Conexant HD20672 SmartAudio CRITICAL Issues!
Hi all
I discovered bugs while testing and writing a full guide to optimize sound with SmartAudio (Clean Install after clearing out Dolby + Windows High Definition driver). Tested out with 8.32.23.0 / 8.32.23.2.
The clips is under the attachment. The problem lies with the SmartEQ (probably 31Hz and 62Hz to be precise).
1. When you change back to Default EQ from Custom, the power limiter seems to lost control. (e.g. In the attachment)
Pros: This shows the hidden potential of the powerful sound (output level), it was so loud (louder than any laptop i heared) when the bug occurs.
Cons: The sound was so distorted that it could possibly damaged the onboard sound card or / and the internal speakers.
2. If you increase 31Hz and 62Hz band
Pros: The sound would be louder
Cons: The microphone quality would be very poor (eerie sound cames out)
Could anyone replicate this issues with any ThinkPads (X, T, W#20s/i/t) with Conexant HD20672 Sound Card? Currently, I am on hold for writing pdf guide for SmartAudio optimization. If it can't be fixed, I can't proceed any further. (hard to have great results with buggy drivers)
I apologize for any affected users that uses my Conexant tweaks under my old W520 Sound Enhancement Thread (Conexant part). I should have done more testing on the mic to be sure everything works perfectly. I would suggest users using Conexant to avoid using SmartEQ.
I am back to Dolby drivers for now. I would suggest next batch of ThinkPad changing to Realtek, IDT or even Creative for both quality and reliability purpose.
Cheers
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...
Attachments:
V0029_08-12-11.rar 2504 KB
Yup, affects both input and output. From my findings, 31Hz and 62Hz on high level causes whine issues during Skype (causing poor quality). I am not sure why did it happened. This does not occur on any previous ThinkPads or ThinkPads with Dolby drivers.
By the way, are you all able to reproduce any of the following? I doubt it's hardware (onboard sound card) fault.
Thanks
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...
Similar Messages
-
Delay while recording with conexant 20561 smartaudio hd
Hi!
I have a T500 20893PG, and I use the conexant 20561 smartaudio hd front port to record audio. But it lags a lot! I've tried to update the driver, but I already had the newest one. It's up to 1 second lag, and that's waaaaay too much for me.
The Windows 7 audio driver troubleshoot didn't help neither.
What to do?Hi all
There are few causes and solutions to this problem. From what I know, SmartAudio limits the power of the devices to very minimal to prevent unnecessary damage.
1. If the problem is exclusively caused by Skype.
Go to Skype, log in. Then go to Tools, Options, General (Audio settings tab),
Uncheck: (They are enabled by Default)
- Automatically adjust microphone settings
- Automatically adjust speaker settings
2. If it affects overall
Go to Control Panel, Sound, Communications tab
When Windows detects communications activity: Choose
- Do nothing
Hope this resolve your issues.
Cheers
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62... -
Conexant 20561 Smartaudio HD and 4 speakers
I have W700ds what should have Conexant 20561 Smartaudio HD. I run Win7 64bit and I'm wondering if the official software and drivers support for 4 speakers? Sometimes the audio cards support mode where for example the "mic" jack is disconected and the "rear pair" of speakers can be connected to it.
Mi problem why I'm asking is that I had many issues with the software, mic quality, audio out post processing and found out that when I leave the generic windows drivers it works much much better than the manufacturers software. And I'm affraid I won't able to undo the changes so I would like ask here before I install it.
Having support for 2 front speakers and 2 rear would make it worth to install it, but if it's not supported I don't want to taint my system with the software.
Could somebody tell me who has the coneaxnt sotware running?
Thank you Anton.
Solved!
Go to Solution.I'm pretty sure the Conexant chipset doesn't have that feature. I could be wrong.
You'll probably have to use an ExpressCard or USB sound card with SPDIF or multiple speaker outputs.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Simultaneous read and write to a cube - critical issue
Hello xperts,
I am facing a critical issue.
I have Cube A which has loads of data in it. I need to take the data of CubeA to a new CubeB as a backup purpose.This activity will take a lot of time.
Concern1 - In the night we have the master data job which runs including the attribute change run job. Will this have any effect on the load happening from Cube A to Cube B.
Concern 2 - After master data job finishes in the system , we then run the transaction data jobs which would update Cube A with the delta data. Now the issue is can this delta load happen to Cube A while there is data load going on from Cube A to Cube B??
Please help me out with this ASAP.
