Configure Email Alerts in SCOM

Hi
I have configured Email notifications, Subscribers and Subscriptions using SCOM console. Now I just want to receive only those alerts on email-id which keeps open for atleast 24hrs.
E.g.-
Alert- A Domain Controller has failed the AD Op Master Response test Resolution state: New
Frequency- If open for Over 24 hours, then alert should be generated.
Any help would be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization

You can configure delay in channel wizard, step (Channels) add the command channel we created in step 1 and specify the desired delay (1440 minutes in this case). As shown below:
Click “Next”, in the summary step make sure “Enable this notification subscription” is checked and click “Finish”.
You should now have an subscription ready for new SCOM alerts.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Similar Messages

How to configure email Alerts in OEM Cloud 12c for Database Servers up/down

Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel Vega

Hi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat

Need to configure email alerts for app/web server shutdown

Hi,
I need to configure email alert notification, so that whenever application server or webserver is shutdown/restarted, an email is sent to the group/userid.
I am aware that in Peoplesoft, there is no parameter or functionality which sends an email notification whenever application server & web server restart & shutdown. This is where I need help.
Did anyone setup the email alert notification in any of your environments? If so, please let me know how did you do the setup?
Thanks,
Sakky

Please find the below sample batch program.
this helps to start the appserver automatically and if the status fails this will send email automatically.
This is the another way of findting the status of the app server.
In the below program, by finding the "Done" value on the output screen we can decide if the server is running or not.
Hope you understand this, Kindly let me know if you need further information.
===============================
@echo off
REM Set a temporary variable
SET CONNECT
REM Check the status of the Application server
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
REM If the server is down boot the server
ERRORLEVEL 1 SET CONNECT= psadmin -c boot -d PSEPM
%CONNECT%
REM Check the server again for status
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
IF ERRORLEVEL 1 goto sendmail
goto end
REM Sending mail to Administrator
:sendmail
REM setting the path for email command
SET CONNECT= cd D:\PT849\bin\client\winx86
%CONNECT%
REM Below command will send mail to the Administrator
SET CONNECT= psemail -server < server ip> -from [email protected] -to [email protected] -subject "Server Down" -body "Hi, Server is down at this time, unable to boot."
%CONNECT%
:end
==============================
Edited by: Soundappan on Feb 19, 2011 10:39 AM
Edited by: Soundappan on Feb 19, 2011 10:40 AM

Configuring email alerts in Ops Center

Hi all,
I have been struggling quite a while to get email alerts working from Ops Center with no success in 11g nor 12c. In the Ops Center GUI, Administration -> EC -> Local Users -> configured user to receive all alerts and emails. I have also configured email relay host correctly(checked a million times).
Sending emails from the host through the email relay works fine, so I'm baffled.
#mailx -s " Test from Ops Center" "my.email@work" < text-file
Do I need to configure something else in Ops Center or what am I missing here?

The email alerts from Ops Center are working for me, I performed...
1.) You must be able to send email from the command line on the Enterprise Controller to the intended email address, ie;
# mailx -v [email protected]
Subject: Email test from Enterprise Controller
EOT
<control-d>
That test must be successful, and the email received!
2.) Setup the Notification Profile in the BUI...
Administration > Enterprise Controller > Users
Highlight the root user, select Configure Notification Profile (the wrench icon)
Notifications via >> Subscribe to All Notifications
User Interface > "Problem updates and all Severities"
Email: > "Problem updates and all Severities"
Pager: None
Notifications Delivery Details
Email: [email protected]
Pager Address: <blank>
Mail Host: localhost
Port: <blank>
Mail User: root
Mail Password: <enter the password for root on the EC>
Connection Security: STARTTLS
Select: Update Notification Profile
3.) Go to Assets > Operating System (second level down) of some Asset
In the center pane select the "Monitoring" tab
Under "Threshold Monitoring Rules" highlight "Memory Usage Percentage"
Edit Alert Monitoring Rule Parameters (the pencil)
Monitor for alert limits continuously
Toggle: Generate Alert after 1 Minute
Change Critical MemoryUsage.usedMemoryPercentage > 2%
Change Warning MemoryUsage.usedMemoryPercentage > 1%
Apply
Wait one minute, you should receive an email that resembles the following:
Notification is generated by (90037): myserver
ORACLE Enterprise Manager 11g Ops Center Reported Problem
GlobalZone: myserver
Problem ID: 425Detection Date: 02/24/2011 05:23:36 GMTSeverity:CriticalState:UnassignedOwner:-Assigned Date: -Problem Description:Memory Usage Percentage has reached 59.4122 on myserverOps Center Server: myserverProblem Link: Click on to be redirected to the reported problem
https://myserverx:9443/emoc/?objectName=com.xxx.hss.domain%3Aname%3DNORM-myserver-XVM_SATELLITE%2Ctype%3DOperatingSystem&treeId=asset-tree&handler=alarms&alarmId=425Suggested Actions NumberSynopsisAssociated Operational Plan-None

