Condition Dependent Document Output
Hello, all
Please help me,
We have extended classic scenario in SRM 5.0.
May I to use Condition Dependent Document Output in Spro
if I need to print 2 smartforms for one purchase order?
Best regards,
Guzal
Hello, all
I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
Best regards,
Guzal
Similar Messages
-
Condition Dependant Document Output in SRM 5.0
Hi,
My requirement is to conditionally suppress the sending of the PO output if the action profile type is MethodCall (XML) and the initial PO send completed successfully. This means that on any subsequent change to a PO for this profile type, do not send the output.
If I create a start condition for the Method Call process type, the output record is created but not sent as expected.
Because the BOR object BUS2201 doesnu2019t have the required attributes to meet my requirement, I extended it by adding the version_no attribute.
When testing BUS2201 via SWO1, the custom attribute is visible and populated. When I create the desired condition, the custom attribute is available for selection. When I create the PO the system sends the XML output. Then when I subsequently change it, the system still sends the output. Itu2019s as if itu2019s not recognizing the custom attribute in the decision to determine whether to process the send action.
Has anyone successfully implemented this type of solution?
Thanks,
Jerry MartinekThe solution to conditionaly suppress the PO output generation using a custom attribute seems to be working. Don't know why but would guess that it might have been somekind of a buffering issue as it worked the next day.
-
Issue with Customizing Condition-Dependent Document Output
Hello gurus!
When we print a Bid Invitation on SRM menubar web "Output Control", Sap creates three new spool orders.
The first contains the output format of our SmartForm ZBBP_BID INVITATION.
The second contains the format of a external mail.
And the third, contains both (the two previous orders in a single spool).
We need to change some parameters to print smartform and to store email content in a two spools maximum. Further, in the future will have to change email body and subject, and print inmediatly in the local printer. We don't know how to do anything, although we have tried several things.
What can we do? Any idea?
Thank you in advance. Hugs!!Hello, all
I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
Best regards,
Guzal -
Issue with Condition dependent PO output
Hi,
We're implementing Extended classic version for SRM 5.0.
As part of the output determination, we need to determine 2 print outputs for Purchase orders. We have 2 purchase organizations and both of them need to have 2 different smartforms for the print. So, we're designing 2 different smartforms. In order to assign the smartforms as per the purchasing org, I've used "Condition dependent output" in IMG settings. But whenever I try to print, it picks up the standard form from the IMG node "Define actions for Document Output" where the standard form is maintained. We did not maintain the custom form in this node because we have 2 forms for print.
I would like the program to pick up the custom form maintained in " Condition dependent document output".
I understand that we could use the BADI alternatively. But any help in resolving this problem through the configuration is highly appreciated.
Regards,
LakshmiHi,
Pls implement the badi "BADI BBP_OUTPUT_CHANGE_SF".
For sample code/pointers,see the foll links;
Re: How to change default smartform triggered while printing for shopping cart
Re: How to change default smartform triggered while printing for shopping cart
Re: Smartform display
Re: Add a Printer ? -> LP01
Re: Condition Dependent Document Output
Re: Add a Printer ? -> LP01
sending Smart form to Printer in SRM
Re: SRM PO's to be printed out with the PO
BR,
Disha. -
Dump in IMG Activity BBP_TRIGGER_PO_COND Condition-Dependent Document Outpu
I'm getting short dump when executing IMG activity BBP_TRIGGER_PO_COND (Condition-Dependent Document Output) with message "CX_OS_OBJECT_NOT_FOUND".
We are on SRM Server 5.5 pack 12.
Anybody had this problem too? Is there an SAP Note available?
Best Regards!
DieterHi! I had the same problem as well. Did you manage to find a solution to this? I just resolved it by
1. Run transaction code SPPFCADM.
2. Under u2018PPF: Applications in Customizingu2019, select the entry u2018BBP_PDu2019.
3. Check all the options in the u2018Clean Up Inconsistenciesu2019 box and confirm by choosing the u2018Clean Up Inconsistenciesu2019 pushbutton.
