Configure security BEFW11S4

I need to re-configure the security for this router and my new adapter, after everything had to be re-set. The password I had setup for 192.168.1.1 doesn't let me into the setup page. Because the router is out of warranty, tech support says i have to pay $30 for help. Can anyone tell me how to get into the setup page?
thank you

To reset your router push and hold the reset button for 30 seconds or more then wait 2-3 minutes for the router to reload. That will reset everything to default settings so from there open your browser and in the address field type n http://192.168.1.1 and hit enter. That should open the routers Log in screen where by default the user is left blank and the password is admin. That should bring you to the routers user interface where you can reconfigure it for your ISP/security and routers password.
NOTE: WEP is no longer recommended due to the FBI proving it can be cracked with in minutes. WPA or WPA2 is recommended if your devices support them.
Message Edited by Ikester on 06-18-200702:52 PM
Richard Aichner (Ikester)

Similar Messages

How to configure Security services in OSB 11g..

We are integration OSB with BANK application, we will be using SSL certificate for the same.
Please help how to configure security policy in OSB.
I checked below link policy defination
http://tim.blackamber.org.uk/?p=825
but in OSB proxy service we are not able see Policy button.
Please help.
Thanks,
Mihir

Please post your query in SOA Suite forum -
SOA Suite
Regards,
Anuj

Unable to configure security

I am stuck in a security exception while configuring security for WCM spaces.
I have configured the security using oracle fusion middleware control and had generated the keystores.
However when I run the application, it is giving me the below exception
<WsmMessageLogger><logSevere> The specified keystore file C:\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\config\fmwconfig\default-keystore.jks cannot be found; it either does not exist or its path is not included in the application classpath.
<WsmMessageLogger><logSevere> Keystore is not properly configured in JPS config.
<WsmLogUtil><log> Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=null, composite=null, modelObj=http:/
The issue here is when I configure the security, it updates the jps-config and other files in location “D:\Oracle\Middleware1\user_projects\domains\base_domain\config\fmwconfig” . So after deploying, it should ideally deploy those files in application data , something like C:\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\config\...... However, when I try to see the details of the jps-config file in the location, it is still pointing to old keystores and is not getting updated. I even tried deleting the whole “system11.1.1.2.36.55.36\DefaultDomain” folder and generating them again after server restarts
If I try to manually overwrite the keystore in application data files, it gives me the below exception.
<WsmLogUtil><log> Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=null, composite=null, modelObj=http://oracle.webcenter.spaces.internal.view.ws/#wsdl.endpoint(SpacesWebService/SpacesWebServiceSoapHttpPort), policy=null, policyVersion=null, assertionName=null.
oracle.wsm.common.sdk.WSMException: WSM-00055 : The keystore located at C:\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\config\fmwconfig\default-keystore.jks can ot be loaded due to java.io.IOException. Ensure that valid keystore type and password are configured.

I configured the keysotre as well and I am able to access webservice using webservice client as well but there are certain method for which i need SpaceClient API for space RSS feed
following is the code to access
GroupSpaceWSContext context;
context = new GroupSpaceWSContext();
GroupSpaceWSClient groupSpaceWSClient;
context.setEndPoint("http://webcenterhost:port/webcenter/SpacesWebService");
context.setSamlIssuerName("http://webcenterhost:port/webcenter");
context.setRecipientKeyAlias("producer");
try {
groupSpaceWSClient = new GroupSpaceWSClient(context);
System.out.println("retun "+groupSpaceWSClient.getPublicGroupSpaces("Space Name"));
} catch (GroupSpaceWSException e) {e.printStackTrace();}
while running I am getting following errororacle.webcenter.spaces.ws.client.GroupSpaceWSException: javax.xml.ws.soap.SOAPFaultException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security.
at oracle.webcenter.spaces.ws.client.GroupSpaceWSClient.getPublicGroupSpaces(GroupSpaceWSClient.java:828)

Configure security with principals.xml

Hello!
I'm trying to configure security in Oracle IAS 9.0.4. I have two applications into an OC4J instance. I've configured an admin user with RMI connection permission in the intance's principals.xml file. I've configured another admin user with RMI connection permission in each of the applications' principals.xml.
One of the applications is trying to connect via JMS to other's queue, but it can't. If I execute a Junit external test, I get an invalid username/password error, but from the first application I get an NameNotFoundException because it says it can't locate my ConnectionFactory class.
I've configured the ConnectionFactory class and queue properly in instance's jms.xml file.
I have two questions. First question is why I get different error messages depending from where I try to connect to? Second question is what's the better way to configure security with principals.xml if I want to share user's configuration across applications inside an OC4J instance?
I have to mention that with an OC4J standalone deployment I had no problem and all worked fine, so I suspect I've missconfigured something at IAS, but I didn't found any document explaining inheritance clearly neither principals.xml at instance - applications context.
Thank you in advance.
Eva.

