Concatenate multiple pdf files into one single postscript file

Hi,
Could anyone help me with a code to "Concatenate Multiple pdf files into one single postscript file" ?
Thanks for the help

Thanks for your reply! Actually the main purpose is to allow user to select multiple pdf documents on a single web page and then he should be able to print all of them at once by hitting the print button on the web page instead of selecting each document seperately to print it. Also he should be able to see all the printing services available to print those documents.
Thanks,

Similar Messages

  • How do I bind multiple PDF Documents into one single document?

    I am trying to bind multiple PDF documents into one single document can anyone please help me?

    You would need Adobe Acrobat to do that. Reader doesn't have the ability.

  • Help!!! I can't save multiple PDF documents into one single PDF!  Need answers!

    Hello!
    I'm trying to save a very large PDF file.  I'm using Adobe Acrobat X Pro.  There are about 200 plus pages and I'm trying to save merged PDF files as one single PDF document.  I've compressed the PDF's as much as I could prior to saving.  For some reason, the process of saving it as a single file takes a long time and usually doesn't work.  Will a higher version of Adobe be faster?  I was told that Adobe X is a 32 bit program and that could be why it's running slow.  I'm unfamiliar with how it all works so I'm hoping someone could offer a simple explanation as to why this is happening and a solution on how to make something as simple as saving a document, go faster.
    Thank you!
    c

    Best to keep the replies in the other post, but I wanted to comment on something you said "I was told that Adobe X is a 32 bit program and that could be why it's running slow." Yes, it's a 32 bit program. No, it's complete nonsense to say that 32 bit programs run slow. There seems to be a general belief that 64 bit is better because, well, because, um, because it's a bigger number so it must be, right? Sorry, I'm not mocking you, but there is such nonsense about this, that I think software makers are having to put a lot of effort into making 64 bit software for no good reason at all.

  • Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

    I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.  When I drag the doc in a line would show up in the past, and if I went above th eline all was good.  It doesn't have a line, and no matter what I try I am having no success.
    Please help!

    According to an Apple Support article, unless there are unforeseen issues
    in file ownership or permissions, the combining of .PDFs should be simple.
    •OS X: Combining PDF documents using Preview - Apple Support
    There are a few variable and similar methods, some change with version
    of OS X in use; some vintage OS X may vary a little in the process...
    A variety of similar topics appear in search results, with terms:
    " mac os x combine pdf into one " such as this page shows...
    https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
    If the system is older than Mavericks there may be other methods to try.
    Suggestions are among linked results in the search. I see a few fair ones.
    •Here's another that offers generally similar suggestions...*  this info looks OK, extra links, do not:
    http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
    { note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
    If you have a problem after trying other methods, based on an OS X
    your computer is running, post back with more exact information...
    Good luck & happy computing!
    edited

  • How do you merge multiple pdf's into one document?

    How do you merge multiple pdf's into one document?

    Hi pharmovative,
    You can use the Combine PDF feature of Adobe PDF pack to combine multiple PDF files into one document. (Or, if you have the full version of Acrobat, you an do it there as well by choosing Create > Combine Files into a Single PDF.)
    Please let us know if you need further assistance.
    Best,
    Sara

  • I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

    I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

    Pat:
    Below is a copy of an 8/7/2013 email from adobe. I prepaid a one-year subscription, and, until I recently upgraded to Windows 8, I was able to make several dozens of merged pdf documents. I seem to be no longer able to use the merge feature that I had successfully and repeated used. When I search for the merge feature I end up with a request that I pay for an upgrade monthly subscription to use the merge feature.
    Tom
    =================================here follows my subscription email====================================================
    Welcome to Adobe ExportPDF
    2 messages
    [email protected] <[email protected]>
    Wed, Aug 7, 2013 at 1:01 PM
    Reply-To: [email protected]
    To: [email protected]
    Dear Thomas Corr,
    Thank you for purchasing a subscription for Adobe ExportPDF.
    Sign-in to export a PDF Now >>
    With your subscription you can:
    Enjoy unlimited online conversions from PDF to Word (DOCX).
    Make scanned text editable.
    Maintain page, paragraph, and font attributes.
    Preserve tables, images, and multi-column text.
    Export PDF comments to Word.
    Help and feedback
    Get help from Adobe on the Support Center.
    The Adobe ExportPDF Team

