Config changes caused by downloded updates

I recently loaded an auto sent update for Acrobat. As has happened beofer, it caused some sort of configuration changes in my system. I can no longer open links on websites or sent in e-mails. I get an ERROR message staing I cannot perform the requested action due to restrictions in my system. This happens everytime I load one of your auto updates.
How can I fix this.

Are you sure the update came from Adobe. It is always best to update the programs from within the program or going to Adobe>downloads>updates http://www.adobe.com/downloads/updates/ and getting the updates. I could be wrong, but when this much trouble comes up it is often a virus that you have gotten that was posing as a legit update.

Similar Messages

SAP BI System Copy with only Config changes, Not Data

Hi BASIS,
I have a requirement from a client to build a system landscape stratagy for their SAP BI system.
We have DEV - QA - PRD systems for SAP BI (7.0 SP 16)
Both DEV and QA are completely out of sync with PRD. We are doing development tasks directly on PRD. Now we have decided to re-sync the DEV & QA systems with PRD.
'System copy with Data' will be easier to implement. But our PRD DB size is nearly 3TB. The client is not ready to pay for the extra/temp. disk space for DEV and QA sync. ( We are on DB2).
Now, we have only one option left. Capture all Config changes from PRD and transport them back to DEV & QA. This is a tedious task and cause many inconsistencies.
Would anyone have any other ideas to bring the systems in sync with less time involved and less resources.
I am a SAP BI person. So dont know much about BASIS tasks. Please help me with any links of best practises or SAP notes.
Cheers

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

ISG - ASR1002 config change

Hi Support Team,
We have had two instants - when there was an outage on our broadband customer.
Our 'rancid' server was able to pick up the change in config on one of the BRAS - AS1002
Config change is attached below...this was removing and adding the configs as noticed by the Rancid Server.
Any assistance anyone can give in identifying the root cause will be very much appreciated as so far the ASR log has no indication that the change was manually done by any of our users.
- class-map type traffic match-any ISG_OPENGARDEN
- match access-group output name OPENGARDEN_ACL_OUT
- match access-group input name OPENGARDEN_ACL_IN
+ class-map type traffic match-any Empty-Class
class-map type traffic match-any L4REDIRECT
match access-group input name L4REDIRECT_ACL_PORTAL_IN
- class-map type traffic match-any Empty-Class
+ class-map type traffic match-any ISG_OPENGARDEN
+ match access-group input name OPENGARDEN_ACL_IN
+ match access-group output name OPENGARDEN_ACL_OUT
class-map type control match-all IP_UNAUTH_COND
match timer IP_UNAUTH_TIMER
We are looking forward to hear from anyone who can throw us some light into this 'strange issue'
Thankyou in advance,
RWaqa

Hi,
You can select particular absence/Attendance types in this table V_T554S_ESSEX ... based on selection in this table you can restrict entries in CAT2/ ESS portal.
Try this it may help.
Thanks

Adding failover ASA back after config changes on "primary" ASA?

I had a working active/passive pair of ASA5510's, and then I had to do a rush firmware upgrade, but didn't have time to do it on the secondary at the same time. Now I have made config changes and upgraded the secondary firmware to be the same, and wish to know if I plug it back in if it will think the secondary has the "correct" config or if it will know that the primary is newer. I disconnected the failover cable because it was complaining about version mismatches constantly.
Is it safe to add the secondary back in or is it possible it will be declared newer and overwrite the config?

Hi,
There should be no problem adding another ASA back to the network.
Here is what I just did (and what happened) on a rather big customer
A power fault broke Secondary ASA and it never booted up
A replacement device was aquired
The replacement device was
Updated to matching hardware setup (mainly memory)
Updated to same software (OS and ASDM)
Configured with its physical interface up with "no shutdown"
Configured with ONLY "failover" configurations (exact configuration ofcourse depends on your setup)
It was attached to the rack and powered up.
After boot every interface BUT "failover" was attached to the network (Dont necesarily have to do it in this order) and I checked that every single one was up.
After everything above was done I connected the failover interface and watched as the devices "noticed" eachother and the Active firewall copied its configuration to the new Secondary unit.
This was done in a factory environment and all went fine.
There should be no problems doing this though I personally still prefer doing the replacement by attaching a "blank" ASA with only Failover configurations.
EDIT: Beeing that I am always paranoid when doing anything like this, I had ofcourse saved the configurations to flash on a separate file for worst case scenario and was ready to boot the original primary unit incase it took in something it wasnt supposed to.
EDIT 2: In the case where you think the Secondary unit doesnt have the exact configuration of the Primary unit, you can issue the command write standby on the Primary unit to save/copy the COMPLETE configuration of the Primary unit to the Secondary. Think the "write mem" on the Primary unit only updates some changes you have made to the Secondary unit
- Jouni

