Configure a sharepoint 2013 site for external and internal access

I need to configure a local install of sharepoint 2013 so that users can access it internally and externally using windows/AD authentication. The internal and external addresses are different.
I have bound an external ip to the domain for external access.
I have created Alternate Access mapping, and bound the host header but I get a file not found message for external access.
Have I missed something here? why the error and how can it be fixed. Step by step process would be appreciated.

Hi Luis,
According to your description, my understanding is that the error occurred when accessing the site externally.
The most common cause for this is that the IIS host header is configured incorrectly. The 404 will appear because we are hitting a different IIS web site and not the one we are intended to.
Here is a similar issue for you to take a look:
http://stackoverflow.com/questions/14953322/sharepoint-2013-404-not-found-while-accessing-site-collection-from-outside
More references:
http://technet.microsoft.com/en-us/library/cc261814(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

  • SharePoint 2013 - Site Settings - Users and permissions - "Access Request and invitations" link missing

    I am site collection administrator and have configured the outgoing email in Central administration but "Access Request and invitations" link  is missing, pl advice any additional configurations for this link to show up
    I was though able to configure access requests by going to Site Settings->Users and permission and on the ribbon selected "Access Request Settings"
    What is the difference in either of the approaches?
    Thanks
    Abhishek

    Hi there,
    I noticed this post, and didnt really find an appropriate solution to your issue. I noticed the same issue when dealing with Access Requests. First of all to make sure that the Request feature is enabled, you need to access 
    Site Settings -> Site Permissions -> Access Request Settings -> Make sure the
    'Allow access requests' option is enabled.
    The Allow access screen just allows you to enable the feature and also to specify a email address that notifications are sent to. Whereas the 'Access Requests and Invitations' section provides a screen to manage Access Requests and request history.
    I noticed then that the Access Requests and Invitations link under 'User and Permissions' didnt actually appear until someone actually requests to join the site. It seems that this is needed to display the screen. Once actioned once, the option stays there.
    Hope it helps

  • E-Recruiting for external and internal candidates

    Hello,
    I am looking for documents/guides that can show me how to configure E-Recruiting frontend (for external candidates) to point to the integrated ECC (HR + E-Recruiting) backend, and to configure SAP Portal with ESS (for internal candidates) to point to the integrated ECC backend. I am also looking to configure Trex 7.0 for E-Recruiting.  I am unable to find any documents regarding this scenario. Can anyone help me locate some material?

    Hi Vishal,
    There is no standard field available but this requirement can be handled through an enhancement in the specific BSP page. In your requirement it will be personal details tab in candidate profile wizard and it would also necessiate to enhance infotype HRP5102 - candidate information with this field.
    You can also refer the blog below contributed by Hemendra Singh Manral to understand how to go about doing this enhancement in the BSP.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/other-topics/e-recruitment%20adding%20additional%20custom%20fields%20to%20requisition%20maintenance.pdf
    Hope this information helps.
    Best Regards
    G Raj

  • Dual setup for internet and internal access

    Goal: To set up an Xserve that is both hosting public web sites and internal websites. The server is currently connected to the internet via ethernet 1 and to our internal network via ethernet 2. It serves as a backup failover for our main web server and hosts an internal wiki. The wiki is getting more sensitive company information so we want to cut it off from outside access and guarantee that it cannot be hacked or otherwise seen. Someone mentioned a solution using partitioning of some kind to achieve this separation. I haven't been able to find information on this. Can anyone tell me more about what this may be or suggest a setup that will accomplish the same security.

    Here, you have two NICs within one security context.
    A security breach made via one NIC can generally gain access to another NIC within the context of a single operating system. Once the [security of the box is breached|http://labs.hoffmanlabs.com/node/1214] sufficiently to cause you problems (whether data exposures, deletions, defacement or otherwise), then the entire box is generally considered to be untrustworthy.
    If the breach arrives via http port 80 (and that is a typical web server breach), then (once the breach is made) the box itself is compromised. The firewall block here doesn't get you the degree of isolation provided by a DMZ; a breach via port 80 inward or one of these recent browser-based attacks on the firewall aren't necessarily blocked. (Whether the particular web environment is directly vulnerable to a breach is another and open question. Some environments can be more vulnerable to others, but there's the common assumption that all web-facing and internet-facing environments can potentially be vulnerable. That also ties back to how the box is managed and monitored, and how fast a breach can be detected and isolated and sealed and cleaned up.)
    Some operating systems feature technologies known as sandboxes or jails or such, and sandboxes (and jails) are not AFAIK officially available on Mac OS X Server. These are part-way between the default configuration and what's provided by operating as a VM guest. If you really want to learn the innards of the configuration sufficiently, you might be able to get a jail or sandbox or such going, but then tossing another Mac Mini at the problem solves it in what is usually a more supportable fashion than getting a sandbox or jail going and maintaining the configuration over Mac OS X Server patches and upgrades, and application installations and upgrades, and thus at lower cost.
    The approach using a VM tries to avoid extending the exposure by requiring the attacker to breach the underlying VM to get further from the box, and approaches based on a DMZ and on multiple boxes also try to contain or firewall a compromised system.

