Configuration Fails - Time Difference Between SA and SSO

I know this is going to be a light-bulb moment for me but I haven't been able to figure it out yet. I'm configuring SA and at the vCenter SSO credentials page. I put in the credentials and get the following error:
Installation aborted - could not authenticate to vCenter Single Sign On due to time difference. Please synchronize the clocks of Support Assistant Virtual Appliance and vCenter Single Sign-On server and retry the operation.
I changed the timezone for the SA appliance to match that of our vCenter server and I'm still getting that error. I noticed that the time is off by 7 hours on the appliance so I tried to trick it by setting the timezone to somewhere in Europe (which then showed the same time as vCenter), but it still failed. Any assistance would be greatly appreciated.

Here is what I have found to critical touch point when it comes to time and VAs
-: If you have AD.... ensure that the PDC\DC is pointing to a NTP source
w32tm /config /manualpeerlist:<fqdn or IP ntp server> /reliable:yes /update
-: ALL your ESXi server MUST have a NTP...make sure its the same at the AD PDC\DC. The ESXi server may take 10mins to 15mins
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2012069
-: Configure NTP on the VA

Similar Messages

Time differences between camera and iMovie

Hi,
When I import footage from my Mini-DV camera into iMovie I am seeing a difference between the time displayed on the tape and time displayed in iMovie. The camera says 48 seconds while iMovie says 44 seconds. I thought that it might be related to the framerate of the video in iMovie, but I have changed this to 25 fps which matches the video camera and am still seeing a different time. The framerate needs to be perfect as the footage is going to be shown side-by-side with a animated graph which builds with time.
Does anyone have any idea what could cause this time difference?
Thanks

< scratching head > we had something about a NTSC/PAL issue.. hmm.. ?
if possible, open an existing PAL project (window titles says DV-PAL), save it under a diff. name, import into that project, delete the not wanted parts..
another option is, quit iMovie, delete ~/Library/Preferences any com.apple.iMovie.plist file.. relaunch iM.. that 'resets' iM... sometimes, it starts to stumble..

Time difference between iPhone and iMac

I have both iPhone and iMac set to the same time zone and time. However, whatever iCal entries I make, there is a 9 hour difference between the two (iPhone being 9 hours behinf iMac).. Obviously, I am missing some setup somewhere but I truly cannot figure it out.

Sorry for hasty posting. Deep in the setup, under Mail, Contacts, Calendar, the Calendar was set to Cupertino and I am in Prague. That is why, stupid me ...

Execution time difference between Statspack and DBM_Monitor trace

Hi Everyone,
We noticed that output of query execution time is quite differ between statspack and session tracing (DBMS_MONITOR) report. The query execution time in Statspack was 1402 sec and in session trace file was 312.25 Sec. FYI database version is 11.2.0.3 which is installed on platform OL 5.8
Both of the following reports (Staspack/tracing) was executed on same system and at the same time. Could you suggest why execution time is differ in staspack and session tracing?
Staspack execution time :-
Elapsed Elap per CPU Old
Time (s) Executions Exec (s) %Total Time (s) Physical Reads Hash Value
1402.50 1 1402.50 9.1 53.92 256,142 3247794574
select * from ( select * from ( select resourcecontentslocati
on,isprotocolname,ismimecontenttype,indexedmetatext,objectid,met
atext,valueaddxml,resourcetype,resourceviewedtime,iscmaresultid,
resourcelastviewedbyuser,issequencenumber,nvl(length(contents),0
Session tracing time:-
call count cpu elapsed disk query current rows
Parse 1 10.58 256.44 43364 153091 0 0
Execute 1 0.01 0.08 0 0 0 0
Fetch 143 2.09 55.72 25440 32978 0 1000
total 145 12.69 312.25 68804 186069 0 1000
Thanks
Rajdeep

Hi,
First of all, please read the [url https://wikis.oracle.com/display/Forums/Forums+FAQ]FAQ page and find out how to use the code tags to format your output properly so that it's readable.
I don't want to work out the stats formatting but I'd guess that if you ran the query first time and the data was not cached, it would be slower than the 2nd query when it was cached. The stats should confirm this so please format them so we can see it properly.
Rob

Time difference between physical and logical standby

Hi,
I have just been tasked on getting some info and setting up dataguard for some users for read-only/reporting purpose.
The 3 questions I am being asked are:
1. What is the time difference in applying changes from primary to physical standby compare to logical standby
2. What is the overhead maintenance of having a standby database?
3.What latency is involved?
I will be glad to have your input on this.
Thanks

Hi,
Physical Standy where its a read only DB.
Logs are applied.
Logical Standy where it can be Read / Write DB and the logs are applied in terms of SQL Statements.
Thanks & Regards,
Pavan Kumar N

Time differences between ical and iphone

When syncing ical to iphone i have a time difference of 9 hours. (dates on the iphone are always 9 hours earlier) No matter on which device the entry was made.
Time zone is set to Berlin, Germany on my iphone as well as on my G5.
Same thing is happening when syncing the iphone with my google calendar.
Any suggestions?

