Configration failed
Failed to create Sample Data
An exception of type System.Data.SqlClient.SqlException was thrown. Addition Exceptional information:
Cannot open database "User Profile Service Application_ProfileDb_90a125----------------"
requested by the login. The login failed.
Login failed for user 'WIN-90-----\Ashwin'.
Hello ashwinbalaguru,
Like Alex already stated, can you give as some more information? Are you building a new SharePoint farm for instance?
Btw. The errors look a lot like the ones in this thread:
http://social.technet.microsoft.com/Forums/en-US/87474c68-ea9f-4523-85f1-c609419aa79c/sharedservices1-default-provisioning-failed-cannot-open-database-?forum=sharepointadminlegacy
Hope this helps a bit.
- Dennis | Netherlands | Blog |
Twitter
Similar Messages
-
Listner_problem_configuring_for_2_databases
hi all,
I have installed a local database (10g) in addition to tns configuration of R12 suite. (with back end of 11g).
The listner of my local database does not operate. I cant reconfigure it mannually nor via net configuration assistant, infact i m even unable to load net configuration assistant. I tried to re-install my operating system (win xp sp3), even then the problem persists i.e. net configuration assistant does not load and mannual configration fails too.
i want to develop some forms using my own local database actually.
please help me at this.
regards
~shabbirHello shabbir,
it seems like you've posted to the wrong forum, as this one is dedicated to APEX Listener, a web server alternative to host APEX.
Please mark this thread as answered and post again in {forum:id=61}
Thanks,
Udo -
The error "configuration system failed to initialize" occurred
Hi
When I converted and built the solution file that was developed by Visual Studio .net 2003 using Visual Studio 2005, the application program was abnormal-ended at the following step:
m_TCPChannel = New System.Runtime.Remoting.Channels.Tcp.TcpChannel(tcp_properties, Nothing, Nothing)
The error message was "configration system failed to initialize". The Exception.ToString said that the root <configuration> tag was not included in the configuration file. Therefore, I changed <configopt> tag to <configuration>
tag in the app.config file of the target project, and then executed again. Next time, the application program was abnormal-ended by the unrecognized section <xs:schema>. Therefore, I changed the app.config file to the simple one (only <configuration>
and </configuration> tags), and then executed again. The error didn't occur. I guess that it's caused by configuration settings. Please advise.
app.config file:
<?xml version="1.0" standalone="yes"?>
<configopt>
<xs:schema id="configopt" xmlns="" xmlns:xs="URLリンク" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="configopt" msdata:IsDataSet="true" msdata:Locale="en-AU">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Environment">
<xs:complexType>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="0" />
<xs:element name="System" type="xs:string" minOccurs="0" />
<xs:element name="DataLibrary" type="xs:string" minOccurs="0" />
<xs:element name="Default" type="xs:boolean" minOccurs="0" />
<xs:element name="UserId" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<Environment>
<Name>Test</Name>
<System>XXXX.COM</System>
<DataLibrary>XXXTEST</DataLibrary>
<Default>false</Default>
<UserId></UserId>
</Environment>
<Environment>
<Name>Production</Name>
<System>XXXXX.COM</System>
<DataLibrary>XXXPROD</DataLibrary>
<Default>true</Default>
<UserId />
</Environment>
</configopt>Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Since your issue occurred on the converted project from VS .net 2003 to VS2005, and VS2005 is out of
our mainstream support , I suggest that you should consult on some development forums to check whether they will to provide some suggestions or
submit a support ticket to below site,
https://support.microsoft.com/oas/default.aspx?Gprid=1117&st=1&wfxredirect=1&sd=gn&wfxredirect=1
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HP laptop update failed, and now it wont stop undoing changes.
When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?
You can try getting to Advance Boot Menu by
1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
2.Shift and F8 (When the first options doesn't help at all )
then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost )
Please update here if there is still any problems -
User equivalence check failed for user "oragrid" in HP-UX
Dear Friends,
while cluster verification utility i gotthe below error.