  • Specific Settings for external and internal display modes?

    Does anyone know if there is a way do have different settings that adapt to whether I'm using my Macbook's internal display or am docked to my 23" external Cinema Display at home? It would be nice if the Dock would be small and on the side "internally" and large and at the bottom "externally." Also its a pain if I've expanded a window on my external, then disconnect and have to tidy up my windows again so they fit on my smaller internal dispaly

    Hi
    Check this document
    Page 35 shows how to change icons
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8
    Regards
    Krishna.

  • Upload 100 GB data into sharepoint 2013 site

    Hi Team,
    I want to upload 100GB data into sharepoint 2013 site for performance testing.
    I have the 5 document libraries.
    I want to upload the 10GB data to each document library in the site using powershell.
    Is it possible or not? Can you explain the detailed steps

    This should not be a problem, but you can't do it in 1 go as the default upload size per document = 50 MB (see
    https://msdn.microsoft.com/en-us/library/ff487972.aspx). I've created a tool that uploads documents in chunks, maybe you can use that (read the article as you'll need to increase some settings):
    https://gallery.technet.microsoft.com/office/The-Migration-Dragon-for-628acae0 Maybe that's an option for you too.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • How to Enable Anonymous access to a SharePoint 2013 site e.g for specific site,list etc..

    Hi All,
          I'm working on an extranet and i would like users to be able to fill a form on the site.
    Since i'm going to use sharepoint 2013 how can i configure sharepoint to use both anonymous access and windows authentication at the same time.
    I know for sure it can be done but what can be allowed for anonymous access e.g specific list site etc..
    I would need to make some area available as anonymous e.g a whole site as  i would like to brand it a little to host the form.Any tips of who has configured similar would be appreciated

    Hi Patrick,
    Thanks for posting your query, Kindly follow the below mentioned steps to enable Anonymous access to a SharePoint 2013 site.
    In Central Administration, under Application Management., click Manage web applications.
    Select the web application you want to enable anonymous access for.
    In the Security group on the ribbon, click Authentication Providers.
    In the Authentication Providers dialog box, under Zone, click Default.
    On the Edit Authentication page, select the Enable anonymous access check box.
    Click Save.
    Close the Authentication Providers dialog box.
    Also, browse the below mentioned URLs for more details
    http://blog.cloudshare.com/2012/10/15/how-to-enable-anonymous-access-to-a-sharepoint-2013-site/
    http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

    how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
    Thanks & Regards, Krishna

    Hi  Krishna,
    For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <HideCustomAction
    GroupId="Customization"
    HideActionId = "ProjectSettings"
    Location = "Microsoft.SharePoint.SiteSettings">
    </HideCustomAction>
    </Elements>
    Reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
    http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

    SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

    Hi lakshita,
    Would you please check whether you can go to the page:
    http://siteurl/_layouts/settings.aspx page:
    http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
    If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
    Thanks,
    Qiao Wei
    TechNet Community Support

  • SharePoint 2013 Site Mailboxes behind UAG

    Hello,
    I tried to connect to my SharePoint 2013 site mailbox through UAG. From internal access, it works fine.
    From external access, I was connected to the SharePoint Site. I clicked on the Mailbox link I have a OWA form based authentication. After wrote my credential, I had an error page "404 - File or Directory not found". I clicked on back button an
    reauthenticate myself, I received a message "Logon error. Access to the page was made from an unauthorized URL.
    If you were confronted to a same error, how did you corrected this one ?
    Thank you.
    Philippe
    philgood031

    Hi Luo,
    Thank you for your answer. Below replies to yours :
    1. Yes we have activated the form based authentication on UAG. We used based authentication on Outlook Web Access. Connections to Webmail works fine.
    2. We used external URL for Webmail, but for Office Web Apps reasons we have added another internal DNS zone with the same domain name than external domain. We have added Hosts Record.
    3. On local network, we can have access to Site Mailbox in Outlook, I have never tested this from external network. I have added "send as" rights for the user on the shared mailbox and the full rights on the shared mailbox.
    Summary :
    Our client have installed SharePoint 2013, Office Web Apps 2013 and Exchange 2013 SP1. He wants to have an external access to Office documents and also to Site Mailboxes on SharePoint. Office Web Apps works fine inside and outside. Site Mailboxes works fine
    Inside but not outside. They used a domain name like "internal.cotonso.com" and the external domain name is "contoso.com". They called us to resolved this problem. The only Warning informations we received from the Event Viewer with
    sixteen different event id with number 67
    The description for Event ID 67 from source Microsoft Forefront UAG cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the
    local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    2xx.yyy.zzz.156
    charel
    webmail2013
    1
    OWA2013
    ExchangePub2013
    /owa/[email protected]/plt1.ashx?cId=3292ea71-4116-4f59-8957-7e3444de3883&msg=SessionDataError&tg=&MDB=abe00dfc-d231-4a90-aede-4a9b67b68c2e&sdCoId=3292ea71-4116-4f59-8957-7e3444de3883_1397656540883&fe=null&be=null&cbe=null&cver=15.0.847.32&rand=1397656541490&rpo=0&off=0&pal=0&rfe=0&PLT=uES,4,uEE,4,fS,0,dLS,0,dLE,0,cS,0,cE,0,reqS,2,resS,2,resE,5,domL,12,pE,631,now,632&lbv=15.0.847.32&icv=15.0.847.32&iacr=15.0.847.32&lcver=15.0.847.32
    Default rule
    POST
    Thank you.
    Philippe.
    philgood031

  • Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

    We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
    So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
    I found a similar query from March 2014 found here 
    http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281 
    Has there been an update released to resolve this
    Cheers D

    Hi  ,
    According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
    For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • SharePoint 2013 site in 2010 mode - Web Analytics functionality?

