Conant selection of a calculated KF

I have a big problem - need help! When I check the box for "Constant selection" for one of my calculated KF's I cant execute the query, I get following error message;
"The property 'Display Not Accounted Values' is not allowed here"
and the explenation text:
"<i>Diagnosis
The property Constant Selection is active for element 1.. The characteristic 0INFOPROV is, however selected in 1. and the properties Constant Selection and Display Non Accounted Values are active in 0INFOPROV. This combination of settings cannot be processed.
System response
Procedure
Check and change the structure element definition Last invoice price/unit (Order Curr).
Procedure for System Administration
Notification Number BRAIN 084</i>"
Anyone had this problem?
Best Regards
/Daniel

Hi Prakash,
I have set the Update Type as Overwrite as I am using an ODS.
2nd point is I have the Posting Date and Document Dates based on Movement Type for a particular order. I am having 2 KFs in this report. One is Quantity and another is No of Days. So how to avoid the No of Days being added against the quantity values???

Similar Messages

Cannot select fields for calculating other fields~

Help -- I am tryiing to get certain fiels in a form to calculate based on selection of other fields. The fields to be selected already have values in them. (The same format I have used for several years, just new set of forms)
I get through the point of setting up the field properties to calculate and I select Sum of... Then it simply will not let me select any fields to use for calculations -- unless I select all fields.
Please -- this is time sensitive and urgent any help responses needed and welcome!

Sounds like you are having issues with Acrobat and not FormsCentral. You would get a better help if you post your question on the Acrobat's forum
http://forums.adobe.com/community/acrobat/forms
Gen

Selection on Global Calculated Key Figure problem

Hi all,
I've got a Calculated key figure, made up of 2 key figures and 2 restricted key figures, saved to a homogenous multiprovider (Customer Sales). this works fine as is.
However, when you create a selection in BEx QD, that limits the CKF further by Distribution channel, and view the result, the result seems to be multiplied by a value to the effect of 2.8???
If you view the CKF by itself its fine (though not limited to what it needs to be).
As an example.
Say sales for a distribution channel was 1 million dollars. Sales overall was 2 million dollars. If i drag in my CKF (and have NO characteristics), it comes up with 2 million dollars.
If i limit it to 1 sales office, no issues, I get that sales office's value. However, if i limit it to a distribution channel, i get roughly 2.8 million dollars.
Any ideas? I can't see the logic in this. Perhaps someone knows of the issue/has seen a note or something regarding this, cos its got me scratchin my head?
Cheers

Hi Pierre,
I appreciate the fast reply. This thing is driving me nuts!
Ok so when you refer to the CKF are you referring to the global CKF on the multiprovider or the CKF i have on the report that is restricted (basically a local RKF)?
I've had a look through there and have found the calculation tab, but can't really say i've found "Calculate according to current formula".
What i see are:
a dropdown list headed "calculate results as..." (nothing defined)
another dropdown list called "calculate Single Values as..." (nothing defined)
a tick box called cumulated (unticked)
another tickbox called "also apply to results" (unticked)
another dropdown listbox called "calculation direction" (default setting)
Underneath all that is a tickbox called "use precalculated value" (unticked).
is it something under all that that i need to change?
Do i change the global CKF or the local RKF?
Thanks for the assist.

Error on selecting member in calculation manager

I get the error when I want to select a member in a formula in Calculation Manager.

What is the error that you could see?
Regards,
Cnee

Pros and Cons selecting Ext to file Catalog

I am in a quandry. I bought LR 1. and never had the chance to put anytime to learn how to use it.
I am starting a new, so just got LR 2.2, and would like to do it the most practical and best way. I use an iMac 10.5, with 350 GB int HD, and have 3 Ext HD's ranging from 350 - 1 TB.
I only use my int HD just to run apps, everything else I placed them on my Ext HD.
So my questions is "What are the Pros and Cons placing LR Catalog in an Ext HD?

>So my questions is "What are the Pros and Cons placing LR Catalog in an Ext HD?
Since this is a fixed station there are none really except perhaps speed depending on how you connect to it. USB 2 is the slowest solution, followed by firewire 400 then firewire 800 and fastest is eSATA, but I doubt your iMac supports that.

