Conference call and get disconnect tone

Hi,
I had a issues as below:-
Now have 5 party in conference call, 2 from internal and 3 call to PSTN's user. Suddenly one of the PSTN user call are drop then the remaining user in conference call are hearding the disconnect tone for few minutes. May I know how to shorted the disconnect tone or totally no disconnect tone after the PSTN user disconnect? Please let me know how to solved this.
I using CUCM 6.1 and conference station 7936.
Thank you.

Hey! Most likely it is an engineering issue, should be fixed soon with the newest update.
Check this related thread: How to add caller to Facetime audio call in ios8?

Similar Messages

  • HT4245 i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number.  Since you can't make calls on the Mac.

  • Can I hold an audio conference call and record it ...

    Can I hold an audio conference call and record it on Pretty May Call Recorder?Thanks!

    My solution was to store the thread reference.  At any step, I can retrieve the current context.  This is only valid within a thread, but meets my needs.  I could also pass something at a higher level, but that would require knowing which thread I am interested in anyways.

  • Network coneccting and getting disconnected after one or two minute

    I am using Vodafone carrier i have problems with network .
    My network is getting coneected and gets disconnected within one or two minutes. what should i do .
    please suggest some of the steps

    Check your computers time and date are correct, and updating to your location via Apple's servers.
    WiFi, Internet problems, possible solutions

  • I noticed that Phone call, is getting disconnected often while on the wheel.

    Any one have noticed this problem while using your iPhone:
    While you are travelling (on the wheel) and attending a phone call, while your the cell phone receives signal from telecom network tower to tower, your phone call get disconnected automatically. When you look at you phone, it shows there is no network and after sometime (about 2 to 4 Seconds) phone receives signal back.
    I am using iPhone 3GS model with iOS 6.1.3 (10B329). I thought this would be my phone problem but when I asked my friends and colleagues (they are using iPhone 5) and they said that even they are facing this issue.
    Another issue: Today we (a group) in a club house. We kept 3 iPhones, 1 Nokia phone and a Samsung phone in a line. iPhone receives only 1 network tower (3G) while both the phones (Nokia and Samsung) receives 4 towers out of 5.  Where we all use the same network provider (Corporate connection).
    Then what we 3 did is we Switched ON the Airplane Mode and after a while switched OFF this mode. After that iPhone start to receive the full signal.
    What is this PROBLEM in iPhone ? What about you (iPhone users) did you face this problem ?
    What is the solution ? Any answer ......

    It sounds like the vibration motor on your iPhone has failed and will no longer vibrate.

  • Call is getting disconnect after 3 min when the caller is in queue

    Hi,
    I am using icm 7.0 with ip ivr 7.0. when all the agents are busy and caller is in queue,call is automatically getting disconnected after 3 min with the message " We are experiancing system problem and unable to process the call. please try again later" .
    Icm and ivr script are attached
    Regards,
    Dinesh Joshi

    Hi Chrish,
    you are right. the timer was for 180 sec only. now things are working fine after increasing the timer.
    Thanks a lot for your reply.
    Regards,
    Dinesh Joshi

  • How can I merge conference calls and hang up on one of the instead of both on iOS 8.1.1

    How can I merge phone Calls and make conference calls with iOS 8.1.1 and hang up on one instead of both of them , it's not giving me an option like before on iOS 7 ?

    The following from the 8.1 user manual (http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf) may help
    Create a conference call. While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference.
        Drop one person: Tap  next to a person, then tap End.
        Talk privately with one person: Tap , then tap Private next to the person. Tap Merge Calls to resume the conference.
        Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls.

  • Number of concurrent a/v conference calls, and its bandwidth consumed.

    I have two central sites and multiple branch sites. Each central site has one Front End pool. we are planning to replace Lync 2013 servers for hosting meetings, conferences ( audio, video and web)
    My manager wants to know the number of concurrent audio/Video conference calls that our Lync Front End pools can handle and the bandwidth consumed by these calls. Can anyone here help with this or point me to where to find the right tool. I have tried using
    Bandwidth calculator, it was not working well for me. 

