Concurrent movement of two scorllpane

hai all,
i have two JTable table1 and table2 and add these in two JOption pane
pane1 and pane2 . My problem is while moving any of this pane next pane also move the same.
by tom

.... i have no more experience in programing world only one monthOK, but now its just common courtesy (you must be older than a month).
You offered 10 dukes to solve your (initial) problem, so award them to camickr
for his solution.
the dukes are not worth anything, but your actions could determine the
level of help you receive with your next problem.

Similar Messages

  • Concurrent movement of two scrollpane

    hai all,
    i have two scrollpane while moving the first one the second should move the corresopnding amount of movement in first , if the second one is moving that same action should happend in first one also
    by lolipop

    set the scrollpane's scrollbar models the same
    scrollpane2.getVerticalScrollBar().setModel(scrollpane1.getVerticalScrollBar().getModel());

  • Concurrent Employment in two comapny codes

    Hi,
    My client want that a particular population of employees should be active in two company codes. The currency is same for two company codes. Currency for two company codes is same. There is no SAP payroll system.I got the suggestion that it can be achieved thru concurrent employment. But I am not sure that whether we can achieve concurrent employment in two different company codes.
    Please suggest.

    Why dont you maintain IT27 for these employees, there you can specify the company code, cost centre and the %.

  • How to create QT movie with two subtitle streams

    What would be the best (and fast) way to create a QT movie (or mpeg-4) to convert the DVD project created in DVDSP with two subtitle streams?
    Both subtitle streams were created by importing TIFF files with the corresponding timing file. One stream is for the dialogue (Subtitle Track 1 non-forced) and the other stream is for the onscreen text translation (Sub Track 2 forced). There are times when the T/C of the two tracks overlap, as someone is talking while an onscreen text is displayed.
    Is it possible to create a QT movie or any other video format with both streams showing?
    Thank you for your help.

    I have discovered that I can merge two QT movies (Each movie with one stream of subtitles/TIFF files) by copying all tracks from one movie to the other. Now I have a QT movie with two subtitle streams. Each subtitle stream is in a video track as animation.
    Thank you for your help.

  • AS2 How to make a button that moves every two seconds

    How can I make a button that moves every two seconds by itself in ActionScript2?
    At the moment, I have to use the on(press) command, but what I really need is for the button to be able to move randomly by itself every two seconds. For example:
    (insert the code here) {
         bc1._x = random(250)
         bc1._y = random(250)
    Thanks!

    You can use the setInterval function to have a function repeated for specific time intervals.  Here is a link to a tutorial that explains how to use it...
    http://www.republicofcode.com/tutorials/flash/setinterval/

  • Editing Movies on two computers

    My friend and I are making a movie on imovie 11 but would like to know since both of us have macbook pros if it is possible to edit one movie on two computers?
    Thanks Kundun93

    No - there is no way
    You could devise a Keyword scheme to identify them
    You might send a note to the IPLM folks and suggest that they consider adding a feature to help or even do it
    Or you could suggest to Apple a smart album selection based on edit date which would help you
    LN

  • One movie purchase - two iPads

    We have two iPad minis in our household.  My husband purchased a movie and this downloaded to his iPad.  We share an Apple ID on both iPads.  Should I be able to download the purchased to my iPad also?  If I can, please would someone give me the instructions for doing this.  Thanks very much.

    Whether you can re-download it will depend upon what country that you are in (redownloading films isn't possible in all countries), and which film studio that it's from (not all allow redownloading). If you can redownload it then it will show in the Purchased tab in the iTunes store app on your iPad. If not then if your husband connects the iPad to the computer's iTunes that you sync to and does File > Devices > Transfer Purchases then that should copy it over to your computer and you can then sync it to your iPad

  • Synchronizing movement of two layers

    I have a feeling I'm using the hard way to accomplish something simple, so I hope someone here can straighten me out.
    What I'm doing is drawing an "indiana jones" type line over a moving 'map' layer (approx. 18" x 36") — moving generally left to right, but also some ups & downs. So, the line, as it's being drawn, and after it's drawn, has to move precisely in sync with the layer below.
    I have no problem creating the line. Been there, done that before. But, never tried syncing a line with another layer that's in motion. As I'm currently doing it, it's very time consuming.
    I tried a copy & paste of the keyframes from the 'map' layer to the line layer but that didn't work out too well. What I'm currently doing is manually keyframing the line about every 30 frames, but I'm thinking there has to be a faster/easier way to do this. So far I've keyframed about 1 minute, and have about 8 minutes & 12,000 more keyframes to go.