    We recently upgraded to SharePoint 2013 from SharePoint 2010.  Our main portal site is running in 2010 mode.  Are "Site Web Analytics reports" supported for 2013 sites running in 2010 mode?  After our upgrade, it appears that no
    new data is showing in these Web Analytics reports, although we can see historic data from before the upgrade.
    I know about the changes in these analytics reports in 2013. Note that I can see the new popularity trends and usage reports in 2013 sites located in the same site collection, but they are NOT running in 2010 mode.  My question is only about
    2013 sites in 2010 mode and the ability to run web analytics reports of any kind to assess page popularity, document popularity, etc.
    Any information would be helpful.  Thank you!

    Hi,
    According to your description, my understanding is that you want to know if the Site Web Analytics reports is supported in SharePoint 2013 sites running in SharePoint 2010 mode.
    The Site Web Analytics reports is supported by Web Analytics Service Application in SharePoint 2010, but Web Analytics is no longer service application in SharePoint 2013 and analyses and reporting process incorporated to search service application. So if
    we view the Site Web Analytics reports in SharePoint 2013 sites running in SharePoint 2010 mode, we will not be able to get the results.
    http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=250
    I recommend to update the sites running in 2010 mode to SharePoint 2013, then you can get the web analytics reports from Popularity Trends and Most Popular Items.
    http://technet.microsoft.com/en-us/library/jj715890.aspx
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • SharePoint 2013 Snippets usage advice and help

          
    SharePoint 2013 Snippets usage advice and help  
    I am new to SharePoint Site development.  I am creating a simple public website to look similar to their old one.
    I have created a masterpage that looks OK using the design manager, and also a page layout. I have got the website looking half OK.
    I seem to have difficulties all the time when it comes to snippets - and finding specific help on how to use each individual one.
    So the main question - where would you advise I go to get help?
    The current snippet issue is:
      > regarding to top navigation menu
      > I have inserted one into the masterpage - and got it working
      > However it will not let me do submenus when I go into Edit Links
      > But I then went to site settings and did the edit links from there
      > It let me there - but it's a different menu !! (I now have two)
      > I can't see this second menu from within the snippets - it defaults to one that does not allow sub menus
      > So how do I change the snippet to look at the menu I was able to edit
    But more generally - when I get this kind of issue, where to I look for the solution?
    Thanks in anticipation

    Hi Mike,
    Go through the links for SharePoint 2013 Snippets. It'll help you in a better way.
    SharePoint 2013 Design Manager snippets
    Indul Hassan
    Microsoft Community Contributor
    http://www.indulhassan.com
    You Snooze.. You Lose !!

  • Adding a Left Navigation in the place of Current navigation in SharePoint 2013 Site.

    Hi All,
    I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
    from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site. 
    But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
    nav like the SharePoint Current Navigation alternative but within my Page Layout.
    Is there an option to chat within these forums?
    Could someone help me to solve this problem?
    Thanks and regards,
    Chiranthaka

    Hi Chiranthaka,
    Thank you for posting in MSDN forum.
    Since
    this forum is to discuss: Visual
    Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    Based on your issue,
    it is more related to the sharepoint, so I’m afraid that
    it is not the correct forum for this issue.
    In addition, I find that you have been posted this issue in this SharePoint forum:
    https://social.msdn.microsoft.com/Forums/en-US/7e3af32b-2bf8-41f5-9420-9265ed64458c/adding-a-left-navigation-in-the-place-of-current-navigation-in-sharepoint-2013-site?forum=sharepointgeneral ,
    so we will merge this case to the above case, I think that the SharePoint expert will follow up your issue.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Sharepoint 2013 site webdav path on office

    Dear All
    I had a problem when open a document word or excel on sharepoint 2013 site,
    when open it and choice save as it will show the path on PC default location not a sharepoint site web path.
    How can I fix it.
    Regards
    PK

    Hi PK,
    According to your description, my understanding is that when you opened a SharePoint document, and chose Save as, it didn't open the SharePoint path.
    Why not use "Save" button to save the document to SharePoint site? I suggest you click "Save" instead of "Save as".
    If this issue still exists, please uncheck “Enable Protected View for files located in potentially unsafe location” in the Trust Center of Office.
    There are two posts, please check if they are useful for you:
    http://blogs.interfacett.com/word-2010-not-saving-back-to-sharepoint-2010-by-default
    http://isharepoint.wordpress.com/2011/05/26/can-not-save-document-back-into-document-library/
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for