Configuration Error in JCo....

Hi Experts,
I am getting the following Error while Creating the JCo Connection .
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=vngsap1 GROUP=PUBLIC R3NAME=EC6 MSSERV=sapmsEC6 PCS=1 ERROR service '?' unknown TIME Sat Jan 05 11:56:42 2008 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
Regards,
DS
Edited by: DS on Jan 5, 2008 12:14 PM

Hi DS,
Please have a look at the eroor message which you have pasted
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=vngsap1 GROUP=PUBLIC R3NAME=EC6 MSSERV=sapmsEC6 PCS=1 ERROR service '?' unknown TIME Sat Jan 05 11:56:42 2008 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
1) Have you defined the entries for the message server in the services file .In windows its at ../system32/drivers/etc/services in linux its /etc/services.
2) Add the entries for your message server say sapms<instancename> <portnumber of message server>
Thanks
Pankaj

Similar Messages

Error in Jcos creation

Hi all,
I am getting an error in Jcos creation.This is tyhe error I am facing.I checked evrything.Evrything seems ok.But i am getting the belwo error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=zimssap GROUP=PUBLIC R3NAME=PRD MSSERV=sapmsPRD PCS=1 ERROR timeout while pending for route completion TIME Tue Jan 06 20:21:50 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
I configured sld so many times but never faced this issue.Some starnge error .Timeout oending for route completion.Please let me know what could be the problem?
Thanks and reagrds,
Rajesh

Hi
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION:
RFC_ERROR_COMMUNICATION | Unknown host
RFC_ERROR_COMMUNICATION - time out
Thanks,
Tulasi

