Computer shuts off after Nvidia 8600M GT drivers installed

Hello, I recently used the Toshiba Recovery to start anew (out-of-the-box state) on my Satellite X205-SLi4.  The problem is, after the Nvidia drivers (for dual Nvidia 8600M GT) were installed and I rebooted, the computer turns off during startup.  I tried several times to restart, but the same thing happens.  The ONLY way that my computer will run in normal mode is to run with the standard vga driver that was present befor the Nvidia drivers were installed.
Is there a fix for this?  Any help would be appreciated!  Thanks in advance.
I'm running Vista Ultimate 32-bit.
This is what I found in the Event Viewer:
Error 8/28/2009 6:12:10 AM Service Control Manager 7000 None "The Parallel port driver service failed to start due to the following error: 
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
Error 8/28/2009 6:11:50 AM WerSvc 5007 None The target file for the Windows Feedback Platform (a DLL file containing the list of problems on this computer that require additional data collection for diagnosis) could not be parsed. The error code was 8014FFF9.
Warning 8/28/2009 6:11:36 AM WMServer 317 (4) "The description for Event ID 317 from source WMServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
C:\Users\Mia\AppData\Local\Microsoft\Windows Media\11.0\WMSDKNS.XML
An invalid character was found in text content.
0
0
C:\Users\Mia\AppData\Local\Microsoft\Windows Media\11.0\WMSDKNS.XML.(2009.08.28 06.11.36)
Warning 8/28/2009 6:09:37 AM Microsoft-Windows-WLAN-AutoConfig 4001 None "WLAN AutoConfig service has successfully stopped.
Warning 8/28/2009 6:09:36 AM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Warning 8/28/2009 6:09:36 AM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Error 8/28/2009 6:04:52 AM Microsoft-Windows-DistributedCOM 10005 None "DCOM got error ""1084"" attempting to start the service McNASvc with arguments """" in order to run the server:
{24F616A1-B755-4053-8018-C3425DC8B68A}"
Error 8/28/2009 6:01:00 AM Microsoft-Windows-DistributedCOM 10005 None "DCOM got error ""1084"" attempting to start the service WSearch with arguments """" in order to run the server:
{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}"
Error 8/28/2009 6:00:59 AM Microsoft-Windows-DistributedCOM 10005 None "DCOM got error ""1068"" attempting to start the service fdPHost with arguments """" in order to run the server:
{145B4335-FE2A-4927-A040-7C35AD3180EF}"
Error 8/28/2009 6:00:58 AM Microsoft-Windows-DistributedCOM 10005 None "DCOM got error ""1084"" attempting to start the service EventSystem with arguments """" in order to run the server:
{1BE1F766-5536-11D1-B726-00C04FB926AF}"
Error 8/28/2009 6:00:58 AM Microsoft-Windows-EventSystem 4609 Event System The COM+ Event System detected a bad return code during its internal processing.  HRESULT was 8007043c from line 45 of d:\vistartm\com\complus\src\events\tier1\eventsystemobj.cpp.  Please contact Microsoft Product Support Services to report this error.
Error 8/28/2009 6:00:50 AM Microsoft-Windows-DistributedCOM 10005 None "DCOM got error ""1084"" attempting to start the service ShellHWDetection with arguments """" in order to run the server:
{DD522ACC-F821-461A-A407-50B198B896DC}"
Error 8/28/2009 6:00:26 AM Microsoft-Windows-WLAN-AutoConfig 10000 None "WLAN Extensibility Module has failed to start.
Module Path: C:\Windows\System32\IWMSSvc.dll
Error Code: 21
Warning 8/28/2009 6:00:23 AM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Error 8/28/2009 6:00:04 AM Microsoft-Windows-Eventlog 1101 Event processing Audit events have been dropped by the transport.  The real time backup file was corrupt due to improper shutdown.
Warning 8/28/2009 6:00:04 AM PlugPlayManager 263 None The service 'TabletInputService' may not have unregistered for device event notifications before it was stopped.
Error 8/28/2009 6:00:04 AM EventLog 6008 None The previous system shutdown at 5:58:12 AM on 8/28/2009 was unexpected.
Error 8/28/2009 5:54:45 AM Service Control Manager 7000 None "The Parallel port driver service failed to start due to the following error: 
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
Error 8/28/2009 5:54:39 AM WerSvc 5007 None The target file for the Windows Feedback Platform (a DLL file containing the list of problems on this computer that require additional data collection for diagnosis) could not be parsed. The error code was 8014FFF9.
Solved!
Go to Solution.

