Configurations for CRM 5.0 mobile

Hi All
I am trying to install & configure the CRM 5.0 mobile sales.
I have already installed the necessary components like Mob Repository Server, Comm Station and Mobile Client(on a laptop).
I have done necessary configurations in MRS & Comm. Station.
However I am not able to get any document which talks about the configuration activities required on mobile client. Typically I am unaware of any middleware settings required for initial load, sites, replication objects etc.
Is there any comprehensive guide / note which talks about it for CRM 5.0 mobile?

check the following links
http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
also chk the link on mobiles release notes at the following thread:
Links to CRM Documentation
http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
these links will help..
regards
RH

Similar Messages

System Configuration for CRM Business Package 4.0-60.2 in Portal

Hi All,
We have configured CRM Business Package(4.0-60.2) on EP6 SP11.
Also created the SAP_CRM system with required fields.
But I am confused with where do I have to specify the ISA related parameters?
Should I create new systems with the aliases specified in CRM Business Package Admin guide(i.e.according to Web Entry Point names)For e.g. ISA_B2B,ISA_B2R,SHOP_ADMIN,USER_ADMIN etc. or I have to specify this in SAP_CRM system itself?
Your Help will be appreciated.....
Thanks and regards,
Amol.

Hello James,
Thanks for the prompt reply...
But my question is whether I have to make these changes in SAP_CRM system itself or should i create new system namely ISA_B2B,SHOP_ADMIN,ISA_B2R etc.
With regards,
Amol.
Note : If you have already configured the CRM business package, please send me the documentation or the screen-shots of the system defined in portal on my e-mail id([email protected])

CTS+ configuration for CRM Java stack

Hi gurus,
I want to implement CTS+ configuration for java stack of CRM system.
Please any one help me on this is there specific setting for that.
In the process of configuration it is asking for SDM password.
So I am confused that wh which SDM Password will be supplied SOLMAN or CRM SDM password.
Please help urgently.
Thanks in advance
Dhiraj

Hello Dhiraj,
You might want to have a look at SAp Note 1045501, it states:
> The "Best Practices for Implementing CTS" guide in SAP Developer Network (SDN) explains the architecture and components of CTS. It contains descriptions for possible system landscapes and configuration examples for various application cases. https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
Please follow the link. Then just click on the view how to Guide button. This document talks about the dual stack landscape.
I hope you find it a bit more helpful than the first document.
Regards,
Paul

First Configuration for CRM 5.5

Hi Experts,
Please e-mail me the configuration guide for CRM5.5
i'm doing this for the first time [email protected]
Regards
Ricky

I dont think CRM has a version 5.5.Its latest is 5.0
And regarding the configuration document.U can download it by:
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
thanks,
ashish.

Log configuration for CRM ISA Application.

Hi all,
I have setup the log configurations using the following SAP Note:1017756
But, the following information which is mentioned in the attached file is not clear. Can any one clarify this. what is the meaning of this.
"After making the required settings, note that you still have to start the session log in the Internet
Sales application by setting the request parameter appinfo to true, or by using the u201CSingle Session
Traceu201D link on the start.jsp"
Advance Thanks

Hi
After making the required settings, note that you still have to start the session log in the Internet
Sales application by setting the request parameter appinfo to true, or by using the u201CSingle Session
Traceu201D link on the start.jsp
--> Session log requires to take a trace from the ADMIN XCM, through which you can trace the errors within your web shop application.
The session log can be taken from the link -
http://applicaiton name:port/b2b/admin/index.jsp
Once you login to the above link (the application name and the port is applicable to your project), on the left hand menu, you will find the option for "Session Trace"
--> Also, from the XCM application (such as B2B,B2C etc), (XCM Settings), you need to set Single Session Trace = True.
Hope this will help
Regards

Best Practice documentation for CRM Mobile Sales 5.0

Hi
Is there a configuration guide for CRM Mobile Sales 5.0? I can't seem to find it on SAP's web pages anywhere. If any of you have it, could you please send it to [email protected]?
I see that there has been some posts in the past about some kind of cook book. If this is the right document I'm not sure, but replies to this this post are appreciated
Thanks,
Dag

Hi Dag,
If you have access to the Service Marketplace (http://service.sap.com), select "Release & Upgrade Info" tab, click "Installation & Upgrades Guides" and then open "mySAP Business Suite Applications -> mySAP CRM -> SAP CRM 4.0 -> Mobile Client Installation Guides" section on the left navigator bar.
Please browse the link below(Blogs), here you can find the Mobile sales documents
/people/santosh.v/blog
/people/gregor.wolf3/blog/2005/10/09/setup-product-partner-ranges-ppr-for-mobile-sales-for-handheld-mso-hh
https://websmp102.sap-ag.de/~sapidb/011000358700004374292004E/MCT_Detail.htm
-->Media Library
Thanks,
Suriya.