$ ./runcluvfy.sh stage -pre crsinst -n aeadsverp11-adp.adp.ae,aeadsverp12-adp.adp.ae -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "aeadsverp11-adp"
Destination Node Reachable?
aeadsverp11-adp yes
aeadsverp12-adp yes
Result: Node reachability check passed from node "aeadsverp11-adp"
Checking user equivalence...
Check: User equivalence for user "oragrid"
Node Name Comment
aeadsverp12-adp failed
aeadsverp11-adp failed
Result: PRVF-4007 : User equivalence check failed for user "oragrid"
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
I had configred ssh and scp on both nodes.
$ ssh aeadsverp11-adp.adp.ae date
Wed Sep 28 04:26:55 MDT 2011
$
$ ssh aeadsverp12-adp.adp.ae date
Wed Sep 28 13:28:26 WAT 2011
ssh is wrking fine without any issues on both nodes.
Please advice.
Thanks,
RajendraHi,
Just ignore it and proceed with installation.
Its an bug.
Kind Regards,
Rakesh -
Processing data base failed: Cannot connect to data source
Hi,
I have deployed my SSAS project to an Analysis services database on a SQL 2014 server instance using the "Development" build configration in Visual Studio. In order to avoid users accessing the development instance of the cube, I've created
an additional "Release" build configuration and deployed my project to a different database on the same server. I've also created a production copy of the data source and changed the data source configuration of the production cube to point to this
one.
I've provided the same domain service account on the "Impersonation information" tab of the data source for both the development as well as the production instance of the cube. This account has also been granted identical permissions for both data
sources. While everything works fine with the development database, processing the production database fails with an error message saying that it cannot connect to its respective data source.
I'm using VS Ultimate 2013.4, SSDT 12.0.50318.0. Any hints pointing me in the right direction are appreciated.
Many thanks
AndreasHi Andreas,
According to your description, your production cube can't connect to data source when processing. Right?
In this scenario, if both cube data sources are pointing to same source databases, both connection should work proerly. Since you created a copy of data source for your production cube, please make sure your type the right server name and test connection
in your project. If you can connect successfully, I suggest you only keep this data source for your production project. If the issue still persists, I suggest you import the development database into a new project and save this one as your production database.
If you still have any question, plesse provide some more information and share some screenshots.
Best Regards,
Simon Hou
TechNet Community Support -
I am using Cisco1941W.
When I connect CliantPC to Wireless(1941W) I got bellow massage from 1941AP.
"%DOT11-7-AUTH_FAILED: Station 0011.f596.eecb Authentication failed"
And I couldn't ping from my PC to AP and Router.
Its possible communication from AP to Router.
I show 1941AP configration.
Could you find wrong?
By the way, my PC connected to AP by 108Mbps.
But my PC supported only 802.11a/b/g .
My PC use Static IP Address and use TEST-2 ssid.
I couldn't find error from my PC.
(start)
hostname TEST
enable secret test
aaa new-model
aaa group server radius rad_eap
server 10.73.12.2 auth-port 1645 acct-port 1646
aaa session-id common
dot11 syslog
dot11 ssid TEST-1
vlan 100
authentication open eap eap_methods
authentication key-management wpa
mbssid guest-mode
dot11 ssid TEST-2
vlan 200
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii testtesttesttesttest
dot11 aaa csid ietf
username Cisco password 7 05280F1C2243
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
no shut
encryption vlan 100 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
ssid TEST-1
ssid TEST-2
mbssid
antenna gain 0
station-role root
interface Dot11Radio0.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
no shut
encryption vlan 100 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
ssid TEST-1
ssid TEST-2
antenna gain 0
no dfs band block
channel 5180
station-role root
interface Dot11Radio1.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 5
no bridge-group 5 source-learning
bridge-group 5 spanning-disabled
no shut
interface GigabitEthernet0.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
interface BVI1
ip address 10.73.12.7 255.255.255.0
no ip route-cache
ip default-gateway 10.73.12.1
ip http server
no ip http secure-server
radius-server deadtime 1440
bridge 1 route ip
(end)
I guess errer massage is telling Radio Frequency error.