A restore of my iphone solved my problem.

Response time difference between copy and original

I have make an export of my database like that :
EXP system/manager@mybase owner=myowner file=exp_mybase_myowner.dmp
and an import in new session (on same server):
IMP system/manager@mybase2 full=y file=exp_mybase_myowner.dmp
To increase performance of my two databases, i have drop all indexs and recreate them.
But, response time is significantly different between databases.
How can i solve this problem ?

1. Analyze all the tables that are used in your query by using command:
Analyze table <table_name> compute statistics;
You can alsp use package DBMS_STATS.GATHER_DATABASE_STATS to calculate the statistics for all object in DB.
2. Have you checked the DB_BLOCK_SIZE for both the DB? Is it same? Command "SHOW PARAMETER DB_BLOCK
4. Is the SGA size same for both the DB? Command "SHOW SGA"
3. Was there sufficient RAM to create the SGA? I hope you are not using SWAP space for the SGA

One hour time difference between Palm and Exchange calendar items

Calendar items on Exchange and Palm are off by one hour.
Exchange server, desktop PC and Palm are all set to PST with the same time. Versamail account on Palm has been deleted and rebuilt.
See screen shots at http://picasaweb.google.com/lh/photo/kPKBDS28rhdVsextLM1PPQ?feat=directlink
What is interesting is the appointments entered in Outlook show up on the Palm one hour early however they show the correct time in (parenthises) so the Palm seems to be somewhat aware of the problem.
This same issue occurs on different Palm T/X 's with different Outlook accounts.
Any suggestions are welcome
Post relates to: Palm TX
This question was solved.
View Solution.

You need this update:
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=9306
Download
DSTUpdater.zip (0.01MB)
Double-click the downloaded file to decompress it. Your computer will unzip the file to a folder containing several individual files.
Message Edited by IrreducibleM31 on 03-26-2009 05:12 PM

Page load time differences between IE and Firefox

Hello all,
I have a problem with page loading time in IE 8. My page contains tabular form, classic report and some other items. I use some javascript code(placed in HTLM Header section) and also dynamic actions. When I try to display the page in IE I have to wait for 40 seconds (100 rows in tabular form). I realized that the performance is dependent on the number of displayed rows in the tabular form. But decrease the number of visible rows, using pagination, is not an option, because all needed rows should be visible for the users. During the tests I have tried to remove all the JS code and disable all the dynamic action, but the loading time was more or less the same.
When I try to run the same page in FireFox then it is displayed in 4 seconds!
I have already try to search some tips or advices how to speed up the page loading, but only what I have found out is, that every web browser is different. The javascript is handled differently, page rendering is done differently and so on.
Maybe there is something what I have missed, and you experts can help me. Is there anything general what I should check or change to speed up the loading time in IE?
Thanks in advance!
Jiri
APEX v. 4.2.1.00.08
IE 8.0.7600.16358
FF 19.0.2

Thanks Denes for your reply.
I use HttpWatch tool to measure the loading times. Reports are mostly the same for IE and FF. I can see from the report, there is three times shown error 404 Not Found for the items below.
http://......./images/sRegion-Body.png
http://......./images/sRegion-Bottom.png
http://......./images/sReportBG-Standard.png
The last action which caused 404 error started 2 seconds after the page was asked to refresh. The next action http://......../i/libraries/jquery-ui/1.8.22/ui/i18n/oracle/jquery.ui.datepicker-cs.js started after 38 seconds (hanging in the same place for 36 seconds). Does it mean that the problem is caused by http://......./images/sReportBG-Standard.png action which returns 404 error?
How can I add the missing images?
-Jiri

Time difference between the Identity system and Access System: OAM

I was installing OAM. Performed the below steps.
-installed identity server
-installed webpass
-setup of identity system console
-installed policy manager
-setup of access system console
The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
The Identity Server, WebPass and Policy Manager are installed on the same machine.
Userdata repository: OVD 10.1.4.3
Policy and Config Data Repository: OID 11.1.1.3
OAM: 10.1.4.3
Windows2008 - 64bit
Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
Any idea on this error. Please Advise.
Thanks in advance.

Try this::
Check Time Difference Between Identity and Access Manager Systems
Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

Difference between customizing and configuration?

