Configure DHCP Server in Solaris 10

Hi,
I am trying to configure my Solaris 10 as an DHCP server. I managed get it configured and assigning IP address to my client machines (Windows XPs). However, I can't figure out how to get the "Default Gateway" passed into the Windows XP. Here is what I have done so far:
# /usr/sbin/dhcpconfig -D -r SUNWfiles -p /var/dhcp
# /usr/sbin/dhcpconfig -N 192.168.1.0 -t 192.168.1.1
# pntadm -A 192.168.1.51 -m dns 192.168.1.0
But on the Windows XP clients, I get the right IP address, and netmask, but the default gateway is blank. How do I specify that in my DHCP server so that the default gateway gets sent to the XP clients?
Thanks.

Get the apache server from www.sunfreeware.com and install it on your server.
The url will http://hostname-of-your-server
Go to apache.org to get apache documentation.

Similar Messages

How to configure Proxy server on Solaris 10 - SPARC

Hi All
Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
What tool should be used?

Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using?

Configure DHCP Server options for Internet Sharing?

Good morning, all.
I have a Sprint (Sierra 595U) AirCard internet connection, which I'm sharing over my AirPort (using OS X's built-in Internet Sharing) to several Windows clients in my office. I see that when Sharing is enabled, en1 takes on the address 10.0.2.1 by default, as well as the role of default gateway/router and DHCP server for the Windows clients.
My question is: Can I configure the IP addresses and DHCP options for Internet Sharing to another address/mask scheme?
Just like I changed my home wireless network away from the default 192.168.1.0/24 for security reasons, I'd like to do the same here.
Thanks and Regards,
BrooklynWalker

Some paranoia is good.
Yes, of course security paranoia can be cultured. like yogurt
I googled.
This might help:
http://www.aleph0.com/computing/macosx/dhcp-setup/
but from what I just read, changing away from the default net & mask might be putzy.Some other discussions for you:
http://www.macosxhints.com/article.php?story=20050331194834746
or you might see something here that helps.
Sorry not to be more specific. Hard to tell if you already googled for yourself.
I'll let someone smarter than I am take a look for you, here.

How do you configure DHCP server on OSX Lion Server

I want to use my Mac Mini Server as a DHCP server on my network. I cannot find the place under Server to configure it.
Where would I find it? It is not under Server.

Hi
Download the Server Admin Tools from here:
http://support.apple.com/kb/DL1457
These are not installed when installing Lion and then Server App. Once installed launch Server Admin, click on the Server's name in the side panel, click on Settings > Services and enable the DHCP Service. Once enabled it should appear in the side panel. The rest should be fairly obvious?
HTH?
Tony

Best practice configure DHCP server NAC

hi all,
any idea how the best practice deploy dhcp on cas? i tired follow user guide configure dhcp on cas but still cannot running smoothly user just only grep ip authenticate.
- CCA agent very slow appear when user get ip dhcp on authenticate.any idea ?
- how to integrated profiler with nac appliance .?

Hi ahmed,
You have configured your CAS to be your DHCP server, Thats well and good because you are using Real IP mode, Which Supports the CAS to be a DHCP server.
Remember
This Setting is only For your Authentication VLAN that your client gets an ip While Authentication ok.
When your Client switches to Access VLAN , your client trafiic no longer flows through the CAS so CAS is now not responsible for DHCP.
You'll have to configure another DHCP on the Trusted Side which can Lease IPs to the Acess VLAN Members.
As you have configured OOB then your client is in Acess VLAN and does not come in contact with the CAS so you need the Trusted side DHCP to give the Client an IP address.
Here in your Scenario your ACCESS VLANS are 2022,2044
Hope this helps, Do reply after Testing.
Thank You
Regards
Edward

Configure Web Server in Solaris 10

Hi
I am using Solaris 10 I want to use it as web server How can I configure
it what is the procedure to provide name of Web server and Total configuration through I can access on LAN or WAN
Regards
Satish

Get the apache server from www.sunfreeware.com and install it on your server.
The url will http://hostname-of-your-server
Go to apache.org to get apache documentation.

