Configuration needed for Installing Oracle 9i-R2 on Linux Itanium

I need a specific documentation for Installing Oracle 9i-R2 on Linux Itanium server.

Oracle does not support running the 32-bit database on Itanium.64-bit Oracle database software only supports 64-bit for Itanium.
Check Metalink Note:266043.1 for details
Virag

Similar Messages

  • Help needed in installing oracle applications 11i in Linux

    Hi every one . i m trying to install oracle applications 11i suite in Linux machine.. but i am getting error in the following way
    Error in File System
    Error - Unable to create directory with proper privileges:
    Database ORACLE_HOME
    Mount Point = /d02/oracle/proddb/9.0.2
    and it continues for all the directories which application is trying to create..
    And also Error in File Space Check
    Error - Not enough free disk space on system :
    Database ORACLE_HOME = /d02/oracle/proddb/9.2.0
    required = 2905.0
    available = 0.0
    I have some 140 GB free space in my disk... Please help me out... thankx in advance

    Nothing changed .. its shows the same error...
    i will explain my scenario... i have a dump of Oracle suite in Hard Drive.
    assigned value to LD_ASSUME_KERNEL
    Creater Users. group
    created directories oracle & apps
    and given permissions... to the directories...
    Its showing the same error again and again... plz help out

  • Pre-requisites for installing Oracle 10gR3 on RedHat Linux

    Hi All,
    I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
    Could someone please let me know where I can find this info?
    Thanks,
    Madhan

    http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
    HTH

  • I need XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER

    I NEED XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER.
    UR HELP REALLY APPRICATED.

    Please get Cygwin, or (Real)VNC, or putty (all free), or eXceed (not free, but free demo),
    but do not SHOUT.
    Sybrand Bakker
    Senior Oracle DBA

  • Best practice for install oracle 11g r2 on Windows Server 2008 r2

    Dear all,
    May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
    Just grant Full for Administrators and System and remove permissions for all others accounts?
    Also how should I configure windows firewall to allow client connect to the database.
    Thanks for your help.

    Hi Christian,
    Check this on MOS
    *RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
    DOC Modified: 14-DEC-2010
    Regards,
    Levi Pereira

  • Docs needed for installing siebel in solaris 10 x86, Urgent..!!!!!!!!

    Docs needed for installing siebel in solaris 10 x86
    Thanks
    Kishore
    Edited by: Kishore P on Aug 11, 2010 6:03 PM

    If it's documentation you're after, always go straight to Siebel Bookshelf!
    http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstUNIXTOC.html

  • Do I need to install oracle database 10gr2 before installing Oracle applica

    I am new to Oracle application server. I am going to install Oracle application server 10g. From what I read, it looks like I need to install oracle database 10gR2 first on the SAME server? Is that correct?
    If I do so, oracle_home will be point to where? to the Oracle application server home directory, or oracle db directory?
    Thank you very much for you help.

    hi,
    Even i am new to oracle application server and had the same doubt that you have.
    When you install Application Server there would be two tiers installed, application tier and middle tier, these tiers can be running from the same machine or different machines.
    These tiers will have a meta data repository to store application server related data, this database will be installed along with application server.
    It is upto you to install "oracle database 10gR2 " before or after installaion of application server, this will be an independent database which will have its own home, but after this installation you will have three homes, ex: infra_home,mid_home and 10gR2_home.
    by default oracle_home is set to the last installation that happens so if you install the database 10gR2 after installing application server it will point to 10gR2_home, but if you install 10gR2 before and application server later then the oracle home will be infra_home(if both the middle tier and infratier are on the same machine)
    you can always change the oracle home by using set ORACLE_HOME=path/to/oracle/home( in windows)
    or export ORACLE_HOME=path/to/oracle/home (in unix)
    hope this helps....
    regards

  • Oracle apps configuration required to install oracle lite database

    Hi,
    Can any one suggest me the oracle apps setups and configuration required for installing the oracle lite databse in my laptop.
    The olite databse must sink with my existing oracle apps.
    thanks in advance...

