Configurations Flash Access Server for Protected Streaming
Do anybody have informations, how configurate files flashaccess-global.xml and flashaccess-tenant.xml?
I now that Flash Access Server for Protected Streaming ignored content policy, and policy have to set in that configurations files.
Where can I read about that? Very small informations are about that
Thanks
Hello,
Please check chapter "Deploying the Flash Access Server for Protected Streaming" in http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf.
Best regards,
Wang Chao
Similar Messages
-
Adobe Access Server for Protected Streaming Configuration Problem
I cannot get the Adobe Access Server for Protected Streaming sample implementation up and running. Could somebody help me figure out where I'm going wrong?
I've configured the license server with the correct PFX files and when I run the validation tool, I get the following output. This is a clean install with only the license server configuration (the content server is a separate machine). I also get a similar error in the tomcat logs when I try to access a piece of content licensed to this server.
$ java -jar libs/flashaccess-validator.jar -g -r /var/lib/tomcat6/licenseserver/
Validating global deployment ...
Validating partition deployment - flashaccessserver...
Validating tenant deployment - flashaccessserver/mediafly...Failed to validate tenant deployment 'flashaccessserver/mediafly' - Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
See log for details:
(/tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log)
$ cat /tmp/temp281722781181937073071254678876423/flashaccessserver/flashaccess-partition.log
[] 2013-02-12 15:37:26,383 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/, file:/var/lib/tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext -sample.jar]'
[] 2013-02-12 15:38:41,247 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/mediafly'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading key server certificate for partition='flashaccessserver', tenant='mediafly'
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:720)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.<init>(TenantConfigurationImpl.java:705)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:115)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: java.security.cert.CertificateException: java.lang.IllegalArgumentException: unknown object in factory: org.bouncycastle.asn1.DERInteger
at org.bouncycastle.jce.provider.JDKX509CertificateFactory.engineGenerateCertificate(Unknown Source)
at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:322)
at com.adobe.flashaccess.core.crypto.CertUtil.loadCert(CertUtil.java:33)
at com.adobe.flashaccess.sdk.cert.CertificateFactory.loadCert(CertificateFactory.java:45)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCert(TenantConfigurationImpl.java:739)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl $ServerCertsImpl.readCerts(TenantConfigurationImpl.java:718)
... 8 more
Some additional information:
$ uname -s -r -v -m
Linux 2.6.32-350-ec2 #59-Ubuntu SMP Mon Jan 7 14:20:59 UTC 2013 x86_64
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.04.4 LTS
Release: 10.04
Codename: lucid
$ dpkg -l | grep tomcat
ii libtomcat6-java 6.0.24-2ubuntu1.12 Servlet and JSP engine -- core libraries
ii tomcat6 6.0.24-2ubuntu1.12 Servlet and JSP engine
ii tomcat6-common 6.0.24-2ubuntu1.12 Servlet and JSP engine -- common files
$ dpkg -l | grep jdk
ii openjdk-6-jre-headless 6b24-1.11.5-0ubuntu1~10.04.2 OpenJDK Java runtime, using Hotspot JIT (hea
ii openjdk-6-jre-lib 6b24-1.11.5-0ubuntu1~10.04.2 OpenJDK Java runtime (architecture independe
$ md5sum AdobeAccessProSDK_4_0_LS1_java.exe
73068d8348cbdc1c29211a463a58b8df AdobeAccessProSDK_4_0_LS1_java.exe
Thanks,
BryanI found the problem.
Certificates/KeyServer/File[@path] needs to be set your license file, but it must be in the ".cer" format. The server won't start without this fileand it was not mentioned anywhere in the quick start guide but is mentioned in the protected streaming document.
Bryan -
Why don't my DRM policies seem to work? Using "License Server for Protected Streaming"
Do you find yourself setting rights/restrictions in a DRM policy (like disallow playback on Linux), only to see that the right/restriction isn't being enforced when you play your content? There may be several reason causing this to happen:
1. If you are using the "Adobe Access Server for Protected Streaming" that came on your ESD/DVD, this streaming-only server is configured to specifically ignore any policy that was used to package content. Instead, the server itself overrides the entire packaged policy and instead, reads rights from its tenant configuration XML file (flashaccess-tenant.xml) to generate licenses issued back to the requesting device.
2. Is your license server configured to use a PolicyUpdateList? This is a list that can be used to override any old policy (according to its Policy ID) and to use a newly defined policy instead. This is useful if content was pacakged with a policy and then afterwards, the business rules have changed for the particular policy, warranting an across-the-board change to all content packaged with that particular policy. Using a PolicyUpdateList is essentially a way to version your older (already used) policies.
3. is your license server overriding the policy manually in its code? If you're using the Reference Implementation license server (or building your own server from the SDK), your server has direct access to the policy. The server can add/remove/change any right in the policy before using it to generate a license for the requesting device. If you're using the Reference Implementation, by default, it will simply generate a license directly from the policy without any manipulation to it.