Windows 2003 DHCP server merge to Solaris 10

Does anyone ever tried to merge a Windows2003 DHCP server to Solaris 10? Especially running this DHCP server in a solaris zone?
I have an old windows 2003 server with 100 DHCP clients that needs be be transported to Solaris so we can get rid of this Windows machine.
Is it possible to read the DHCP backupfile from windows2003 with Solaris?

Troy H wrote:
> Hi,
>
> I have an issue where I do not see SLP being deployed successfully from
> a Windows Server's DHCP scope options. All of the other options come
> through.
>
> I followed this MS doc: http://support.microsoft.com/kb/285019
>
> As far as I can tell, it's setup correctly.
> Has anyone else setup SLP Options in MS and gotten them to work?
> Thank you,
> Troy
Okay, more information:
Workstations that are imaged will receive SLP information as long as the
Zen agent hasn't been installed.(using latest Zen7SP1 Postpatch)
Once you install the Zen agent you will no longer receive SLP via DHCP.
Note that the Novell Client version can be 491 to 491 SP3.
However, if you rename the C:\windows\system32\novell\novdhcp.dll file,
you'll resume getting SLP info from DHCP.(TID 10093676)
Pretty strange, eh?

Configure DHCP for Airport Extreme to see PPoE on a Nyxel DSL Modem?

I would like to configure DHCP server for an Airport Extreme to see PPoE on a Nyxel DSL Modem?

Please perform factory default reset on the AEBS as follows:
Pull the power plug from the back of the AEBS
Hold in the reset button and keep holding it in for an additional 8-10 seconds while you plug the power back in to the AEBS
Release the reset button and allow 25-30 seconds for the AEBS to restart to a slow, blinking amber light
Connect an Ethernet cable from the Zyxel modem/router to the WAN port (circle icon) on the AEBS
Connect another spare Ethernet cable from your Mac to one of the LAN <=> ports on the AEBS
Open AirPort Utility, select the AEBS, and click Continue to follow the guided setup as follows:
Page 1 - Assign a device name and device password for the AEBS
Page 2- Select "Create a wireless network"
Page 3- Assign a name for the wireless network and a password for the wireless
Page 4 - Select Bridge Mode if not already selected
Page 5 - Setting should be Configure iPv4 Using DHCP. Not other info is needed
Page 6 - Summary of settings and click Update
Close AirPort Utility
Test out the wireless by disconnecting the spare Ethernet cable and then clicking the AirPort icon at the top of your Macs screen to Turn AirPort On.
Then click Join Other Network and Show Networks to locate your wireless network and log on using the wireless password
You should be good to go

RV320 DHCP server

Serial Number:
Firmware Version:
v1.1.1.06 (2013-12-06, 11:02:37)
PID VID:
RV320 V01
Dear sir,
I got a issues, I have configure 2 VLAN on RV-320, VLAN 1 i have disable the DHCP, VLAN 25 i have configure DHCP Server enabled, but it seem DHCP bind on VLAN 25 is not working, then i try to config the static IP on device testing the VLAN is working, successful separate broadcast domain. and i can pint the VLAN 25 IP address, on DHCP i have re-enable VLAN 1 DHCP Server, it also working, successful assign the ip address to dynamic host.
any advise on my issues?
Thanks,

echolai@califor,
i had vlan disabled and vlan untagged for my RV320 in the lab, which would not hand out ip address for a different vlan. At this point at your earliest convenience open a support case so an engineer can look at the configuration in your router. If you like i can take a look at your config. Just send config to PM.