We don't use principals.xml any more and have adopted the use of the JAAS, via our implementation which goes under the moniker of JAZN.
I'd have a peruse through the OC4J Security guide as a good starting point:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28957/toc.htm
The general J2EE doc library is here:
http://download.oracle.com/docs/cd/B32110_01/web.htm
-steve-

How to configure security realm for Active Directory ?

Hi,
Can any body suggest how to configure security realm in weblogic 8.1
I have simple login page where in user can enter his credentials, and i have MS-Active Directory where we maintain all users.
users who loged into web application has to be authenticated from Active Directory.
please suggest what are the steps that we need to follow
thanks in advance

Hi Sankar,
You can login to the weblogic server admin console and create a new realm.
Once you have created the realm you can add the authentication provider.You add the Active Authentication Provider.But you must have the the configuration inforamation of MS AD.You can read my blog http://dev2dev.bea.com/blog/bishnu_kumar/
where the integration is with iPlanet LDAP.Steps will be similar.
You must have a login portlet in your portal application and that should have been in accordance with j2ee security standards.For example you may use basic authentication or userlogin control or p13n API
Regards
Bishnu

How to configure security policies like account locking, account expiry in portal application?

Hi All,
Can anybody pls tell me how to configure security policies like account locking,
account expiry in portal application? By default, it has a 30 minutes lock period
after 5 retries. But if I want to set other values or want to unlock account of
a user, then what to do ?
TIA,
Sudarson

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Configuring Security for Weblogic webservice

We have developed a webservice using WLS 7.0 , now comes the next question how
to make it secured from unauthorized access. We tried to get info from "Programming
WebLogic Web Service" documentation (Chapter - Configuring Security) from bea
site, but we couldnt get much info from this. We want to know what are all the
different ways in which we can secure the webservices in weblogic 7.0. It will
be better to get some code samples which implements security.

Hello,
I'd recommend starting with the simpleSSL example:
http://webservice.bea.com/index.html#qz24
Also you may want to visit the security section:
http://webservice.bea.com/wswa.html
HTHs,
Bruce
Anish wrote:
>
We have developed a webservice using WLS 7.0 , now comes the next question how
to make it secured from unauthorized access. We tried to get info from "Programming
WebLogic Web Service" documentation (Chapter - Configuring Security) from bea
site, but we couldnt get much info from this. We want to know what are all the
different ways in which we can secure the webservices in weblogic 7.0. It will
be better to get some code samples which implements security.

Using WLST to configure security in application deployments ?

Hi,
I would like to configure security (create roles and policies) in an application through WLST.
I did not manage to find what MBeans are available for this, not how to navigate to them.
Is it possible to configure security for an application (that is not in the domain or server realms, but as in the console from the security tab of a specific deployed application) through WLST ?
Thanks for your help.
Hugues

Bengt,
Configuring security policy via MBeans is not supported, console uses
internal api to achieve that. Said that, I will see if I can do anything.
Thanks,
-satya
Bengt Rodehav wrote:
We use WLST to configure our servers. Unfortunately we haven't found out how to configure a security policy via WLST.
In our case we need to define a security policy on our JMS queues. Presently we have to do this manually via the administration console. Can this be done with WLST?
Bengt Rodehav

Localy configured security policy in domain environment

Hello.
I have run in to a problem when configuring security policy for servers in my domain. Due to the large size of my environment and many different local administrators on servers quite a few of those administrators has configured local security policys on
their servers instead of asking for our central IT-dep to create domain based GPO's for those settings.
It's quite often settings that give a account the right to logon as a batchjob and so on. This creates the problem for us that work centraly that we can't configure central GPO since we will overwrite the localy configured ones and that will quite often
create a application to stop working.
So my question is if there's any way to make a inventory to find out what servers has a local configured policy so that i can change that to a central one.
/Lee

You can use secedit to get the local security policy. You can use
psexec to get it remotely and store the content in a share. Once done, you can fetch the data using Powershell and get what you need.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

New SDN blog post: Configuring security in STVN2.1 OrgChart

Hi all,
I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
[/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
Enjoy!
Luke

Hi all,
I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
[/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
Enjoy!
Luke

Configuring Security With 11g

Hi,
I have just started with the 11g version and couldn't find the Web service manager component.
So how are the security policies to be defined which were earlier handled by the gateway and the agents?
Moreover earlier there was the application server console from where the datasources,jms destination,adapters etc were configured?Which console do we use with the present installation?
There was also a convenient way to see and test the webservices from this application server console,how all these can be accessed with the newer version?
Other than the developer's guide for the soa suite 10g are there any other documents and sample codes to be released for the bpel,mediator and the bam components?
Thanks.