    user596857 wrote:
    Dear Experts, (I'm far from expert, but I possess enough shreds of knowledge to answer your question, so here goes. ;-) )
    1a)
    My server has Oracle version 11.1.0.6.0, but the matrix says it wants 11.1.0.7.
    I should get a warning right?
    Can I just proceed with the install, over-riding the warning?
    1b)
    If so, what is the procedure to install into the existing database?
    It wasn't obvious in the (150 page) install docs. The EBS install delivers its own ORACLE_HOME for the database. There isn't an option to install into an existing database as far I know. The installer will ask where to put the new ORACLE_HOME for the EBS database. You might get a warning if you try to install to a pre-existing ORACLE_HOME, and I don't recommend ignoring that warning. The result will either be ugly immediately or, even worse, ugly later when it's harder to figure out why. ;-)
    Do an upgrade?Won't really help. The ORACLE_HOME that's bundled with the installer usually comes with additional patches pre-installed, as well as EBS-friendly configuration options. You're much better off taking what it gives you so you can get down to the real fun of learning EBS. :-)
    Or, do regular install, but not Express/Rapid Install?I recommend doing a Vision install for learning EBS.
    Can I choose not to install the database software?Nope (unless my memory is really that bad), and there's no real benefit to doing so. All you'd save is a couple GB of disk, and as a percentage of the total install footprint of EBS, the database ORACLE_HOME is relatively tiny.
    Regards,
    John P.
    http://only4left.jpiwowar.com

  • Howto for install Oracle Client or ODAC for W2k8R2?

    Hi all!
    I want know if it gives a Oracle Docu for installing Oracle Client or ODAC for Windows Server 2008 R2 64bit. I have a MS SQL 2008 Server and want make a linked Server to an Oracle 10g RAC-Database (10.2.0.4) and want know if i must only install the Oracle Client or did i also need ODAC?? And i have read, that it is better to install by the Client 32bit and 64bit from Oracle Client. So what is the best way to make a linked Oracle-Server on my MS-SQL 2008 on Windows 2008 R2? Hope someone have a positiv answer. Thx
    Greetz
    Franco

    Hi,
    No, you don't need to download the Grid Client infraestructure file. That's a tool to install on servers.
    The problem is that you are downloading a version of 11.2 in 64 bits, and 11.1 in 32 bits. So maybe they hay changed something between 11.1 and 11.2 that you dislike.
    You could download the 64bit version of 11.1 client, but however, you can manually create a tnsnames.ora if you want. You could use netca for that purpose.
    Regards,
    Mario Alcaide
    http://marioalcaide.wordpress.com

  • Need to install oracle application server

    i need to install oracle application server. so plz tell me how can i do this ,and i dont know about the oracle application server achitechture.
    plz provide some links ..so that i can understand
    developers are asking me to install oc4j container

    There are installations guides for the various Oracle Application Server offerings. So my first suggestion would be to have a look around relevant documentation section of OTN and see what you can learn.
    As you've mentioned OC4J, that does indicate you are looking at Oracle Application Server 10g:
    http://www.oracle.com/technology/documentation/appserver10132.html
    If you are looking for Oracle Fusion Middleware 11g, then this is the main page to start from:
    http://download.oracle.com/docs/cd/E15523_01/index.htm
    -steve-

  • Prerequisites needed for installing R12 in linux (64-bit)

    Hi,
    Please list the OS Prerequisites needed for installing R12 (Vision dB) in RedHat ES. Please also let me know whether it will support 64-bit
    Thanks,
    Anand

