Condition types from Central Contract not copied into Purchase Order

Hi,
When creating a central contract from SRM to ECC, all the condition types are copied well.
But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
What can I do to assure, that all the condition types from the contract are displayed in the PO.
Do I have to do some customizing, or is there a SAP Notes to resolve this.
Regards,
Alexander

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

  • SRM - condition types of central contract not copied to ERP (CentContract)

    Hi,
    When I add several condition types to a contract in SRM (updating). After releasing the condition types are not updated in the contract in ERP.
    How can I resolve this. Is there an OSS note?
    Regards,
    Alexander

    condition types are copied from SRM to ECC

  • Shelf life from material master not flowing into purchase order

    Hai friend
    I have set a shelf life value in material master ( both minimum & Total shelf life). 
    But while creating purchase order, values are not flowing from material master to purchase order.
    The field is empty.
    How to configure, please help.
    Regards
    Rammohan

    1.activate batch management
    2.to calculate SLED production date/date of goods receipt is mandatory during GRN
    3.Maintain characteristic for production date MCH1 - LFWRT
    4.assign this to class
    5.Maintain this class to material
    6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
    hope it helps

  • Purchase reqisition header note not copying to Purchase order header Note

    Hi
    can you help me any body  regarding this issue
    "purchase reqisition HEADER NOTE  not copying to Purchase order HEADER NOTE " .
    it is very urgent issue for me please.
    Thanks
    Madhu.

    hi madhu
    ans1.)  in ECC 6 it is not possible to copy PR text to PO text , becouse the only way to convert PR into PO is document flow and document flow will show you only line items.
    ans 2 )  PR text is used for maintaining text related to PR genration information , like which MRP run is giving this PR or other information which user wants to maintain .
    ans3.) if user have done same thing earliar then it may possible that he was using 4.7 or ECC 5  .
    let me konw what user is saying .
    regards
    ravikant dewangan

  • Item text in Purchase request is not copied to Purchase orders.why?

    que1:Item text in Purchase request is not copied to Purchase orders.why?
    que.2:where this item text is get stored, i mean to ask which table.
    please reply asp.
    SAP Learner.

    hi
    >que1:Item text in Purchase request is not copied to Purchase orders.why?
    spro >mm>Purchase Order>Texts for Purchase Orders>Define copying rules for item(line item) texts.
    spro >mm>Purchase Order>Texts for Purchase Orders> Define copying rules for header text.
    >que.2:where this item text is get stored, i mean to ask which table.
    use function module  READ_TEXT and table STXL
    regards
    KI

  • Invoice Partner Not Defaulting Into Purchase Order

    We have recently upgraded to 6.0 and since go-live we have been having an issue where the invoice partner does not always default into the purchase order at conversion from PR. Can anyone offer assistance?

    Hi,
    Is there any specific Copy Control Routine or User Exit that copy Partners from a Purchase Order Header to Delivery Header?
    Please provide me the Routine Name/Number or User Exit Name.
    Thanks,
    RV

  • Unlimited Indicator not copying to Purchase Order

    Hello experts,
    I'm running ECC 6.0 and am unable to solve this.  I have subcontracting info-records for materials that specify a material to a vendor, pricing, tolerances, etc.
    In the Purch. Org 1 screen of info-record view, I can see the tolerances are maintained (5% under and unlimited over-delivery for example).  The 5% under is copying when a purchase order is created for the material in question, but the unlimited over-delivery indicator is not copying.  If I clear out the indicator and maintain an actual over-delivery tolerance, it copies just fine.  Only the indicator is failing to copy from the info-record.
    Any familiarity with how to solve this issue?
    Kind Regards,
    Kelby

    Hello Kelby,
    Even if nothing is maintained in the material master plant(purchasing view) the unlimited tick should default from the PIR. PIR always has a higher priority than master as it is specific to material+vendor. The help for the 'unlimited' tick in the PIR mentions this.
    You can have a look at this note. It is very old and probably not valid for your release. However this is the only note I could find. You should probably raise an OSS message.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

  • Weight from Handling Unit not copied into outbound delivery weight field.

