Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

Similar Messages

  • I need to reinstall Mail 5.0 where do I find the software?

    I need to reinstall Mail 5.0 for Lion.  Where can I find the software?

    You can download CS5.5 here: Download and Installation Help at the bottom.
    Personally, I would use the cleaner tool re-installation steps here: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Keep in mind, CS5.5 was made quite a while before OS10.10, if you do get it running, there's no guarantee that a program that old will function correctly in an OS that new.

  • Cant install device driver software, install device driver software

    have recently updated my ipad to iOs 5 and now all i have is the 'connect to iTunes' page even when i have connected
    it. my windows computer then tries to install device driver software but it canno be located .... really stuck and help would
    be great ..

    Sounds like your i tunes set up on the windows machine is messed up.  Suggest you reinstall itunes again.   Drivers etc should be in the package.   A fair number of windows folks have firewall related time out issues, so turn the firewall off along with your antivirus when you do the i tunes download.

  • Installing device driver every time I turn on the computer

    Every time I turn on my computer or plug in my iPhone 3G, I get the little icon and popup for "Installing Device Driver" and after a couple of minutes it says it installed successfully and then starts installing itself all over again. It's irritating as heck. I'm on Windows Vista and iTunes version 9.1.1.12. I updated Windows and updated iTunes and neither helped. This just started happening within the last week. My computer only has one USB drive and it's the one I've always used. Please help!

    It sounds as if you have more than one thing going on here. You say that when you turn on your computer you are getting an icon about installing device driver. Then you say it happens "or plug in my iPhone 3G". These should be two different issues.
    Let's isolate the first one. When you turn the computer on, you are getting a device driver popup. This occurs every time you turn on the computer? Are you running it in an administrator mode? What kind of external devices do you have connected to the computer? What USB devices do you have connected, i.e. printer, external drives (not flash drives)?
    After that, we can tackle the iPhone issue.

  • Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the

    Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the software on a second computer. But I also read lately that I will only be allowed to work with one computer. I want to work on both of my computers without de/installing and de/activating the software every time. Is this possible? Thank you!!

    You should be able to install the products on two computers as long as they are not running at same. Also the platform should be MAC.
    You may download the product from
    Download CS6 products

  • When i open windows,a notification appears saying "installing device drive software" , later "device drive software was not successfully installed".What to do!

    When i open windows,a notification appears saying "installing device drive software" , later "device drive software was not successfully installed".

    This has nothing to do with Mozilla Firefox. Device drivers are with usb drivers most of the time.

  • Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

    hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

    If your computer is running an OS X prior to Snow Leopard 10.6,
    the answer (if it is an Intel-based Mac; not old PowerPC model)
    would be to buy the retail Snow Leopard 10.6 DVD from Apple
    for about $20, and install it. Then update that to 10.6.8 by using
    the installed Snow Leopard online to get Combo Update v1.1 for
    Snow Leopard 10.6.8. After that is installed & updated, run the
    system's Software Update again, to see what else is available to
    that system.
    Later systems can then be looked into at Mac App Store, once
    the computer is running Snow Leopard 10.6.8.
    And if your computer is a Power PC (G4/G5, etc) and has no
    Core2Duo kind of CPU -- See "About this Mac" in apple menu
    to disclose the general info about your Mac. Also you can see
    even more by clicking on "More Info" when looking in there...
    If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
    Hopefully this helps.
    Good luck & happy computing!

  • Unable to install Device CALs on Windows Server 2012 after OS Reinstall

    Due to a hardware fault we had to reinstall Windows Server 2012. I have activated the Terminal Services licensing Server but I am unable to install Device CALs that we have purchased.
    The error is as follows:
    "Remote Desktop Services Licensing is unable to process your request. Make sure you provided correct information. If the problem persists, try other methods of activation. Error code is 800"
    I tried contacting technical support over phone - they are also unable to resolve the issue.

    Hi, thanks for response.
    I contacted Clearing House over phone and provided them with all the details regarding authorization
    number(s), license number(s) et al. However they also mentioned that there is some technical error from their "tool" and directed me to Technet Forum.
    I shall try the Hotfix

  • My pc wont install driver for iphone 3gs

    i plug it into my pc, it says installing device driver software. after a few seconds it says device driver not installed successfully

    Uninstall and reinstall iTunes

  • Trying to upgrade to 7.7, unable to install to drive F

    I am trying to upgrade to 7.7 and the download comes in but the install fails saying "unable to install to drive F". How do I change this as my current itunes is on drive c. No drive F is available.

    Hello FlaOne,
    Welcome to the HP Forums.
    I see that you have downgraded the operating system back to Windows 7.
    So I can better assist you, please respond with your printers Model Number:
    How Do I Find My Model Number?
    Once I have the printer model number, I can then research the issue and attempt to find suitable troubleshooting steps.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

    Hi,
    I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
    Anyone else had problems or success with this?
    Thanks in advance.

    9thdoc wrote:
    I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
    Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
    You need the Snow Leopard installation disk or a replacement for it.

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • Can I download the instrument Control and Data Aquisition Device Driver CD for 7.1?

    Greetings,
    Can I download the instrument Control and Data Aquisition Device Driver CD for 7.1?
    I'm trying to find out if I can download
    the instrument Control and Data Aquisition Device Driver CD for 7.1. Instead of downloading all the upgrades?
    Is there a link to the image file for this CD?
    TIA

    Sam,
    Unfortunately, the Device Driver CD is not available for download. However, your Technical Sales Representative should be able to send it to you (Contact Information).
    Spencer S.

  • HT201401 keeps trying to install device driver each time i plug in the iphone

    keeps trying to install device driver each time i plug in the iphone

    I guess there's a missing device driver in your OS.

  • My register software for lightroom5 got erased when Dell repaired the computer. is there a way to re

    my register software for lightroom5 got erased when Dell repaired the computer. is there a way to redownload?

    Yes, you can download from http://www.adobe.com/support/downloads/detail.jsp?ftpID=574
    You'll need your serial number - you'll find it in your Adobe account if you ordered direct from Adobe or registered your software.

Maybe you are looking for

  • Create user in ADAM instance with powershell

    Hi I was wondering if you could help me with the ability to create a user in AD / Adam? I am trying to write the powershell code to create users for Teradata connectivity. the manual process is to use adsiedit and create the users through groupof nam

  • Thumbnails present but not populated with photo's

    Help! Both the Events and Photo thumbnail boxes are all present but they don't include the photo's. When I open events all the photo boxes are visible - but empty. Trying to open a photo results in a "!" indicator. Over 6,000 images at stake, any hel

  • XML transform exception

    Hi I am trying to transform a shopping cart to display from an XSL. But I get the following exception javax.xml.transform.TransformerException: Content is not allowed in prolog. Transformer transformer = tFactory.newTransformer(new StreamSource(xslPa

  • Do I need Digital

    Hi folks,???just a quick question but do I need digital I/O for a Creative Xtrememusic card?I want to run a digitial connection from my sound card to my receiver, Sony STR-DA3200ES. I had tried to use a optical TOSLINK cable with a 3.5mm jack on the

  • Checking in a content programatically

    Hi, Has anyone successfully checked-in a content item programatically? If yes, can you please share the code snippet. I tried using CHECKIN_NEW (CHECKIN_SEL for update) and CHECKIN_UNIVERSAL services to check-in the item programatically. I am getting