4. Refer to SAP Note 564826 for details.
5. You can now access the configuration with the runtime error.
6. By default, the action definition for print and mail is STOP. Delete the stop flag manually (right-click to choose option).
Cheers!
SF
Edited by: SF on Dec 8, 2008 11:39 AM -
Hi Friends,
I have maintained the PO output condition as 'Processing using Selection Report' in
(IMG): SRM Server -> Cross-Application Basic Settings -> Set Output Actions and Output Format->Define Actions for Purchase Order Output.
In (IMG): SRM Server -> Cross-Application Basic Settings -> Set Output Actions and Output Format->Condition-Dependent Purchase Order Output, I have maintained the
Processing Time as 'Processing when saving the document' for e-mail output.
But currently my system is not taking the Processing time ''Processing when saving the document' which I maintained in Condition Dependent PO output. It is taking the
value 'Processing using Selection Report' which I maintained in Define Actions for Purchase Order Output.
So when my PO is ordered the output status will be "Not Processed' at first and then I have to manually process it or run the selection report to process it.
I want the Po output to be "Successfully Procssed" immediately after the PO is ordered with my current settings. Is that possible? Kindly help me with this issue.
Thanks in Advance...
Best Regards,
VidyaHi,
Pls implement the badi "BADI BBP_OUTPUT_CHANGE_SF".
For sample code/pointers,see the foll links;
Re: How to change default smartform triggered while printing for shopping cart
Re: How to change default smartform triggered while printing for shopping cart
Re: Smartform display
Re: Add a Printer ? -> LP01
Re: Condition Dependent Document Output
Re: Add a Printer ? -> LP01
sending Smart form to Printer in SRM
Re: SRM PO's to be printed out with the PO
BR,
Disha. -
Issue with Condition dependent PO output in SRM 4.0
Thought I am using Condition-Dependent Purchase Order Output
The PO preivew still picks up the form which is defined under Define Actions for Purchase Order Output
Please suggest.
Thanks in advanceHi,
Have a look at the following note:
Note 968534 - Incorrect determination of conditions on the BOR object
Thanks,
Pradeep -
Condition-Dependent Output not processed
Hello,
I have configured conditions for output for purchase order documents (BUS2201) in the following path in SPRO > SAP Supplier Relationship Management > Cross-Application Basic Settings > Set Output Actions and Output Format > Condition-Dependent Document Output.
The purpose for this is to check the purchase order status prior to sending out the PO as to ensure that only successfully replicated POu2019s are sent to suppliers. When I create a PO that passes the conditions (iow the conditions are True), the output is generated in a Not Processed status. I have to now process the output manually or by running program RSPPFPROCESS. Once processed, output is successfully sent.
Note that the Time Of Processing setting is set as u201CProcessing when saving documentu201D. I would expect the output to be processed automatically by the system, but it is not.
If I create a purchase order that does not pass the condition (iow the conditions are false) an output is also generated with a Not Processed status, but I am unable to process it due to the conditions that are not met.
Please advise why the output that passes the condition is not processed automatically.
Kind Regards
ReneHi, If you want to work with Condition-Dependent PO Output, you have
to set the conditions for output in Define action for Purchase order
output. Under Action determination and Action summarization you can
choose from different option. Also clean-up customizing inconsistencies using transaction SPPFCADM and adjust to determination technology "Determination Using Conditions" to retest. Check note 564826 which may be helpful.
Best Regards
Lauren -
Hi all
We're on EC 7.02 SP05
I'm trying to set up a scenario for the document output for RFx. I have a requirement that for a specific transaction type no document output should be issued/sent (send mail) to bidders.
I've tried to accomplish this using condition-dependent document output by setting "schedule condition" for Mail to be Transaction Type <> XXX
But the requirement is partially met as in RSPPFPROCESS the outputs are there (the ones with Transaction Type = XXX), but always process in Error (because of the condition). The others outputs for bids with transaction type <> XXX are processed ok.