    For Audio, assuming G722 (without FEC) it will be about 96Kbps per stream. So in theory that would be
    over 1000 calls on 100Mb, however that doesn't take into account any other traffic that would be on the link.
    For H.264 Video it can be anywhere up to 4000Kbps (HD), but it's unlikely that all your end points would be running 1920x1080 resolution and they will all negotiate differently. So without knowing a lot about your environment I would say on average (which
    is just that between min to max around 50 video streams) or 128-250 streams at lower resolutions - so traffic through phones and slow connections (320x180-16:9/ 212x160-4:3 to 640x360-16:9/640x480-4:3) and
    25-50 streams at the higher resolutions. So HD cameras and rooms systems, etc. Once again not taking into account other things on the network.
    With regards to the pool themselves,  follow the hardware specifications required which you can check using the capacity planning tool http://www.microsoft.com/en-us/download/details.aspx?id=36828 the
    supported maximum however for a large conference on a single pool is 250 participants.
    As I mentioned it's almost impossible to give definitive numbers because there are so many variables, but hopefully this helps a little.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Casio Brigade rebooting in the middle of calls and getting more frequent.

    My Casio Brigade reboots in the middle of calls. It was usually preceded by a humming noise but it is happening more frequently and no longer hums just reboots. The battery is fine and has a normal life. The phone has never been dropped or wet (the Brigade is supposed to withstand both anyway). No, I do not have access to another phone so Verizon can tell me to reset it. I already reset and it didn't help. I programmed it again yesterday so it is up-to-date. Only reboots during calls (for now). Occasional dropped calls are expected but rebooting is not acceptable!
    Can anyone help?

    It is an awesome phone....if it worked right. I love the keyboard and the ruggedness of this phone. If only it wouldn't reboot in the middle of calls and/or Verizon had a solution that worked. It had this problem since day one and they had me reset it several times. It was OK for awhile. Then it started again but infrequently so I just lived with it. But now, it was every other call. I tried resetting it again several times and it is now out of warranty, of course. The last tech guy told me to uninstall all of the programs like navigator and backup assistant and THEN reset it. But it wouldn't let me remove backup assistant.
    Anyway, I am back on my old phone that I only stopped using because of the poor sound quality. But, I guess I'll have to live with it until my contact for the other phone is up. ... NEXT JUNE. I believe this to be a software issue.. The phone itself is probably great. Good luck.
    Oh, I also learned that it is more prudent to buy an unlocked dual-mode phone that accommodates both GSM and CDMA so that your phone will be usable if you decide to switch to another carrier. Verizon is about the only one using CDMA now. If you want a Verizon phone, get one that is "global ready". They have both modes. Hope it helps...

  • Conference Calls - Ending or disconnecting participants

    I can make a call and add a call successfully. The problem I'm having is hanging up or releasing one of the calls I'm on.
    The manual says select the "Conference" button and then "tap" the phone icon. Frankly, I see neither the Conference and only see the "End Call" button which hangs up on everybody. I'm sure I must be missing something - Suggestions ??
    iPhone 4 iOS 5.0.1 Verizon

    Hi!  I have the same problem with my Pre Plus.  Did anyone answer you?
    Thanks!

  • Trying to activate phone on pre-pay and get disconnected from *228 after 1 minute

    It says "congratulations your phone is activated" but I need to dial *228 Send to program the phone. I do this and I am disconnected after 1 minute. I have tried this a dozen or so times with the same result. I had my old number transferred and now I can't use that phone either. HELP!

        sjt6052
    I'm so sorry for the trouble getting your prepaid device to activate! We definitely want to make sure you're connected and running at 100%. While we only have access to Post Paid on this site, I would like to make sure you can get in touch with our PrePaid team. Is there another line you can call from? To reach our Prepay Team from another line, please dial 888-294-6804. When prompted, enter your prepaid phone number. Then press 4 (for questions or to change something), then 5 (for Store Locations or Billing Questions), then 4 (for Customer Service Rep) and then enter your pass code for your account.  If you do not know the pass code enter in four zeros. Then the system will transfer you to a Prepaid representative.
    RuthW_VZW
    Follow us on twitter @VZWSupport

  • I have an iphone that i have been waiting for 50 days for orange to unlock and keep getting fobbed off with promises to sort it out, i have made so many calls and getting really frustrated now. Does anyone know what the procedure is for an unlock

    I have an iphone that is locked to orange and have been waiting over 50 days now for it to be unlocked and keep getting fobbed off with promises to sort it out. I dont know how many calls have been made and am getting really frustrated now. Does anyone know how apple are involved with the unlock as  im jst not getting any answers from orange and they just keep saying they dont know why its takng so long

    If it is Orange Uk then no surprises
    They locked it originally and it is their gift to unlock ....usually in their own time.
    This is how it should work
    http://support.apple.com/kb/HT5014

