Configuration Page Garbled on WRT54G V5

Hi,
When I access my router via 192.168.1.1 the page is garbled. ie links are missing and there are bits missing on the page. This happens if i access the router from my PC or remotely from my laptop. Laptop is on Xp and PC is on Vista.
I guess reloading or upgrading the firmware will fix but I cannot get to the configuration page to do it. Is there any way of upgrading the firmware without using the router's config page?

try disabling the firewalls of the computer that you're using and also update the router's firmware using this website → http://www.linksys.com/downloads and also try using the knowledge based website → http://www.linksys.com/kb to follow the steps on how to properly upgrade your firmware... hope this helps...
♥ Registered TradeMark Since 1987 ♥

Similar Messages

WRT54G Configuration page in spanish - Help

Hi folks, I have just bought a WRT54G v5 and went through the setup wizard with no problems. However when attempting to access the configuration page (http://192.168.1.1) it appears in spanish. I have updated the firmware in management mode but still get the same problem. Anyone have any ideas on how to solve this problem?
Thanks in advance.

your device is wrongly shipped...
try downloading a TFTP file... and try to reflash a firmware from the US website..
this solution will not guarantee that it can solve your issue..
(Mod note: Edited for guideline compliance.Thanks!)Message Edited by JOHNDOE_06 on 10-18-2006 11:50 PM

WRT54G's Configuration page wont load after firmware update.

I recently updated the firmware for WRT54G v3 and now when I connect to the configuration page it's jumbled and no options load. Is there a way I can reflash the firmware on the router via a program. I am kinda in the dark on this one so please help. On the brightside now my NAT settings on my 360 are open.

Go to www.linksys.com/downloads. Open product BEFW11S4 and choose version 3.0. Then on the downloads menu download the BEFW11S4 Set-up Wizard. Run this software, Server is the router (192.168.1.1), password is admin, file is the firmware for your WRT54G and then hit upgrade.

WRT54G Configuration Page Problem

Hi, I'm having a tiny problem. When I select save changes to anything on the configuration pages, it doesn't say Save Successful anymore but it did before, it's just a white screen. Any ideas?

Are you trying to configure it wirelessly? If yes then first of all hardwire a PC to this router and then try to configure it. It may also be the issue with the IE settings. Try deleting temporary internet files and cookies from internet options. Reduce the security and privacy settings to low. Upgrade the firmware if needed.

Configuration page lost

Greetings!
Before I go any further here is the router I am dealing with:
Linksys WRT54G
Version 3
s/n CDF80E1 05393
Yes I am aware that this is rather old unit.
My problem is this, I have turned this router into an access point, connecting it to the 2wire router that was given to me by my DSL company. I made the 2wire IP 192.168.1.254 and the linksys router's IP 192.168.1.1. Now after intial setup I can no longer access the linksys router's configuration page. I go into internet exploder and type into 192.168.1.1 and it pretends that there is no such page. I do not even get the pop up window asking for the user name and password to log into the router. How do I find this page again so I can make further adjustments to my linksys settings?
Just for clarification the access point works quite well. The devices I connect to it are able to connect to the internet with no problem. I just can't find the configuration page.
Any help would be greatly appreciated.
Jason

Disconnect all the cables from Linksys router.
Connect the computer to the Ethernet port 1 on the router. Press and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router. Try to open the setup page of the router using 192.168.1.1.
You want to use WRT54G router as access point.
Change the wireless settings as required.
Click on setup tab and disable DHCP server. Save the settings.
Connect the cable from AT&T router to Ethernet port 2 on WRT54G router.

