Configure MacMiniServer 2,53 GHz MAC OSX Server 10.6 via Windows 7 PC

Hi,
i have a problem. I bought the MacMiniServer 2,53 GHz MAC OSX Server 10.6 and I want to configure the MacMiniServer via a Windows 7 PC. But the Mac Mini Mac OS x Server Install DVD can not open with a Windows 7 PC. Is there a possibility to start the install DVD from a windows 7 PC. I have at this time only a Windows PC.
Thanks for your help.

Hi
The MacMini Server having no optical drive has nothing to do with what you want to do. The server OS comes pre-installed.
All you have to do is follow Mr Hoffman's suggestions.
Any USB Keyboard and mouse will do. Your only problem as far as I can see is finding a suitable monitor and/or DVI adapter to connect it to. It may be worth your while purchasing a Mini Display Port to VGA adapter?
Tony

Similar Messages

Installing Mac OSX Server hangs at Network Configuration

Hi there!
I am installing my new Mac OSX Server (SNow Leopard) straight forward the assistant.
Asking for Language: OK
Asking for Country: OK
Keyboard Layout: OK
Entering License: OK
Configuring Network:
Ethernet: Static
Airport: OFF
FireWire: OFF
Clicking on Forward to continue: The assistant keeps telling me "configuring network". Nothing happens. It is doing that for hours now.
I tried to connect with Server Admin tool: OK works.
The network is up and running, but the assistant is not continuing.
Any ideas?
Thanks for any help or suggestion

Smells vaguely of a DNS error or IP routing or a network connectivity problem.
What did you specify for your network settings, and particularly what was entered for the DNS server address? If you're not running DNS on your local network here, then enter no DNS servers as part of the prompting, and let Mac OS X Server establish its own default single-host DNS.
(You're not going to be able to use your ISP DNS here; those ISP DNS servers are not valid when you are establishing a server on a network behind a NAT gateway.)
I'd probably wipe the disk and boot from DVD and reload.

Mac OSX Server error message in console

Hi,
I have the following error message having recently bought and configured (for the first time) a MacMini Server with Mac OSX Server 10.6.n.
1/26/11 1:38:11 PM org.dovecot.dovecotd[8582] Fatal: Invalid configuration in /private/etc/dovecot/dovecot.conf
Can someone help me understand how to fix this problem?
I can see the file in terminal, but don't know how to edit the file or change the file configuration to be correct.
Thanks,
Don

Don,
Welcome to the Discussions.
You may find a better audience for you question over in the server-specfic discussions.
http://discussions.apple.com/category.jspa?categoryID=96
Matt

Mac OSX server not supported behind Airport Extreme NAT router?!!

For a customer, I recently installed a new XServe, within a local network with an Airport Extreme (n) with FW 7.4.2. Mac OSX Server manages the router (which has a fixed IP from the ISP). Because the Mac OSX Server runs a DNS server (supporting a local domain), OSX Server reconfigured the Airport Extreme, so that it would forward DNS queries to the server. The server's dns server will forward queries for non-local domains to the ISP's dns servers.
All clients get their IP configuration using DHCP from the router. You can't use the DHCP service of the server, as you can't disable DHCP on the router (in NAT mode).
All clients get the router's IP as the dns server.
HOWEVER:
The Airport Extreme can't connect to the internal DNS server! *It doesn't seem to be able to route dns requests to the internal network* (verified using nslookup). Any dns queries sent to the router will time out.
Come on, Airport Extreme team.. you can't claim the Airport Extreme to be the ideal router in combination with an OSX server, if this simple and very common setup is not supported! How hard can it be to either:
...*Allow us to disable DHCP on the router* (even when in NAT mode), so we can use the OSX server for this (which will dispatch the correct DNS settings)
...*Allow the router to route DNS queries to the local DNS* (OSX) server (which should be working anyway)
Message was edited by: blackbit

blackbit, Welcome to the discussion area!
It doesn't seem to be able to route dns requests to the internal network (verified using nslookup).
That is true.
This is a user to user discussion area so Apple will not see your suggestions here. Instead go to www.apple.com/feedback/airportextreme.html and send them to Apple.