I tried to change configuration "speed".
But still get error massage and I couldn't ping from my PC.Thanks, leolaohoo.
> My PC use Static IP Address and use TEST-2 ssid.
so I use TEST-2.
in this case, ignore TEST-1.
I just paste real configuration.
I tried to connect again.
But still I can't ping from PC to AP.
I use other PC.
I configured bellow.
-interface dot11Radio0
-speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
It was same resault.
Is cisco1941w broken?
I'd like to know one more.
I configured bellow, but I couldn't use 802.11a.
-interface dot11Radio0
-shutdown
how to use 802.11a(5GHz)? -
Siebel Gateway Name Server Configuration Wizard returns "Execution failed"
Hi,
I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
Steps done:
1) DB instance prepared
2) Created Siebel installation image
3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
Here are the errors I got in the log files sw_cfg_util*.log
<EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
Does anybody know what is the reason?
Searching in Metalink and Google were fruitless..
Thank you in advance.Just in case anybody bumps in this thread:
The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
Applies to:
+Siebel CRM - Version: 8.1.1 SIA [21111] and later [Release: V8 and later ]+
Linux x86
Symptoms
Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
The error on sw_cfg_util_xx.log is as follows,
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
Reproduce steps:
- confirm that siebel server was created before, and is stopping.
- create sh env and enter the following command to remove the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "3 - Remove Existing Configuration".
- complete the configuration wizard.
- enter the following command to create the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "1 - Create New Configuration".
- continue inputs to finish and execute the configration.
+==> you'll find "Execution Failed".+
Cause
AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
Solution
You can do either of follows,
+(1) Uninstall and Install the Siebel Server again.+
+(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
+[Step]+
Name = AddSrvrRegistryEntry
Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
Edited by: mmango on Jan 31, 2012 12:21 AM -
Failed to send emails from Enterprise
I am setting up a destination as email from Enterprise. But the instance failed with the error message:
destination DLL disabled. CrystalEnterprise.Smtp:
Is this relevant with my setting for SMTP which I thought I set up according to email server admin, or could it be something else I should change?
Thanks for help.Do you have the email destination enabled for your server? I'm using Edge, so I'm not exactly sure it is the same. But I had to enable and configre "Email" as an option for a destination on my CrystalReportsJobServer.
Hope that helps. -
XServe Drive Failed, replacement not being added
Have an XServe running 10.6 with three bays, configred as RAID5, SATA drives. One drive failed. We swapped it out and the new drive appears in the RAID Utility and he documentation says it should automatically be incorporated into the set, but it isn't. The set still appears as Degraded. The drive says SMART is Unsupported even though it is an SATA drive of the same size. Everything else looks the same as the other drives so we can't figure out why it's not being used. We're thinking (hoping) a server reboot will kick start things, but shouldn't hot swappable mean you don't have to do this?
Thanks,
JeffRebooting made SMART status change to "Verified". Re-ejected and reinserted replacement drive and tried Verify RAID Set and got the following in the log (drive in bay 2 is what died):
Monday, September 10, 2012 5:17:37 PM ET
The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
warning
Monday, September 10, 2012 5:15:45 PM ET
Drive carrier 00:02 inserted
informational
Monday, September 10, 2012 5:15:15 PM ET
Non-viable RAID set JBODSet1 and all associated volumes are offline
critical
Monday, September 10, 2012 5:15:13 PM ET
Drive 3:50014ee1026699f4 missing - Replace immediately or acknowledge loss of RAID set JBODSet1 and associated volumes
critical
Monday, September 10, 2012 5:15:13 PM ET
Drive carrier 00:02 removed
informational -
Hi Guys,
Tried to call from Lync server to CUCM, I have set the code from cisco trunk to cisco phone as G729. It failed as I expected...