Thanks & Regards
RohitRohit,
Attribute change runs will get affected only when you drop or rebuild the indices - this activity locks the cube - any activity that locks the cube will affect attribute change run - reads on a cube will not lock the cube.
However when you are loading data into your new cube - you cannot load data into the cube - for the very fact that when you load data into the cube - you will drop indices - this will affect the data load into the new cube.
Arun -
Critical Issue - 500- Internal Server Error for request in User's Inbox
Hi,
We have developed and deployed SOA composite and custom task flow (For Customized Email notifications).[30.7.1.1 Creating a Task Flow with a Router - http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_designtf.htm#SOASE744]
When a request is generated it goes for an approval. In Approver's inbox in identity console you can see request is pending. When Approver clicks on that link to see request details error is displayed - "500- Internal Server Error "
In OIM logs I can see this:
oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml'.
at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:466)
at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:367)
at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:179)
at oracle.adfinternal.controller.metadata.MetadataServiceImpl.getTaskFlowDefinition(MetadataServiceImpl.java:209)
at oracle.adfinternal.controller.util.SecurityUtils.invokeURLAllowed(SecurityUtils.java:33)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:210)
at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:831)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml"
at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1408)
Screenshot of Error in Inbox:
This is critical issue for us and is showstopper for Go-Live. So any kind of help is highly appreciated.
Thank you,
TanmayIf its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy -
Critical Issue: Availabilty check & alternative BOM selction issue
During the upgradation project I'm working facing the following critical issues:
1)While creating the sales order, system carries out the availability check in APO.In material master checking group Z5 is defined.
Actually I want to know hw the system carries out the search in APO & what are the settings in R/3 or APO we have to make?
2)Suppose there are 3 alternative BOM's of a finished product.A requirement is while creating the sales order availabilty check should be carried out & system should check the availability of components on the required date.If the component is not avalable system should go & check the second alternative...third alternative until it gets the confirmation of component availability.
How we can set this functionality & what are the prerequisites or customisation settings we needs to make?
Would appreciate providing your inputs on this critical issue.
Thanks,
Nilesh<b></b>Before you understand how the APO Availability Checking concept works, I would suggest you understand about the regular R3 availability checking. As this is the core for the SD and APO GATP. Refer help.sap.com
Question 1:
<b>Settings in R3:</b> You have the ATP integration model in CFM1 transaction. You need to activate this just one time and never again. what this does is basically transfer all your availability checking customizing to APO.
All the settings for the Availability Checking group ( Z5, etc) are already maintained in R3 and they get transferred to APO by the integration model. You donot need to anything else.
<b>Settings in APO:</b>
If you are using <b>Product Allocation Concept</b>, You have to maintain the Check Instructions.... Otherwise there are no other settings in APO
<b>Availability Check in APO :</b>
( see the following blog for the requirements class( Name in R3) or check mode( Name in APO) determination http://solution-timezone-issue.blogspot.com/ )
The check mode and the business event( These are hardcode internally in R3 - For SD- A) are determined from the order and based on this in APO it follows the following order
(1) Reads the check instructions settings in APO
For example say the following have been determined from the SD Order : Check Mode 041 and Business Event A
Say we have maintained in APO that the first step is Availability Check and all the other two steps we havent maintained or left blank ( Product Allocation and Forecast)
Look for the customizing in APO
SPRO>APO>GATP>General Settings>Maintain Check Instructions ****
(2) Carries out availability Checking same as in R3 and no different
From the masterial master considers the availability checking group ( Ex: Z1) and the business event( SD transactions- A)
Very Important and the core of availability checking which is similar in R3 and APO***
Against these 2 combinations, the settings are checked which define what stock and in/outward movements are to be considered during the availability check
For customzing settings in APO
SPRO>APO>GATP>Maintain Check Control>
For Customizing in R3
SPRO>Sales and Distribution>Basic Functions>Availability Check and transfer of requirements>Availability check with ATP logic or planning>Carry out control for availability check
This is the answer to your first question.
Your second question would need some time and I will try to answer it as well.
Hope this helps you.. -
In testing 9 and X, "Compare Docs" we have a critical issue and really need help!
For years we have used Acrobat 7 to do PDF compares and we love it! However, the company recently advised we must upgrade to 9 and then eventually to X. In testing 9 and X, Compare Docs we have a critical issue and really need help. Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs; however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running! Version 7 runs the compare of the same PDFs beautifully, pointing out all the differences, as usual! Has this every happen to anyone? Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results? Why is 9 treating these non-scanned PDF docs as such? Thanks so much for any help or insight you can give me on this issue!