Help needed for IPC configuration error

hi all,
I have installed IPC according to installation guide, RFC's are working perfectly. IPC_COM_SESSION_BEGIN gives a value. Still i get the following error while checking the ipc monitor n runnin the test.
Testing IPC standard installation. This test checks the IPC standard installation.Requires the default database. If Web Phone WP-940
is not in your database or not maintained
as expected, this test may fail.
Response tested successfully
Error while creating documentnull
Dispatcher gives
Using JAVA_HOME: C:\j2sdk1.4.2_03
Using CLASSPATH: ..\lib\IPCCustPatch.jar;..\lib\IPCPatch.jar;..\lib;..\lib\IPCEx
t.jar;..\lib\SAP_IPC.jar;..\lib\thirdParty.jar;..\lib\iaik_ssl.jar;..\lib\iaik_j
ce.jar
Using PATH: D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\W
bem;%java_home%\bin
Feb 17, 2007 1:42:58 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command GetPatchInfo in module SYSTEM
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: C
ontacting basis system
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: R
etrieved gateway settings from SAP Basis SystemCRMSERVER:sapgw09,CRMSERVER:sapgw
09
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: D
ispatcher settings:
        Try 1000 ms to ping an IPC server.
        Don't contact IPC servers the next 60000 ms after a ping.
        Use normal load balancing without any specialized servers.
        Specialized servers are generalized to replace dead ones.
        Load one leaves a server alone for 45000 msec.
        RFC support is enabled.
                (dispatcher:IPC_RFC_DISPATCHER, servers:IPC_RFC_SERVER_1
                 gateways:CRMSERVER:sapgw09,CRMSERVER:sapgw09) Don't send mail
about servers that are down.
Feb 17, 2007 1:42:58 PM      com.sap.sxe.socket.server.ServerBase [main] Info: I
PC Security-Level: 0
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.ServerBase [Main TCP/IP L
oop] Info: SAP IPC Dispatcher start
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Middleware Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Libjrfc version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: librfc version:
This RFC library belongs to the SAP R/3 Release *** 640,0,21 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Path to JCO: jar:file:/D:/ipc/lib/thirdParty.jar!/com/sap/mw/jco/JCO.
class
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: GetSupportedSAPClients
(no export SPC_ERROR_NUMBER)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: Ping (no export SPC_ER
ROR_NUMBER)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO_MW_MAX_STARTUP_DELAY = 3600. Assigned this value to jco.middlewar
e.max_startup_delay
Feb 17, 2007 1:42:59 PM ...server.rfc.RFCServer$JCOTraceListener [Main TCP/IP L
oop] Error: Please note: JCO Tracelevel 0 messages are mapped to error messages.
Typically they do not reflect IPC errors. JCO Error messages are typically no c
ause for concern
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM ... RFC Servers for program/destination [Main TCP/IP L
oop] Info: IPC_RFC_DISPATCHER via CRMSERVER:sapgw09
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Admin TCP/IP
Loop] Info: Started Admin Thread on port 9163
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: SAP IPC Dispatcher 4.0 SP07 started at Sat Feb 17 13:42:59 GMT+05:30
2007 on port 4444
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="Register" STATUS="STATUS" LEN="27" />host=192.168.0
.50&port=9999
Feb 17, 2007 1:43:05 PM ...ket.server.dispatcher.RegisterWrapper [WorkerThread-
1] Info: IPC Client Security-Level: 0
Feb 17, 2007 1:43:05 PM ...e.socket.server.dispatcher.ServerInfo [WorkerThread-
1] Info: 192.168.0.50:9999     Sat Feb 17 13:43:05 server registered
Feb 17, 2007 1:43:05 PM ...et.server.command.dispatcher.Register [WorkerThread-
1] Info: Server registered: 192.168.0.50:9999
Feb 17, 2007 1:43:05 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:Register, response code:200
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="Register" ID="79920001" STATUS="200" LEN="77" />
rfcProgramId=IPC_RFC_SERVER_1&rfcGatewayHost=CRMSERVER&rfcGatewayPort=sapgw09
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command Register: 172
Feb 17, 2007 1:43:59 PM ...ket.server.dispatcher.RegisterWrapper [Thread-2] Deb
ug: PING for 192.168.0.50:9999 (31 msec, load: 100/0)
Feb 17, 2007 1:43:59 PM ...ket.server.dispatcher.RegisterWrapper [Thread-2] Deb
ug:             Updated value is 5741 (31 ping, 100/0 load, never used)
Feb 17, 2007 1:43:59 PM         com.sap.sxe.socket.server.Storage [Cleaner] Debu
g: Session cleanup finished after 0 msec
Server gives
Using JAVA_HOME: C:\j2sdk1.4.2_03
Using CLASSPATH: ..\lib\IPCCustPatch.jar;..\lib\IPCPatch.jar;..\lib;..\lib\IPCEx
t.jar;..\lib\SAP_IPC.jar;..\lib\thirdParty.jar;..\lib\classes12.zip;..\lib\iaik_
ssl.jar;..\lib\iaik_jce.jar
Using PATH: D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\W
bem;%java_home%\bin
Feb 17, 2007 1:43:03 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command GetPatchInfo in module SYSTEM
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command PMESetSessionLanguage in module PME
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command RemoveProduct in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command CreateAdminSession in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command Profiler in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command DumpKnowledgeBaseBuffer in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command getXMLProperties in module IPC_ADMIN
Feb 17, 2007 1:43:04 PM             com.sap.tte.kernel4.TTEKernel [main] Info: S
tarting initialisation TTE Kernel
Feb 17, 2007 1:43:04 PM             com.sap.tte.kernel4.TTEKernel [main] Info: T
TE Kernel is not enabled
getLocalHost()=CRMSERVER/192.168.0.50
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [main] Info: I
PC Security-Level: 0
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [main] Info: T
his server will restart itself when database logon fails
Feb 17, 2007 1:43:05 PM            com.sap.sce.kbrt.imp.kb_loader [Thread-1] Deb
ug: Create KB_CRM_LOADER
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [Main TCP/IP L
oop] Info: SAP IPC Server start
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Info: IPC Client Security-Level: 0
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client request: Register:host=192.168.0.50&port=9999
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client response: Register:rfcProgramId=IPC_RFC_SERVER_1&rfcGatewayHo
st=CRMSERVER&rfcGatewayPort=sapgw09
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client closed:
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Server registered at dispatcher CRMSERVER:4444
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Middleware Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Libjrfc version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: librfc version:
This RFC library belongs to the SAP R/3 Release *** 640,0,21 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Path to JCO: jar:file:/D:/ipc/lib/thirdParty.jar!/com/sap/mw/jco/JCO.
class
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: GetSupportedSAPClients
(no export SPC_ERROR_NUMBER)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: Ping (no export SPC_ER
ROR_NUMBER)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO_MW_MAX_STARTUP_DELAY = 3600. Assigned this value to jco.middlewar
e.max_startup_delay
Feb 17, 2007 1:43:05 PM ...server.rfc.RFCServer$JCOTraceListener [Main TCP/IP L
oop] Error: Please note: JCO Tracelevel 0 messages are mapped to error messages.
Typically they do not reflect IPC errors. JCO Error messages are typically no c
ause for concern
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM ... RFC Servers for program/destination [Main TCP/IP L
oop] Info: IPC_RFC_SERVER_1 via CRMSERVER:sapgw09
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: SAP IPC Server 4.0 SP07 started at Sat Feb 17 13:43:05 GMT+05:30 2007
on port 9999
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Admin TCP/IP
Loop] Info: Started Admin Thread on port 9164
Warning in ConversionEngine: There is no entry in the table EWUKEYS. EMU currenc
y conversion disabled.
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="GetLoad" />
Feb 17, 2007 1:43:59 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:GetLoad, response code:200
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="GetLoad" ID="79980001" STATUS="200" LEN="24" />
socketLoad=100&rfcLoad=0
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command GetLoad: 16
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="GetLoad" ID="79980001" />
Feb 17, 2007 1:44:59 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:GetLoad, response code:200
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="GetLoad" ID="79980001" STATUS="200" LEN="24" />
socketLoad=100&rfcLoad=0
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command GetLoad: 0
PLS help
Thanks in advance.