Cannot select fields for calculation

It will only allow me to select all the fields or deselect all the fields. When I try to click on a specific field, it highlights the field in blue but will not checkmark it.

Found the solution:
Hi,
Solution Remove Adobe PDF from the Disabled Items list in the Microsoft Office application. To manage your Disabled Items list in a Microsoft Office application:
Open the Microsoft Office application (Word, Excel, Publisher).
Choose Help > About [the application name].
Click Disabled Items.
Select Adobe PDF from the list, and then click Enable.
Quit the Microsoft Office application, and then restart it.
View an Adobe Captivate demo of this procedure
If the error message continues to appear after you enable Adobe PDF, then check the security level for macros in Word:
Choose Tools > Macro > Security.
In the Security dialog, click the Security tab.
Choose Medium or High.
Do one of the following:
If you chose Medium, then click OK.
If you chose High, then continue with steps 5 through 7.
Click the Trusted Publishers tab.
Check Trust all installed add-ins and templates.
Click OK.
PDFMaker and the right-click context menu should function again.
View an Adobe Captivate demo of this procedure
http://kb.adobe.com/selfservice/viewContent.do?externalId=329044
Thanks
proton

Determine selected UOM on calculated extended attribute

When calculating results based on values with different units of measure (UOM), how do I know the unit of measure that is set on a calculated numeric extended attribute? For example, getting the target values in inches, if I calculate volume as length * width * height will produce a value in cubic inches. If the extended attribute UOM is set to cubic feet, then I must covert the returned results from cubic inches to cubic feet. The question is, can I determine the unit of measure for the calculated numeric extended attribute within the calculation script so that I can calculate the value in the correct UOM, or must I use a custom calculation class?

The Calculated EA can only have one specified UOM, meaning if your calculated EA is Volume, you configure it with one specific UOM (eg, cubic feet). Therefore, your JScript can request EA values of the length, width, and height to be returned in the UOM you need (feet)
var length @ GetCellInMyRowByColumnID('LENGTH').Value.GetNumericValue ('FT');
var height @ GetCellInMyRowByColumnID('HEIGHT').Value.GetNumericValue ('FT');
var width @ GetCellInMyRowByColumnID('WIDTH').Value.GetNumericValue ('FT');

Calculated key figures Vs local formula

HI,
I am having 4 queries on a cube.
i am now using calculated key figures instead of local formulae.
I want to know "which is better in performance wise/ or may be pros and cons of using each one."
Can any one clarify me.
I know that
1.when we select the option Calculation after aggregation will improve performance.
2.we can do some more things only with Cal. Key Figs using formula variable.
Here my concern is not that.
I am concerned about general case like -
i have to add, multiply or divide some direct key figures and use some data functions like nodim, NDIV0 functions.
Thanks in advance.
Regards,
Raghu

Hi Raghu,
Formulas cannot be directly reused, but if they are saved to a global structure, then the structure may be reused. If you are creating a calculation that will be widely used, it is best to create it as global...this helps a lot when you need to revisit the definition, and make changes as one chnage is reflected in all queries.
However, there are some functions like SUMCT, SUMGT, SUMRT, %CT, %GT, %RT which are available only to the formulas (local), so if you need to use them, you cannot use a CKF.
In addition to the differences, A formula can only work on other formulas/selections already in your query (in the same structure as your new formula), while a calculated key figure can only work on other key figures, calculated key figures or restricted key figures. However both can use formula variables.
CKF are calculated at the time of loading data.
Your Formula calculates at the time of running the query.
Hope this helps...
Regards,
Yokesh.

Calculation of Fringe Benefit Tax in SAP

Dear all,
I want information about the fringe benefit tax (FBT). How can we configure it in SAP. Is there any standards available? any information on FBT is highly appreciable.
Thanks,

Dear Madhusudhan,
Maintain separate GL for FBT related acounts.
Maintain key word in GL Master.
So only those GLs will be selected for FBT calculation.
Thereafter you can execute reports like F.01 based on keywords to identify values in such accounts. Just apply the rates as per FBT rules and make a provision.
Assign points if useful

Measure to count of rows in a calculation part of cube

Hi All,
Is it possible to create measure which shows me number of rows in a fact table?
I'd like to create it using mdx syntax (in a query using WITH MEMBER [Measures].[Count]). Unfortunately, I can't modify cube definition, so I have to use mdx syntax in a query...

