Configure microsoft products in Sap solution manager
Hello,
can any one tell me how to configure different microsoft products in sap solman.
As well as configure powerpoint desk in SOLMAN.
Thanks in advance.
Regards,
Ramkrishna
ramkrishna borhade wrote:
how to configure different microsoft products in sap solman.
As well as configure powerpoint desk in SOLMAN.
Ellaborate your requirement!! What do you mean by configure???
Feel free to revert back.
-=-Ragu
Similar Messages
-
How to configure dba cockpit in sap solution manager
Hello colleagues,
how to configure dba cockpit in sap solution manager??
Thanks!Hi Victor,
Please go through this doc, it might helps you.
Sap Solution Manager - Dbacockpit
Sap Solman Instguide Dba Cockpit Setup
Regards
Amit -
Configure Service Desk in SAP Solution Manager
Hi guys,
I'm currently trying to configure SAP Service desk to our custumers but i really dont know how much steps i must take to do that.
Im currently have users from satellite systems generated by tcode BP_GEN in Business Partners.
But, how it really goes?
When i using the following site:
http://ip:8000/sap/bc/webdynpro/sap/ags_workcenter?sap-client=001&sap-language=EN
which data i must provide to logon on workcenter!
How can i assign systems from one customer to the user that represents it to, when he logs to the workcenter, he can see the respective system information that belong to him.
I know that i must provide diferent roles for the administrator and the users that represent the customer!
Can anyone give any ideas or a point of direction?
Regards,
FilipeHi
Based upon the BP identification system entries maitained for respective users
they/Reporter can see only those systems in the list
Rest is same for all users they have to logon with userid pwd of solman in the URL
and automatically based upon the roles you have assigned to them in su01 they can see the reporter or processor interface of service desk
Regards
Prakhar -
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15
Hi all,
I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
Is someone know if it is normal or if it is necessary to patch solution manager ?
Is ther a documentation existing to configure ERP EHP4 systems ??
Thanks for your answer.
Regards
GerardI have not seen any document to configure EHP4 systems specfically.
I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
You might want to have a glance over some notes
Note 1283307 - SMSY: Product version cannot be determined correctly
Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
Note 1320545 - Updating the product version in SMSY -
Sap Solution Manager 7.1 SP11 Basic Configuration
Hi Experts,
I am in fresh installation for Sap Solution Manager 7.1 SP11. At Basis Configuartion Phase in step " Configure CA Introscope".
I have successfully installed, but it shows the following message: " Offline - The EM Connection cannot be established (caused by :com.sap.smd.introscope.em.IntroscopeException: java.lang.reflect.InvocationTargetException_) "
Need suggestions how to proceed from here.
thanksRaja,
I assume you're using Linux/UNIX.
Here's the solution. It worked for me.
In /usr/sap/ccms/apmintroscope/config/users.xml, update the Guest password with this MD5 hash: c4582df82299e0581a9fc6bb34c53
In user management screen of "Configure CA Introscope", choose "Guest" as connection user with password "guest12" (without quotation marks)
If it's still not working, then delete the EM and re-install the introscope.
Go to expert mode -> Delete references -> Remove the line
Delete folder /usr/sap/ccms/apmintroscope
Install introscope and management modules againdon't forget to re-set the permission for diagnostic agent user
Go back to solman_setup "Configure CA Introscope" and do import CA again
Save, you'll have a green status
Regards, -
Configuration for Central Monitoring System in SAP Solution Manager.
Hi Folks,
I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
There are couple of items on which I am really confused.
In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
Can you guys please help me to configure properly?
One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
Also, is there any document which clearly explains the setup of Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
I have SAP Solution Manager 7.0 EHP1.
Thanks.
JenniferHi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny -
Mail configuration in SAP SOLUTION MANAGER 7.1
Hi All,
I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
Does any one had configured mail in SAP for hosted on GOOGLE APPS?
Does SAP will support this as it is external (mail) server?
I read note 455140, related notes and configured accordingly.
Steps I followed:
1. parameters maintained:
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
is/SMTP/virt_host_0 = *:25000;
2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
b. Service data: Client 100, user: username, password: ***, language: EN.
c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
Saved Changes n Activated.
4.SAPconnect administration (SCOT):
a. Default domain: <companyname>.com
b. Nodes: SMTP Under node:
Mail Host: smtp.gmail.com
Mail Port: 25 and also tried 587
In Internet Address Area: *
5.Scheduled periodic Job with SAP&CONNECTALL variant
6. telnet <HOSTNAME> 25000 is successful
In both cases I am getting error as:
No delivery to ishan.sangai@<companyname>.com, authentication required
Message no. XS853
Diagnosis
The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
Information from External System
_530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
Procedure
The administration settings must be changed. The specified mail server must not request authentication.
7. I tried to telnet smtp.gmail.com 25 and 587 also
I am getting following output:
220 mx.google.com ESMTP ds5sm2193379ibb.5
HELO <HOSTNAME>
250 mx.google.com at your service
HELO <companyname>.com
250 mx.google.com at your service
MAIL FROM solman_admin@<companyname>.com ENVID=12345
530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
Does we need to talk with Google Apps provider for any modifications to be made for this.
if yes, which changes should I request them?
Please help me to solve this problem.
Please provide links,guides.notes etc. for this scenario
Thanks & Regards,
IshanHi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
SAP Solution Manager and SAP Production Server on Single Host
We are rolling out our new infrastructure using high end Solaris Servers that have plenty of grunt.