Solaris 10 x86 & DHCP server

Hello
I am trying to create a jumpstart server to install some IBM HS20
blades (usb cdrom is not supported for the installation as I know), so
I installed Solaris 10 x86 in a vmware virtual machine and I am trying
to create the jumpstart server, starting by the DHCP server ! this is
the problem !
My configuration is really simple, I followed the SUN instructions to
create the DHCP configuration...
Any help will be appreciated , thanks in advance
Here is the output of the dhcp daemon debug mode
bash-3.00# /usr/lib/inet/in.dhcpd -d -v
4219f200: Daemon Version: 3.5
4219f200: Maximum relay hops: 4
4219f200: Run mode is: DHCP Server Mode.
4219f200: Datastore resource: SUNWfiles
4219f200: Location: /var/dhcp
4219f200: DHCP offer TTL: 10
4219f200: ICMP validation timeout: 1000 milliseconds, Attempts: 1.
4219f200: Maximum concurrent clients: 1024
4219f200: Maximum threads: 256
4219f200: Read 3 entries from DHCP macro database on Mon Feb 21
15:36:48 2005
4219f200: Monitor (0003/pcn0) started...
4219f200: Thread Id: 0003 - Monitoring Interface: pcn0 *****
4219f200: MTU: 1500 Type: SOCKET
4219f200: Broadcast: 172.30.255.255
4219f200: Netmask: 255.255.0.0
4219f200: Address: 172.30.150.117
4219f20a: Datagram received on network device: pcn0(limited
broadcast)
4219f20a: Reserved offer: 172.30.110.9
4219f20b: Sending datagram to broadcast address.
4219f20b: Updated offer: 172.30.110.9
4219f20c: Datagram received on network device: pcn0(limited
broadcast)
4219f210: Datagram received on network device: pcn0(limited
broadcast)
4219f218: Datagram received on network device: pcn0(limited
broadcast)
4219f220: Sending datagram to broadcast address.
4219f220: Updated offer: 172.30.110.9
4219f220: 0004: Refreshed (0x8088870) to (0x8089880)
4219f234: Sending datagram to broadcast address.
4219f234: Updated offer: 172.30.110.9
^C4219f24e: Signal: INT received...Exiting
4219f24e: Freeing offer: 172.30.110.9
4219f24e: Closing interface: pcn0
4219f24e: Monitor (0003/pcn0): exiting.
4219f24e: Interface statistics for: pcn0 **************
4219f24e: Pending DHCP offers: 0
4219f24e: Total Packets Transmitted: 3
4219f24e: Total Packets Received: 4
4219f24e: Total Packet Duplicates: 1
4219f24e: Total Packets Dropped: 0
4219f24e: Total Packets Processed: 3
4219f24e: Total Protocol Errors: 0
4219f24e: Daemon terminated.

what's your DHCP server configuration?
type dhtadm -P and that will print the configuration of the dhcp table and all your macros.
On another note, I also have a blade server (3Up CMU-4) that has USB keyboard and mouse, even if the interface is PS/2 (converted internally to USB). Solaris will not recognize the keyboard and mouse when installing or booting, but after the kernel is loaded I can use them OK. I do get the keyboard profile error and I think it is related to the fact that there is no PS/2 k/m enabled. The only way that I found that I could use the mouse in the graphical interface was to use a USB keyboard with a hub and connect a USB mouse to the keyboard, Anybody has any explanation for this behavior?
Max

Internet connection failed to configure DHCP ipv6 on Small business server 2008

1. disabled ipv6 on nic and RESTARTED SERVER....
2. realizing i did a mistake, i renabled ipv6 on nic after that
3. now fix my network gives error report DHCP not configured properly for IPV6
4. ipv4 has fixed ip address (192.168.43.9), router ip 192.168.43.254, i chose dynamic ip assignment for ipv6 (not sure should be static or dynamic).
5. Fixed my network assigned fixed ip address automatically but failed to fix error DHCP for ipv6 for the network.
6. i also tried internet connection wizard, which fails reporting error Internet connection wizard cannot configure dhcp for ipv6 sbs 2008. this
error is received after click NEXT button on successfully server and router ip on Detecting Router and configuration page.
Although I am not using IPV6 but server may be using it. Can someone please please help me.
thanks

Hi,
I can find that there is a
same thread that you posted in the forum. I had replied it. Please check if can help you. Just remind that please reboot when uncheck IPv6 option and monitor the result. Meanwhile, please check if can find some relevant issue when you run
SBS 2008 BPA.
In addition, please refer to the following thread and skip the DHCP check, then run the wizard. Please check
if this wizard can be ran completely. If run successfully, then enable the DHCP
again.
SBS
2011 is detecting DHCP on my network after I disable it and i cant continue setup
Hope this helps.
Best regards,
Justin Gu

Solaris 10 x86 PXE and jumpstart using Linux DHCP server !!