Do you still think this is hardware related?
I do, Mia. Restoring the hard disk to its factory-new contents should result in an error-free installation, with all drivers working properly.
It's the way tech-support people verify that the hardware is okay.
"Event Viewer cannot open the event log or custom view.  Verify that Event log service is running. The data is invalid (13)."
See this Microsoft article.
   Error message when you use Event Viewer to open an event log on a Windows Vista or a Windows Server ... 
-Jerry

Similar Messages

  • Computer shuts off when win2k boots up

    antec pp-352x 350w psu
    MSI k7t266 pro2 mobo
    athlon xp 1800 oem
    512 mb pc 2100 ddr
    geforce4 ti4400 128mb
    western digital 60gb 7200
    the mobo and cpu is new.  everything else was pulled from my last system.
    Everything is connected properly, bios recognizes all components, system boots as normal.  However, when win2k starts up (you see the window screen and the bottom says starting up), the computer powers down.
    Also when I try to set the fsb at 133mhz and reboot, the computer shuts off after two seconds.  I have to reset cmos and set fsb at 100mhz for it to even boot.
    I've fiddled with the settings and no matter what I do,  the computer shuts off.   Wink2k is a previous install, so maybe it doesn't like the new mobo?   I've tried  two different psu, same results.  I've tested the memory and video card with my work computer, and got no problems.  CPU temperature is only 38 degrees celsius (I'm using a coolmaster heatsink rated up to xp1900)
    WHY does my computer turn off at the exact same time every time I power my computer!!?!?!?!?!

    the cooler base has a raised bit in it,a step were it goes up
    this is designed to give clearance over the top of the cpu socket which sticks up higher than the rest of it
    put it the wrong way round and the cooler never sits properley on the cpu core
    the fixing clip is in most cases on the step side of the cooler,so if its pointing down into the board you have put it the wrong way round

  • Whenever I play a game that requires flash my computer shuts off..

    Hi guys, I am new to this forum and I am hoping I can get some answers. I am pretty Tech savvy and I've tried everything I can think of to fix this problem.
    First I will give my system specs.
    Mobo: Asus m4n68t-m V2
    CPU: Athlon II X4 640 @ 3.0ghz
    RAM: OCZ 1333mhz 6gb
    Video: Galaxy - Geforce 8400GS
    PSU: 500watt Diablotec
    OS: Windows 7 Professional 64-bit
    My problem occurs when I try to run any Adobe Flash based games or videos. I can get anywhere from 2 seconds to 20 minutes but it will ultimately shut my computer off, as if I had unplugged it. I get no error or warning before it happens and the only thing I can get from the "event viewer" in the administrative tools is a Critical error - Source: Kernel-Power, ID 41.
    I have noticed that other people have had this problem but I have found no results as far as a remedy to the problem.
    I have been monitoring my cpu temperatures and at idle I am running at about 40 degrees Celsius. The temperature does not go above 45 Degrees when I run a flash program, so I have ruled out the possibility of overheating. I have also done troubleshooting with my power supply to rule out the possibility of too much power consumption.
    It seems to be a compatibility issue, but I don't know what with.
    I have a seagate 1Tb drive that I use for backing up all my files.  I was told it may have been corrupted and to unhook it and do a fresh install of windows.  I did this morning.  After the installation was done, I downloaded flash player 10 and tried to log on to facebook and play fishville.  NO new drivers were installed and the computer shut off immediately when I tried to run "Fishville".
    Its not the browser either.  I have tried it on IE8, IE9 beta, Google Chrome and Firefox.  Same result with every single browser and every single Flash based game or video.
    My last resort is to take a hammer to the computer and send the parts back to Micro-Center where I bought them.. twice.  I thought maybe I had gotten a bad piece of hardware so I took all of it back and exchanged for new parts.
    PLEASE HELP ME!

    Update:
    I have since gotten rid of the Asus Motherboard and the OCZ Memory.  I swapped them out for a Biostar motherboard with an Ati chipset and PNY DDR3 1333Mhz memroy.
    I was quite confident that the motherboard was causing all of my problems, mainly due to the fact that i have another computer in my house that is running a quad-core intel core 2 duo with an intel chipset and I don't have this problem at all on my other system.
    After I did the swap I made sure to install all of the latest drivers and after everything was complete I logged on to facebook and i was able to play Fishville with no problems.  BUT, as soon as I loaded Cafe' World my computer instantly shut off.
    I have been monitoring my temperature with the pc probe that came with my motherboard and my core temps NEVER go above 48 degrees Celcius.
    I know for a fact that this isn't a heating issue.  Something is not right and I wish someone here at adobe could try to point me in the right direction, take the time to look at what all I have tried and give me a creative point of view on this.
    The only thing that is not new in this machine is the hard drive.. and I know that isn't the problem because I tried a new hard drive already and it didn't fix it.  So I took it back, as I didn't need it.  There has to be a compatability issue with adobe flash player and some component in my system somewhere.. Its making me crazy.
    I have never come accross a problem on a computer that I couldn't fix and this is the first time I have ever had to ask for help and I don't feel like I am getting any help whatsoever from Adobe.
    At least Microsoft stayed on the phone with me for 2+ hours and TRIED to help me resolve this issue... to no avail.

