Condition value (KWERT) in RED for sales order pricing

Hi,
Please advise as I find the condition value for my base price is showing up in Red color, which finaly leading to decide Net price.
I have my access sequence at customer parent and customer child level. I have record aslo maintained at both level when it determines in sales order item conditions tab it shows both the price one in black color for customer parent (inactive) and another one in customer child level RED color (Active).
Example -
Base price -  records
customer / MPG = record matianed $100
sold to (customer child)  / MPG = record matianed $90
Now in sales order condition tab  both price show up but $90 is valid and active but in RED color.
Advise what is the reason and do we need correct some thing.
thanks

Hi,
Could some one advise why do we see some time both the condition record data even though first access has found the data.
we had record for customer hierarchy parent and sold to at lower level of hierarchy but if we maintain both the recprds it is showing twice the same condition type to show both records.
Advise how can we resolve.

Similar Messages

  • Condition value is not displaying in sales order

    Hi Friends,
    when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
    the condition value is not displaying in cond. value column in conitions tab of  sales order.
    In analysis it is showing as condition record found...
    please help me...
    with regards

    Hi,
    can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
    Regards Thomas

  • Condition Value(KONV-KWERT) for Sales Order

    Hi Experts,
    I have to print the condition value for ZTDC Condition Type from Header Value, currently it is getting the data from line item level. I am getting condition no document (KNUMV) from VBAK table and checking that condition no document in KONV table to retrieve the Condition Value(KWERT) but it is picking item level data.
    We need to get the condition value for the header level.
    Please help me.
    Points will be rewarded for useful answer.
    Thanks,
    Vinay.

    Hi!
    Try using table KONP (condition at position level) and KONH (condition at header level).
    Regards
    Tamá

  • Searching for Sales orders with a particular condition type..

    Hi,
    I'm searching for sales orders and purchase orders which contain a particular condition type, can someone please point me in the right direction?
    Regards,
    Attiq

    Hi,
    Goto SE16 and put KONV
    Put the particular condition type that you are looking for and execute
    Copy the KONV- KNUMV value for all the records found
    Goto SE16 and put VBAK / VBRK
    in the field VBAK-KNUMV or VBRK-KNUMV put the copied data from step three and execute
    Note all the corresponding document number i.e. VBAK-VBELN / VBRK-VBELN
    Pls reward if helpful.
    Regards,
    Pramod.

  • Fetch Vat and Octroi value for Sales Order Smartform .

    Hi all ,
    I am using a copy of /SMB40/SDORC_A smartform for sales order creation . I have to pass the vat and octroi of individual item as well as on the final total and then give the final bill amount . Can anyone please tell bewhich fields should i use and which areas do i need to do the changes in the smartform.

    Hi Disha,
    From the billing number VBRK-VBELN, pick the value of VBRK-KNUMV and pass this to KONV-KNUMV and display the value of KONV-KWERT against KSCHL
    Regards..
    Palaniayppan subbiah

  • Surcharge rate for sales order item condition

    Hi,
    I have a two condition for sales order item.
    First  condition is ZP00-Price. It is using for automatically price with customer and material. It linked with account key in pricing procedure.
    Second condition is ZI00-Index rate. Calculation type is A-Percentage. This condition value is monthly. It will be used for surcharge with percantage . I have a formule this condition.
    It is not linked with account key in pricing procedure.
    Formula for ZI00 - Index rate:
    (Index Rate to delivery date - 1 / Index Rate to contract start date) x 100
    For example;
    Index rate conditions is entrying monthly;
    Index date          Index%
    01.08.2008         1,05
    01.09.2008         1,15
    01.10.2008         1,17
    Contract start date = 03.08.2008
    Delivery date = 02.10.2008
    ZP00 = 500
    ZI00 = Index rate for sales order item = ((1,17-1)/1,05 ) * 100 = 16,19
    Last condition value = 500 + (500 * 16,19)/100 = 500 + 80,95 = 580,95
    What can I do for this pricing?
    Best Regards
    Gulay Celik

    Hi
    I think that perhaps it is too late. The application supports cancellation and re-billing as separate transactions. Maybe this is not a 'development' problem.
    Cheers
    Dom

  • Dectivate pricing condition for sales order not service order.