4. Are you sure you re-packaged your content using the new policy where you made your changes? On your license server, since you have access to the policy (it's sent up to the license server as part of the license request), the license server can log the policy ID of the policy. Check your logs to verify the new policy is actually being used.
5. Are you sure you're playing back the newly-packaged content? Caches may be stale.
cheers,
/Eric.Not possible with a POP account.
The email account sync process with iTunes syncs (or transfers) email account setup information for select accounts only from your computer to the iPhone. This does not not involve messages.
The reason the account's Inbox mailbox seemed to sync is because received messages with a POP account are the only server stored messages and if not removed from the server when downloaded by one email client can be downloaded from the server by another - in this case the iPhone.
If you want Sent messages kept synchronized between your computer's email client and the iPhone's email client, you MUST use an IMAP account for this purpose. -
How To Use Flash Media Server For RPG Game Development Project ?
I have a educational music video game development project (A Sea Voyage) for whcih I am thinking to use the Adobe Flash Media Server for develping the 3D Game for which I plan to also use two other key tools, blenderartist.org for 3D Creation of my ship, and use the popular game engine tool, unity.com to integrated all my game elements.
How to use the Adobe Flash Video Streaming Server Element for this RPG Type Game, internet friendly and desktop anchored ?
Cafe Twin
Metro Washington DC HubI'm more or less in the same boat. I've got the admin console
up. I am able to run the vodtest application locally pointing the
video file to rtmp://localhost/vod/sample.flv or using the server
name instead of localhost as in rtmp://mclmedia/vod/sample.flv
I can also load the html and swf file to my xp machine that
has access to the server via our internal network. (DNS isn't
configured yet) But the connectionFailed message appears when I try
to call the videos using rtmp://mclmedia/vod/sample.flv -
Hi,
I am developing an app for iPhone/iPad. The client wants to show some realtime data in the app. Something like a chat application, where even if users don't do anything (flash uses no event), they can see what other users are doing in realtime.
I went through adobe site to see Flash media Server for mobile device. But I am confused on which version of the server should suit the type of app I am developing.
Thanks,
SalimI'm more or less in the same boat. I've got the admin console
up. I am able to run the vodtest application locally pointing the
video file to rtmp://localhost/vod/sample.flv or using the server
name instead of localhost as in rtmp://mclmedia/vod/sample.flv
I can also load the html and swf file to my xp machine that
has access to the server via our internal network. (DNS isn't
configured yet) But the connectionFailed message appears when I try
to call the videos using rtmp://mclmedia/vod/sample.flv -
How to configure the Access Server?
Hi All
I am in the process of migrating from 11.0.1 to 12.0.
I have some real-time jobs.
For this I need to configure the Access Server.
I can understand I should do this from Server Manager>Edit Access Server Config>Add
Here what info we need to give? Does it mean we need to give the server name on which current version is installed? How to choose the port?
My old version DI 11.0.1 is using port 4000. Also in the DS Mgmt Console, I am defaultly getting the Old Job Server in the Adapter Config node. How to remove this?
Someone plz help me on this.
Thank You
Ganesh SampathYou have to explicitly share directories on external/secondary volumes.
Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients. -
Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAILHello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps -
Error CIM_ERR_FAILED - Configure the integration server for sld
Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement -
Help configuring Flash Media Server
Hi All
Can anybody help in configuring FMS2 on a local machine so
that I can test some sample applications.
My main aim is to abe able to stream live video and audio
using FMS 2.0 .
I am completely new to flash and FMS so any help will be
highly appreciated.
Regards
-Rajif use the default setting
you may create a folder under the
{ $ media server root }/applications/....
for example:
the folder named "test",
maybe like this:
"C:\Program Files\Macromedia\Flash Media Server
2\applications\test\"
then
in the FLA:
you may connect like this
myConn = new NetConnection();
myConn.connect("rtmp:/test");
or
myConn = new NetConnection();
myConn.connect("rtmp://localhost/test"); -
Configuring Mountain Lion Server for iOS MDM
Hi all,
I am an admitted newbie to the Mac world. That said, I am in the process of setting up an OsX 10.8 server to handle the MDM for our iPad deployment. This is in a school district that runs all Windows in Active Directory.
I attempted to do the setup with no luck. So, I tried to reset the server back to the defaults and found that the settings I had made previously were still there.
What I need to know is how should I go about getting back to essentially scratch with this setup? Once I have that, what is the correct setup process to get me to where I can enroll the iPads to do the wireless MDM? We do not need to have access to the server from any other devices. No other services are needed like email, file shares etc. We have several sites on many different subnets but all on the same network.
A few specifics I do need to know is which network configuration would be preferred for our type of network? I'm thinking Private since everything will be handled internally. Also, regarding the certificates, is an SSL certificate required? And last, I read that there are some TCP ports that need to be opened. Is this required if we are running strictly internal with this?
Sorry for rambling on and my inexperience. I appreciate any help anyone can give.
Thanks!You can use .private but if there is EVER the possibility that this would be used outside your LAN, then I would use a FQDN.