Hello, I guess security will be done with the Oracle Policy Manager. Check the developer guide (section 1.3.1.6) and take a look at the http://www.oracle.com/technology/products/ias/bpel/techpreview/s291362-whats-new-in-oracle-soa-suite.pdf slide 27. The AS isn't available yet so that's why soa development is done against an integrated oc4j (I guess?). In the presentation you can also see (slide 30) that monitoring will be available through the Fusion Middleware Contol.

Configure security-role and method permission for EJB 3.0 using Jdev 11g

The EJB 3.0 session bean created by Jdev 11g EJB wizard does not have ejb-jar.xml. Where and how can security-role and method permission for the EJB be configured?
For example,
<assembly-descriptor>
<security-role>
<role-name>managers</role-name>
</security-role>
<method-permission>
<role-name>managers</role-name>
<method>
<ejb-name>Employees</ejb-name>
<method-name>setSalary</method-name>
<method-params>
<method-param>java.lang.Long</method-param>
</method-params>
</method>
</method-permission>
</assembly-descriptor>

user516954,
By default annotations are used. However, you can create a new descriptor and that will take presidence over any declared annotation.
--Ric

Configuring security at cluster level!

We have a weblogic (6.1 sp3) cluster with 8 managed server instances. We are using
IBM secureway for LDAP authentication. All the weblogic servers failed to respond
when the LDAP server stopped for some reason. Even weblogic GUI console failed
to respond. After the LDAP server was brought up Weblogic servers started responding.
As I understand the reason could be attributed to security being configured at
the domain level. Is there any way by which ldap security can be achieved at cluster
level? We have 2 different cluseters and only managed servers in cluster 1 (and
also the application deployed to cluster 1) requires LDAP authentication!
Thanks,
Srini

Hi,
What version are you on? Are you sure you have only lost security on one dimension?
We have had similar issues on 9.3.1 where refreshing the Planning sec filters causes most of the security to disappear (security on dimensions, forms and tasks lists). This has happened 4 times in the past 12 months and we havent been able to identify the root cause. All we know is that the sec filter refresh causes the issue.
Seb

Configure security realm for external Access Manager in App server 8.1

Hi All,
I would like to protect my j2ee application using access manager running on an external host.
I would like to configure the security realm in Sun app Server 8.1 for the external Access Manager
external host & port of AM is:
http://svrd234d.dnn.com.au:58765
Please verify if these are the correct settings for the agentRealm configuration on Sun App server 8.1.
classname="com.sun.amagent.as.realm.AgentRealm"
property name="jaas-context" value="agentRealm"
property name="base-dn" value="ou=People,dc=dnn,dc=com,dc=au"
property name="hostURL " value="http://svrd234d.dnn.com.au:58765"

Did you download AS8.1 agent under http://www.sun.com/download/products.xml?id=4266924d?
If you can unjar am_as81_agent_2_1.jar after installing the J2EE agent, you will find AgentRealm.class under com.sun.amagent.as.realm.
Please also note that page 161 of J2EE agent guide shows how to disable AgentRealm to better fit your agent policy mode. Check it out http://docs-pdf.sun.com/816-6884-10/816-6884-10.pdf
Jerry

Tesco mail configuration - security certificate problems

I have configured Tesco.net messages to be picked up in Mozilla Thunderbird, but whether or not I am using the program I keep getting a box to tell me to 'add security exception', because Tesco is attempting to identify itself with invalid information. The security information is, in fact, correct, but although I click the 'confirm security exception' button, the program won't accept it. Sometimes, I have to click the button 10 or 15 times before the box disappears, only to reappear several times during the course of the day.
How can I stop this?

What reason does Thunderbird give for rejecting the cert in the first place?
More information in this article.
https://support.mozilla.org/en-US/kb/add-security-exception
There have been reports before about a bad Tesco cert, so I guess they still haven't managed to fix it.

Configure security BEFW11S4

Similar Messages

Maybe you are looking for