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update.

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update.

My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.

My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it. My password doesn't work with the old email address. When I look for my old email address in the Apple ID support area it says that the ID doesn't exist. Help!!!

You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials. This deletes the account and your synced data from your device, but not from iCloud. Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.

Fixing bluetooth in windows 8.1 and changing the way windows update works

Hello, this is a message for Microsoft, can you please fix the Bluetooth in the setting in Windows 8.1. Because I can not connect my devices on it to play music. Also, my second suggestion would be for Windows update. First of all,
Windows tells me that it will install update automatically but It's not true. Everyday I check to see if there is an update on the pc. So change the way windows update works because It is a bit confusing. In other words, try to do like windows 7 if you
can, or if not It is not a big deal. But a least try to have a solution for this issue and the Bluetooth also.
Thank you.

Hi Ariel,
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
For help with using Windows please post in the appropriate forum for your OS on
http://answers.microsoft.com .
--Rob

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

Is there a way to find all config changes between clients and sap system

We have our Dev system with clients
310 - Developer make changes and create transport
400 - Test client
410 - a copy of our Production system (over 1 year ago0
TST - this is our quality system with one client
101
Production system one client
101
I know if i do a database copy from Production to our TST system, both systems would be exact.
Abaper Director wants to know all the configuration changes that are different between Devopment client 310 - Test and production.
I told him that in development client 310 the abaper or functional users make most of the changes if they do not get transported they would be missing.
I cannot copy to client 310 otherwise we would loose all of our version management.
Is there another way that I can see the config changes between all these clients.
Thanks
Joe

You should be able to use tcode SCU0
Regards,
Brian

Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link. Now Pages ask if I want to "Edit or Open" the link. Is this an option that I can turn or off or is this just a change with the latest update? Thi

Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link. Now Pages ask if I want to "Edit or Open" the link. Is this an option that I can turn or off or is this just a change with the latest update? This only started in the last six months or so.
iWorks "09" Pages ver 5.2

Use Pages '09 which should still be in your Applications/iWork folder.
Peter

ACS will not save the config changes to reports

I have configured a very old ACS appliance, 4.1. At this time this is what I we have to use. The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config changes that are being made.
I'm hoping that someone may have an idea of what accounting command I am using or if this older version has some changes that need to be done as the config/aaa lines I use today and work on newer version work. I was under the impression that this line "aaa accounting exec default start-stop group tacacs+" would send every command to the tacacs server?
aaa new-model
aaa authentication login default group tacacs+
aaa authorization config-commands
aaa authorization exec default group tacacs+ none
aaa authorization commands 0 default group tacacs+ none
aaa authorization commands 1 default group tacacs+ none
aaa authorization commands 2 default group tacacs+ none
aaa authorization commands 7 default group tacacs+ none
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
any ideas would be3 appreciated. thanks for reading
Yvon

Hi martijn,
Are there some custom fields in this list or some duplicate columns? Please have a check.
For more information about the possible reasons and solutions, see
http://social.technet.microsoft.com/Forums/en-US/sharepointcustomizationprevious/thread/ae946f73-3126-41ad-833b-25e4cc2b7723#e22af3fe-8203-45c4-8d19-e18041a048e2
http://social.technet.microsoft.com/Forums/en-US/sharepointgenerallegacy/thread/59895a6b-7f61-431f-a762-e3fd9d81fe34
http://social.technet.microsoft.com/Forums/en/sharepointcustomizationprevious/thread/eba4cd7e-498a-465f-adea-decae44d7a8c
Regards,
Kelly Chen

9i jdbc driver change causes problems

Hello all,
I was wondering if anyone had any problems with jdbc when migrating to oracle 9i. We are using timestamps from java which were mapped to dates. In oracle there is a function which takes a date. Now this won't work anymore as the mapping changed. Question is, did anyone use the V8Compatibility flag before? I tried it and it doesn't seem to work. When looking at the jdbc implementation it seems to me that something is not implemented yet.
Any feedback?
Thanks in advance,
Rein

9i jdbc driver change causes problems

HT3500 How can change apple ID for updating of programs

How can change apple ID for updating of programs?