Error on External Serrvice Configuration Page NW 20047s SP10

Hi All,
I am working on CAF developement. I was trying to develop an CAF application using External Service. I used SAP ECC 5.0 server to import a RFC functional module. It was successfully imported in NWDS. Also it got successfully deployed on the Server NW2004s SP10. But when i opened external service configuration page -> service registery it gave me a null pointer exception.
To solve the problem, i removed the RFC functional module from NWDS and
re-deployed the same application, but the error is still there.
One solution i got is to undeploy the application from the server. After doing this I was able to get the External service configuration page -> service registery without any error. BUT WHEN I DEPLOY THE SAME APPLICATION REMOVING THE RFC THE ERROR IS COMMING AGAIN.
I think there must be some entry on the server which stores the External services imported on the NW 2004s server.
Please Help. ITS VERY URGENT
thanks in advance,
Regards,
Sheetal

I am not using date in my program. Follwing is my error.
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
    at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
    at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
    ... 47 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Thu Dec 28 17:06:00 GMT+05:30 2006
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Fri Jan 12 09:47:51 GMT+05:30 2007 (Java Time: 1168575471082)
Web Dynpro Code Generation Infos
sap.com/cafUIconfiguration
SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.RuntimeException: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
     at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:661)
     at com.sap.caf.wd.services.registry.VwOverview.wdDoInit(VwOverview.java:133)
     at com.sap.caf.wd.services.registry.wdp.InternalVwOverview.wdDoInit(InternalVwOverview.java:275)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
     at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:208)
     at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:657)
     ... 46 more
Caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getExternalInterfaces.
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:493)
     at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
     ... 47 more
Caused by: java.lang.NullPointerException
     at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
     at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
     ... 48 more
Thanks and regards,
sheetal

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

How do I print a configuration page from a Mac with Snowleopard?

How do I print a configuration page from a Mac with Snowleopard? Printer is workinhg fine, but I just put in a new cartridge and I'd like to know how many pages I'm printing.
Dave

Hi there Dave, aka @dewanio , welcome back
I saw that you are looking to print off a configuration page.
The printer itself will print a test page however, the model depends on how it will print. Let me know which printer you have and I will get back to you!
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error Destination in JMS Transport Configuration page (Proxy Services)

Hi, Can anybody provides me the sample of Error Destination in JMS Transport Configuration page (Proxy Services) .I need to know the format. I am using "jms://<host:port[,host:port]*/factoryJndiName/destJndiName>", but it does not work.
From Oracle webstie, http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/interopjms/transport.html, the detail description of Error Destination is " In this field you can configure the name of the target destination for the messages, which have reached the maximum number of retry count. "

Can you provide the JNDI name of the error destination alone there ?

How to reprint the Device Configuration page?

Im installing my new printer for first time and was parially thru the wireless connection option set up and it printed off the Device Configuration Page but the page was partially blank and now I need the printer IP address to complete the install and set up. how do I find that? where?

Please read this post then provide some details. What printer model?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

DONE button is not working in Oracle Configuration page in Order Management

Hi,
We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
Please help us to come out ot this problem.
Thanks
Krishna

Hi,
We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
Please help us to come out ot this problem.
Thanks
Krishna

OJ 6000 prints Configuration page when ink is low

This 5-month old printer prints a "Network Configuration Page" one after another whenever a cartridge shows a low ink warning. Only stops when the paper source is removed.or cartridge changed. Printer has been uninstalled and reinstalled with current downloaded driver. HP Pavilion a1710n computer, Vista SP2 OS, USB connection. Appreciate advice/cure!

Hi @Debbie18
I would like to help you with your Deskjet F2280. Please use the following document to troubleshoot the issue; Faded or Dull Colors in Printouts.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Accessing the online web-configuration page

I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
401 Bad Request
cannot use wireless interface to access web.
Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page?
Thanks in advance

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

I have a macbook 10.6.8 I am getting a internet configuration page when i try to boot safari. How so i get rid of this page. Thank you.

I have a macbook OS X 10.6.8. I was messing around with java yesterday and now I get a Internet configuration page when I try to launch safari . How do I get rid of this. Thank you.

Can you post a screen shot?

Configuration Page Garbled on WRT54G V5

Similar Messages

Maybe you are looking for