Hi
I m getting the below error while clicking the configuration link in the product catalog. Any idea pls?
java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
     at java.util.Vector.get(Vector.java:709)
     at com.sap.isa.ipc.ui.jsp.action.GetMFATabAction.ecomPerform(GetMFATabAction.java:170)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)

How do I fix a Configuration Error on MacBook Pro?

I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5

Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.

Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0

Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. Karl

You will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Laptop crashed, moved HDD to another PC to use CS5 but it gives me a Configuration Error. Error:6

Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.

Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov

"Event code: 3008 Event message: A configuration error has occurred" while accessing the sharepoint site.

Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: 
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config    Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
    Exception type: ConfigurationErrorsException
    Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
    Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
    Request path: /_vti_bin/sitedata.asmx
    User host address: 172.16.20.80
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: abc\wss_setup
Thread information:
    Thread ID: 1
    Thread account name: abc\wss_setup
    Is impersonating: False
    Stack trace:    at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
   at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
   at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
   at System.Web.Configuration.RuntimeConfig.get_Authentication()
   at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
   at System.Web.HttpApplication.InitModulesCommon()
   at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
   at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advance

Hi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

ERP 2005 IDES Installation UME Configuration Error

Hello All,
I am installing ERP 2005 SR2 .
At the step of UME Configuration it is stopped.
I restarted sapinst but no luck , again stoped sap with mmc and restarted the machine and started the sap and then started the sapinst but there was also no luck.
I really appreciate if some one can suggest me.Thanks a lot in advance
ERROR 2010-10-14 16:20:54
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: 'Warning :
ERPTRAINING/sapmnt/ER5/SYS/global/security/lib/tools/w3c_http.jar file stated but does not exist !Exception occurred in openJar(
ERPTRAINING\sapmnt\ER5\SYS\global\security\lib\tools\iaik_ssl.jar ) : java.util.zip.ZipException: The specified network name is no longer available at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:111) at java.util.jar.JarFile.<init>( JarFile.java:127) at java.util.jar.JarFile.<init>(JarFile.java:65) at com.sap.engine.offline.JarFilter.<init>(JarFilter.java:30) at com.sap.engine.offline.FileClassLoader.openJar(FileClassLoader.java:1131) at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:623) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600) at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java :578) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)Oct 14, 2010 4:20:52 PM Info: UME configurator (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.pathOct 14, 2010 4:20:53 PM Error: main() [EXCEPTION] com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB. at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool .<init>(DBConnectionPool.java:115) at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38) at com.sap.engine.core.configuration.impl.cache.ConfigurationCache .<init>(ConfigurationCache.java:149) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236) at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl .<init>(ConfigurationManagerBootstrapImpl.java:60) at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79) at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke( Method.java:324) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing.. at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106) at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName (OpenSQLDataSourceImpl.java:197) at com.sa
p.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112) ... 11 moreCaused by: com.sap.security.core.server.secstorefs.FileInvalidException : File "
ERPTRAINING/sapmnt/ER5/SYS/global/security/data/SecStore.properties" is invalid: record with key "$internal/mode" is missing. at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:391) at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946) at com.sap.sql.connect.OpenSQLConnectInfo.getStore (OpenSQLConnectInfo.java:802) at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783) at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209) ... 13 more
ERROR 2010-10-14 16:20:54
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .

