Condition for Gold (or diesel)

I have maintained the alternate unit of measure in the material master as 1Litre = 1GAU.
I created a PO with the condition GAU2.
But its showing inactive status as 'Inactive via formulae of incorrect' When looking at the details of the condition (value X = inactive via formulae of incorrect).
Can anyone please  tell why is it showing inactive? and how do i rectify it so that the condition is updated correctly when i update its price in MEK2
Edited by: gitika kale on Dec 8, 2010 12:40 PM

Hi,
Please refr the below link it may help you...........
http://wiki.sdn.sap.com/wiki/display/ERPSCM/Pricing-TechnicalInformationandAproachforPricingProblems

Similar Messages

  • Can't find FILTER CONDITION for filters or Function_Name for Functions

    In the Data Warehouse 11gr1 views all_iv_xform...
    I can't seem to find the Filter Conditions for filters and function name for functions that are called.
    I have looked at the other views in the documentation for the API's but can't seem to find this information.
    Any body have any ideas where this information is?
    thanks
    greG

    select map_component_id, position, source_parameter_name
    from ALL_IV_XFORM_MAP_PARAMETERS
    where map_component_id in (
    SELECT map_component_id
    FROM ALL_IV_XFORM_MAP_COMPONENTS
    WHERE MAP_ID IN (
    select MAP_ID
    from ALL_IV_XFORM_MAPS
    where MAP_NAME = :p_map_name
    AND OPERATOR_TYPE = 'Filter'
    Using map_component_id and position from above query you can see your filter condition defined in property_value:
    select map_component_name, property_name, property_value
    from ALL_IV_XFORM_MAP_PROPERTIES
    where map_component_id = :p_comp_id;

  • Can we put condition for color in bex query designer

    hi all,
    can any one guide me how to put a condition for color settings in query designer
    for example:
    i have a key figure like ANSWERED%.in analyser it should display in red if  answered% exceeds 95%.
    please help me in this issue.
    regards
    Vamshi D Krishna.

    Hi,
    Use Exceptions while designing your Query.
    Please go through the link
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm

  • How to get the salesprice and condition for a customer / material / date

    Hi all,
    how can I get the correct price and condition for a customer / material / date ?
    I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
    I'm trying to get the correct price and condition WITHOUT using that BAPI.
    Does anyone know how it is possible ? As said before : I have the customer, material and a date.
    thanks in advance for your help

    Hi
    You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
    I hope this helps you
    Regards
    Eduardo

  • AJAX Report Refresh  a_report- Condition for display not being validated

    Hi ,
    I have a report which has the following condition for dispaly:
    Exists(SQL query returs atleast one row) - SELECT * from temp1The query for the report is : select * from temp1 Now I have a button on the page and on click of the button I call the below Javascript :
    function f_insert_Temp_table(pTrans){
          var l_Return = null;
          var get = new htmldb_Get(null,$x('pFlowId').value,
                  'APPLICATION_PROCESS=temp_table_insert',206);       // ODP to insert into temp1
          get.add('TRANS_ID_ITEM',pTrans);
          gReturn = get.get('');
         //alert(gReturn);
         //$x_Show('6342610690289435');
         $a_report('6342610690289435','1','15','15');
    }Everything executes fine and the report refreshes the rows but the condition used for display doesn't get checked when I call $a_report() ...
    I can see the ODP execute successfully and row gets inserted into temp1 which means report condition is satisfied .
    If I remove the condition for the report, I can see the report getting refreshed and showing new rows through the $a_Report() call.
    Is there something that needs to be added to the script or $a_report call to validate the condition too ?Is there a way I can validate the region condition too ?
    Appreciate any suggestions/pointers here. I really do not want to refresh the whole page.
    Thanks,
    Dippy
    Edited by: Dippy on Feb 5, 2010 11:05 AM

    Hi Flavio,
    Thanks for your support.I figured where I was going completely wrong.
    Its just that when the page loads for the first time the temp table is empty and hence the report is not being displayed which simply
    means that the report id Im passing into the a_report function is not rendered on the page. Hence no matter what the temp table contains the report id is absent from the page.
    I fixed it as follows :
    Remove the condition for the report.
    Added and item and computed(P_Compute) its value using select count(*) from temp.
    Added an onload JS function which does a $x_Show('Report_Region') if P_Compute > 0 or $x_Hide('Report_Region') if P_Compute <0 .
    Now in my JS function which has an AJAX call to an ODP does an $x_Show('Report_Region').
    Flavioc : the query for my report is simple
    select * from tempIt finally dawned upon me that I'm trying to catch hold of an ID that's not rendered.
    So one issue is solved now the other part would be figuring out how to make $a_report work with pagination etc .

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

  • How to set the conditions for item deletion approval workflow?