With Event Control I couldn't achieve it. Is it possible?
What do you suggest? Should I implement badi BBP_OUTPUT_CHANGE_SF?
It may be easier than I think but I cannot see it.
Any ideas are welcome.
Thank you.Hello Martin,
That is the standard behavior, the system always create your output medium.
The standard way to solve it is by handling the output adding some rules in customizing, but the un-sent outputs will be stored. There is no reason to delete them.
Regards,
SG -
Condition dependent output not triggering
Hi,
We created a new PO action definition. Processing time is 4 Processing when saving document. The processing time not permitted is 00XX0 Selection report. The schedule automatically flag is checked. In the action determination section, the determination technology is set at "Determination using conditions that can be transported" and the rule type is set at "Workflow conditions". This action definition has one processing type "Smart forms print".
A condition dependent output is configured for the action definition indicated above. This condition has the default settings from action definition checked. In the processing detail tab we have a specific printer we want to use. In the schedule condition this is what I configured:
( " --- Vendor medium ---
&EC Purchase Order.Sending Medium& = PRN
) " --- Vendor medium ---
and ( " --- OA address number ---
&EC Purchase Order.Vendor Address.Address Number& = 12642
) " --- OA address number ---
We have a vendor with additional ordering addresses. I got the additional address number from table BUT020. Vendor has medium "PRN" in table BBP_SENDMEDIUM.
When I create PO using the vendor and selecting the additional address (# 12642), the immediate output to the specified printer is not triggered. I mean the condition dependet output configured is not being triggered.
Please, can anyone give me some tips about what I am doing wrong.
Thanks and regards, Jose Oyon.Hi, If you want to work with Condition-Dependent PO Output, you have
to set the conditions for output in Define action for Purchase order
output. Under Action determination and Action summarization you can
choose from different option. Also clean-up customizing inconsistencies using transaction SPPFCADM and adjust to determination technology "Determination Using Conditions" to retest. Check note 564826 which may be helpful.
Best Regards
Lauren -
SD Document Output Preview Issue
Hi Respected SD Seniors
Please help on this output issue.
I am trying to print my sales documents through STD output types.
Want to issue the sales document output to the screen (Preview) or Local network printer.
Please share with me the functional & technical config steps.
For example I am using AN00 (STD Quotation Output) for printing the customized quotation document. Every thing is set and I am able to
Trigger the output successfully. But I cant see it on my screen and not able to print in my local printer.
After quotation saved, I can see the AN00 is in YELLOW. And 2 Output device are exists (LOCAL, LP01)
Please advice me the printing setup. Where should I do change to configure my print preview or connect my local network printer as a default SAP R/3. printer
Please help
Regards
PriyanHi Kishore
Thanks For your Quick Response.
According to the STD setup of AN00
Medium: 1
Dispatch Time: 1 (By Periodic Job)
Partner Function: SP
Storage Mode: Print Only
Condition record has been maintained and the output was triggered correctly upon saving the quotation document. (Process Status: Yellow)
Then i selected the output and changed Dispatch time to 4 (Immediate). The process status becomes RED once the document is saved.
Processing log is as follows
Line1: Object 0000560015
Line2: Output type: Quotation
Line3: Processing log for program /SMB40/RVADOR01 routine ENTRY
Line4: Processing routine ENTRY in program /SMB40/RVADOR01 does not exist
What is it meaning of Line4: Program is RVADOR01 exists in SE38
And Form /SMB40/SDQUO_A is existing in the SMARTFORMS transaction.
And to link the local print to SAP (As an output device), should i need to contact basis or any specific place that i need to setup.
Please Clarify
Regards
Priyan -
Automatic Email of Billing document output to customer
Dear All,
We have following requirement @ our client. You valuable inputs will be very helpfull.
Currently output (RD00) are taken via printout and later scanned and sent to customer.
