elements 10 running on?
    If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
    Please review the Adobe document dealing with troubleshooting burn to disc issues
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
    After that, we can decide what next if necessary.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Why is my computer shutting down when i try to sync with itunes

    does anyone know why my computer is shutting down when i'm trying to sync my i pod. I have tried reinstaling itunes but it hasnt helped.

    iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
    or maybe:
    iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

  • Why does my i mac shut down when sizing photos?

    I have a new 27' i mac with 2t drive and 16 gigs of ram  the Pentium i5 quad core 2.8 ghrtz computer running OS 10.6.7. I have the Adobe Master collection CS5 installed and when sizing photos in photoshop my computer shuts down completely. It crashes the computer not just the program.I have re-installed all software including the OS twice. I have all the latest updates installed.
    I have tried using earlier versions of the OS and still have the same problem. One apple tech said there was a letter put out by Adobe in January talking about a conflict with Adobe CS5 and mac OS 10.6.7 but I can't find it. I am also having problems online when filling out online forms or copying and pasting can turn it off as well. Has anyone run into this or similar problems.

    I took my computer to the apple store and they tested the hardware for a week and they did replace the power supply but said they could not find anything else wrong and that the ram was ok too. They said the stressed my computer to the max and could not produce the errors that I could do be sizing a 2mg photo.I've been trying to get this fixed for months.
    One apple tech said that the error message when he saw it crash said it happened in Quartz? I think thats what it was. They reinstalled my OS to an earlier version and thought that might fix it until Adobe came up with a fix. When I got home I found they installed the wrong version of OS. They walked me through a few downloads to put my computer on 10.6.6 they thought the10.6.7 was the issue but its not.

  • Computer shuts down when backing up

    Hello,
    I am using an iMac with Mountain Lion 10.8.3. My Apple Airport Extreme is about one year old (fully updated and current). I am on a DSL connection with AT&T. I am backing up to an external 1.5 TB hard drive (non-Apple brand). There is lots of room remaining on that drive (about 700GB).
    All backups in the past have been smooth sailing with no problem.
    What's happening now are two things (but one of them I think I fixed). At first, Time Machine would try to back up but it would never succeed because it would give a message that there is not enough space available in the drive (it was saying that it needed 10 more GB of free space). But I know that's wrong. I could not figure out how to fix that issue, so I erased the drive completely and started over. Now, I no longer get the "full" message and all appears to be going well----UNTIL......(see next paragraph).....
    Now what happens is that it begins doing the backup process like normal (this would be the first/initial backup since I erased the drive and started over), however, once it gets about 100 GB or so (very rough estimate), the computer SHUTS DOWN. It turns itself OFF. No error window, no warning, no nothing----it just "POOF" turns off. To get it working again, I have to push the power button to turn it back on. There is no error message when I turn it back on.
    I am copying (below) the two most recent Time Machine messages from last night from that neat widget/app that I think pondini invented. I sure hope this helps to diagnosis what is wrong, because I'm stumped.
    The backup log that says "Automatic" is the first one that failed where it claimed there was not enough space to complete the backup. Once I erased the drive completely and started "fresh", that is what the second "Manual" backup is.
    Friday, April 5th
    Starting automatic backup
    Backing up to: /Volumes/Time Machine/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Event store UUIDs don't match for volume: 2TB HD
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Deep event scan at path:/Volumes/2TB HD reason:must scan subdirs|new event db|
    Finished scan
    Found 433286 files (625.62 GB) needing backup
    751.26 GB required (including padding), 741.14 GB available
    Deleted backup /Volumes/Time Machine/Backups.backupdb/ScottPeavler’s iMac/2013-04-04-110906.inProgress/D11ECC13-2EB1-4975-A041-8EEA74F1339B containing 4 KB; 741.14 GB now available, 751.26 GB required
    Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
    Deleted 1 backups containing 4 KB total; 741.14 GB now available, 751.26 GB required
    Backup date range was shortened: oldest backup is now Apr 5, 2013
    Backup failed with error: Not enough available disk space on the target volume.
    Friday, April 5th, 7:58PM
    Starting manual backup
    Backing up to: /Volumes/Time Machine/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 7267FE51-06B9-318F-80B2-EC5D94A925E2 eventDBUUID: DBDDEE41-0BFF-4DB0-AB1A-F7D152B9E065)
    Forcing deep traversal on source: "2TB HD" (mount: '/Volumes/2TB HD' fsUUID: B4DDE136-9D38-302F-A81E-4645F23F6D09 eventDBUUID: B8E29F6D-A35B-4E34-B733-7C2983BD24D9)
    Found 1331692 files (837.62 GB) needing backup
    1.01 TB required (including padding), 1.49 TB available
    Can anyone kindly help? Thanks!

    Do a verify of the local disk. The sudden complete failure sounds like a hard disk or memory issue.
    A5 http://pondini.org/TM/Troubleshooting.html
    So the hard disk is plugged into the computer directly?? If not, then I think you should do it that way. Backup to Extreme USB drive is not reliable.
    YOu don't have an error message for the manual backup.. and I am uncertain what the problem is.
    Do a reset of Time Machine. A4.
    And try again with the hard disk plugged into the computer directly.
    You can look at other suggestions on the troubleshooting page.
    eg http://pondini.org/TM/C4.html
    But if you are doing it with the usb drive in the Airport Extreme please read this.
    http://pondini.org/TM/Airport.html

  • My computer shuts down when I put it to sleep

    Ever since I used some of those auto-download upgrades my Mac shuts down when I put it to sleep. What's wrong?

    Hi gazebo, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Computer shuts down when importing CDs to iTunes! HELP PLEASE!

    Every time I try to import a CD onto iTunes, my computer shuts down. It will let me import one song at a time with no problem, but when I try to load a whole CD, the power just shuts off. Can someone out there who knows about computers please help me?

    Do you have a dual core or dual processer? Sounds like it. Read this it should help you out.
    Oh nm they changed the article to say they fixed the bug with the newest release from yesterday. Go download the latest version that came out yesterday and see if it helps you your PC. You probaly do have a dual processor. The new iTunes fixes that importing CD bug.

Maybe you are looking for

  • Airport Extreme with Airport USB Disk issues - Dont give up just yet...

    Just a heads up for anyone who is having issues with accessing an Airport disk with the latest firmware. After calling Apple support as i was convinced my AEBS was faulty, i have since discovered that if and HFS+ disk cannot be varified and repaired

  • Adding metadata

    hi all we have a fully functional km system.now my reqirement is to add certain properties to the documents in the repository like version,country,client etc (metadata) so that i can search the documents based on them .how can i add this metadata to

  • Designing totals wit BC4J

    How would you design this: You have a table REV of revenues per day (date PER and number REV). There may be more than one row per day (let's say one for each order). You have to make BC4J that give you access to the single rows for retrieval and upda

  • Set interval problem

    I'm trying to generate an instance of a logo every two seconds and have them remain persistent. This code creates a new instance every two seconds but the earlier versions are deleted. Any ideas of how to do this would be helpful. function createLogo

  • Report Distribution

    Can anyone point me to any documentation on how to set up reporting agent reports to automatically be sent to a central file system? Can someone share their experience with their client regarding reporting distribution? Appreciate your help!