I am looking at running SAP Solution Manager 7 and SAP Netweaver 6 on the same HOST using two Oracle databases.
We will use 10g and have 2 separate transport volumes for transports. The Development and test environments will be very similar.
Appreciate any advise or thoughts. We are not looking at virtualising this particular environment.Technically you can do that - yes. I could also imagine in installing the ERP on the bare metal and the SolMan in a zone, together with a processor set you can limit resource usage and you´re totally isolated from your production environment and will so make sure that SolMan is not stealing necessary resources from your production environment.
Markus -
Configuration information is only available in SAP Solution Manager.
Configuration information is only available in SAP Solution Manager.
I always read about this.
But how find it in the sol man system actually?
Thanks very much.Hi
do you mean IMG configuration of ABAP scenarios?
when you create the project in solution manager you can see all its configuration information on the tabs(TA Solar_project_Admin)
for the ABAP scenarios, executable configuration files (IMGs) are available. SAP Solution Manager has the capability of executing the ABAP scenarios IMG files during the configuration and management of the system landscape(TA Solar02)
I could suggest please go the link service.sap.com/solutionmanager.for needed informantion
Jansi -
Configuration Guide in SAP Solution Manager
Hi all,
I'm reading documentation on a CRM scenario (Investigative Case Management : ICM). It says that the ICM configuration guide is assigned to the scenario 'Criminal Investigation Processing' (Public Security) in the SAP Solution Manager.
I don't have access to the SAP Solution Manager but wanted to know if I could find this ICM configuration guide somewhere on the SAP Market Place.
Alternatively, if I could access a SAP solution Manager system, how could I access this ICM configuration guide?
Thanks a lot in advance
Best regards
StephanieHi
this will solve ur prob
https://websmp210.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Regards
Prakhar -
Configuration Guide Job Scheduling Management with SAP Solution Manager
Dear Gurus
Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
Best RegardsHello Luis,
the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
1. Activate Solution Manager Services
2. Set Up Work Center for Job Scheduling Management
Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
The following SAP notes might be usefuly as well:
1054005 - FAQ on Job Scheduling Management
1117355 - Work Center roles
Kind regards,
Martin
http://service.sap.com/jsm -
SAP EHP 1 for SAP Solution Manager 7.0 configuration check
Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM -
FAQ - SAP Solution Manager for VARs
You can find further technical questions around configuration & functionalities in a comprehensive
FAQ to SAP Solution Manager for VARs.
This FAQ covers questions and answers around:
> SAP Solution Manager, enterprise edition
> SAP Solution Manager VAR setup: configuration of Service Desk
> Work Center Service Desk: functions & configuration
> Work Center System Monitoring: setup of SAP EarlyWatch Alert
You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
Please notice: The FAQ will be updated from time to time.
Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
Edited by: Susanne Schlehf on May 18, 2009 12:56 PMHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich -
Upgrade to SAP Solution Manager 3.2 to 7.0 EHP
Dear Experts
At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
what i do please help me.
Regards
Sanjay C.EHP1 is basically a product enhancement of 700 - i.e offers new functionality
Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
I think this proposal will require first an upgrade from 3.2 to 4.0
then after applying Enhancement Package EHP1 and following pre-reqs for both steps
Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
all RFC connections will need to be adapted
There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
Best wishes
Stuart -
Business Process Modeling in SAP Solution Manager
Hi.
Even ther an Solution Manager space, i wish to get some opinion related to Business process Modeling.
We are working in an upgrade project. R/3 4.6 C to ECC 6.0. The customer decide to use Solution manager to map their process, based on the transactions of the new version.
Company Business Process:
1.Based on ISO standards.
2.By product line
3.The process are defined using an structure with 4 Levels: Macro Process, Business scenarios, Business Process and Steps/activities.
There are 2 possibilities to map the process into the Sap Solution Manager:
1. Map the process by component.
- Single Project
-It means to make a list of all sap components with their process without mattering the business process.
-Each product line can be a variant for an specific process. e.g: Sales by line
2. Map the process as ISO Standards
- Several projects : For each product line
Which cold be the better option in order to:
- Easy configuration activities
- Easy design of Unit and integration test
- Easy activities of Process enhancement and optimization
Theres another option?
Thanks
Alvaro Hernán Rojas RHi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh
Maybe you are looking for
-
please help
-
XML data via JS not showing in I.E.?
Hi there, I'm using Javascript to get the xml data and display it on the XHTML page. This works fine in all the latest versions of Firefox, Chrome, Safari and Opera....but as per usual not in Internet Explorer. UPDATE: forgot to mention.....I'm testi
-
Newbe Question: Setting a cursor image from a source file
I have a panel that is dynamiclly loaded with images from files. I wanted to set the cursor to the image, originally I was going to load a sprite with the image and have it follow the cursor but I figured that it might be better using the CursorManag
-
What do I have to do with a dreamweaver built app so I can upload it to the android market
I am having trouble with using eclipse to package my dreaweaver app to upload to the android market. Can anyone help? Is there any easier way to do this. Im using Dreamweaver CS5.5
-
Mail won't open, permissions error
Under Mountain Lion, I am getting an error opening Mail: "Mail can't open because you don't have the necessary permissions to change the folder where it saves information. Mail stores information in /Macintosh HD/Users/cutterd/Dropbox/Mail. If this f