(Moved the discussion to the correct forum)
-
Critical Issues During SAP Implementation or After Golive
Can anybody tell me one of the most critical/ challenging issues During SAP Implementation or After Golive
in these modules:-
MM implementation
PP implementation
SD implementation
FI/CO implementation
PS implementation
QM implementation
HR implementation
BI implementation
XI implementation
Thanks and regards
RShi,
I will list out few of critical issues in
Implementation :
1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
2. Unit & Integeration testing should be through with all validations
3. Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
4. Check tax procedures are customized according to requirements.
5. Complete all print document customizations before go live
6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
cancellation/reversal of documents after post go live)
7. Ready with standard MIS reports & customized reports for business decision making
8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
9. Check all tables datas are updating correctly
10. Declare go live to SAP Support
11. Check All user authorization should be correct according to their roles.
12. Centeralize all master datas creation(avoid duplication)
13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
14. Ensure document numbering is completed for all documents
15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
After Go live :
1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
3. Identify there is enhancements to be done in transaction process(By step-2)
4. Prepare a list of month & year end activities to be performed for all modules give to users
5. Prepare a list of frequently used transaction codes module wise give it to users
6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
7. Train the users,take reports in respective modules.
8. Additonal customization might be done in print documents.
9. Instruct users/CTM's to adapt SAP Standard practise
10. Update excise tax rates after every indian budget
Hope it helps.
Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM -
Hi, all can any one send me some critical issues related to crm marketing and internet sales and basecustomization. Plz send urgently.
thanks in advance
[email protected]Hi Vasanth,
If you want to see the issues related to Marketing or Internet Sales.
Just click on Search forum in SDN as Marketing or Internet Sales you can see the related issues questioned by various consultants.
Regards,
Johnny. -
hello
please any body send me some critical issues and their solutions which u faced in support desk. please kindly sent me its urgent
thanks in advance
guru
[email protected]Hi Guru
All the questions posted in the forum are practical issues only . You can select some of them sub module wise and present them to the interviewers.
Good luck -
Can any one share with me any two critical issues in DP support project
Hello friends,
I am new to DP support project in SCM5.0 version,can any one share with me my queries
1.what is my support rolles and responsiblities .in DP
2.can any one share with me any two critical issues in DP and how can you resole itHi Sivaram,
1. As a DP functional consultant you need to resolve all the incidents raised in APO DP module( Forecasting, lifecycle planning, master data in APO DP, Planning books, macros , release to APO SNP or R/3 or other systems, CVC maintenance etc) which will also include BW part of SCM -APO related to DP, like data extraction and back up into and from infocubes. You will also support all the interfaces realted to APO DP , for the APO related part of the interface.
You need to reoslve these incidents in the time frames defined by SLAs for the support project.
You will have to also carry out problem management of some of the critical incidents so that incidents do not re-occur.
Further you will have to support Release /Change managment support( if it is part of your contract of Support project).
This willl involve testing changes in quality system, before these are moved to production system.
2 I found 2 crtical issues in APO DP support as below:
2.1 Sales history extraction data interafces from BW system used to have problems : technical problems of interface / jobs in BW running late, functional problems: sales history extract in BW not correct because various reasons
This used to lead to delayed job runs in APO and finally delayed forecasting and ptehr DP processes .
By proactive monitoring by BW team and taking appropriate actions for master data issues, this issue occurance frequency was reduced , but not completely eliminated.
2.2 Another major issue was related to back up process of APO DP planning data into infocubes. Finally by splitting the jobs as per daily, weekly and monthly bakc up procedure , we were able to resolve the issue.
I hope I have answered your queries.
Pleasse check and confirm.
Regards
Datta -
Can u please give me two critical issues in app
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
can u please tell me two critical issues in app and explain me how i can solve that critical issues.
and also tell me two critical issues in account receivables or g/l accounting and explain me how i can solve that critical issuesThere are no refunds.
You can try contacting itunes support and asking for an exception:
http://www.apple.com/support/contact/ -
As FI consultant, What are critical issues with other Functional Consultant
Hai, Masters
Can you express about Critical issues with other functional consultant with exmples
Regards
Ramesh KHi Ramesh K,
I think the critical issue should be the definaition cross application should be consistency( Ex in FI, CO, MM or SD).
And the Main issue is the result updated from FI to other applications or from other applications to FI is correct or not!
With Best Regards,
Gladys Xing -
Material Determination - Critical Issue
Dear Friends,
We are using material determination automaticall
The reason for substitution here is non availability of stock of ordered material, because of which system seeks the stock of substitute material.