Not installing Mac OSX Server 10.5.4

Hello Friends...
I purchased Mac OSX Server 10.5.4 Leopard DVD.
I would like to install and configure it.
According to the manual , its not working.
It is getting upgrade to my Mac mini 10.5.7.
After installing , it wants to restart. But, its not booting and getting always restarted.
So, any advices and suggestions from your side.
Regards,
Bhanu

I'm going to point you to these two places to see if you can resolve your issues:
http://discussions.apple.com/thread.jspa?threadID=2019706&tstart=300
http://support.apple.com/kb/HT3479
Basically what happens is if you insert the Server install DVD and start the installer package, if the DVD will boot your Mini it will show the 'Restart' button. If it can't, the installer will run and then you should follow the instructions in the second link.
Given the fact that many have tried and failed with the second method, I would attach the Mini, in target disk mode, to another Intel-based machine and run the install from there with the Mini as the target. Then boot the other machine from the Mini's disk and let the Setup Assistant finish -don't configure any services on the server in this mode other than setting it up as standard or advanced, apply any updates and then restart. Then shutdown both machines, detach the Mini, then let it boot on its own and continue configuration from there. I've done this several times with both PPC and Intel-based machines with positive results.

Clean urls in drupal on Mac Osx server 10.5

How do I configure "Clean URLs" in drupal on mac osx server 10.5. ?
How do I get it to work???
HElp Please
Message was edited by: Marianna.83

You need to make sure that the group you are enabling the services for is in the LDAP path for the 10.5 server, and not in the local directory or the LDAP for the 10.4 server.

Adding Bootp/DHCP Options to Mac OSX Server 10.4

Our telephone supplier - Splicecom (http://www.splicecom.com/) - has asked us to ensure that option 66 and option 67 are enabled in order for their PCS400 handset to pick up an IP address from our Mac OSX Server DHCP server.
Please can somebody advise on how to either:-
a) ensure that they are already enabled
or
b) tell me how to enable them
Many thanks
Paul

I think you need some other DHCP server to acheive what you need
option #66 = Boot Server Host Name
option #67 = BootFile Name
(Try "man bootpd" in Terminal.)
The ISC DHCP server can be installed in OS X using PortAuthority / DarwinPorts:
"dhcp 3.0.3, Revision 1, net/dhcp (Variants: darwin_8)
http://www.isc.org/products/DHCP/
ISC's Dynamic Host Configuration Protocol Distribution reference implementation of all aspects of the DHCP protocol, through a suite of DHCP tools: A DHCP server, client, and relay agent. These tools all use a modular API which is designed to be sufficently general that can easily be made to work on POSIX- compliant operating systems and also non-POSIX systems like Windows NT and MacOS. The DHCP server, client and relay agent are provided both as reference implementations of the protocol and as working, fully-features sample implementations. Both the client and the server provide functionality that, while not strictly required by the protocol, is very useful in practice. The DHCP server also makes allowance for non-compliant clients which one might still like to support.
Platforms: darwin
Maintainers: [email protected]"
But you'll need to configure this DHCP using a texteditor.

Is a mac osx server fits to a office with 10 PCs

I want to set up a server for my company
The purpose of the server is to store files, share files & printer, a calendar, an internal website( for hosting a blog and filemaker files), regular backup
My office will have 10 PCs (window 7) connects to the server, and my company dont have an IT expertise ..
I have considered between Window SBS, Mac osx server and ubuntus server
I think a mac mini server is the best solution for me as:
1: easy installation
2: less expensive than SBS
however, is the mac mini server work well in my case?
Thank you very much!

An Apple Mac Mini server would be a good fit. It includes two 500GB drives and an unlimited-user copy of Mac OS X Server. Not bad for $999.
Mac OS X Server itself is very easy to configure and Apple has a lot of resources on their website to help guide you.
You will want to make sure to configure all of your file sharing share points with SMB for the Windows clients to access. You won't be able to take full advantage of Mac OS X Server's offerings, but for file sharing it will be fine.

