Condition value is not displaying in sales order

Hi Friends,
when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
the condition value is not displaying in cond. value column in conitions tab of sales order.
In analysis it is showing as condition record found...
please help me...
with regards

Hi,
can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
Regards Thomas

Similar Messages

Header condition type value not displayed in sales order output

Hi gurus,
I have observed a strange issue regarding a header condition in a sales order.
we have a set up like following:
1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
According to business,we must have the header condition value printed on sales Order output.
Please suggest how to proceed.
Thanks in advance.

Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
You might need to give him condition when it shuld be printed and when not.
You can take reference of another output type for which it is printing

Rounding Off Value is not copying from Sales Order to Invoice

Hi Experts,
In Pricing Procedure i maintained DIFF- Rounding Off Condition type with the following Combinations.
Print:X
Requirement:13
Cal Type: 16
Bas Type: 4
When i create sales order the system is calculating Rounding Off after saving the sales order.The requirement is that it should shows the rounding off value before saving the sales order.Secondly when i make invoice the rounding off value is not copying from the saved sales order.After i save the invoice in VF02 the rounding off value is coming .
Regards
Subhasish

Cond type DIFF has cond catgory L Generally new when copying. So the value from sales order will not be copied, it will be redetermined in invoice.
Also rounding off cond is to round the total value which can change in invoice based on the invoice qty.

Letter of Credit value is not updated against Sales Order

Hi SAP Gurus,
I have created LC in VX11N. When I am assigning the LC in the item level while creating the sale order, in the LC master, the open value is still remaining the same. It is not getting adjusted against the sale order value.
For Ex: Against Rs. 1 lakh of LC of the Customer, we create a Sale Order of Total Value Rs.80,000/-. Then the remaining balance of Rs.20,000/- is not getting upadted in the Open Value field in the LC Master.
Also, in the sale order LC screen part, the tab Ret. beside pmt. guarantee form is remaining at 0%. It is not getting edited.
Plz suggest is this a configuration issue or SAP Standard doesn't support LC fully.
Regards
Subrat

Hi SAP Gurus, I am also facing the same problem of open value of Letter of crdit not getting updated. Kindly solve this. It is very urgent.
Regards,
Anant Saraogi

Condition type is not reflecting in sales orders

hi,
i have created two condition type like jser (service tax) and other one is jste(service tax +cess) but in pricing procedure jfact it is reflecting but while making contract order these two condition type is not accessing.
please help in this connection.

Hi,
After Creating the CONDITION TYPES you need to assign the condition types in the PRICING PROCEDURE
goto the
SPRO->FINANCIALACCOUNTING>FINANCIAL ACCONTING& GLOBAL SETTINGS>TAX ON SALES /PURCHASE>BASIC SETTINGS--->CHECK CALCULATION PROCEDURE.
Here select you procedure and assign the CONDITION TYPE
regards,
santosh

Condition value (KWERT) in RED for sales order pricing

Hi,
Please advise as I find the condition value for my base price is showing up in Red color, which finaly leading to decide Net price.
I have my access sequence at customer parent and customer child level. I have record aslo maintained at both level when it determines in sales order item conditions tab it shows both the price one in black color for customer parent (inactive) and another one in customer child level RED color (Active).
Example -
Base price - records
customer / MPG = record matianed $100
sold to (customer child) / MPG = record matianed $90
Now in sales order condition tab both price show up but $90 is valid and active but in RED color.
Advise what is the reason and do we need correct some thing.
thanks

Hi,
Could some one advise why do we see some time both the condition record data even though first access has found the data.
we had record for customer hierarchy parent and sold to at lower level of hierarchy but if we maintain both the recprds it is showing twice the same condition type to show both records.
Advise how can we resolve.

Condition type JEXP not picking in sales order

hi
i was working with all configuration of TAXINN
i am facing with a problem
when i am running mine sales order i am not able to see condition type JEXP(BED) , JEAP (AED)
can i now where i am gng wrong
whereas i can see all the other condition in sales order
but when i enter it manually JEXP it is taking but in again in billing it is not showing
can u plz help me
Regards
Vini

Dear Vini,
Please Check the configuration settings through IMG path
SPRO>IMG>Logistics general-->Tax on Goods movements >India>Basic settings-->Determination of Excise Duty -->Maintain Excise defaults here you check JEXP condition type is maintaining for A/R BED or not if not maintain then try.
Also check the condition record maintanance for the JEXP condition type through VK12 transaction.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Oct 1, 2008 6:51 AM

CO46 report not displaying all sales orders

Dear all
We are not able to get details of all sales orders in CO46..(All item categories and different sales order types).Screen remains blank while executing..It doesn't show line items-Overview screen..
can u please tell us the reason for the same
Is it to do with sales order type or item category...How do we bring all sales orders in this report
Regards
sudha

Hi
I think this report only shows the sales order that have diract relation to a Production Order. The other Sales Order are not showed
If you want a report for all sales order, try VA05 or SD01
Hope this helps
Roger

Output type attchment not displaying for sales orders

Hi,
Output type attachment is not showing form some orders NACE is perfectly configured 10 out of 100 not showing in
output type as attachement rest of ordrs showing attafchemtns.
How to do where to find out.

Hi..
Check Transaction " V/43" whether sales order output type and procedure are defined or not for a particular order type.
Regards,
Lokeswari.

Condition type value not update in sales order

Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.

Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen

Not Updating Open Sales Orders Value for CreditManagement

Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasad

hello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

Tax condition(JVAT) of ship to party is not triggering in Sales order

Hi,
Tax condition(JVAT) of ship to party is not triggering in sales order...
Scenario:
Tax condition types:
JCST- CST Payable
JVAT- VAT Payable GJ
Customer Tax classification for JVAT in OVK3:
1- VAT 4%
A- VAT 0%
B- VAT 2%
Material Tax classification for JVAT in OVK4:
0-Tax Exempt
1-Full Tax
In CMR for
Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / 1 / VAT 4%
In CMR for
Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / A / VAT 0%
Access Seq: JLST
Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
Now the sale(Shipping to) is happening in Gujarat..
In sales order
I entered SP:1001 and SH: 2001
When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
Kindly guide me where i went wrong...
Regards
Azeez.Mohd

Hi Friends.
I found the solution...
Its customization mistake..
Solution:
When we have 'n' tax categories then we should have 'n' condition tables..
I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
with regards

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

Getting value under price tab in sales order

hi all,
when i am creating a sales order i am getting the values in the condition tab according to pricing procedure, but some of the values are not getting displayed under the price tab.
what configuration i have to do in the pricing procedure to get values under the price tab..
Thanks and Regards
shanto aloor

Hi Shanto
Do you mean
1.Some of the condition types itself are not appearing or
2.Condition types appear but the condition records are not appearing against the condition types
Please try following
1.In create condition types screen, check Source System column setting.
2.Check if the access sequences are assigned to these condition types. If access sequences are not
assigned to the condition types then the condition types and the values against these condition types
are not displayed automatically but are required to be entered manually.
Regards
Dinesh

Condition value is not displaying in sales order

Similar Messages

Maybe you are looking for