  • Subscritptions unlimited calls and getting a skyp...

    i just recently reactivated by 1 free month of unlimited calls. 1st) I would like to know if the advertisements are correct. kype advertises you can  call  anywhere around the world ; to any Country unless specified not to. iI just did not want to be stuckk in one country . Am I allowed to call other countries with my unlimited calls?    (which I love)Thank you.
    2nd) I just went to get a SKYPE Number which it states i get 50% off but i can not find how much it is going to cost me. I am sorry to say they but Why hasn't any taken a look at  some the problems here.i see the same questions all the time, which tells me no one is signed to see into where the problems are what is wrong and if it can be fixed. Even your pages which are to help explain how to get started
    in using skype and other features of i can not find the answers or know where to go.And ihow in the heck to you people keep skype running when you have clean up and cleared out old paper work. I sure would like to be a part of help skype. As for me some customers are equipped. why can't we contact customer Service. It the most important job in helping customers. i can not find my way back to finish up with my skype number. Can you help or point the way? 

    AT&T just announced a $60 unlimited talk and text prepaid package. You are able to text to over 180 countries, but calling is still extra.
    Kyle
    Best Buy Mobile Specialist
    Super Six
    www.bestbuymobile.com

  • Losing connection during call and get no reconnection for hours

    Hi, I use my iphone4 (not iphone 4S) with ISO5 latest version. Since some weeks during calls I lose connection to provider and cannot reconnect to network. Restarting doen't help. After some hours the iphone get again connection not knowing what has happend. Losing connection happens while I'm on a fixed place (not travelling in a car or something similar) and making a call. It also happens at different places. Vodafone changed my SIM-card but it doen't help. I also backed-up and renewed the the iphone-software by using iTunes. The vodafone-support explained that with renewing the software a new software-patch will also be installed that should help. As you can imagine - I still have the problem! Who can help?
    Thanks for answering!

    #1 Did the problem start occurring after any particular weather event?
    #2 What light turned/turns red?
    #3 Do you have Voice service, and if so, do you have noise or static on the line while in a call that was never there before?
    #4 Lastly, visit http://192.168.1.1/ and visit the System Status section of the ActionTec. Provide the Transceiver Statistics it shows.
    If you need a login, try the following:
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    Your Verizon Username and Password
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Restoring from iCloud and getting Disconnected Half Way

    Hey,
    I am dispirit  for help here, my iPhone got stolen, and the first thing I did was lock it remotely, after that it dropped of the grid and disappeared.
    Anyway I bought a new iPhone and am trying to restore it from my iCloud account, everything works perfect however though my backup is only ~280MB in size the restore estimating time is ~ 3 hours. and from 6 tries already none of them succeeded.
    I keep on getting DC or dropped half way through, its always a different percentage and I am sure its not my internet connection.
    I tried to bench mark how fast the restore is downloading by calculating it from my router and it wasn't downloading very fast, infact it was very slow like 2MB each 5 min which was really strange cause my connection is 4Mbps and it never drops speed and the iOS on the device is already updated to 5.1.
    Now I don't know what to do, my backup is stored in the iCloud but I can't get to it , really depressed

    1. There is no indicators showing the state.
    2. Maybe caused by slow internet connection.
    Did you have a local backup instead,which should be more faster.

Maybe you are looking for

  • Problems saving as PDF

    Using the standard "save as pdf" option that is part of the OS X system, I can produce a pdf file, but none of the web links on the page will be active. I've tried it in both Word and in my web browser, and neither will make a pdf with active links.

  • When To and when NOT to use cursors

    Can anyone please refer to a good resource about When to and When NOT to use cursors. I have search on line but I haven't find anything really good. Thank you. H

  • Can I transfer My MSG to my PC so i can print them out 3GS phone

    I have a 3 GS phone and would like to transfer my MSG to My PC so I could print the out. Is this possable please.

  • Exception in two places of insert statment

    Hi All, I want to insert exception in two places in pl sql. I am getting the error.Is there a way to implement exception in two places in insert statement. Thanks, uday Begin Declare V_Code Number; V_Errm Varchar2(64); V_Code1 Number; V_Errm1 Varchar

  • Horizontal Scroll Bar Management InfoProviders

    Hi all, I see the horizontal scroll bar in management of InfoProviders only in some columns. Can anyone help me? Best regards. Simone. Edited by: Simone.Pompei on Feb 16, 2011 1:45 PM