    I do not think it is possible to paste the whole page. However, please find below all the details which are relevant to Red Hat Enterprise Linux AS/ES 4.0
    Kernel Requirements & Settings
    Red Hat Enterprise Linux AS/ES 4.0: 2.6.9-42.EL
    Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.
    kernel.semmsl: 256
    kernel.semmns: 32000
    kernel.semopm: 100
    kernel.semmni: 142
    kernel.shmall: 2097152
    kernel.shmmax: Half the size of the physical memory (in bytes), and at least 2147483648
    kernel.shmmni: 4096
    kernel.msgmax: 8192
    kernel.msgmnb: 65535
    kernel.msgmni: 2878
    fs.file-max: 65536
    net.ipv4.ip_local_port_range: 1024 65000
    net.core.rmem_default: 262144
    net.core.rmem_max: 262144
    net.core.wmem_default: 262144
    net.core.wmem_max: 262144
    Required Packages
    - binutils-2.15.92.0.2-21.x86_64.rpm
    - compat-db-4.1.25-9.i386.rpm (32-bit)
    - compat-db-4.1.25-9.x86_64.rpm
    - control-center-2.8.0-12.rhel4.5.x86_64.rpm
    - gcc-3.4.6-3.x86_64.rpm
    - gcc-c++-3.4.6-3.x86_64.rpm
    - glibc-2.3.4-2.25.i686.rpm (32-bit)
    - glibc-2.3.4-2.25.x86_64.rpm
    - glibc-devel-2.3.4-2.25.i386.rpm (32-bit)
    - glibc-devel-2.3.4-2.25.x86_64.rpm
    - glibc-common-2.3.4-2.25.x86_64.rpm
    - gnome-libs-1.4.1.2.90-44.1.x86_64.rpm
    - libstdc++-3.4.6-3.i386.rpm (32-bit)
    - libstdc++-3.4.6-3.x86_64.rpm
    - libstdc++-devel-3.4.6-3.i386.rpm (32-bit)
    - libstdc++-devel-3.4.6-3.x86_64.rpm
    - libgcc-3.4.6-3.i386.rpm (32-bit)
    - libgcc-3.4.6-3.x86_64.rpm
    - make-3.80-6.EL4.x86_64.rpm
    - pdksh-5.2.14-30.3.x86_64.rpm
    - setarch-1.6-1.x86_64.rpm
    - sysstat-5.0.5-11.rhel4.x86_64.rpm
    - xscreensaver-4.18-5.rhel4.11.x86_64.rpm
    - openmotif21-2.1.30-11.RHEL4.6.i386.rpm**
    - libaio-0.3.105-2.x86_64.rpm
    - libaio-0.3.105-2.i386.rpm (32-bit)
    - libaio-devel-0.3.105-2.x86_64.rpm
    Software Requirements
    - ar
    - gcc
    - g++
    - ksh
    - ld
    - linux32
    - make
    - X Display Server
    Verifying Host Names
    1) Verify that the /etc/hosts file is formatted as follows:
    127.0.0.1 localhost.localdomain localhost
    <ip_address> <node_name>.<domain_name> <node_name>
    2) Verify that the /etc/sysconfig/network file is formatted as follows:
    HOSTNAME=<node_name>.<domain_name>
    3) If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
    4) If you changed any files in the previous steps, restart the system.
    Modifying the Number of Open File Descriptors
    Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes (If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter):
    * hard nofile 65535
    * soft nofile 4096
    * hard nproc 16384
    * soft nproc 2047

  • Please tell me step for installed Oracle 9i in Linux 8.0

    Please tell me step for installed Oracle 9i in Linux 8.0
    Please update me on [email protected]
    Thanks in advance

    Have a look at: www.puschitz.com/InstallingOracle9i.html
    cu
    Andreas

  • Db size for installing oracle vanilla

    HI,
    can u please guide me the db size required for installing oracle vanilla
    and also provide the document for the same
    Regards,
    praavan

    user8646564 wrote:
    HI,
    can u please guide me the db size required for installing oracle vanilla
    and also provide the document for the same
    Regards,
    praavanHow long is a string?
    How deep is a hole?
    How much will it cost to build a bulding?
    The size of the db is highly dependent on how much data you store in it.
    The installation guides (already mentioned) will specify minimum prereqs.