  • Concatenate multiple pdf files into one single file

    hi,
    Could any one help me with a code "combining or merging multiple pdf files selected from the browser into one single document" to send it as one single request to the printer?
    Thanks ,

    It is called the Big Faceless PDF library.
    they have a free trial download.
    in regards to doing it yourself, of course.
    but this is a pure java library that can do what you want without you having to re-invent the wheel (for a price of course).
    they have excellent technical support as well, usually solving your problem within a day or so.

  • Combining multiple pdf pages into a single document

    I realize this is probably an inappropriate request -- probably? almost certainly -- for this forum, but perhaps someone can refer me to another source for a solution.
    I would like to combine several pages individually scanned to pdf format into a single pdf document. How do I do that? (I have only Adobe Reader. I do not have any applications for creating and editing pdf pages.)
    Hope you'll forgive the inappropriate request, and thanks to anyone who can refer me to a more appropriate source.
    Sincerely,
    Eric Weir

    I would like to combine several pages individually scanned to pdf format into a single pdf document. How do I do that?
    You already have the application installed -- Preview. Whether the source files are single page or multipage documents, whether they are all on size/orientation or come in multiple dimensions/orientations, simply ...
    1) Open each in a separate Preview window,
    2) Open the "sidebar" for each window,
    3) Drag one or more icon pages from any of the source Preview sidebar windows to your target Preview sidebar window,
    4) Arrange the order of the pages in the target sidebar window as desired, and
    5) Save resulting document under a new name using the "Save As..." File menu option.
    ADDED: Oops! Too slow. Someone else beat me to it...

  • How do I: put multiple PDF pictures into one PDF page?

    I have just installed Adobe Acrobat Pro Ver 9 - so this apllication and its associated SDK are the only applications available to me for use.
    Adobe Acrobat was chosen because of its AutoCAD capabilities (when AutoCAD is not present). i.e.  Using Acrobat & AutoCAD's plot configuration files & Pen / colour selection table ensures the output has correct line thicknesses (sometimes colours in CAD are used to represent a line's thickness) - this is preserved when using Acrobat.
    The generated output is fantastic. However, when I try to print the output via Excel / Word (used for layout) - my perfect output is reduced to imperfect results.
    So: is it possible to layout multiple PDF pictures inside one PDF entity for printing purposes such that the original output is not distorted?
    I have in the past put pages in front or behind other pages but cannot find any references or code that works with Pro 9 nor indeed the manual way to insert PDF pages at any location on a single PDF Page?
    I'll try and explain.  My template coud consist of 6 boxes on a single A4 page thus:
    My base PDF Page (can be thought of as a template - ideally it wont be printed - but even if it is - it wont be printed on any media material) has 6 areas (any number of areas up to 100) on it.  In each area, there is a box.  It is within these boxes that I wish to place a PDF Picture.  Not all pictures will be the same.  How can I do that?  Ideally I'd like some example C# code - though doing it as a user will suffice, for now.
    Is there a way of programmatically selecting each of the above boxes on the base PDF Document?
    I do know of one manual method (though it seems long winded) and it is not accurate enough in that (even though the layers are deselected) - the hidden layers are subsequently outputed too - not good!
    Uses a button icon over each box.
    All the current Adobe help for the SDK refers to Pro 8 and previously - which all seems to have now been replaced in Pro 9
    This question will be placed in the Developer & User Forums - as it pertains to both.
    Thankyou in advance for anyone that either knows any workarounds or any ways to affect a solution. 