The thing is I want MTP/XCODE that is in the MRGL to do the transcoding, is it possible?
I have attached the call trace, from it, I can see the call comes in and couple of XCoder have been allocated, but all gave me the error: No matching caps for either side A or side B, MTP not allocated..
Can anyone please explain to me:
1. why the XCoders failed to transcode?
2. Do I need to put a gateway inbetween to do the transcoding?
Thanks
JimJim,
I dont think this will work.
The configuration between Phone and Xcoder should be G729, as per your requirement. (i.e. phone <--- g711ulaw ---> Xcoder <--- g729 ---> Trunk endpoint )
However, with the above configuration the region between phone and Xcoder is configured with g711.
The previous scenario should work fine.
JIM_TEST_RG (cisco phone) to AU_PER_REG (Xcoder) is using G729
AU_PER_REG (Xcoder) to AU_PER_REG (Trunk endpoint) is using G711
Additionally, in the trace file provided earlier, we see that the device configured with RegionB=AU_PER_REG is advertising support for Multiple codecs (G711ulaw, G711alaw, G729, G729AnnexA,G729AnnexB, G728 etc ) which is generally the phone.
14641577.010 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::getResourcesAllocated -- Logging RegionB=AU_PER_REG Caps and MTP/XCoder Region=AU_PER_REG Caps
14641577.011 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::logCapabilitiesinTrace -- MTP/XCoder Device Caps = 15 11 16 12 2 4 257 259 261
14641577.012 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::logCapabilitiesinTrace -- Device Caps = 4 2 11 12 15 84 10 83 82 107
14641577.013 |14:43:23.172 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=0, PREF_LIST, regionA=AU_PER_REG regionB=AU_PER_REG latentCaps(A=0, B=0) kbps=64
However, the device configured with region JIM_TEST_RG supports limited codecs eg G722, G711Alaw, G711ulaw.
14641577.003 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::getResourcesAllocated -- Logging RegionA=JIM_TEST_RG Caps and MTP/XCoder Region=AU_PER_REG Caps
14641577.004 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::logCapabilitiesinTrace -- MTP/XCoder Device Caps = 15 11 16 12 2 4 257 259 261
14641577.005 |14:43:23.172 |AppInfo |MediaTerminationPointControl(120685)::logCapabilitiesinTrace -- Device Caps = 6 41 4 2
Please confirm if the phone is configred with JIM_TEST_RG region. And the XCoder and Trunk is configured with AU_PER_REG.
In case the issue still exists, please provide the complete set of ccm traces for a test call with the calling and called party details.
HTH,
Jagpreet Singh Barmi -
MS ActiveDirectory Ldap configration for BIpublisher
Dear forums Members,
I didn't find MS ActiveDirectory Ldap configration for BIpublisher all of configration
mail=[email protected],DC=mycompany DC=org
port :3268 and host entery but failed
Have you a document this issue?
Thanks
Best regards
SelimThanks Bill
it works. but domain @<domain> must be non-static
During user will login, they will enter " [email protected] " , Normaly company static but domain too many values and ldap object name is "mail"
expample : mail=[email protected]
May be Your syntax? %LOGIN_USER%@COMPANY.?? -
MS ActiveDirectory Ldap configration
Dear Forums members,
I didn't find MS ActiveDirectory Ldap configration so Apex (3.0) ldap test page rapidly Auth. filed. all of configration
mail=[email protected],DC=mycompany DC=org
port :3268 and host entery but failed
Have you a document this issue?
Thanks
Best regards
SelimThanks Bill
it works. but domain @<domain> must be non-static
During user will login, they will enter " [email protected] " , Normaly company static but domain too many values and ldap object name is "mail"
expample : mail=[email protected]
May be Your syntax? %LOGIN_USER%@COMPANY.?? -
RMAN restore failing in another environment
Hi,
I am facing a problem. I have to restore a database backup from production to Integration
environment. In Production, it is RAC db and RMAN and Veritas Net backup taking the backups.