How to configure email alerts on SBS 2011

It was kind of annoying, but SBS 2003 could send email alerts for all kinds of conditions. The alert function is no longer there in SBS 2011. Is there any way to configure these alerts - like when the server restarts - or the Exchange Store has
shut down, etc.
Thanks!

Dear Mike,
I am 12 months on from replacing SBS 2003 with SBS 2011 at one site, SBS 2012 at another and SBS 2008 at a third. Its just me and around 250 users in about 7 countries and 3 continents - such is the charity sector. I have not had the time to
research automatic alerts up till now and missed a failing backup as a result. Your article is very helpful. I hadn't put my email address in the box that you indicated. Its been a great puzzle to me that the level of reporting was so abysmal
after the change to the later generation of SBS, but the pressure of work never allowed time to check. False economy I would say, now, but thanks for this very clear and helpful item.

Configure email alerts on SMD7.0

I have attended the trainng "Guided Procedure for SMD". It mentioned confguring email alerts on SMD
but did not give any detail.
I have looked into SM7.1 document which gives details about email alerts configuration.
However we have no SM7.1 yet.
Could some experts help gives some blogs or links for SM7.0 here?
Thanks!

Hello,
The e-mail alerts can be configured using BC-CCM-MON infra-structure (RZ20) and the SV-SMG-MON-BPM to monitor business processes. The BC-CCM-MON supports Java monitoring, but not all of it.
Alternatively, you can purchase the full version of Wily EM and configure e-mail alerts on it.
Best regards,
Guilherme

Configure email alert

Hi all.
I want to configure UCS Manager to send an email to me in case of having error (critical/major/minor)
I read configuration guide, and it says that I must have a CCO ID to register smart call home.
I don't want to register SCH, I just want UCSM to send me an alert email.
How do I configure ucsm
Thank.

Hello,
Yes, you can configure Call home in UCSM to send email alerts.
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101100.html
Smart Call home is the feature name when you want register the device with Cisco.
HTH
Padma

Prime infra 2.1: How to configure email alert supression time (30 min)

Hi Experts,
I am not sure if it is possible or not, but my client is investigating an on going issue where we are tracking the interface down alerts on a switch.
We have configured the mail server setting & getting the mails also for the interface down alerts but there is a note in the mail which says mail notifications will be suppressed for next 30 mins for subsequent alerts of this interface; is their any way to configure/remove the this suppression time as my client is wants the e-mail each time this interfaces flaps up/down.
Any help will be appreciated
Thanks
Rakeem

Hi,
once an e-mail alert has been received for an interface the e-mail alerts for the subsequent alerts for the same interface will suppressed for next 30 mins.
Unfortunately, this e-mail suppression time is not configurable & filed as an Enhancement Request (BUG | Severity 6): CSCuq54773.
Enhancement Request (BUG | Severity 6): CSCuq54773
Symptom:
Certain repetitive alerts would report that "E-mail will be suppressed up to 30 minutes for these alarms". Many deployments want this time value to be configurable.
Conditions:
PI - 2.0, 2.1
When e-mails notifications are sent out
Workaround:
None at the moment
https://tools.cisco.com/bugsearch/bug/CSCuq54773/?referring_site=bugqvinvisibleredir
- Ashok
Please rate the useful post or mark as correct answer as it will help others looking for similar information

Is there a way to configure Email Alerts for expiring Keys of app registered Keys?

is there any current alert key expiry feature for apps registered in AD to talk to Key Vault?