    Picture of what I want to see:
    What I get, and don't want to see is:
    The PDF was generated using Adobe Acrobat Pro 9 from an AutoCAD LT (DWG) file without AutoCAD being present but making use of a plot configuration (PC3) file & pen table (CTB) file.  The resultant file [WhatIWantToSee.pdf] is perfect - all the lines are the right thickness & colour and are perfect vectors (with no construction / proofing layers visible).  When you view that file in Acrobat and show the "Layers" property box, you see that the correct number of layers whilst are still present are indeed turned off.
    However, when I add a forms-button to one of the rectangles (please refer to initial post - where there are 6 rectangles), and display same file as icon display.  The resultant view is the one shown above named [ What I get and don't want to see].  It seems the saved layer settings are all ignored?
    I generated the PDF file through Adobe Acrobat Pro 9  Menu | File | Create PDF | From File (Files of type Autodesk) | Options | Selected Layers | Layout | Last Active Layout.
    Rectangles are regular content elements - not fields (in the general meaning of form-fields).

  • Is it possible to combine multiple pdf's into one without saving them onto your computer?

    Hello
    I open pdf's in an application (no add ons for acrobat exist), and want to combine them without having to use time on saving them before merging them into one single document.
    Is it possible to do this without having the files saved onto your computer? I use acrobat x pro.

    I dont think you understand my question. Of course Adobe reader cant combine pdf's, if it could I would not have had to purchase Adobe acrobat.
    The problem I am trying to solve is how to combine pdf files when they are not opened/saved locally on my computer.
    If I make Acrobat the standard program for opening pdf files on my computer - then will it be possible to combine the files that are opened without saving them first?
    I dont have the program installed on my computer now, and have to know this before we purchase it.

  • Multiple po's into one single inbound delivery

    Hi Experts,
    How to create the Multiple purchase order line items (Ex; In one po i am selecting only 2 line items and one more po i am select 3 line items)  into one single inbound delivery for this where is the settings .
    please guide me any one.
    Thanks,
    KK

    Deshpande i have the same problem.
    I tired giving all the PO for a collective inbound delivery in VL34, but it still creates one delivey for every PO item
    Anand: did u manage to solve ur issue
    Regards
    Sumanth

  • Combine several pdf docs into one single pdf doc

    I need to combine several pdf's into one pdf. How can I do this?

    Or with non-Adobe programs that you may find by Googling...

  • Multiple Idocs (DEBMAS06) into one single file

    Hi All,
    Multiple Idocs(DEBMAS06) are sent from SAP in bulk to be sent to FTP server via XI...(Cannot use Append the file as The structure is with Header,Detail(all the idoc details) and Trailer)
    I have seen different threads which speaks about the same,
    But Please suggest me the best approach to proceed with this kind of scenario...
    Multiple IDocs -> XI -> Flat file which is speaking about BPM and also Packaging(SAP note 814393)
    and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b
    (How Tou2026 Send Multiple IDocs Within One XI Message)
    I prefer not to use BPM... but if required then....
    Please suggest me which is the best approach to proceed with it..
    Thanks and Regards,
    Sridhar Reddy

    Hi ,
    I had tried the scenario Multiple IDOC's coming from R/3 and send all of them into a Single File
    But it did not work...
    Of course i changed as Micahel mentioned in
    The specified item was not found.
    (Collect and make pack size to 50) but still the idocs are posting as 50 messages in XI and 50 files are being created ...
    But as per his remarks we need customization which is very difficult...
    And also i checked Michaels blog
    The specified item was not found.
    But this is dicussing reverse of my scenario...
    and finally i am thinking of going with the stefens weblog...
    Collecting IDocs without using BPM
    Can any one please suggest any other best way to handle this...
    Instead of going for BPM i am implementing as Stefen suggested ... This is because we have many such interfaces where SAP sends collective idocs....
    Regards,
    Sridhar Reddy
    Edited by: sridhar reddy kondam on Oct 22, 2008 6:20 AM

  • How do I consolidate multiple PDF pages into one iBook file ?

