Configuration is not copied from CRM to ECC

Hi,
We have one contract in  CRM and configuration for the line items are done in CRM. Now when that contract is replicated in ECC, configuration of that line item is not copied. So when we create sales order with respect to that contract in ECC, we will have to do the configuration manually.
We have observed that the item category for the particular line item in question is active for configuration in CRM and not customized to configuration in ECC. Is it because of that the configuration is not replicated?
Please help
Thanks.

the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

Similar Messages

  • Configuration is not replicated from CRM to ECC for configurable product

    Hi,
    We have some materials in the system for which the configuration is not replicated from CRM to ECC.
    We create a quotation in CRM and configure it. In CRM,  the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
    Please find below finding
    1. If the same material is created in another plant/company code, the configuration is replicated properly.
    2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC),  it is properly exploded and complete.
    3. variant prices are replicated properly even though components are not replicated.
    We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
    Please  advise.
    Thx.

    the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
    My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

  • Business Partner with Classification not replicated from CRM to ECC

    Dear CRM gurus,
    We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
    When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
    In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
    Desperately need help! Points will be generously rewarded.

    Hi guys,
    most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
    One standard stumbling block is the field "language key" under communication data....
    I hope that's what is causing the problem
    cheers
    Jens

  • Configuration steps not copied from Template project

    Hi All,
    We are creating a project using an existing template project (our own defined). The business processes are copied but the configuration steps and documentation in configuration does not come in the new project (SOLAR02).
    Could any one help.

    Goto solar01 transaction here first choose the business scenario of ur template project which you have added in the structure tab on the right side you have something known as attribute column
    Here choose the appropriate one for you
    Global
    A process is global when it is integrated throughout the enterprise, that is, it is cross-functional or cross-organizational. An element that is flagged as global cannot be changed in a Local Rollout, i.e. the structure element and all associated business content is pre-determined.
    Standard Complete
    A process is standardized if it must be executed in the same way in the entire enterprise (in all relevant organizational units). A standardized complete element (and its business content) can be seen as a proposition from the Global Template that should be used as delivered. However the local team may extend the structure element with additional substructures and with additional business content.
    Standard Partial
    A process is standardized if it must be executed in the same way in the entire enterprise (in all relevant organizational units). A standardized partial element (and its business content) can be seen as a proposition from the Global Template that should be used as delivered, but the process consist of sub-processes that are locally regulated by legal requirement and these need to be defined on a local level. The local team can design own process if agreed by the parent company. Therefore the local team may extend the structure element with additional substructures and with additional business content. Template business content may even be changed or deleted by the local team. Whenever a template object is deleted there is a warning message.
    Harmonized
    These Business Process, Master Data, Organizational Units will be standardized in the future. It is recommended that the Local Rollout uses the harmonized structure elements. A process is harmonized if it is recommended to execute the process in a specific way. Harmonization is a first step towards standardization, but without mandatory elements. One reason can be for organizational readiness or many legal requirements preventing standardization. For the local teaam the same activities are allowed/forbidden as for Standard Partial.
    Local
    A process is local if it is not possible or it makes no sense to define it as global, standardized, or harmonized. Local units must design this process for their needs. These processes are necessary for obtaining an executable system for testing. For the local teaam the same activities are allowed/forbidden as for Standard Partial.
    Note You can use the pass tab available next to +/- button which is used to pass this attribute which you have assign to the lower levels.
    Hope you got what you are looking for
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Mar 20, 2009 2:12 PM

  • Payment card details not replicated from CRM to ECC

    Hello
    We are creating BP in CRM which replicates into ECC. In BP, we are maintaining Payment cards. But, while replicating to ECC, this Payment card details are not replicating to ECC.
    The data is present in the BDoc.
    Please help!!
    Regards,
    Debolina

    Hi Debolina,
    Can you please share the solution. I have the similar requirement.
    Regards,
    Vaibhav

  • BP not getting replicated from CRM to ECC server

    I am currently facing an issue, it seems like the replication of BP from CRM to ECC is not working, I have created a few business partners in CRM for which the BDOC got processed completely but when I go and check these on the ECC side, I am not able to find these BP. Can any one suggest what might be happening.