You need to delete them and then download them from the desired Apple ID.
(85684)

Aperture 3.1.2 no more stores imported pictures in projects. Downloded Update 3.2.2 cannot be opended. Actualisations only via Mac App Store. Is there a way via Internet-Download?

Aperture 3.1.2 no more stores imported pictures in projects. Downloded Update 3.2.2 cannot be opended. Actualisations only via Mac App Store. Is there a way via Internet-Download?

In the Window 'About Aperture' is below the Version: a No: 1530000.1
Are you looking in the "About" panel of your old Aperture installation or the Trial? The old version will show the licence number, if it has one. After installing a different version this chance is gone.
I bought Aperture 3.1.2 on March 2011 in the internet App Store.
If you bought from the App Store and not the Apple Store, your Aperture version has no serial number. Are you sure, you did not buy from the Apple Store? Then you should have received a serial number by email.
Can you give me a serial No
No, sorry I cannot. The serial number is bought with Aperture and only licenced to the person who bought it.

%ONLINE-SP-6-REGN_TIMER: multiple line cards down after config change

Hi,
I was wondering if someone could help.
I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understand how module 7 and 8 can go down on both switches. Initially I thought it maybe due to IOS bug 22-33.SXI2a.bin" so I upgraded it to s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin but it still down.
These are the actions I have carrried out to try resolve the issue:
- Reverted back to orginal configs but no luck
- Tried to use "power enable" command but the status light on both modules seems to turn red and then go off again.
- I have also tried to put one of the fibre modules into a different slot but no joy
- Upgraded the IOS from 22-33.SXI2a. to 122-18.SXF12a
I am running out of ideas.. can anyone help ? I am sure that hardware fault cannot occur on BOTH modules 7 & 8 on BOTH switches after config change.
The error in the log shows that modules "failed to bring online because of registration timer event". I understand this means that it is unable to download the image within the allocated time.. maybe I could manually copy the image onto the line card if that is possible ?? any ideas ?
Daughterboard         WS-SUP720          SAL135063V2 4.0    Ok
7 Centralized Forwarding Card WS-F6700-CFC       SAL1419HKJK 4.1    PwrDown
8 Centralized Forwarding Card WS-F6700-CFC       SAL1419HAG0 4.1    PwrDown
Mod                                                      Hw    Fw           Sw           Status
7 5475.d016.075c to 5475.d016.075f   3.1   Unknown      Unknown      PwrDown
8 5475.d0bb.7404 to 5475.d0bb.7407   3.1   Unknown      Unknown      PwrDown
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin"
BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin,12;sup-bootdisk,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
May 28 17:25:10.352: %C6KPWR-SP-4-DISABLED: power to module in slot 7 set off (Module Failed SCP dnld)
May 28 17:25:10.452: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
sm(cygnus_oir_bay slot8), running yes, state wait_til_online
Last transition recorded: (disabled)-> disabled (disabled)-> disabled2 (restart)-> wait_til_disabled (timer)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
May 28 17:25:10.452: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
May 29 11:41:16.601: %SYS-5-CONFIG_I: Configured from console by console

Would anyone know if the line cards are maybe failing due to Embedded Event Manager configuration ? The person who configured this lab has left the company so I am not sure what the EEM configurations actually mean.
The reason i am suspecting the EEM configuration is because the error in the log seems to suggest the module failed due to registration timer event.
May 30 14:47:00.366: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
Just trying to check all the possibilities as I have tried everything else,
event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.x.x/xxx/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60 event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.216.145/FCPD/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60

Config changes caused by downloded updates

Similar Messages

Maybe you are looking for