  • Final Cut Pro Randomly Shutting off after Minutes

    Every time I open FCPX and begin editing it randomly shuts off after about 3-4 minutes. Regardless of what I am doing. I get no wheel or anything, it just shuts off clean. I am running the most recent update to Lion, FCPX 10.1 with 8GB of ram... this is really frustrating. Any thoughts?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • Computer shuts down after connecting i-pod

    my computer shuts down after i connect my i-pod nano new gen.
    also tried to connect before computer is on but then my comp shuts down at login page.
    after a few tries the computer stays on . but if i disconnect and connect again computer again shuts down.
    i reinstalled drivers but nothing seems to work.
    also when i manualy start i-tunes and then connect the i-pod the comp also shuts down.\
    anyone a idea?
    thnx in advance

    Are you getting any sort of blue screen before the PC reboots? If so, what numerical and text codes are you getting with it? (ie 0x\[zeros/letters/numbers] CAPSANDUNDERSCORES)
    If the blue screen mentions a specific file (for example, “ati3duag.dll”), let us know what that is called too. (Exact spelling, please.)
    Here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    If you're not seeing a blue screen (or if you’re just seeing a flash of a blue screen before the PC reboots), we can use the following technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
    With those settings in place, does a blue screen appear before the PC reboots?

  • Computer shuts down after exporting H.264 from mts file

    My computer shuts down after trying to export a H.264 file from a .mts file. I did this with no problems a few days ago, twice! This time line is longer, about 6.5 minutes. I have a I 5 processor, a gtx 660 graphics card and 8 megs of ram. I exported audio as a wave file and added those to the timeline. In the events panel, I get a message: "file importer detected an inconsistency in the file structure of audience_end_short.wav. Reading and writing this files metadata (xmp) has been disabled". it said the same for another short bit of audio, .wav file. I thought maybe there was a over heating issue, but to no avail. Do I need to get an I 7 processor? Please help!

    sorry about the spelling! Still going. About the driver issue. I was updating Geo Force drivers and my friend said to revert to the original install, which I did a while ago. That helped, but obviously didn't cure it. Wonder if I should do the same for windows updates. So although I'm still rendering after 2 hours, perhaps the new user acount will get me through this. So strange that I was able to render/export the exact files the other day. Like I said, this mts clip is longer by a minute. Plus, I got rid of the wav files that had a meta data issue. Thanks for helping me everyone. I'll keep you posted. But I do believe an I 7 processor will at least help in the speed department  right?

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • My MacBook Pro starts and shuts off after loading for sometime

    My MacBook Pro starts and shuts off after loading for sometime

    Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
    If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

  • Computer shuts down after inactivity.  Unable to revive.

    Computer shuts down after few minutes of inactivity. Fans comes on and power light goes off. Unable to revive unless I "pull the plug" then do a normal reboot. This is something new started approx 3 months ago. I have toyed with the Energy Saver Preference, but only with the scheduling.

    What iMac model is this? If it is an early iMac G5, it may be this issue:
    http://www.apple.com/support/imac/repairextensionprogram/
    If you have a third party USB device hooked up when your machine goes asleep (into Energy Saver), it may affect the ability of the machine to wake up since USB goes into low power mode, and the two will be confused how to handle the wake up.
    If it is an iMac that is over 4 years old, then it may need a new clock battery.
    Check for dust in the power port and power cable.

  • Lenovo c200 3000, shuts off after 2, 3 min

    Hi there
    I have lenovo 3000 c200, it is 5 years old
    It shuts off after 2 to 5 min. First i thought it is from the fan and i changed it, but still the same. Then I reapplied the thermall paste and still no difference. The fan starts and stops for like 2 to 3 seconds. And then it shuts of. I ran out of ideas.
    I use windows XP service pack 3, I tried to reinstall it or recovery it, but it just shuts down. it also does not recognize the battery and does not charge it.
    The S/N is L3-EY486.
    Thanks in advance
    Ned

    my personal opinion, it's better to buy new computer instead of replacing the parts ( battery & fan )

  • Downloading From Itunes Stores Won't Resume If Computer Shuts Off!!

