Configuration of email service in Storm 9530

Hi. My Storm 9530 working fine.But I couldn't configure BB email service in my device. Tatadocomo India is my service provider: Tips pl
msaffique

Does your service provider offer BB data services? You need a special BB BIS data plan in order to configure email.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Catching of SMTP Failure in JDeveloper 11g in Email Service

Hi,
I am having a requirement to send Email using Jdeveloper.
I have configured the email service but for a test case i made a change of port in my SMTP server but the email service did not returned any error in JDeveloper and i was not able to catch it.
It neither send the email but in weblogic server logs error was there regarding SMTP Server but how can i catch the same in my Jdeveloper 11g in case SMTP is down.
Kindly help me in this ASAP.
Regards
Prateek

This is overly complicated. you post the code of you command link?
should work without any java code by setting a property listener which the from value set to the value of the link and the to property to the of the input text.
Timo

Storm 9530 Personal Email Setup Option not there

I recently just bought an unlocked Blackberry Storm 9530. I am new to the Blackberry OS. I put in my SIM card and texting and calling works fine. I am trying to use my Yahoo email on the device but I cannot configure it. When I go into Email Setup, there is no option for "I want to create or add an email address" but only "I want to use a work email account with the BlackBerry Enterprise Server". I don't have an Activation code so I am look for the option to add a personal email. The problem is that it is not there to select. What should I do?

You need a specific BlackBerry data plan on legacy devices. If you do have it, then for some reason you didn't get the service books. If you don't, then once you add it you will receive the service books and then have the capability to set up Internet email.
Contact your mobile service provider. Either add the BlackBerry plan if you need it or else have your service provider check your account if you are supposed to have the plan already. And your provider can resend service books if that is what is needed.
- Ira

Configuring Outgoing Email in SAP Basis Services

Hi gurus
Can any body tell me the step by step procedure for how to configure outgoing Email in SAP basis services
Thanks and regards
S.Satyanarayana Raju

Hi Satya,
U can configure out going mails from your SAP system by using SMTP.
have a look on the below link.. u can get complete picture of the mail configuration.
http://help.sap.com/saphelp_nw04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
they have explained every thing clearly there and also have a look on the below note.
SAP Note 1205132 - Configure SMTP Destination to use multiple email servers
Cheers and have fun.
-Srini

Issue on OSB business service configuration with email transport

Hi,
I am trying to create a Business Service with email Transport configuration. While creation, I have selected ServiceType as MessagingService.Then in Message Type Configuration page have selected Request Message Type as Text and Response Message Type as None. Now in Transport Configuration page email option is not showing in protocol.It's only showing http , jms option there.
While I tried the same in some other OSB installation environment I am able to find email option in Protocol.
Any idea what could be potential reason of it.How can I able to see email option in Protocol ?
Regards,
Subhra

Hi,
Please check the state of Email Transport Provider in the admin console it should be in the active state , and also Go to JMS Module --> jms resources and check dist_wlsb.internal.transport.task.queue.email_auto.
its heath and assosiated member will be working fine.
Regards
Bharat

Problems with Storm 9530 after software update

Greetings, I am new to this forum and hope I am in the right place.
After an email prompt from BlackBerry, Yesterday, I updated my software on my Verizon BlackBerry Storm, 9530.
Now I have several problems;
1. Voice commands are not being recognized as easily as previously, making hands free calling almost impossible.
2. Pandora will stall near the end of each selection. The song will resume after I push the pause and then the play button.
3. When I attempt to live stream from a local radio station, I get the following message: "! This playlist contains no valid songs"    Buffering... is displayed in the upper right hand corner, but no connection is ever made.
Any ideas what I need to do to fix the thing?

Hi and Welcome to the Forums!
1) A known bug...we all hope that RIM is working on a fix.
2) A known bug...Pandora is working on a fix. I have heard that it is available on their website but not yet via AppWorld.
3) Very difficult to diagnose...it could be the website itself...it could be your device browser settings....it could be a number of things. Try these steps.
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Register with VZW:
Dial *228, select option 1
Dial *228, select option 2
Register HRT:
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
Resend Service Books:
KB02830 Send the service books for the BlackBerry Internet Service
Websites can be coded to perform better with some browsers rather than others. The BB Browser can appear to websites as several different things...that setting is, from within the Browser App, (BBKey > Options > Browser Configuration > Browser Identification). Changing that to another browser might help your BB interact better with some websites. In combination with all of the other configuration settings, you need to find the combination of all of these settings that works best for the sites you are visiting. Sadly, there is no "best advice" to give as each persons needs are different. But, I typically find that changing the Browser Identification often helps -- most often by changing to FF or IE (if those are available to you...the options vary by carrier).
Hopefully something in there will get you going again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BB Storm 9530 sync with calendar

I am a Verizon FIOS customers partnered with Yahoo! Can I sync my BB Storm 9530 calendar with my Yahoo calendar? Or can I sync with my Verizon calendar? Is this accomplished using the BB desktop software? My son uses this method with Outlook but I no longer use that calendar/email.
TIA.