Prajakta,
Are you asking about the key (credential) used by the application to authenticate to Azure AD? I'm not aware of an Azure AD feature to alert on expiry of this credential, but let me move this conversation to the Azure AD forum so that my Azure AD colleagues
can chime in.
Sumedh

Email Alert for Specific Server Groups

We are using SCOM 2012 R2. We have windows server 2003 and 2012 servers.
I configured email alerts for this servers.
Criteria:
Notfiy on alerts
of a critical severity.
and of a high priority
and with New(0) resolution state.
I succesfully recieve alerts and emails from this configuration.
But i want to recieve email alerts from specific Windows Server 2003 servers or Windows Server 2012 servers.
I create a server 2003 and server 2008 group in scom.
I use "raised by any instance in a specific group" OR "raised by any instance of a specific class". I shutdown one of the servers. I can see alerts in scom active alerts section (hearthbeat alerts) but i cannot recieve emails about
this alerts.
If i use monitor rule (for example printer spool service rule) , I can recieve emails but it does not for work hearthbeats alerts.
I recently install Windows Server MP and Active Directory MP .

Create a group containing watchers/watcher groups for your servers and use this group in subscription filter. See this
post for more info.
Gleb.

Team Foundation Server 2013 Email Alerts not working.

Hello
I'm trying to configure Email alerts for my TFS but whenever I do a "Send test email" I get the following error.
This is what the log file in the error says.
[Info @05:07:35.833] ====================================================================
[Info @05:07:35.833] Team Foundation Server Administration Log
[Info @05:07:35.833] Version : 12.0.30324.0
[Info @05:07:35.833] DateTime : 01/27/2015 10:07:35
[Info @05:07:35.833] Type : Configuration
[Info @05:07:35.833] Activity : Settings
[Info @05:07:35.833] Area : ApplicationTier
[Info @05:07:35.833] User : WIN-NOBGFM4GTAF\Administrator
[Info @05:07:35.833] Machine : WIN-NOBGFM4GTAF
[Info @05:07:35.833] System : Microsoft Windows NT 6.1.7601 Service Pack 1 (AMD64)
[Info @05:07:35.833] ====================================================================
[Error @05:09:20.580]
Exception Message: The operation has timed out (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.TeamFoundation.Admin.Console.Models.DlgSendTestMailViewModel.SendEmail()
I've tried searching around and have found one or two other people with the same problem but haven't found a working answer.
Nauman Abbas ICS Network Engineer

TFS forum is here: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Prime Infrastructure 2.0 email alerts with hostname?

I have configured email alerts however in the message it shows up with the IP address instead of hostname.
Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)?
Thanks,
Chris

I see now, this is a poor carry over from NCS. The option that says include "controller" in email does provide the switch hostname. Hopefully by version 3.0 they will have all the wireless naming fixed when it applies to converged.
Thanks Rob!

Can not use Cisco VMS 2.3 to send email alert to admin

Hi all,
I am using IDSM version 5 + Catalyst 6513.
I am going to configure for Cisco VMS 2.3 to send alert email to admin. I downloaded scritp from cisco forum but now I can't configure.
1. I rename the file emailalertv5.txt to emailalertv5.pl
2. I copy the file to directory "E:\CSCOpx\MDC\etc\ids\scripts\"
3. I configure in Cisco VMS 2.3 (like the attachment)
However, I can't receive the alert email from Cisco VMS 2.3. When I connect to Security Monitor, I see many attack events.

Hi all,
if you know the answer, please answer me. I am looking for your answer.
I read all materials about IDSM-2 but I can't configure email alert.
Thank you very much.

CCMS EMAIL ALERTS

HI,
Is there any way that i can setup such that emails are sent only when the next alert comes in.( i dont want to send the emails for the same alert continuously ).
Thanks in advance

Hi,
1. Configur SMTP
2. Configure Email alerts in RZ20
3. Then try it now
Check with http://help.sap.com --> Search CCMS Email Alerts.
Regards,
Srini Nookala

Email alert for update failure

HI,
I want to configure email alerts when an update fails for only a few transactions

To monitoring the failed updates in SM13 you should go to
RZ20 ->
SAP CCMS Technical Expert Monitors ->
All Contexts on Local Application Server ->
Update
UpdateServices
Old Update Record
Select this MTE and click in Proprerties.
In the performance Attribute have the thresholds that will be compared with the last 24 hours, the the number of the update is around the threshoulds, the new alert will be created.
To get an email you should check the note #176492 and ensure than all steps are right in the configuration.
TO check if the email configuration is right you can trigger an auto-reaction method manualy.
Goto the monitor (in RZ20), Extras - >Active mantainance function
Select the item and go to Edit -> Nodes -> Start Methods -> Start AutoReaction
And check if the emails are display in SCOT or SOST transaction.
Cheers Clebio

Configure Email Alerts in SCOM

Similar Messages

Maybe you are looking for