Now client wants following requirement , where in once the billing documents are generated, output should be sent to customer automatically via EMAIL (mentioned in the customer master : contact person).
I kindly request you to help me with steps required to configure this scenario in SAP.
Thank you
Chaithru.Hi
For the output type RD00, Maintain the medium SIMPLE MAIL
then maintain condition record for output in VV31
Speciefy medium as 7 and in communication method mention email id to whom u want to send
As soon as you save billing document system will send the email to party.
Kapil -
Document Output determination config for MType 313
Hi Gurus,
Presently we are using STO (SLoc to SLoc, within same plant) for goods transfer.
But now we want to use MType 313 (Remove from Storage) & 315 Place in SLoc.
But we want the document output for MType 313. Can any one pls provide me the detail configuration steps to proceed? Quite urgent!
Regards,
Sachin NarvekarHi
SPRO->MM->Inventory Managment-> Print Control-> General Settings-> Item Print Indicator- > Maintain a value for 313
SPRO->MM->Inventory Managment-> Print Control-> Maintain Print Indicator for GI/Transfer Posting Documents_> maintain the value configured for 313
NACR -Create the Condition Record for the Output type WA01 or WA02 or WA03.
using Transaction event type WA, Print Version 1 or 2 or 3 & Print item Configured for 313.
Create the Goods issue with Print Item falgged & the message can be out put using T.code MB90.
Thanks & Regards
Kishore -
Material Document output message type.
Hi Experts
Please advise the details to be maintained in MN23 for the below message type.
Goods Issue Sub-con
Material Document output message type.
Trans./Event Type:
Print Version:
Print item:
Debit/Credit Ind:
Rgds
MMSAP-MM1 wrote:
Hi Experts
>
> Please advise the details to be maintained in MN23 for the below message type.
>
> Goods Issue Sub-con
> Material Document output message type.
>
> Trans./Event Type:
> Print Version:
> Print item:
> Debit/Credit Ind:
>
> Rgds
> MM
Hi,
Trans./Event Type: WO(Goods Movement for Subcontracting)
Print Version:1(Individual Slip)
Print item: 3(GR/GI Slip for Subcontracting) -
4650dn printer changing document output from print preview
recently installed 4650dn printer set up was a breeze, then suddenly the printer started changing the document output like there was an internal setting overriding the software settings. almost as if it was confused about the orientation of the paper. i am running vista with the print driver PCL 5. i have tried restoring factory settings, tried different software, finally got it to work in MS word but prefer to use MS publisher, adobe illustrator etc.
Hi Narasimhan,
Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
Any other ideas / alternates ?
Cheers,
Ashok.
Maybe you are looking for
-
Hi, I am facing this issue whenever i select any member from Run Time Prompt through Hyperion Planning Console, got an error like "*The instruction at "0x763810f0" referenced memory at "0x763810f0". The memory could not be read.* ". Please give me re
-
How do I make a highlight sports video?
I'm looking to make a highlight reel of just the rebounds from my son's last basketball game. I've got PPro cs6. Is there a quick way to do this in the timeline, clip it and scrub quickly to the next rebound, trim etc.. I am signed up to Lynda, but
-
Passing object type as parameters
HI All, I am having a procedure as parameters below Procedure xyz( one in Varchar2 two in Varchar2 three in inv_abc_obj four out inv_def_obj); No i need to run this procedure as stand alone. The object inv_abc_obj is again of type inv_abc_obj as obje
-
What issues are there in upgrading from LabVIEW 4.0 up to LabVIEW 6.1?
I am "inheriting" a LabVIEW 4.0 application that is running on an old (133MHz) Pentium PC with the Windows95 OS. I would like to upgrade the PC to a more recent CPU running Windows2000. I also want to upgrade LabVIEW to version 6.1. Are there any iss
-
Hi. I'm confused about some messages in this forum about the end of beta license of Oracle XE and some other resources telling that release version of XE will be at end of january. Please someone tell me: 1. XE will still work after 31.01.06 or has t