Klaus wrote:
OK. Bear with me here. I receive both Verizon and Yahoo email on my BB already. Do I still need to set up something else?
Ok, no. You have already done that, good. All you need to use is Blackberry Desktop Manager to syncronize the data on your desktop. Go to http://na.blackberry.com/eng/services/desktop/ for more information. For any troubleshooting with the program, go to http://na.blackberry.com/eng/support/software/desktop.jsp for more help. I hope this helps.
Doc

Storm 9530 started freezing after 2 yrs... help!

I have had the BB Storm 9530 on Verizon for 2 yrs. I updated to OS v 5.0 when it first came out. I close out programs & I have Quick pull to reset it every night. Just in the past 2 weeks it has started to freeze relentlessly, requiring a battery pull. When frozen during a screen saver mode, the right "return" & red phone buttons are lit and the back light of the screen is on, but no response. If the screen is being used at the time of freeze, the buttons as above light up, as well. Sometimes it will work for an hour before freezing, sometimes only 1 minute between reset & freezing. I have, cleared the cache & temp memory, deleted all 3rd party programs & re-installed the 5.0 OS via USB connection to the PC with no improvement. Interestingly, the phone will ring and message alerts activate while it is frozen, but I cannot answer or silence the alarm. Also when typing either txt or email there is a huge lag between type and appearance on the screen. I can type a whole sentence without it appearing, sometimes if I click on the message bar the sentence will suddenly appear, more often than not it requires a battery pull, however. At night I place it a BB dock, in the morning the clock will be frozen at a random time during the night, however the alarm will sound at the correct time (so its the screen, not the clock freezing, I assume). File free = 48507482 before battery pull & 48397366 afterwards. This all occurred with no new programs added, changes or trauma to the phone. Any help?

gotcha, I didn't know when you did the software reload, but you did use the latest update. Great idea of not doing the update over the air.
What about downgrading the device software to a previous version? You might be able to do this but I don't know what will be available in the "other versions" button in the desktop manager. If the downgrade isn't possible or doesn't improve system performance, only other option is to get an upgraded phone.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Mail configuration in shared services

Hi,
I have configured SMTP Mail Server name in the shared services but still not able to send HFR and Web analysis reports through email.
When I click on Email Link in WOrkspace on a particular report, getting below error:
Enter the user email address in Hyperion Shared Services, Ask your Administrator to update your email address listed through Hyperion Shared Services.
What needs to be done to avoid this issue? do I need to enter user's mail ids in Admin mail field in Shared services configuration page. If yes, how can I enter all user id', i mean, any comman's or some delimiters in between mail id;s.
Please advise me on this..
Thanks,
UB

Hi Gurus,
Can anyone provide your suggesgtgions on this issue please.
I added SMTP mail server name and configured the shared services but still the Email option is not enabled in Web analysis and workspace to send reports through email..
I even gone through installation materials but of no help..
Awaiting for your suggestions on this... Thanks, UB

How setup email services in Portal?

Hi experts,
How to setup e-mail services in portal? I'm only on JAVA stack having EP-CORE,EP, BI_JAVA, and AS JAVA installed. I have to do CCMS configuration but how would I setup email services?
Please be kind enough to provide me proper path.
Your input is really apreciated.
Thanks,

Hi Afi,
To set up e-mail connectivity in your Portal, go through this link
[E-mail connectivity|http://help.sap.com/saphelp_nw04s/helpdata/en/3b/10083f56e4d861e10000000a114084/content.htm]
Also go through this PDF,
[Integrate Microsoft Exchange Server in Portal|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08def089-0a01-0010-9c82-ee2040b4eced]
Hope this helps,
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 19, 2008 1:03 PM

Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device

Hi
I just got this message yesterday: Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device.
And since then, i havent being able to set up more than one email and i subscribed for 4.
I have rebooted\,, sent service books and hard set the phone so many times.
What should i do?
Thank you

Hi and Welcome to the Community!
From your post, I cannot quite tell if you did all of this, in exactly this way. Hence, with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Retrying Email Service fails for the stalled Operations:

Hi,
Some of the send email operations randomly fails due to invalid recipients address or some connectivity issues with SMTP server. Once we do the corrections to the service, and retry those stalled operations, its erring out with Java Nullpointer exception.
Stalled operations work fine for other operations except for email service. Is this a Engineering issue with the Adobe design or do we need to change any configuration settings to make that work?
Thanks for your time.
Regards,
Krishna

Hi Aashish,
Thanks for the response. Yes, it works good for new operations. It fails with Null pointer exception if I retry the stalled ones after corrections.
This was the initial error -
Failed to connect to email server: adobemailer@xxxxx. Reason: Could not connect to SMTP host: xxxxx, port: 25, response: 421: com.adobe.idp.dsc.email.ConnectionFailedException: Failed to connect to email server: adobemailer@xxxxx. Reason: Could not connect to SMTP host: xxxxx, port: 25, response: 421
We corrected the problems with SMTP server and when we retried this stalled operation, this is what we see -
( Email has an attachment, I 'm thinking adobe is not catching up the attachments when I retry it again)
com.adobe.idp.DocumentError: com.adobe.idp.DocumentError: java.lang.IllegalStateException: No transaction
          at com.adobe.idp.Document.getDataBuffer(Document.java:2134)
          at com.adobe.idp.dsc.email.EmailServiceImpl.assembleAttachments(EmailServiceImpl.java:533)
          at com.adobe.idp.dsc.email.EmailServiceImpl.setMessageBody(EmailServiceImpl.java:496)
          at com.adobe.idp.dsc.email.EmailServiceImpl.sendWithMapOfAttachments(EmailServiceImpl.java:4 26)
          at sun.reflect.GeneratedMethodAccessor7169.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
Regards,
Krishna