  • Laptop config for installing oracle apps

    Hi All,
    what could be the best config and brand for installing oracle apps in laptop for learning purpose? Will oracle apps supports Windows Vista as most of the current laptops has Vista as the default OS?
    I have tried installing oracle apps in desktop and not in laptop yet.I found in the net the below steps is one of the ways to install oracle apps in laptop.
    1.Install VMware on windows OS (Virtual Machine)
    2.Install enterprise linux
    3.Install oracle apps
    Pls let me know if anyone have installled oracle apps in laptop.
    Thanks in advance
    kumar

    Hi Kumar,
    Yes, for learning Vista/VMWare/OEL/Apps would work, but note VMWare not supported on Vista but it does run (boot using Disable Driver Signing) and you might find Linux VMs take 20-30mins or so to start the first time after host boot. Also I'd turn off the Vista frilly bits!
    Specs - get something recent, the better hardware the faster it runs! For Vista and R12 on VMWare I'd say you'd want 4GB memory, fast dual core CPU and tons of disk. Also you'll want Vista 64 to get the best out of the memory (and if you want more than 4Gb). Some laptop brands come with options for different OS's like images on DVD or hidden on the harddisk that you can easily reinstall.
    PS. Laptops are like desktop's these days, not a huge difference in specs...
    PPS. If you want a less painful option try to downgrade to Windows XP (watch memory limits), still lots of hassles with Vista.
    PPPS. I'd go for OpenSuse (Suse clone) or Centos (RedHat clone) over OEL for learning machine due to no subscription for updates, etc.
    Drop me an email if you want.
    Regards,
    Gareth
    http://garethroberts.blogspot.com

  • Pre installers for installing Oracle Utilities Application Framework V4.0.2

    is there any pre installers for installing Oracle Utilities Application Framework V4.0.2 for Meter Data Management V2.0.0 Multiplatform??
    reply me asap.
    regards
    vijaya

    It would help if you provided osme basic information like what version you are installing, what operating system, 32 bit or 64 bit. We may like to help but we are not mind readers.
    If you happen to be installing one of the latest versions of the framework (CC&B FW 2.2 SP 8) there is an issue.
    You may have to start off with hibernate 3.2.5 then run the framework installation.
    This may not do a full install but you may find that only 1 or patches have not been installed and the issue is that these require hibernate 3.2.7
    So go back and install the hibernate 3.2.7 and change the environment variables to point to the new version.
    Re-run the framework installer.
    You may get errors in that the patches that did not previously install properly cannot be installed.
    This is because they have entries in the etc/installed_fixes.txt file.
    edit the etc/installed_fixes.txt file and delete the patches that will not install.
    re-run the installer now and the rest of the patches should now install
    The 2 offending patches may be 9384543 and 9080333.

Maybe you are looking for

  • Can't update the data of my credit card

    My credit card information was changed. Now I can't update this data on my account since days. Any idea, why?  the error message is 'Card is invalid, please check card details'. thanks

  • Problem with the Titler WIndow

    Hello, I don't know how it happened but the titler window is saparate in 2 windows : one with the title by it self and the other one with tools and buttons. How is it possible to have only one window again ? Thank you for your help and regards, Danie

  • I need a qualifying copy of iWeb

    help me  please send me a qualifying copy of iWeb

  • Difference balance in G/L (FS10N)

    Hi All, One of our G/L is showing balace in "Cumulative Balance" in Group Currency. Our client want clear-off this value. How, we can solve this issue.. Please treat as Urgent.. Thanks in Advance..

  • Java.io.NotSerializableException: java.awt.BasicStroke - really confusing

    I have a class Box which has two member Size and Location, both Serializable. Then I have several classes (e.g. Node) which extend Box. None of all the classes (Box, Size, Location and all extensions of Box e.g. Node) use BasicStroke. I commented out