    Thanks a ton for the note number Denis, I am looking into this and would certainly revert back to you if this works. Just to explain you the excat problem that Im facing as of now.
    I have a few Business partners which we are not able to replicate from CRM to ECC, I have tried to debug the queue and find out what the reason might be, i could see that everything got processed successfully at the CRM side, the issue is when the BDOC reaches ECC, there it gives me a error that "NO UNIQUE JURISDICTION CODE CANNOT BE DETERMINED" area as "TAX_TXJCD".
    If you can suggest anything new based on this information please let me know, in the mean time I will try the note that you had provided and would get back to you very soon.
    Regards,
    Nitin

  • Sales Orders Not Replicating from CRM 2007 to ECC 6.0

    I have been able to successfully replicate my Customers from ECC to CRM. When attempting to replicate a Sales Order from CRM into ECC, the BDoc shows as "Confirmed (fully processed)" in SMW01. When I look at the list of receivers, it shows my ECC system, with a state of "Processed". However, when I look at the Error Segments on the BDoc, I have two events:
    1. No Upload into R/3
    2. R/3 Adapter is Called
    Any thoughts on what I am missing?
    Thanks!

    MCG,
    Thanks for the quick reply. Yes, I have a publication of "All Business Transactions (MESG)" with a subscription of my ECC system. The BDocs never make it into the Outbound queue. I purposely stopped the outbound queue to see if it would show-up ... it never comes in.
    Thanks!

  • Cross-System Copying of Transaction Types from CRM to ECC

    Hi Gurus,
    We have a requirement where we need to create followup transactions from CRM to ECC.
    eg:- We want to create a Sales Order in ECC as a followup transaction to a Service Ticket in the CRM.
    1) So please guide what needs to be done inside CRM.
    2) Is there some specific list of ECC transactions which could be created as followup to a CRM transaction or any ECC transaction can be created as followup.
    thanks for your help in advance.
    rgrds,
    Randhir

    Dear Randhir,
    You need to ensure that transaction type and item category of ECC and CRM are in Sync. Maintin followup of your transaction type.
    Thanks and regards
    Pankaj Kumar

  • UPLOAD OF EMPLOYEE BP FROM CRM TO ECC

    Hi all,
    Is it possible to upload Employee Business Partners from CRM to ECC system.
    as per client business process we create Employee Business Partners in CRM system and they need to upload in to ECC system.
    I have worked on downloading of Employees data from ECC to CRM using ALE IDOC.
    Please suggest whether it is feasible or not? If standard solution is available kindly let me know.
    Your help will be highly appreciated.
    Best regards,
    Raghu ram

    Hi ,
    The common practice is to download "Employee" from ECC to CRM thru ALE IDOC ,
    But you can also take another approach :
    1) Create  employee as business partner in role "BUP003" "employee" in SAP CRM .
    you can create manually or you can use BP upload program in CRM.
    2) You need to configure "internal number range " for business partner "emplyee " in CRM , and "External " in ECC Backend
    3) set up middleware for replication of BP from CRM to ECC .
    4) Business partners - EMPLOYEES create in CRM will be replicated to ECC as Business partner ( and not as HR employee )
    hope this helps,
    PD

  • Replicating partner function (VE=sales employee) from CRM to ECC

    Hello, we managed to replicate the ECC customers and contact persons to SAP CRM.
    Now we also want to replicate to CRM the partner functions (VE = sales employee) of ECC that are linked to the customer in the sales view. When I replicate the object customer_rel they are not synchronised to CRM. I have maintainted the 'distribution of partner functions from SAP ECC into CRM and vice versa in SPRO.
    What are the different steps that I need to do? What am I missing?
    Should we be alble to see those relationships on BP in CRM once synchronised? If yes, in which relationship? Since the employee responsible is already filled manually for another function.
    Thanks for your help on replicating partner functions from CRM to ECC?
    Kr, Anouck

    Hi Anouck.
    If I've understood correctly, for that you must pass the employees from ECC to CRM first.
    You can do this by running report RHALEINI at ECC side, but you must configure some things first (like creating a CRM grouping to indicate the number range for employees, and to activate at CRM side this integration)
    Kind regards,
    Garcia

  • Replication of storage loaction issue from crm to ecc

    HI Experts ,
    I am facing issue while store location replication from CRM to ECC.
    I have create field "Hub Location" using AET  on web  ui and behind that store  location search field is working .
    I have already created a Order . I have copied that order .Add store location .
    When i save Now all process executed and BDOC execute successfully with no error .
    I have enhanced BADI data exchange and add code in method crm_dataexchange_after_fill method and added store location .
    Issue : Now when i go-to to crmd_order transaction and checked that order then i am getting error that Store location plant is not defined .
    Please help .
    Regards ,
    Rishi

    Hi Rashi,
    Sorry for the late reply.
    Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
    Once you create the order in CRM and it will come to debug in ECC.
    Check TI_EXTENSION_IN tables whether your values are coming in.
    If not your CRM Middleware BADI coding was not done correctly.
    Hope this would help you.
    Regards,
    Bala

  • Mass sales orders from CRM to ECC

    Hi,
    We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
    Could you please let me know if you know any kind of solution for this kind of scenario.
    Thanks in advance!
    Regards,
    Kumar B.