You do not need a commercial certificate. A self-signed will work fine.
The default self-signed has a 1 year expire. If you don't want to deal with updating the cert in a year, I would create a new 5 year cert.
This option is harder to find now with mountain lion.
From the Certificates section in Server, first click the gear and choose 'show all certficates', then hit the + button and choose 'Create a trusted certificate'. You will see a button to override defaults. This allows you to have a different expire date.
You can reset the profile manager data (stored in postgres) with:
sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB.sh -
Configuring a Directory Server for Digital IDs and Certificates
My company is moving toward using electronic signatures for internal documents. All of the users are on XP machines and have Acrobat Professional 8.0 installed. So far, I've been manually adding trusted IDs for each person who will be receiving signed documents that need to be validated. I'd like to make this a little easier by storing everyone's certificates on a server (Windows 2003) so that people can just go out there and add them all as one .fdf file. What I'm wondering is, what is the difference between doing it this way versus going through Acrobat and configuring a directory server? Will it work either way?
Thanks!
AnitaHi,
Sorry for the late reply, regarding the error message: The DHCP services could not Contact Active Directory,
please check the below KB article to see if it could help here:
You are unable to authorize DHCP Server in Active Directory
http://support.microsoft.com/kb/303317/en-us
Reference for error ID 1059, and
error ID 10020.
For The specified server are already present in the directory services,
please take a look into the below Blog:
Active Directory DHCP authorisation issues
The method mentioned in the blog above is trying to move the old information that stored in AD, and then take an action of re-authorisation of the DHCP server.
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to configure a proxy server for Windows Azure Tools in Visual Studio 2013
Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaenaAs we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp -
Error while configuring the application server for ESB on Jdeveloper
While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilayi tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....
-
Proper Configuration of DNS server for our new branch office
Hi All,
Our new office will setup a new branch office with a routed network link to our HO. In HO, we have 2 domain controllers configured as AD and DNS just for fail over scenarios.
How will we configure the DNS server of our 3rd domain controller which we will placed in the new branch office. What would be the proper settings of DNS server integrated to AD to work well especially to have a successful replication and communication to
the 2 DC's located in HO?Hi,
If you have multiple DC's in that site i would recommend using any of the partner DC's IP addresses as preferred one and secondary DNS IP to pointing to itself. Dont use loopback addresses configure it with actual IP addresses.
If you have only one server in branch office point itself as the primary DNS and HO DC as secondary and tertiary.
Make sure that all clients in your branch site are pointing to the branch DC as primary DNS server.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
Enough bandwith to usa a NAS server for itune & stream via Airport Express?
Hi,
i posted this question in the itunes forum, but got zero feedback. i was hoping someone here could possibly answer my question :
I was thinking of getting a ByteCC LANDisk NAS to use as an itunes music 'jukebox' server for 2 macs (a G5 and a macbook). I have a Airport Express that i'd like to use to stream music to my living room stereo via itunes,
My question is is there enough bandwith to stream from the NAS server to the macs, and then to also stream the audio to the living room stereo via the airport express at the same time?
I'm sure someone must've atempted this set up
Any help or info is apreciated!This works. I have a WD Netcenter (320G) which I store my main iTunes library on (holding down the command key when starting iTunes allows you to chose which library you want to use). I'm not using an Airport base (D-Link and now a Zyxel) and I can stream music AND video no problem - all my movies are on there too and they play fine through Front Row.
Oh and I usually mount it as nfs rather then smb - handy little apple script for this which I run as an app (when are Apple going to bring out a proper location manager that automounts networked drives etc based on where you are?!!!).
Have fun.
Charlie
Maybe you are looking for
-
Why do I need to reconnect after sleep with WEP enabled?
I have a MacBook and an old iMac. I enabled WEP and closed network on my Snow Airport but now every time the iMac goes to sleep and wakes up, I have to reenter the WEP key to connect to the Airport. This does not seem to be a problem on the MacBook.
-
4 iPods, 1 computer with Multiple users
I love my iPod but I hate the iTunes software. We have 4 iPods, a PC with WindowsXP and 4 user profiles. If we log on as my son, we can all use our iPods - but if I log on as myself, iTunes doesn't start (ironically, I'm an "administrator", he's a "s
-
Hi My Scenario is from BPM to soap in synchronous mode in PO. BPM is sending request to web service and getting response as attachment in Excel file. for BPM to PI connection ,PI is using sender soap adapter with XI 3.0 message protocol . for webser
-
My external HD increases the kernel_task memory usage.
I use an external firewire hard drive, SmartDisk FireLite, on my eMac. the kernel_task memory usage (RSIZE) goes up to over 400MB, whenever I connect my external hard drive to my computer. normally, the kernel_task uses 100 to 150 MB with all scanner
-
24 bit audio not playing in Quicktime
I have captured some video through an a Matrox MXO2 in Adobe Premiere CS6 and end up with 24 bit PCM audio in my .mov files that can't be played back in Quicktime player or any other Quicktime based application. This happens regardless of the codec