    Hi,
    We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
    How can we put HU weight in the outbound delivery?
    Thank you,
    Eric van Zundert.

    hi Eric,
    you habe to do this with a user exit.
    In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
    I copy at every save the sum of the HU-weights in the fields of likp.
    Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
    You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
    hans

  • Line item text field from MIGO are not copied into FI line item text field

    Hi all on SCN, please, I need a help.
    It was created as required by the user a field status group with the text field required.
    This field status group was assigned to some accounts, in order to make my unit tests.
    u2003
    In development envirionment was made some tests directly in FI area, and it works properly.
    u2003
    But the user made a test using MIGO transaction, choosing in this transaction an account that he changed its field status variant to the one created in development environment, that make the text fiels required. So, to start, he donu2019t fill the text item of MIGO, and a message error appear stating that he needs to enter values in this field.
    After fill in the text fiels, he can save his work.
    u2003
    But the FI document generated donu2019t receive the line item text typed in MIGO, but receives the values on Reference document and Document Header text entered in the header of MIGO, what is missing, donu2019t is automatically copied MIGO text line items to FI documents line Items, does there is some additional configuration missing?
    Hope someone help me with this issues.
    Thanks in advanced!

    Hi,
    Material document will get updated in reference field in FI by default.  If for any reason, want to get this updated in text field, you need to define a subsititution in GGB1.
    Best Regards,
    Madhu

  • Text is not copying into Header Text Type from Contract to Order & Invoice

    Salute Masters!!
    I have done related configuration in VOTXN for Sales Document & Billing.
    After creation of Contract, given Text in New Header Text Type, itu2019s not copying into Sales Order or Invoice.
    Although, which was configured earlier one, for that Header Text Type, text is copying into Order & Invoice both properly.
    Firstly; I have given the same Access Sequence for the New Header Text Type, It was copying the same matter which was given into Old Header Text Type, then I have created new Access Sequence & assigned changed Access Sequence for the New Header Text Type, even then it is not copying.
    I have checked other Configuration those are OK!
    Assignment of Sales Document Type to Text Determination Procedure, it is OK!
    Please provide the solution.
    Thanks in advance.
    Warm Regards,
    Sanjai Srivastav

    Hi
    Hope the issue is resolved , if not please check these settings - VOTXN
    1. Create Text Type for your Sales order -S001 and Billing Invoice - B001
    2. Create Access Sequence - Z001.
    3. Include your Both Text Type in respective Procedures.
    Now
    WHen you will assign the Text into your Text Procedure - Assign same Access Sequence in both the case.
    In your Sales Order text procedure - Assign
    1. Assign Text Type S001  and Access Seq Z001
    2. Select the Access Seq on the left side in the VOTXN T-Code , a POP up will come and then input Your Access Seq into that
    3. You will get another screen, Here give the Seq No-1 and VBBK Header Text and Again Assign TEXT type S001.
    Now go to Invoice Text Procedure
    1. Assign Text Type B001 and Access Seq Z001 and SAVE.
    Once you will do that the step 2 and 3 will automatically get copy in the backend.
    To Check
    2. Select Access Seq on left side and in the Pop Up input access Seq. Now there you will see the system has copied the
    fields from the Order.
    Now try running the scenario. same you can do for Contract and Order.
    Hopefully this will Help you.
    please let me know if any concerns
    Thanks
    RB

  • Can Multiple Objects be copied into Sales Order??????

    Hi,
    I have created three charecteristics and assigned to a class of class type 001. In the classification view of material master for each material i assigned the class.This assignment is done for calling the object at sales order level.
    I am able to find the multiple objects for single characteristics in sales order but multiple objects are not copied into sales order..only single object is copied into sales order...when i try to copy multiple objects system is throwing warning message as "You can only copy one object in this mode".... Is it possible to copy multiple objects ?? Any answers will be highly appreciated.
    Ramagiri.