In Integration Environment also we have the same setup.
So the steps I have done so far is:
1.Have the export of RMAN catalog schema from production and imported in RMAN server in Integration
Environment.#
2. UNIX admins put and mounts the TAPE in tape library.
3. Set the environment for new db in oratab file.
4. connected to target and RMAN.
5. startup nomount from RMAN.
6.executed the following commands
RMAN> run {
2> allocate channel t1 type sbt;
3> validate backupset 2805233;
4> }
released channel: ORA_DISK_1
allocated channel: t1
channel t1: sid=317 devtype=SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - Release 6.0 (2005090703)
channel t1: starting validation of datafile backupset
channel t1: reading from backup piece db_11192_1_651890513
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of validate command on t1 channel at 06/05/2008 12:23:51
ORA-19870: error reading backup piece db_11192_1_651890513
ORA-19507: failed to retrieve sequential file, handle=”db_11192_1_651890513″, parms=”"
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file
RMAN>
I’ve got the backupset key from RMAN catalog, but it is failing to validate the backup set.
And also all the subsequent attempts to restore spfile/controlfile/database are failing.
Now, I have been advised by Oracle that this is the problem with Media Manager and I have to contact
them, unfortunately I dont have support service from Veritas.
Could any of you guys please advise, do we need to do any other configrations in net back to Identify
the tapes from foreigen envirnment/ do we need to pass any more paramters from RMAN to see the newly
mounted TAPS?
Your help will be highly appreciated.
Thanks and Regards,
ZachZach,
Can you certain tests for me ?
1)
Lets assume some terms here
a) origclient = your target host
b) altclient = your destination host
c)media manager server = host that contains your netbackup master software
Can you goto altclient and first check if your altclient is able to browse the backups generated by the origclient
$NETBACKUP_HOME/bin/bplist -C <origClient> -t 4 -l -R /
2) Have you configured your ORACLE_HOME on the destination to link one of its libraries to the Media Management software ?
goto $ORACLE_HOME/lib
ls -lrt libobk.sl . This file should be a softlink to $NETBACKUP_HOME/bin/libobk.sl64
3) Please use the SEND command in your RMAN restore scripts. You need so specify the NB_ORA_SERV (your media management master server) and NB_ORA_CLIENT (your origclient host)
SEND 'NB_ORA_SERV=<media manager server>, NB_ORA_CLIENT=<origclient>';
4) Make sure your $NETBACKUP_HOME/bp.conf has the required parameters for client and server. client will be your origclient and server will be your media management server that has the netbackup master software -
Bit locker drive encryption failed due to power failer and hard disk corrupted
I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for helpHi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
I keep getting error -1202 when trying to download music or update my billing account.
Help! I have installed, uninstalled, and re-installed itunes because I get an unknown error -1202 when trying to buy music or update my billing account. Any ideas?
-
How do i print a picture of my phone
how do i print a picture of my phone
-
i find it very hard to believe that ipods no longer support firewire connections. i called them and asked why this is and they gave me some bull s*&t answer. they said that usb is more popular than fire wire. when i said that is a load of bull since
-
How to install and configure external drivers for JDBC and JMS adapters
Hi, In that thread: [JDBC Driver for Progress Database;, N V Seshagiri gave a link to a "How to" guide that is not available now... can anybody send me the .pdf file? I'm trying to install a JDBC driver (com.jnetdirect.jsql.JSQLDriver) with the visu
-
Changing properties file value without redploying code
Hi, If I use properties file colors.properties in my web dynpro application for storing key-value pairs as color1=RED color2=BLUE color3=GREEN is it possible to change colors.properties in future to show new colors color1=ORANGE color2=YELLOW color3