WAR file and Configuration guide for CRM xMSAHH required

Hello experts,
Please provide us with the Congfiguration guide for CRM xMSAHH(Mobile Sales for Handhelds) 4.0 and CRM xMSAHH(Mobile Sales for Handhelds) 5.0.
We referred to SAP Note 788036,but the link mentioned is not valid.
http:
service.sap.com\instguides -> SAP Components -> SAP Solutions for
Mobile Business -> Mobile Sales for HH (with CRM) ->
MSA for HH 4.0 (with CRM)
Also we need a WAR file(CRM MSAHH) to run the application on Mobile Client MI2.5.
Could anyone provide us with the link or the file for the same and also the CRM backend configuration guide?
Thanks,
Himanshu Limaye

Hi Himanshu Limaye,
Kindly request you to have a look into the NOTE : 871779 , which basically gives all the details needed.
If still any clarification need, please revert the message back , will be ready to help
Regards,
Anand.

What functionality is available with sp 6 for CRM Mobile Client 7 eph1

Hi
Sp 6 has been released for CRM Mobile Client 7 eph1. I know sp 6 provides support for mobile client on windows 8 . Does it contain any other functionality?
Regards
John

Hi John,
All information regarding this release can be found in SAP Note 1799687
Regards,
Gervase

PPR configuration for MSA

Hello Guys:
Do you have any guide which specifies the correct Partner Product Ranges configuration for MSA application, I have been looking into some guides but I have not been able to get a guide or document which explain in detail how this configuration works. I have not been able to download accounts to my HH and I think the PPR configuration must be set correctly to be able to download this configuration.
Hope you can help me out!!
Hugo

Hi,
yes there is a senario configuration guide which clearly explains how to do PPR sttings for BP and products, it has been modified for MSAHH5.0 but is also applicable to MSAHH4.0. please follow the following link.
Http://service.sap.com/instguides -> SAP Components -> SAP Solutions for Mobile Business -> Mobile Sales for Handheld (with CRM) ->MSA HH 5.0 (with CRM 4.0, SP 09)
It will definetely help
Warm regards
Anubhav Bhatia

From R/3 to CRM create one logical system for CRM client 300.

Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

Hi,
Business Systems are te logical system name for a CLient in the SAP.
These can be reused again for different configuration scnario that you must have created for different interface.
All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
Regards
Vijaya

SAP Best Practices for CRM 5.0 is available

Hello,
I would like to announce the availability of SAP Best Practices for CRM 5.0.
SAP Best Practices for CRM allows a fast, safe and predictable implementation of pre-configured CRM business scenarios.
It can be used to accelerate customer implementation projects as well as setting up demo or evaluation systems.
For details about SAP Best Practices in general please see:
<a href="http://www.service.sap.com/bestpractices">http://www.service.sap.com/bestpractices</a>
For the concrete content of Best Practices for CRM 5.0 please see:
<a href="http://help.sap.com/bp_crmv150/CRM_DE/index.htm">http://help.sap.com/bp_crmv150/CRM_DE/index.htm</a>
Best regards,
Joerg

Hi Devendra!
For the Best Practices you can have all the useful installation and informations guides here.
<a href="http://help.sap.com/">Best Practices for SAP</a>
Choose here the Bast Practices tab on the line-menu.
You have to eb careful while installing the BP -> you have to use all the time the right BP release according to your SAP release.
I hope this helps you!
Best regards,
Zsolt