    I have a big test coming up, and I have 600 practice questions saves as PDF's on my iMac.  I tried downloading them through iTunes on my iPad, but it looks like they downloaded as 600 individual iBook files.  Needless to say, it will waste a lot of time opening up and closing each page.
    Is there a way to "consolidate" all 600 of these PDF files, so that they appear as one single iBook file?  I would really like to study by turning the page, instead of being forced to close each file and open a new one 600 times.
    Thanks!

    Good to know -- there is no file format "Adobe Acrobat Reader" and there is no application "Adobe Acrobat Reader".
    The file format PDF is what Acrobat can create and manipulate.
    (Acrobat is a "for pay" desktop application.)
    Adobe Reader ( a free to download, install and use application) can open and let one view PDF files.
    To combine PDF files you would use Acrobat.
    An alternative would be to subscribe to Adobe's online subscription service "PDF Pack".
    Be well...

  • How can you combine multiple PDF pages into one searchable PDF page?

    I have scanned multiple business cards and now have a PDF  file with over 500 pages (or cards). I would like to be able and create a  page with 8 cards to a page and is still searchable for text. Right now, the text is searchable. Basically have 63 pages and not 500.
    Example:
    If I wanted to find Joe Smith's card, I could search for  "Joe Smith" and it would search all of the text and bring me to the  page(s). Right now, it will bring me to that page. Is there a way to create  a page where I can have multiple cards and the text is still searchable?
    I tried to create a page in Photoshop, made 8 different layers with 8  different cards, but when saved, not only was the file way too large, but no text, or font, was detected  and there was nothing to  search for.
    Is there an option to create a page in Acrobat Professional and put 8 cards to a page?
    I have InDesign, Illustrator, Photoshop and Acrobat Professional Pro.
    Thanks,
    mr19th

    That sounds great, but I'm lost.
    I followed these steps:
    1) Open your PDF (in Adobe Acrobat Pro)
    2) Chose print
    The print/printer options pop-up will show.
    3) In the printer section, do not use your normal printer, a printer named Adobe PDF should be an option. Chose it.
    4) Under the "Page handling" section, change the Page Scaling drop-down menu to "Multiple pages per sheet".
    It works fine, but it looses all of the font information and the search no longer works. How can you do it and save the font info, so the search tool continues to operate.
    Am I missing anything?

Maybe you are looking for

  • Filling Data fields of a DSO in End Routine

    Hi Everyone, The data fields of a DSO contains 2 key figures and a characteristic. In the End routine of the transformation, i have assigned constant values for the infoobjects in the data field. After executing the DTP, if I check in the New Table o

  • Can Aperture store projects on an external drive?

    Is it possible to store my aperture projects on an external drive or must it reside on the Mac drive? I use an external USB drive to store all of my photos on and just cannot see using HD space for these photos. Is it possible?

  • Problem With Text Box

    Hi, All I created a normal frame by overriding method SetBoundingBox in CPathCreationTracker, then converted that frame to the text frame. In the BeginTracking method of the CPathCreationTracker, I activated text tool on double click event of Text fr

  • N8 Overexposed too bright pictures. Camera problem...

    Good day to all. I have a Nokia N8 and there is a problem with a camera. When taking photos in the dark or low light places, the camera is just wonderful, the pictures are great. But... In daylight/ bright light or even cloudy day the camera is takin

  • Satelite A200-1IW: Win 8 - ATI Radeon HD 2600 can't set 1920x1080 @60Hz

    Hi! I have a problem with my Toshiba Satelite A200-1IW and its resolution on VGA 22" monitor. I decided to switch win7 to win8 and got stuck on this annoying issue. I can't set 1920x1080 @60Hz on win8 even though there was no problem doing so in win7