Hi,
I am trying to get a my Solaris 10x86 jumpstart rolling.
I have created the images for the OS, but the only issue I have ahead is using a Linux box as a DHCP server for my X86 box to get the image.
Is it possible to have a linux host that serves as a dhcp server to jumstart X86 host with Sol 10 x86
or do I need to have a solaris host that runs DHCP service on it.
Any advice on this issue.
Thanks.

Well, if you don't think the online Documentation helpful, then the better way is reading step-by-step instructions from a book. Get to local bookstore, i.e Barne&Nobles or Border or any big local bookstore, there should be pretty good book for Unix Administrator (Solaris version).
If you have time and think you can memorize then, read on the spot; otherwise, buy the book for future reference.
If that's not what you had in mind, then this link of free online book might help : http://www.oreilly.com/catalog/solaris8/chapter/ch04.html
Normally, oreilly online bookstore offers free books to accredited universities, colleges, and organizations. However, if that option isn't for you, it might even offer free sample chapters that might just suit your needs.
hoep it helps.
-van.

Solaris 10 SPARC DHCP Server causing disconnects every hour

I am using Solaris 10 SPARC (Netra X1) as a router (DHCP/NAT)
I'm running the built-in dhcp-server with the following in /etc/inet/dhcpsvc.conf
DAEMON_ENABLED=TRUE
RESOURCE=SUNWfiles
RUN_MODE=server
PATH=/var/dhcp
CONVER=1
HOSTS_RESOURCE=files
ICMP_VERIFY=false
INTERFACES=dmfe1
LOGGING_FACILITY=1
VERBOSE=TRUEI have made an entry for my MAC address
# pntadm -P 192.168.1.0 | grep 192.168.1.218
010026B9B29555 00 192.168.1.218 <MY IP> Zero UNKNOWNHowever, if I rely on DHCP I get disconnected for a few seconds every hour exactly. All my SSH connections drop and I get disconnected from any IRC server I am on.
If I set my client to a static IP this issue disappears, which leads me to believe it's DHCP who is the culprit here.
Does anyone have any suggestions? From the pntadm output "Zero" should mean the lease never expires, right?
Thanks

A 64 bit VM is not necessarily faster than a 32 bit one. I remember at least on suggestion that it could be slower.
Make sure you use the -server option.
As a guess IBM isn't necessarily a slouch when it comes to Java. It might simply be that their VM was faster. Could have used a different dom library as well.
Could be an environment problem of course.
Profiling the application and the machine as well might provide information.

How to configure tape to sun solaris server?

Hi
We have a tape "Quantum Super DLT 600 tape drive" connected to Sun solaris 9 and working properly.
Now we want to connect and configure it to Sun solaris 10 server. I want to know how we can do it?
I checked in st.conf file , "#tape-config-list=" is commented in both solaris 9 while in solaris 10 it is not there.
I think i will just have to connect the tape to new srver(solaris 10) and do a reconfiguration boot. Right??
Also, what do i need to do for connecting the tape back to solaris 9 server.
Thanks

You really don't need to reboot the server. Connect the tape to the server and type devfsadm -Cv. Then type dmesg and check whether Solaris detect the tape or not.
if not do a reboot and see.
after doing one of above, insert a tape to the tape drive and type "mt stat" and see you got any output about a tape.
Refer Solaris 9 and Solaris 10 System Administration Guides.
Edited by: Thusith.M on Jul 31, 2009 9:24 AM

Do I have to disable DHCP in router and configure DHCP role in essential server to make connection with internet

hi,
'do I have to enable DHCP role on essential server just like sbs server to configure internet and domain name , or that is not really necessary , the router dhcp is enough toconfigure essential server!
thanks
johan
h.david

The router DHCP is enough to use Essentials server. Essentials is designed to work with router dhcp out of the box, but you can choose to install DHCP role on server if you like. If you decide to do that, check the blog post from
here: http://blogs.technet.com/b/sbs/archive/2013/04/22/running-dhcp-server-on-windows-server-2012-essentials.aspx
Also check the Essentials documentation for more details from here:
http://technet.microsoft.com/en-us/library/cc514417.aspx

Configure DHCP Server in Solaris 10

Similar Messages

Maybe you are looking for