    Hi,
    I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
     process completes .
    Change the behavior of the single task: 1.when a task is Pending.
    [I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
    My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
    When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
    When user deletes an item: 1. intimation mail.
    How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
    Thanks,
    Praveen ji

    Hi,
    According to your post, my understanding is that you wanted to start approval workflow when item deleted.
    You should first make some changes to trigger the workflow when you delete the item.
    You can use the Event Receiver to achieve it.
    In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
    http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
    You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
    http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How to create a new Condition for tax as VAT ( 4 % )  in SAP ? .

    Dear All ,
                           Pl guide that " How to create a new Condition for tax as VAT ( 4 % )  in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
    Thanx & deep regrads to all in adv.
    sap11

    In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if  it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
    If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
    Regards,
    Bhuvan

  • Tax Conditions for Sales and Distribution using Jurisdiction Code in Canada

    Hello everyone,
    I would like to share with you a doubt relating taxes for Sales and Distribution in Canada.
    The Tax conditions for Sales and Distribution in Canada are the CTX1 (GST - Canada), CTX2 (PST - Canada) and CTX3 (Base + GST). These are the Tax Conditions which appear when creating a Material or a Client for the Canada Region, and are also the ones included in the Canada Standandard Pricing Procedure.
    I tried to apply the standard method of creating a Master Record for these conditions, but an error relating the Jurisdiction Code came out while releasing to accounting.
    Does anyone one how to procceed? Which are the important issues with Finance Accounting to take in to account?
    I would really appreciate any comment relating this issue.
    Thank you very much in advanced.
    Víctor

    Dear Mr. Lakshmipathi,
    In first place, thank you very much for your quick response.
    I have tried many different procedures to get the aim, and among others, a new access sequence was created to allow the introduction of the Jurisdiction Code (UTXJ is not available for Sales Conditions) but once the Condition is created, it is not recognized when creating the Order ("pricing error: Mandatory condition CTX is missing"). Maybe it has something to do with the fact that these conditions are not included in the Finance Accounting Tax Procedure, where the conditions, which represent the same taxes but with different condition names, are defined for a certain Tax Code and Jurisdiction code.
    Among the different SAP notes for the error relating the Jurisdiction code, there was one proposing to change the Condition Category from "D" (Taxes) to a value between "1 and 4". By doing this a new error appears while creating the order, saying that there are conditions in the Tax procedure (JRC1, JRC2)which are not included in the Sales Pricing procedure. By including this conditions in the Pricing procedure, the Tax Conditions existing in the Finance Accounting Tax Procedure are brought to the Order Conditions, in addition to the Sales Tax Conditions. And there is something more, each Tax Condition from the Finance Accounting Procedure appears twice, one with the application V (Sales) with value zero, and one with application TX (Taxes) with the value existing in the Finance Accounting Taxes Procedure. This is how at the end, the corresponding %value of the taxes is brought to the Invoice with the correct Tax Code, and the proper Jurisdiction Code, which is different for each condition.
    Thank you very much for your time.
    Víctor Liedo

  • Condition for Top 10 no longer working with 2 Characteristics

    Hi experts, we have a query within a workbook with a condition set on 2 characteristics to show the top ten.  When we refresh this now it shows incorrect results as it unticks one of the characteristics in the condition.  We then have to go back to the condition set up and tick the one it unticked and it refreshes okay.  We don't want to have to do this each time.  (This worked for us prior to applying patches.  We are on Patch 18, Bex Analyzer BI Add-On 7.X based on 7.10, Support package 7, patch 1 version 1352.)
    We can't find any SAP Note to correct this?
    Any help you can offer would be great.
    Thanks.
    N

    Hi,
    I too have faced problem with conditions.As a thumb rule if i apply(assaign) the condition for the last characteristics in the tab rows (or last charactristic added in rows) giving fine results.
    Try to apply and check it may work....
    Regards,
    anil

  • Pricing condition for Taxes in R/3 not being calculated.

    We have SRM4.0 in classic mode with R/3 4.6C. In SRM we configured Tax calculation is in R/3. When creating the shopping cart, EBP calls R/3 via RFC for the Tax % and displays the tax information in the cart successfully. The cart is saved and the completed PO is created in R/3. However, our pricing condition for tax, at Pur.Org/Material group in R/3 does not get calculated - so in the item condition screen, no tax is calculated. If i go into the change PO and in Item conditions/Update, (G-Copy Pricing and Redetermine taxes) then it is OK (but this is not ideal). When i do an RFC trace, using RSRFCTRC, i can see my Pur Org, Material Group and Tax code all being passed to R/3. Also, when i do a manual SE37 test on funct.mod. BAPI_PO_CREATE, it does calculate tax correctly - i am stuck - any help appreciated. rgs Adam

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • About condition for loop in BPM

    I design a loop, condition is counter<>3.
    It seems only receives 3 messages when I send more than 3.
    for example, I send 105 messages, for every 10 messages it will generate a file. and I totally have 11 files.
    What is the best way to end the loop?