    Problem solved.
    I decided to trash the project file that I've been struggling with, sending a lot of hours down the drain, but it felt like the right thing to do. Then:
    First, I opened a new project.
    Second, I imported the large image file.
    Third, I opened a new layer.
    Fourth, I grouped the two layers.
    Fifth, I drew my line on the grouped layer
    Sixth, I keyframed the group with the desired motion.
    Now the movement of both layers are in sync. It was quick & easy.
    Where I went wrong, which lead to starting this thread, is that after I imported the large layer, I keyframed the motion I wanted.
    Next I opened line layer, drew the line, and keyframed it.
    Then I grouped the two layers. So, even tho the layers were grouped, each was separately keyed, which caused the undesired result.
    So, Kyriakos, I did in fact have a grouping problem. Not that I didn't group as you supposed, but that I grouped too late in the process -- which in turn lead to my keying the two layers individually, rather than as a group. Anyway, that's close enough for me. I'll give you credit for the solution.

  • Playing movies on two seperate iPhones with two seperate iTunes accounts

    I have an iPhone 4 and 4S.  We have two seperate iTunes accounts.  I attempt to move movies to the iPhone 4 from account #1 and i get a message which says this device cannot play this content.  My iPhone 4S will play content from both iTunes accounts #1 and #2.  I must be missing something in the software.  How do I activate two iTunes accounts on one device?  My 4S has had apps from both accounts #1 and #2 on it before.  The iPhone 4 does not have any apps from the account #1.  Somehow one device is allowing content from 2 seperate iTunes accounts and the other is not.

    Hello Schurly
    Yes you can, you can have up to 5 computers authorized for playback on purchases. If you have not purchases, then there is nothing to worry about there as well.
    iTunes Store: Authorize or deauthorize your Mac or PC
    http://support.apple.com/kb/ht1420
    Regards,
    -Norm G.

  • Split movie into two movies, including voice-over and Titles?

    I recently made a movie PROJECT out of video and stills and now want to burn it to DVD but it is too long.  I want to make two 45 minute movies out of it but can't figure out how to split the second half of the movie off from the first half AND be able to take along my voiceovers and Title pages.  I can get the movie to go, but when I try to highlight, copy and paste the voiceovers and titles into the new project it will not work.  Any way to do this??

    Go to the Project Library view so you see your project as a filmstrip with all the other projects.
    Select your Project, and click FILE/DUPLICATE PROJECT. Give it a name like My Project Part 1.
    Do it again. Give it a name like y Project Part 2.
    For Project Part 1, delete the second half and anything you don;t need.
    For Project Part 2, delete the first half, but keep any titles you need.

  • How to move the two itab into third itab

    Hi sap guru ,
    my question : i have 3 internal table (i_vbrk , i_vbrp and itab)
    1.i_vbrk like vbrk .
    DATA: BEGIN OF I_VBRK OCCURS 0 ,
         VBELN LIKE VBRK-VBELN ,
         FKDAT LIKE VBRK-FKDAT ,
         FKART LIKE VBRK-FKART ,
         KUNAG LIKE VBRK-KUNAG ,
         END OF I_VBRK .
    2.i_vbrp like vbrp .
    DATA: BEGIN OF I_VBRP OCCURS 0 ,
          VBELN LIKE VBRP-VBELN ,
          MATNR LIKE VBRP-MATNR ,
          WERKS LIKE VBRP-WERKS ,
          END OF I_VBRP .
    but for THIRD internal table which i have ' itab ' should be having same FIELDS like both internal table (i_vbrk and i_vbrp)
    so  I have ,
    3. ITAB .
    TYPES: BEGIN OF ITAB  ,
           VBELN TYPE VBRK-VBELN,
           FKDAT TYPE VBRK-FKDAT,
           FKART TYPE VBRK-FKART,
           MATNR TYPE VBRP-MATNR,
           WERKS TYPE VBRP-WERKS,
           KVGR1 TYPE VBRP-KVGR1,
           END OF ITAB .
    IS THIS RIGHT ....
    NOW I WANT THAT THE DATA WHICH I WILL FETCH FROM DB-TABLE FOR THOUSE TWO INTERNAL TABLE (i_vbrk and i_vbrp) SHOULD MOVE INTO THIS THIRD ITAB ..PLZ TELL ME WHAT WILL BE THE CODE FOR THAT ?
    answer will be rewarded....