    Hi,
    But what's the purpose behind that.Material Class 001 is just only for information purpose only to search the materials with help of class and characterstic.
    If your material is configuable one then you have to use Class type 200 - Material (Configurable Objects) and for the same you have maintain the characterstic value during sales order creation.
    Regards,
    Dhaval

  • Copying of Service items from contract into Purchase order

    Dear Friends,
    We have upgraded from 4.6B to ECC6.
    Previously when we create Purchase Order with reference to Contract(i.e.Release order),we select service line items by selecting service selection button from PO and select the service line items from Contract,then whatever the line item whether line item 30,or line item 60 copied from Contract is copied into line item 10 of Purchase order in 4.6B version.
    But in ECC6 ,it is copied into other line item but not copied into line item 10 of purchase order.
    Please suggest ,what needs to be done, what went wrong.
    Regards,
    Dayanand

    Hi,
    Pl. elaborate whether the quantity 1 is appearing at Item Overview level or at Item Details level. At the item overview level the quantity will aleays be 1 with unit of measure as AU. At item details, you will be able to view the actual quantity of services copied from contract.
    Regards,
    Prashant
    - Pl reward points if answer is helpful to you

  • Condition YPS1 not copied into Billing document

    Hi All,
    I have an urgent issue wherein my condition YpS1 determined in the sales order is not copied into the billing document
    Any suggestions would be appreciated... The YPS1 is pulled out from the standard price from the material master
    Any suggestions would be appreciated
    Thx,
    Vinay

    Thanks for the reply.really appreciate it.. On further investigation my copy control is set up in this way,
    SO --> Delivery && Delivery --> Billing.
    In my Billing copy control(Delivery- BillinG) i have a pricing tye set up as Customer Reserve X.... do you think i might have to check this???Please advice where to check as i do not have any idea on what this customer reserve X means??
    Thanks again
    Regards,
    Vinay

  • Deletion of Condition type from contract.

    Hi Experts,
    In contracts (1000), there is one wrong condition type is displaying and I don't want to delete one by one in every contract,
    Can anyone advise that how to delete same condition type in all contracts through one modification?
    regards,
    Dhiru.

    Hi,
      If you want to delete line item condition then use BAPI  "BAPI_SALESORDER_CHANGE".
    Regards,
    Siraj

  • Restrict referance of pricing and condition type from latest PO.

    Hi Experts,
    I am creating Purchase order and at the time of creation of purchase order system is copying prices and condition types from latest PO.
    Which is not desirable to our business process, when I dig out I found out that in standard SAP system
    The system looks at pricing in the hierarchy order as below:
    u2022     Contracts/scheduling agreement
    u2022     Condition records
    u2022     Info Records
    u2022     Last purchase document
    So can some one help me with information how to restrict system to follow this referance of pricing.
    I want to enter price as well as condition type manualy every time user create a purchasing document.
    Also i want to know can it be restricted specificaly for few document type.
    Thanks
    Best Regards
    Ritesh

    Hi sir
    can we try this
    Use the user parameter EVO to indicate that no price adoption from last Purchase Order must take place:
    IMG: MM -> Purchasing -> Environment data -> Default values for Buyers
    -> Setting for Default values.
    Select or setup a default value and on the "price adoption" tab you may choose how copying of conditions from last purchase order must behave. Select "Do not copy".
    Then assign this default value to the user, using the EVO parameter.
    [http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/price-to-flow-from-info-record-at-plant-level-813066]
    [Re: new info record with same details as archive one.;
    check following notes it may helfull
    569885 About Info Record Update indicator (EKPO-SPINF)
    13127 Update in info record from PO, quotation, contract
    430543 FAQ: Purchasing info record
    675523
    456691
    Regards
    Kailas ugale

Maybe you are looking for