Query on SoD matrix for CRM-Webshop applications - RAR 5.3

Hi,
We are implementing RAR 5.3 for CRM system. We observed that GRC has standard SoD matrix for CRM application. But there is no SOD matrix available for the Webshop (B2B/B2C/BOB) where access will be provided to the external users
We are of the opinion that there will be no SoD conflicts for the Roles/Users created for the webshop applications as the webshops are used by the external users i.e. customers.
Is there any standard SoD matrix available for the authorization objects of the webshop application with SAP? Has anybody configured SoD rules for the webshop application roles? If yes, please provide us the link of the information where we will get this rule matrix
Thanks in advance.
Srihari.K

Hi Sri,
The standard rule for CRM is available in the marketplace.
But I don't think SAP has created standard rule for webshop.
Thanks,
Sudip.
Edited by: Sudip Saha on May 18, 2009 4:05 PM

Portal Content - Business Packages for CRM 7.0 and IC Webclient

Hi all

We are looking at CRM 7.0 and SAP Netweaver Portal 7.0 integration. 
I've noticed that the Business Package (BP) for CRM 7.0 contains very limited business roles for: 
Channel ManagerChannel Manager 
Partner Manager 
Channel Manager (Telecommunications) 
Partner Manager (Telecommunications) 
Customer 
Digital Asset Management 
Incentives and Commissions 
only.

In the past, there the BP for CRM 5.0 contains a lot more roles including customer service representatives and managers. Given that the standard business role export (from CRM 7.0) and import (EP 7.0) does not work for IC Web client business roles, is there a standard way for functionality delivered in IC Webclient like Customer Service to be integrated into EP 7.0?

Otherwise, if we were to configure each BSP page individually for IC Webclient, will there be functions that do not work? eg: alerts, manager realtime view of CSR activities, call tracking, telephony integration etc..

Thanks!

There are two approaches (that I'm aware of):
- install external authentication (such as an LDAP which can be populated from the R/3 backends)
- install an additional Java instance
I would go for both of them because
- it will make things easier if you implement other functionality that is in the portal (non-ESS)
- it will avoid patching one portal and to keep the SPs of both backend systems in sync with the portal
Markus

Inbound Email configuration - SAP CRM with MS Exchange Server

Dear Pundits,
We are implementing SAP CRM and one of the requirement is to configure the Inbound email functionality.
As of now, we have successfully configured the outbound mail functionality.
The inbound email functionality to a Single client:
Our MS Exchange Server Domain is ITAstute.com.
Where as, on the CRM system, under SCOT transaction --> Settings --> Default Domain, we have entered the Domain name as
crm-dev.itastute.com
We are planning to receive emails for different email id's like service, complaints, and so on into our SAP system.
How will the exchange server can direct the mails from above external emails from domail itastute.com to onto CRM server domain crm-dev.itastute.com????
Thank you,
Nikee

Then you need to define the routing rule in the exchange server.
Exchange server config is outside the SAP scope and you should contact your exchange admin to get it done.
Also they might force you to use the port 25 if you have any policy such in your company.
We used the routing rule from exchange to BIGIP and BIGIP to our SAP server, that way we could use different port.
You could search in google for the steps and i come accross the link given below.
See if its useful.
Link: [exchange rule|http://www.petri.co.il/forums/showthread.php?t=13120]
Additional input related to the rule.
you need to define the virtual host if you have more than one client that need to be configured for inbound routing.
*@crm-dev.itastutecom => * applies to any user in your system and crm-dev.itastutecom should be your virtual host.
janus.itastute.com => is your hostname and define port number for each client that need to configured.

Error Message"ERP adapter is called" for CRM sales order replicate to ERP

Hi All:
In our implemenation project, we use CRM7.0 stanard sales order type TA for sales order creation. And we did all the right configuration for sales order at CRM side. CRM sales order can be saved correctly.
But this CRM sales order couldn't be replicate into ERP, as in Middleware the corresponding BDoc message is yellow light and Error messsage show "ERP adapter is called".
Is anyone have same issue before, please kindly advise how to handling this issue and prossibile solution?
Best regards:
Kai

Hi Kai,
Is there any queue entry on transactions : SMQ1/SMQ2 with SYSFAIL status. If so, what is the error message it is showing?
Are you able to process the order further? Or getting an error message like "Document being distributed" or something?
Good luck,
Aaru

Configurations for CRM 5.0 mobile

Similar Messages

Maybe you are looking for