The way we have configured is: When material is entered in sales ordered, system check stocks of entered material, if available partially provides the available stock & seeks for substitute material, where even if partial stock for substitute material is available, one more line is created for this material.
This line created as a sub item (like in sales BOM). Futher even after seeking substitute the order quantity is not fulfilled one more line is created for the original ordered material with a backorder tick.
The order items look as under:
10 000000000005893343 50.000 EA Cover
11 000000000005893343 9.000 EA Cover
12 000000000005893653 3.000 EA CYLINDER HEAD
13 000000000005893343 38.000 EA Cover
10) is entered item.
11) entered item available stock
12) substitute item available stock
14) unavailable backorder stock for entered item.
At this point of time we can deliver the order items 11 & 12 with further processing.
But later when we upload the stock for entered item, availability check cannot be carried out in the order, since all the items become grey out, when we create first delivery.
This is a very critical issue in our case.
Please suggest soon as possible so that we crack the issue.
With Best Regards
Nate.
p.s. This Question is posted old ago by Dhananjay. But The solution no exist.
(reference)Material Determination - Critical IssueDear Friend.
Thank you for your help.
All the items become grey out after we create first delivery.
So i should be just click on item availabilty, but it doesn't run.
<Step>
1. Material determiantion setting : A(highItem) - A(subitem) - B(subitem)
2. Material stock A : 10 ea, B: 10ea
3. Sales Order Creation : Material A 25 ea -> A 10 ea Confirmation, B 10 ea Confirmation and 5 ea Open, S/O No. QQQQ
4. Deivery Creation : Material A 10 ea , Material B 10 ea Delivery, G/I and Billing
5. Material B 5 ea supplement
6. Sales Order QQQQ Material B : re ATP carry out. But Don't run. All the Items become grey out.
Regards
nate. -
Silent install Conexant 20672 SmartAudio HD
Conexant 20672 SmartAudio HD
Driver 8.32.23.0
Target OS:
OS Win7 SP1 64bit
Models:
T520, T240 and X220
I'm trying to install the driver through SCCM. Driver packages (inf file install).
After installing and reboot when a user logs on they get prompted to enter administrator credentials!
which they don't have....
I've also creating a sccm package that runs the installer with "setup.exe -s" as noted in the readme file.
This results in error code 1024.
If I try to install the driver again it succeeds but after restart and log on users get prompted for admin credentials
Its the same result on all 3 laptops (T520, T240 and X220)
Manual install works though...
Anyone have some hints?
Solved!
Go to Solution.This is due to the driver being installed in system context (without logged on user). As soon as a "physical" user loggs on to the system the audio driver wants to access the registry and document its completion status (0 = no error). If an Admin logs on the first time after installation, the message won't pop up.
To get around that you might want to try this:
Please add the following "Run Command Line" command into your Task sequence, which must be run after the main Audio driver installation. NOTE: It does not need to run immediatelly after the audio driver installation. However, it cannot be started prior the audio driver installation. You can run this command also on the far end of the whole Task Sequence.
REG ADD "HKLM\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSYS_17AA21CF&REV_1000\4&21ecbeb0&0&0001" /v "ConfigFlags" /t REG_DWORD /d 0 /f
That should give you peace of mind ...
cYa ... Dirk©
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
As money not spent, won't make anyone richer
so knowledge not shared, won't make anyone wiser.
... and no, I'm not working for DELL
Maybe you are looking for
-
Cannot print to Adobe PDF printer from Word after upgrading to Win 7 64bit
Hi. After upgrading my operating system from Windows XP to Windows 7 64 bit, I can no longer print to the Adobe PDF printer (e.g. from Word). It just sits in the Adobe PDF printer queue saying "Error" without bringing up the "Save As" dialog box, and
-
Itunes on windows 7 pc not responding
What can I do about itunes on windows 7 pc not responding?
-
How to set up Express as a relay wireless base station ? System: Yosemite
How to set up Express as a relay wireless station ? OS: Yosemite. Airport utility: 6.3.4 Base station: Extreme, connected to modem. Configured as "create a wireless network" Remote stations: Express, connected wireless as "extend a wireless network"
-
I'm getting a general error message then out of memory trying to add a new sequence
Anyone know how to fix?? i am getting a general error message and then out of memory when adding a new squence?? Help!
-
FIFO Inventory valuation without Balance Sheet Valuation
Our business wants to know if they can have real-time FIFO inventory valuation; At a give point, When we perform and update the material prices through the Balance sheet Valuation - FIFO procedure; system automatically revaluates the inventory at FIF