    Hi,
    We are on ECC6.0 and CRM5.0
    I need to add new condition type to the existing pricing procedure.It should be activtaed only for service orders and not for sales order.I can achive this by adding new requirement in pricing procedure to limit this condition type based on order type.
    Example:  if KOMK-AUART eq ORDER_TYPE.
                    sy-subrc = 0.
    But I don't want to do this,because I would need to change this requirement everytime I add new service order type.
    Is there any field in Pricing structure KOMK bu using which we can achieve this. ?
    Please suggest any other idea by which I can achieve this
    Thanks
    Dona

    Currently ,we have one pricing procedures for both the scenarios...
    We control if the perticular condition type to be active or not by writing a requirement which checks the order types.
    This has been done this way because we  built the pricing procedure in ECC and tranfer it to CRM.Also we donot have service orders in ECC.
    any further alternatives guys..

  • Condition for sales order delivery block

    Hi All,
    I am new to Workflow,
    I have created work flow  for Sales order changes, its works fine.
    but my requirement is after that it will check whether sales is block for delivery or not.
    if it is block then only it should send mail.
    Regards,
    Arpit

    Hi Arpit,
    1. Go to t-code SWO1.
    2. Click Settings -> Delegate.
    3. Delegate the BO YBUS2032 to the BO BUS2032.
    In workflow perform the following steps:
    1. Go to t-code SWDD and open your workflow template.
    2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
    3. Go to Start Events tab.
    4. In the Object type enter your BO name BUS2032 (not YBUS2032), in Event of object enter the BO event.
    5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement.
    6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Use the attribute that you created and make the start condition. Check the condition before saving (recommended).
    6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
    7. Save the changes made and activate your workflow.
    Hope this helps!
    Regards,
    Saumya

  • Additional selection Condition for sales order in CFM1

    Dear APO Gurus,
    Our business scenario requires CFM1 to have additional selection
    condition based on Sales order type (Table:VBAK, Field: AUART) for
    sales order data.
    Kindly guide us if there are any enhancement or OSS note to acheive the
    requirement?
    I know OSS note: 507696 can be used for enhancing CFM1 selection conditions based on MARC table
    fields. Any way this will not solve our requirement.
    Thanks in advance for your answer.
    Vignesh M

    Hi Bipin,
    Yes, that would be an option if we couldnt find a solution for setting a new selection condition in CFM1. Is there a CIF userexit related to sales order? That would be grateful..
    Cheers.
    Thanks in advance
    Vignesh M

  • User exit to modify sales order pricing condition

    Hi Experts,
    I need ot modify Sales Order Header Condition (ZFRH), Condition Value (KWERT) for Transaction VA01 & VA02
    I agree there are many user exits which will modify XKOMV-KWERT structure and can populate what ever value we insert.
    But the value we insert is inserting into line item condition and the total of all line items is populating in Header .
    I need to modify only Header condition without populating Line items
    Thanks ,
    Basheer .

    Hi:
    Program : MV45AFZZ
    search for USEREXIT_NUMBER_RANGE.
    BR,
    Manthana

  • Manual Condition Type should be visible in Sales order by default

    Hi
    How to maintain manual condition types in Sales orders by default. They will be maintaining the value based on the discussion they had with the customer(Negotiated price). The condition type should be visible in the procedure and they will only enter the value.(The method of keying condition type manually is not accepted by the client).
    Thanks in advance.
    Regards
    Vamsi Javaji.

    Hi,
    In the PRICING PROCEDURE V/08 maintain the CONDITION TYPE as Mandatory
    In the CONDITION TYPE V/06 maintain the field  MANUAL ENTRIES  as C which is Manual entry has a priority.
    And check the box VALUE
    Now maintain the condition records for the condition type in VK11 with 0 value
    Now while processing the sales order the CONDITION TYPE will trigger from the CONDITION RECORDS with 0 value and this can be in EDITABLE mode ( and maintain the value)because of the check box VALUE you flagged in V/06.
    Please try this and revert back if you need further details
    thanks,
    santosh

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • Update KOMV-KBETR field for sales order and billing

    I would like to update the KOMV-KBETR (condition amount or percentage) under condition tab for both Sales order and billing.
    example:There are two condition types ZA00 and ZB00 and need to get the KBETR value from ZA00 and add it to KBETR value of ZB00 and update the sum in KBER value of ZB00.
    1. creation of sales order & billing.
    2. Change of sales order & billing.
    3. For single & multiple line items in both sales order & billing.
    4. during updation of price in the change mode of sales order & billing.
    5.When user click on Update button in the condition tab(i.e., when clicked on Carryout new pricing)
    I tried with the VOFM routine but as the routine is triggering multiple times the sum is calculated again and again.For that I set flags also.It is working for sales orders but for billing creation the field XKOMV-KBETR is cleared after this routine.
    So I would like to know are there any EXITS for this scenario or any one entountered the similiar issue which I am facing.