    Hey,
           you need to have two loops in this.
           Have your send step(for the file) in the inner loop.
            The condition for this loop will be te number of messages that you need per file.
          The outer loop should terminate when all the messages are recieved.(recieve step will be in the outer loop)
       This is not possible with the no. of messages
    You can do one thing, provide a stop message as an input along with the other messages.
    And set the condition for the outer loop for the stop message.
    This will terminate the outer loop.
    regards,
            Milan

  • The Condition for service price determination incomplete

    Dear experts,
    I run the System with EC&O Best Practice. Howerver, I can not enter Services on tab Service of Sales Order: Short text of Service, Quantity, UOM, Gross Price. the error "Condition for service price determination incomplete" occours when I press Enter key.
    Conditions for service price determination incomplete
    Message no. SE477
    Diagnosis
    Either the calculation schema for services does not exist or the condition types have not been defined correctly.
    Procedure
    Please check your Customizing settings for service conditions.
    If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
    Please help me check this issue on the attached file.
    Thank you very much.
    Thanks,
    Binh Tran
    <Personal details shared by OP is removed by Moderator. >
    Message was edited by: Jyoti Prakash

    Hi All,
    Thank you very much for your inputs.
    I checked all the notes, 25357, 27024  and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
    This error is in SD not in MM, while i am creating the inquiry BOS.
    If any one come across it and solved it, please let me know.
    Regards,
    Suresh

  • When launching Premiere Pro CC I get this message... Sign in requiered. Terms and conditions for trial software.

    Yeah!
    When I launch Premiere Pro CC 2014   (on a PC, windows 7.1, 64-bit) I get this message:
    Sign in requiered. Please sign in with your Adobe ID.
    Also on screen is a text that is headlines:
    Terms and conditions for trial software.
    I have been using my subscription for more than two months without a problem.
    When then trying to enter the program this way, A new message
    comes up sayin:
    Please connect to the internet and retry.
    Wierd!
    I have been through the Q&A on these isscues and talked to support
    but nothing seems to help!
    Please, anyone!
    Been like this for weeks and now I really need to use Premiere.
    /E

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Activating conditions for Purchase Order workflows in EBP

    Dear SRMer's,
    I am facing the following problem:
    System Info :SRM Server 5.5, ECC 6.0
    Scenario 1:
    All start conditions for Purchase Order in SAP Business Workflow are activated.
    I created a direct procurement shopping cart (DP)  in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP PO.
    When Ordering, the follow on Documents are created, but says the PO is waiting for approval.  When I check for this PO in the Backend R/3 system in the Me22n (Display PO changes), I don't see the PO.
    Scenario 2:
    All Start conditions for Purchase Order in SAP Business Workflow are de-activated
    I created  another direct procurement shopping cart (DP2)  in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP2 PO (Status is held). 
    When Ordering, I get the Warning message, no workflow found, contact system administrator.
    Please advice what needs to be configured for the PO to be ordered successfully.
    Thanks in advance
    Raj

    Hi,
    In your scenario 1, if system is saying that there the PO has to be approved, it means that you have managed the user that will receive the workitem..
    Activating all PO WF is not a solution as in standard there are two many cases activated (amount, role, limit...)
    I propose you to first activate only the 0 step WF and to overwrite the code inside
    Just code that every PO modification should trigger O step WF thus it will be more simple to test it.
    Later on, if you want to implement more complex starting conditions, you just have to modify the WF content...
    Kind regards,
    Yann

Maybe you are looking for

  • Does the new Mac Pro has an air filter?

    I think that if you pay this huge price from a computer, you should get an air filter too, but do you?

  • Ipod wont update due to deleted playlist

    i have accidently deleted a playlist on my ipod, and when i went to update my ipod all of the songs were taken off it. now when i try to update my ipod the following message appears: Songs on the ipod "Tom" cannot be updated because all of the playli

  • Interactive Report Events

    Hi Friends, Can any one give sample programs  of below Interactive Report Events ? AT PF<nn> (obsolete) AT LINE-SELECTION AT USER-COMMAND points for sure.. Regards Vijaya

  • Cannot activate job BI_PROCESS_TRIGGER return code 8

    Hi Experts,                  When i check the cancelled job in (BI) Quality system we got this messages for a Process chain jobs in job log: Job log for the PC: Job started Step 001 started (program RSPROCESS, variant XXXXXXXXXXXX, user ID ALEREMOTE)

  • NAT destination IP address

    I have this toplogy: A ------ ASA -------- B A's real IP is 1.1.1.1 B's real IP is 2.2.2.2 B's mapped IP is 3.3.3.3 How do I NAT it so that when A tries to connect to 3.3.3.3, the destination is translated to 2.2.2.2.  But at the same time, when B co