    Not a happy girl here! I purchased quite a few things from the Itunes Store, and while they were downloading, my computer shut off.
    My question is after you've checked the authorization box in good faith for the charge to go through, why doesn't Itunes continue downloading your purchases when my computer comes back on again? In every other type of situation you're asked "were you in the middle of something, and would you like to continue?" Not so in this instant, and that's just not cool.
    Furthermore I checked my account and the charges are still pending. I'm wondering how that can be if the download didn't even go through? Am I still going to be charged for all of those purchases, or will the charges drop off? Because I authorized the charge, does it just blindly go through, and not even try to restart the download if the computer shuts off? Please....please tell me this isn't the way it's going to be with Itunes. Thanks...groan
    Sweetsoftgirl.....pouting
    mac ox   Mac OS X (10.4.10)  

    Look under the Store menu in iTunes for the "Check for purchases" command and run that. You may find the tracks there to be downloaded.
    If not, contact the iTunes Store using the form at the bottom of the Download FAQ web page and explain the problem to them.
    Good luck.

  • Need help fixing video shut off after 2 minutes in non-windows mode

    Good morning experts in this forum,  I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it.  I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode.  This includes BIOs mode and recovery mode.  There is no problem if the computer logs on Windows within 2 minutes.  But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it.  It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs.   But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer).  Now the computer is out of warrenty and I could not find any similar case using Google search.  I really appreaciate your help. Thanks

    I had the same problem when I upgraded.  In my case it definitely was the power supply.  In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived.  Swapped in a 430W to test and everything was perfect.  At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

  • My computer shuts off suddenly w/o warning

    Hi - I recently upgraded my older white Mac to Lion system and a week or so ago put in a new battery. The instructions for the battery were to put the energy saver/sleep on "never" until the battery completely ran down the first time. After the computer shut off suddenly without the usual "your battery is low" warning, I remembered to put it back on energy saver mode but it's still shutting off w/o warning if I don't keep an eye on it and plug it in before it dies. Any ideas what might be causing this?

    Hi Sharusz,
    If you are having unusual power/battery issues that are leading to sudden unannounced shutdowns, you may want to try resetting the System Management Controller (SMC). You may find the following article helpful:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to try re-calibrating the battery again, just in case the charge status is being misreported to the computer:
    OS X Lion: Calibrate the battery in a portable computer
    http://support.apple.com/kb/PH4230
    Regards,
    - Brenden

  • Computer shuts off intermittently

    Computer shuts off intermittently.
    Examples:
    1. you can be playing games pre-installed from factory or
    2. you can be online doing research, etc.
    When the pc first started shutting off, you used to be able to press the button on top of the tower and it come back on, but with it still doing it after months of shutting off; you now have to shut off the surge protector and turn it back on, before you can press the button on the pc tower - to turn back on.
    Is this a power supply going bad? or something else.
    Thank you for any information found and given.

    Temporarily remove the surge protector from the system, then try your system.  With that done, use this PSU diagnosis.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Computer shuts off during importing music

    my computer keeps shuting off while importing music i shuts off after track 9 it didnt do this before it started doing it since saturday and now every time im importing some music its shuts off after track 9 can anyone help me will appreciate the help im using itunes 6

    interesting im not the only one its very frustrating just last week i was able to import full cds with no problem until this past saturday i was importing some songs went to the bathroom and when i got out my computer was off i was like hmmm one tuesday i tried again and i taped it and when its done with track 9 it just shuts off i get no error message or nothing hope someone can help

Maybe you are looking for

  • IPhoto (13th Nov '12) on Mountain Lion 10.8.2

    Hi there, I had been working with the version of iPhoto that was originally installed on my late 2008 MacBook for quite some time before I decided to upgrade this week. I've installed the newest version from the app store, but now when I click on iPh

  • Communication chaneel error

    Hi Experts, My scenario is FileRFCFile Syncrinous. All the files being picked up from output tray by the Sender file CC. and because of one error file suddenly Sender File CC is not picking remaining all the files in the tray. even after deleting the

  • TV on the mini?

    long story short, recently me and my dad re-routed the cables for our TV (we use atena) and we live an house where cable outputs arnt built into the walls, so we run most of our cables under the house or carpet. in order for me to get out of the idea

  • Saving a stream in iTunes 7

    I have opened a stream in iTunes of a radio station that I frequent. I went to Advanced -> Open Stream and pasted in the MP3 url provided by the radio station. The station plays fine but I can not figure out how to save the station anywhere. Any idea

  • Mac re-orientation

    My first two machines were PowerBooks, but I've spent the last several years in Windoze-land. Any suggestions for useful books, etc., to help me re-acclimate to Mac World? I should mention that my last Mac OS was 7.5. Thanks, Michael