    Hi,
      Common suggestion can be to use 'INNER JOIN' but to have
    a good performance of the code You can try the following.
    types : BEGIN OF t_VBRK,
    VBELN LIKE VBRK-VBELN ,
    FKDAT LIKE VBRK-FKDAT ,
    FKART LIKE VBRK-FKART ,
    KUNAG LIKE VBRK-KUNAG ,
    END OF t_VBRK .
    types : BEGIN OF t_VBRP,
    VBELN LIKE VBRP-VBELN ,
    MATNR LIKE VBRP-MATNR ,
    WERKS LIKE VBRP-WERKS ,
    KVGR1 TYPE VBRP-KVGR1,
    END OF t_VBRP .
    TYPES: BEGIN OF ITAB ,
    VBELN TYPE VBRK-VBELN,
    FKDAT TYPE VBRK-FKDAT,
    FKART TYPE VBRK-FKART,
    MATNR TYPE VBRP-MATNR,
    WERKS TYPE VBRP-WERKS,
    KVGR1 TYPE VBRP-KVGR1,
    KUNAG LIKE VBRK-KUNAG , 
    END OF ITAB .
    data : i_vbrk type STANDARD TABLE OF t_vbrk,
           wa_vbrk type t_vbrk.
    data : i_VBRP type STANDARD TABLE OF t_VBRP,
           wa_VBRP type t_VBRP.
    data : i_itab type STANDARD TABLE OF itab,
           wa_itab type itab.
    */////write the select statements here.....//////
    loop at i_vbrk into wa_vbrk.
      wa_itab-vbeln = wa_vbrk-vbeln.
      wa_itab-FKDAT = wa_vbrk-FKDAT.
      wa_itab-FKART = wa_vbrk-FKART.
      wa_itab-KUNAG = wa_VBRK-KUNAG.
      READ TABLE i_VBRP into wa_vbrp
      with key vbeln = wa_itab-vbeln.
      wa_itab-MATNR = wa_vbrp-MATNR.
      wa_itab-WERKS = wa_vbrp-WERKS.
      wa_itab-KVGR1 = wa_vbrp-KVGR1.
      append wa_itab to i_itab.
    endloop. 
    Reward points if helpful..................

  • How to split a "project" (movie) into two separate projects.

    After converting two Hi-eight tapes into digital format for use with iMovie 10.0.3 (?), I created a movie called "Japan 1994" , complete with titles, imported still photos, etc. But it was over 2 hours long. (My wife considers any movie longer than 29 minutes 59 seconds as cruel and unusual punishment under the U.S. constitution). So I went to Imovie "Help" .....Hah!!!, surfed the web with my problem, with further frustration. So, I devised my own method:
      1. Created two new (empty) movies, "Nihon 1" and "Nihon 2" (Nihon=Japan, in Japanese)
    2. In  "Japan 1994", found a convenient break point rougly half way through, shift selected several clips up to the half way point.
    3. copied all of these at one time (command C)
    4. Opened "Nihon 1" and pasted (command V) these clips into this project.
    5. Repeated steps 2, 3, 4 for the second "half" (into "Nihon 2")
    All of this produced two separate projects of around 1 hour each. Added appropriate titles at the beggining and end of each of the new movies.
    Worked like a charm.
    Hope this helps other users of iMoive 10. (whatever).
    lawrence268

    I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
    Wow.
    There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
    You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

  • .avi movie with two audio tracks but QT only shows one

    I have a .avi file. When I play it in the VLC Player I can choose between two different audio tracks (two different language tracks) but when I open the same file in QT I only get one track and of course it is the language I don't speak. Is there a way to get into this file and delete the track with the language I don't want so that when I open it in QT it plays the right track/language?
    If you need more info please let me know.
    thanks

    I do have QT Pro.
    H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
    The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
    It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

  • HT1414 I recently purchased three movies but two of them will not sync with my new ipad.  What should I do?

    I recently purchased three movies via ITunes on my computer.  I bought them to transfer to my new Ipad mini.  When I tried to sync them to the Ipad mini 1 worked and the other two did not.  How do I fix this without having to reset all the settings?

    Check in iTunes on the "Movies" tab while your iPad is syncing and make sure you have the correct sync options checked.
    Also, I assume you did in fact purchase (and not rent) the movies.  Rented movies have different rules - they can only be on one device at a time.

  • HT1351 Trouble Syncing Movie to two different ipods

    i purchased a movie via itunes.  i downloaded to one of our family ipods (7th gen), and am now trying to copy to a second family ipod (7th gen).  says it cannot be copied to this ipod.  accounts and computers are authorized.  only two of five registered.

    http://support.apple.com/kb/HT1495

Maybe you are looking for