    Hi Brad,
       It is an Client requirement.So need to do the addition of that condition types.
    Can you please let me know the configuration point where we can do it and the condition type which we need to update the Rate/Amount value.ie., KOMV-KBETR is and Price list value and not the subtotal one.
    Thanks,
    Srilakshmi Lagisetty.

  • BADI for Sales order

    Hi Gurus,
      I have to caculate the volume discount based on the goods ordered. So that i have to calculate the discount and update it into Net value in condition tab in va01. Please provide the what is the BADI for that suitable requirement so that it should be executed before saving the order. And also the discount should be displayed in the item level. Please provide me some suitable solution.
    <b>Its Very urgent.</b>
    Points will be awarded
    Regards
    Ravi

    Hi
    Use the Std Include MV45AFZZ for writing the user exits related Sales order
    which is a include in the std sales order program SAPMV45A
    Write the code in the appropriate FORM..ENDFORM.. and see
    see further the following Exits and BAdis for Sales order
    Enhancement
    V60F0001                                SD Billing plan (customer enhancement) diff. to billing pla
    V46H0001                                SD Customer functions for resource-related billing
    V45W0001                                SD Service Management: Forward Contract Data to Item
    V45S0004                                Effectivity type in sales order
    V45S0003                                MRP-relevance for incomplete configuration
    V45S0001                                Update sales document from configuration
    V45P0001                                SD customer function for cross-company code sales
    V45L0001                                SD component supplier processing (customer enhancements)
    V45E0002                                Data transfer in procurement elements (PRreq., assembly)
    V45E0001                                Update the purchase order from the sales order
    V45A0004                                Copy packing proposal
    V45A0003                                Collector for customer function modulpool MV45A
    V45A0002                                Predefine sold-to party in sales document
    V45A0001                                Determine alternative materials for product selection
    SDTRM001                                Reschedule schedule lines without a new ATP check
    SDAPO001                                Activating Sourcing Subitem Quantity Propagation
    Business Add-in
    BADI_SD_SCH_GETWAGFZ                    Scheduling Agreement: Read WAGFZ from S073
    BADI_SD_V46H0001                        SD Customer functions for resource-related billing
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to Modify the standard layout set for Sales Order

    Hi all,
    Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
    Thanks in advance
    Santosh R

    Hi, Dear Ferry Lianto,
    Thank you very much.
    Commonly I know the total pricing procedures.
    But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
    For example, I can see the following kind of
    contents in the Tab:condition of a sales order:
    PR00     Price     130.00000      TEST     100
         Gross Value     20.12      USD     100 <-how to
         Discount Amount     0.00      USD     100
         Rebate Basis     20.12      USD     100
         Net Value for Item     20.12      USD     100
         Net Value 2     20.12      USD     100
         Net Value 3     20.12      USD     100
    VPRS     Cost     27.22      HKD
         Profit Margin     16.61      USD
    The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
    Thanks and regards.

Maybe you are looking for

  • SSO implementation from SAP EP to non SAP application (JAVA Appln)

    I want to implement the SSO from SAP EP to java application i.e. on oracle 10g application server. For this i have downloaded ssoexample with relevant libraries and jsp aswell as java file. But where i need these files to be placed in java applicatio

  • Making the first letter of every word a capital

    hello CF oracles could you guys please advise me the best way to make the first letter in every word of a string a capital letter. (and make all the other letters lower case). eg. convert "the quick brown fox" into "The Quick Brown Fox" or convert "T

  • How to detect duplicate for custom object 1

    Hi expert, are there any fields in custom object can detect duplicates If These Fields Match? we thought it should be "Name" but it's not. Thanks, sab.

  • Common 'Green Screen" problem when trying to view videos in iTunes

    I love the show "Surface" on NBC so I decided to download the first pilot episode #101 to iTunes for Windows on my computer. When I go to "full screen" mode to watch the program it goes to a "green screen" washout that is common when Quicktime is ins

  • Get the names of all tables

    First I want to tell you: I'm a amateur concerning Java Programming. My task is to write a java program - using JCO -, which retrieves the names of all tables (a user can access). Can anybody help me, please?