Windows Server Essentials Email Service Won't Start SharedServiceHost.exe Unhandled exception from operation

Gday Everyone,
Two weeks ago we installed a new Server 2012 R2 with the Essentials Experience role. It was fully patched at time of deployment. We enabled O365 integration and password sync was working fine last week. This morning I went to the Dash Board to add a new
user and after clicking the O365 tab all fields show "Not available".
The system event log shows
"The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)."
The application event log shows the following.
System.InvalidOperationException: Nullable object must have a value.
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<GetSubscriptions>b__37(Subscription sub)
   at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<>c__DisplayClass32.<GetCompanyInfo>b__30(AccountSkuDetails s)
   at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.GetCompanyInfo()
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementCore.QueryO365Information()
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.ProviderBase`1.InvokeOperation[TResult](String operationName, Func`1 func)
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementProvider.InvokeOperationWrapperAsyncWithLocalAdminPrivilege[TResult](String operationName, Func`1 func)
   at SyncInvokeQueryO365Information(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker invokeMe, Object instance, Object[] inputs, Object[]& outputs)
Stack:
   at System.Environment.FailFast(System.String, System.Exception)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker, System.Object, System.Object[], System.Object[] ByRef)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener.Invoke(System.Object, System.Object[], System.Object[] ByRef)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
   at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.AsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]].Complete(Boolean, System.Func`1<TryReceiveResult<System.__Canon>>)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.CoalescingAsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._MyCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
   at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Net.LazyAsyncResult.Complete(IntPtr)
   at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
   at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
   at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
   at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
   at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
   at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
   at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
   at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
The only thing we did a few days ago was enable the Azure Backup integration. I am not sure if this broke the O365 integration as I didn't go back to the O365 tab in the dashboard after installing the Azure backup.
I have spent a considerable amount of time on google, however, majority of the posts talk about Update 1 which disables the password sync service. I have checked and all services are started with exception of Windows Server Essentials Email Service (WseEmailSvc).
The Azure Backup module is working fine and the registry location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Server\Productivity seems to hold the correct configuration information throughout the various keys.
I am at a loss as to how to proceed with this issue? I have checked but there are no pending updates and I have attempted a server reboot numerous times.
Would appreciate external input if you have seen this issue before or know where we can look to further establish what is going on.
Cheers,
Chiper

I have a similar if not identical situation - I'm currently migrating from WS2012 Essentials to WS2012 R2 Standard w/Essentials role installed. The 'wseemailsvc' service continues to fail over and over, and I am unable to manage O365 accounts from within
the Essentials dashboard on the R2 server.
System Event Log:
Error 7031 - The Windows Server Essentials Email Service service terminated unexpectedly ... [repeats twice]
Error 7034 - The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)
Application Event Log:
Source: .NET Runtime
Date: 2015-04-20 08:27:28
Event ID: 1026
Task Category: None
Level: Error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21137</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.UnauthorizedAccessException
Stack:
at System.DirectoryServices.Interop.UnsafeNativeMethods+IAds.SetInfo()
at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper+<>c__DisplayClass3.<SetLocalUserPrincipleName>b__1()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper.InvokeOperationImpersonateWrapper(System.Action)
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.CleanUpMappingData(Microsoft.WindowsServerSolutions.O365Integration.O365User[])
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.Run()
at Microsoft.WindowsServerSolutions.O365Integration.BackgroundTask.TimerCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</Data>
</EventData>
</Event>
This error is followed immediately by:
Source: Application Error
Date: 2015-04-20 08:27:28
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21138</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>SharedServiceHost.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215ca62</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>e0434352</Data>
<Data>0000000000008b9c</Data>
<Data>20e4</Data>
<Data>01d07b761ad593b2</Data>
<Data>C:\Windows\System32\Essentials\SharedServiceHost.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>5f028783-e769-11e4-80c4-00155d10040b</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Any assistance with this would be greatly appreciated!
mcbundus

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

Configure TNS Name Service

How configure TNS Name Service in Server and Client?
Thanks.

On the server you may not need that, on the client.... neither...
On the server you need the listener (which you should already have), on the client you can use the easy connect method, which does not require any configuration :
sqlplus username/password@<servername or IP address>:<port>/<sid>
for example
sqlplus scott/[email protected]:1521/orcl
the port is not mandatory if it's 1521.
Of course you can configure TNS aliases within tnsnames.ora, both on client and server, here an example :
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = XE)
)See http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/naming.htm#i507143

Configuration of email service in Storm 9530

Similar Messages

Maybe you are looking for