Is there any Difference between customizing and configuration?

Hi Rajesh,
What is Client? What is the difference between Customization and Configuration?
The difference between cutomizing and configuration is:
- CONFIGURATION: we will configure the system to meet the needs of your business by using the existing data.
- CUSTOMIZING: we will customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process.
- CLIENT: A client is a unique one in organizational structure, can have one or more company codes. Each company code is its own legal entity in finance.
Configuration vs. Customization
When considering enterprise software of any type, it is important to understand the difference between configuration and customization.The crux of the difference is complexity. Configuration uses the inherent flexibility of the enterprise software to add fields, change field names,modify drop-down lists, or add buttons. Configurations are made using powerful built-in tool sets. Customization involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes may not easily migrate to the new version.Wherever possible, governments should avoid customization by using configuration to meet their goals.Governments also should understand their vendor's particular terminology with regard to this issue since words like "modifications" or "extensions" often mean different things to different vendors.
Reg,
Ashok

Time difference between Mac & Windows

I have just successfully installed Windows XP SP2 using boot camp. But the clock in Mac and Windows are always different, for example, if i am running Mac and time is 4.00 p.m; then I restart in Windows, the time in Windows now is 8.00p.m. If then I changed time in Windows and restart again in Mac, the clock in Mac is 12.00p.m (4 hours late). I have tried several times but it stays the same. Is there anyone having the same problem as mine?
ah, 1 more small thing, when using Windows, which button in Mac keyboard is for printscreen? In the manual for Bootcamp, it is said that using fn+f11 but it doesn't work???

autumn_fail:
For Print Screen try using Fn-Shift-F11 combination. Also read *[_This Article_|http://support.apple.com/kb/HT1220]*.
As far as your question on the Time difference between Windows and OSx, this is a known issue with Windows and OSx running on a mac. This has to do with how both Operating Systems set the time. One way to handle this is to run time preferences as soon as you log into OSx (after logging out of Windows). Its a pain nonetheless.
Please *[_Click Here_|http://discussions.apple.com/thread.jspa?messageID=7965906&#7965906]* for more information on this subject.
Axel F.

Time sync between AP and Controller failed

Hi,
I just lost one AP from vWLC and found this trap:
Time sync between AP and Controller failed
What that is means?
I check time on remaining AP's and found out that time on AP's is different form wlc (time on AP's is 2 hours less than time configured on vWLC).
On vWLC I have configured NTP and timezone.

Ok, I try that on one ap next week, but problem is that I have 50 of them on 6m pole and many of them have same traceback in logg:
%SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1398025296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:41:18.351: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:45:26.439: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:45:37.831: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 19:02:15.394: Fw Aborting cmd before Timeout
*Sep 2 19:02:15.394: mvl_handle_timeout called cmdtype=[0x20]
Only one is disconnected because Time sync between AP and Controller failed trap.
Many of them have logg filed with:
*Aug 31 08:21:45.382: Dtx dump: 4B07D5C 2192 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACCA2C 2193 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AEA3C4 2194 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD1DD8 2195 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACC284 2196 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AE4F00 2197 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AE8498 2198 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AEF054 2199 0 flags 423 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACE46C 2200 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AFE324 2201 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD4CE0 2202 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD53FC 2203 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
Don't know what that mean.

Difference between 'setup' and 'configuration' in Oracle Apps

Hi,
Thank in advance.
I want to know Difference between 'setup' and 'configuration'(Oracle Apps ). Could you provide the details with an example, please?
Regards,
Raghavendra Rao

Business Requirement:-
===============
A company may want to allow all of its employees to make purchases up to $10 without having such purchases approved. Another company may have a business rule that each employee’s approval limit depends on his or her position within the organization.
Question:-
=======
How to reach the above requirement?
Is it thorugh configuration or setup?
It must be through configuration and not set up.
Set up is something like one time.. Configuration can be changed depends on your business needs.
Like if your company wants to increases the limit from 10 to 100$, then change in configuration is needed.
Hope you got the answer.. if you want more explanation, please be specific....

How to measure time difference between zero crossing of a sine wave and rise time of a pulse on a same graph?

I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
Cheers
Awais
Message Edited by awais.h on 03-30-2010 11:20 PM
Message Edited by awais.h on 03-30-2010 11:21 PM
Solved!
Go to Solution.

Hi
Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
Here is what I get using that code.
As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
Here is the the code modified.
As you can see, it wasn't that big of a modification and it still is your code.
I will keep trying.
Thanks for the help
Attachments:
FinalShockSpeed.vi ‏55 KB

Configuration Fails - Time Difference Between SA and SSO

Similar Messages

Maybe you are looking for