    Hi Maggie,
    Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
    Could you please let me know how to try this other please let me know the program or tcode.
    Regards,
    Kumar B

  • Restrict Contact Person replication from CRM to ECC based on Partner Funct

    Hi Experts
    We are replicating Contacts from CRM to ECC, by assigning them to Accounts. We have a scenario to restrict Contact Person replication to ECC only for specific Partner functions (we have 5 such partner functions), for remaining partner functions the contact Persons should not be replicated to ECC.
    By Partner function I mean, while making this assignment of Contact to an Account in u201Ccontact Person Relationships datau201D under u201CPartner Function Assignment blocku201D (in web UI) we are adding a Partner function E.g. Author, (same can be seen in GUI, under Usage tab of CP Relationship data).
    However we were able to replicate contacts assigned to accounts to ECC in our 5 partner functions, but even the unwanted contacts assigned to other partner functions in CRM are also getting replicated
    How can I restrict CP replication from CRM to ECC based on Partner Functions assigned to the Contact Person
    Your help is highly appriciated.
    Points guaranteed.
    Regards

    Issue resolved using CRMC_BUT_CALL_FU.
    Posing the table name, just in case it might help others.
    Thanks

  • How can I Force/relaunch BP replication from CRM to ECC

    Hi everybody,
    We had some replication problem with sold-to-party BPs when creating them in CRM (Tr Code BP). The CRM002 id was not implemented in most cases. A job was planned to relaunch the Bdocs automatically every hour. It seemed to be ok for a moment.
    However we still have some sold-to-party BPs that are not replicated at all in ECC (Master Data and sales data). The usual procedure we set to trigger the replication is checking a case in BP Tr. but when I uncheck the case and check it again, the replication doesnt happen.
    Is there a way to force manually the replication of a sold to party BP from CRM to ECC?
    Second question in replication subject : We also have partial replication in ECC. For example the Tax classification partially replicates. It's like if the replication process in crashing on the way and the result is no CRM002 id back in the BP master data in CRM. Do you have any idea of where it's coming from?
    Is there a Transaction like SMW01 (CRM) in ECC in order to trace replication problems of processes?
    Many Thanks.
    Laurent

    Hi,
       Firstly , please check if you have any filters in for adapter object customer_main in trx. R3AC1 (which prevants data replication)
    Next, check if your inbound (SMQR) or outbound queues (SMQS) of CRM are de-registered.
    You can use trnx.
    CRMM_BUPA_SEND
    to manually replication a BP to the ECC system.
    No.. there is no monitor in ECC like the Bdoc monitor (SMW01) in CRM.
    Hope this helps. Reward if helpful!
    Thanks,
    Sudipta.

  • Middleware debug problem  for BP's from CRM to ECC

    I tried few steps to debug BP  changes from CRM to ECC but nothing is working ...
    I deregistered the Queue thru SMQS, made changes to BP.. went SMQ1 select the Queue name Double Click 2 times.. then select the Tool bar (Debug LUW)..    I'm getting "Nothing was selected"
    When is see SMW01, BDOC is processed green and data is transferred to ECC.
    I want to do debug  the BP queue and go to ECC system  as some of my custom EEWB fields are not passing to ECC correctly.
    Any help is highly appreciated.
    Thank you.

    Hi,
    Put a break point in FM  SMW3_MFLOW_UPDATETASKBDOC.
    Create a BP and before save type /h to activate debug, mark update debugging option.
    When stops in FM SMW3_MFLOW_UPDATETASKBDOC you must be sure to set header-dbgmode = 'X' this will make the bdoc stay stopped in SMW01.
    Go to SMW01 and type /h and process the bdoc.
    Put a break in FM CRM_UPLOAD_AFTER_MAP_HANDLER and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
    Put a break-point in the "CALL TRANSACTION" command. Change the mode of call transaction and you be able to debug XD*  update.
    Best Regards,
    Caíque Escaler

Maybe you are looking for