Hi Basis,
Note 848950/851251 may solve your problems.
If problem persists, then try copying the CD again to dump location and restart the installation , it appears that sapinst is not able to open jar file.
Hope this is useful
Regards
Umesh

Configurator Error- Warning while booking the Sales Order

Hello All,
I am working on Order Management. When i try to book the order using (wf pkg) some times it is throwing an error saying "Configurator error" But when i open the configurator its not a Error message, its jsut a Warning. So, i have to manually click on the CONFIGURATOR, clicking on PREVIEW Configurator, and FINISH Button each time.
Is there any API which can ignore this warning and proceed with Booking the order automatically. (Unless there is an Error, not the warning)
It would be really helpful for me, as i am doing this manually, almost 100 Orders daily.
Thank you,
Aush

You are probably getting the error because the order selections were not valid and therefore you could not book the order.
When you open the configurator and click finish, it may APPEAR that you did not do anything. But in reality, when you click Finish, your selections are changing. Some of the selections are done automatically by rules so some of your incorrect selections are getting fixed by simply opening the configurator and clicking on Finish.
You can verify that by opening the configurator but instead of Finish, click on Cancel. And then try to book the order. You will probably get an error because you did not let the auto-rules fix the errors in your order.
If you want to avoid doing this 100 times a day, you need to look at the process that is creating the order lines in ENTERED state. Your problem is somewhere there.
Hope this helps,
Sandeep GAndhi

IP Configuration Error - IP address in use by another device

My parents' have set up a wirless netwrok in their home but are experiencing a IP configuration error.
They have Cable Broadband going into a cable modem. The modem is connected to a DLINK router via ethernet. The router has an ethernet connection to one computer (PC running Windows 2000) and an ethernet connection to a NETGEAR Wall-Plugged Ethernet Bridge XE102 which provides a wireless connection for an iMac G5 in another room.
The PC and the iMac are able to connect to the Internet without any problems. However, my PowerBook can see the NETGEAR network but it can access the Internet through it. The following error message keeps popping up:
IP Configuration Error
192.168.0.100 in use by 00:13:46:6d:26:11, DHCP SErver 192.168.0.1.
I read some previous posts that indicated it may be a problem with an IP address being assigned to a printer (and they do have an HP PSC connected by USB to the PC).
I can't seem to figure out how to free up the IP address. I checked the router settings and it is configured to assign more than just two or three.
Any ideas? Thanks in advanced.

Have you tried resetting your router and reseting your cable modem this should Asign all new IP address to all of the Computers on the network.
To reset your modem unplug it and leave it out for about 3 min and then replug it and the router should either have a reset button on it or from your computer you should be able to reset it.
I think your going to need to change your IP address but try resetting everything first.
see here.
http://forums.livingwithstyle.com/archive/index.php/how-change-your-static-t1847 50p1.html
Also this site will help if you change the PC's Address
http://support.microsoft.com/default.aspx?scid=kb;en-us;308199&sd=tech

Configuration Error in JCo....

Similar Messages

Maybe you are looking for