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

Bridge CS6 Mac cannot browse Mac OSX server 10.8

Hello:
We had a drobo file server which was mounted on the desktop and had no issues browseing the volume in bridge. After we moved to a new Mac OSX server running 10.8 we can no longer browse the mounted server. We get a primission violation. Using the finder we're able to browse files and folders and create new files without this same type of issue.
Is there a preference that allows connection to a network volume via Bridge?
I hope I was clear on the discritpion of the problem.
Thanks,
Rick

Try a reset of preferences for Bridge using option key while restarting Bridge and choose reset prefs.
There is also a plist file for Bridge in the user library preferences folder that can be manual deleted and will be refreshed after restarting Bridge.
And maybe run a check and repair permission with either Apple Disk utility or cocktail.
Unfortunately Bridge is not designed for use over a network nor official supported by Adobe when it comes networks.

Need help setting up Mac OSX Server for remote/off-site access

Hello, I want to be able to access our g5 tower running Mac OSX Server 10.5.8 remotely when not in the office. We have a static IP.
Are there easy step-by-step directions someone could provide or point me to? Thanks a bunch.

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

Script won't run on machine w/MAC OSX Server 10.4.9

Why won't the following script work on a machine that is running MAC OSX Server 10.4.9. On Machines running Mac OS X 10.4.9 it works fine, but on my server machine it won't name the file as per the script--the menu dialog box pops ("save as") up asking for a file name.??
The only difference between the machines as far as I can tell is the OS.
Thanks.
Pedro
global fileSpec
tell application "TextEdit"
activate
tell application "Finder" to set visible of process "TextEdit" to false
tell application "Finder"
set theFileName to "Date.rtf"
set fileSpec to "Photo [Data]:Archive error LOG:" & theFileName
end tell
save document 1 in fileSpec
tell text of document 1
set the size to 20
set the font to "Lucida Grande"
end tell
close document 1 saving yes
end tell
G5 Mac OS X (10.4.9)

Edit: sorry, you should be choosing a folder, not a file. Try this script instead.
tell application "Finder"
    activate
    set tempy to choose folder
    display dialog ("" & tempy)
end tell

Mac OSX Server VPN Not Working

Heres how my setup is: I have an ATT DHCP Server/Router That assigns my public ip.
I have an Apple AirPort Extreme in Bridge Mode Which hosts the main wifi connection.
I have my Mac OSX Server connected to the AirPort Extreme
On my ATT Router DHCP Server's Firewall I have my computer set to DMZ Plus mode which forwards all ports on the network to my mac.
I am trying to connect to the vpn network via my MacBook Pro and iPhone5 and I cannot. However I can connect to the online wiki page on my server by going to server.djswirkmke.com if you would like to see it. My host name is server.local on the network but on the internet it is server.djswirkmke.com I also have a mail domain setup as mail.djswirkmke.com. My problem is I am not able to connect to the vpn on the client computers can you please help?

In a moment of random frustration, I tried listing the DNS server in VPN settings three times, and it somehow fixed the problem. Even though it is the same IP all three times, it works when it is listed three times but not when it is listed just once.
In other words, in VPN > Settings > Client Information > DNS Servers, I have:
192.168.100.64
192.168.100.64
192.168.100.64
Hope this helps someone having the same problem.

What is xgrid admin in mac osx server?

Hello friends...
What is xgrid admin in mac osx server?

Xgrid is a grid or a compute cluster or distributed batch-processing engine. A grid allows an application programmer or system administrator to manage and coordinate a collection of computers and to distribute portions of a task across multiple computers.
Apple have [an Xgrid introduction|http://www.apple.com/server/macosx/technology/xgrid.html] available, and for details, have a look at the [Xgrid Administration and High Performance Computing|http://images.apple.com/server/macosx/docs/XgridAdmin_and_HPCv10.5.pdf] document that is available among the Mac OS X Server manuals.
Here is the [high-level overview of Mac OS X 10.5 Leopard Server technologies|http://www.apple.com/server/macosx/technology>, which can connect you with answers to many questions.

Where can I find the download for Mac OSX Server Mountain Lion ?

Where can I find the download for Mac OSX Server Mountain Lion ?

On the App Store. Search for it:

Configure MacMiniServer 2,53 GHz MAC OSX Server 10.6 via Windows 7 PC

Similar Messages

Maybe you are looking for