Hi,
In your Visual Studio project locate the target fact table in data source view (DSV file) and create a "Named Calculation" (Right-click the target fact table on DSV and select "New Named Calculation..." option) and hard-code 1 in the
expression dialogue. Then use the newly created column name along with the Sum function to create a cube level measure.
Here is a screenshot.
Best regards,
Chandima

How to use a calculated column in the same query

Hi All,
I need some help with using a calculated column in the same query.
For eq
I am joining a couple of tables and some of the select columns are calculated based on the columns of the tables and i want a new column in the same query to use this calculated feild in some other calcualtion.
something like this...
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
Thanks

user548171 wrote:
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
ThanksWhat about just repeating the column values:
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( (12+3) / (12-3) * 100 > 0 ) THEN 'Yes' ELSE 'No' END FROM DUAL

Ship to party can not be found in freight order for cost calculation

Dear All,
Cost charge can not be calculated because of missing ship to part. Please help me about this problem
In my rate table, there are 3 combinations which are Product + Carier + Ship to party.and cost will be calculated according to weight. Also resolution base is selected product in calculation sheet.
When I press "calculate charges" button in fregiht order and have a look at charge anylysis log, product ID and Carier are found successfully, ship to part not. Erro message is "Calculation base SHIP_To_PARTY has [ ] on resoltion base product"
Also how can I add new scale base , is there any user exit or any documentation?
Regards,
Ali

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

ITEM INTEREST CALCULATION ON VENDOR AND CUSTOMER

Dear all,
how to calculate Item interest calculation on Vendors and customers
what is the configuration need? please let me know it is very needful for me
Thanks in advance.
Regards,
Ram.

in ob46 we maintain int calculation types under that u can maitain int indicatro name int calculation type(P)and save
after that u can prepare itme balance interest calculation(path spro/f/a/ap&ar/business transactions/int calculation/int calculation global settings/prepare item int calculation) here
u can enter int indicator select open itmes check box enter calander type etc.
define referance itn rates obac here u can enter ref int rate long text short text date from currency and save
define time dependent terms ob81 here u can enter int indicator currency effective from sequential number term(u can select item int calculation) ref address rate etc.
enter int values ob83 here u can enter reference int indicator from date and percentage save.
if u have any doubt let me know.

Cess on TDS is not calculating at the time of posting F-47

Dear All,
Cess on TDS is not calculating at the time of F-47 (vendor Down payment Requst)
Mean system is deducting TDS amount only, not deducting Cess amount on TDS . at the time invoice posting Cess & TDS calculating in this company code (1111)
But in other (2222) companycode,system calculating cess on TDS at the time F-47 . both company codes under the same system. if we apply perticular notes on above issue is there any affect to other (2222)company code settings ?
Plse give me advise urgant.
Raja

Hi
In the withholding tax settings Define Withholding Tax Type for Invoice Posting
and Define Withholding Tax Type for Payment Posting for CESS ,check whether you selected in <b>calculation part</b>: tax amount as base for calculation and selected inherit base.
If this is not done system will not calculate the Cess.
Regards
Aravind
Assign points if useful

Tax calculation in SC

Hi Experts ,
I have a problem, when i am creating shopping cart by using BBP_PD_SC_CREATE.In FM ,I have sent the all the header and table parameters then suceessfully created a shopiing cart.In table parameters tab(I_TAX) also sent the data (like TAX_CODE = V1).But the FM didin't calculate the tax.Is there any way to calculate tax.
How can I know the whether tax is calculated or not.Could you suggest me.Is there any settings needed.
I am following the below settings path:
SPRO->Supplier Relationship Management > Cross-Application Basic Settings > Tax Calculation > Determine System for Tax Calculation.
here, select the "Tax Calculation Occurs in Backend" radio button. But I didn't get the tax calculatation.
Thank You,
Anupama.

Hi!
You also need to perform the following steps in customizing (beneath Determine system for tax cal.):
- Enter Tax code (align tax codes with you backend system), you can also set a tax code default
- Assign EBP tax codes to FI system
brgs Ziggy

Conant selection of a calculated KF

Similar Messages

Maybe you are looking for