Configure Universal Access? what is it..

I have iPhone attached, and in lower portion of pane on computer from summary/options is button 'Configure Universal Access'.
What is this?
I tried every search option in iTune help menu, and they don't bother listing it.
I'm not going to experiment with unknowns, thanks'
Also the iTunes welcome to Itunes page is up, and again nothing there in sync iPhone video.

Philscbx wrote:
Someone at http://forums.macrumors.com/showthread.php?t=725859&highlight=configureuniversalaccess found the altered term of it.
Don't know how link got messed up, but this is corrected.
http://www.apple.com/iphone/iphone-3gs/accessibility.html
Its a bit more direct than a Google list / http://www.google.com/search?btnG=1&pws=0&q=iphoneconfigure+universalaccess
Message was edited by: Philscbx

Similar Messages

  • What Does "Configure Universal Access" in iTunes do?

    What Does “Configure Universal Access” in iTunes do?

    Configure universal access does in fact just bring you to settings like large text and voiceover designed to help the impaired
    the fact your phone disapeered after hitting it was probably just an unrelated glitch in itunes. Unplug and replug your phone to get it to show up again

  • Configure Universal Access in itunes means??????????

    I clicked "Configure Universal Access" in itunes, my device was removed from the list on the left hand side where devices are listed etc. What does this button do? All I have found out is that its to do with vision impaired and hard of hearing people. Still not definitive enough of an answer for me. cheers

    Configure universal access does in fact just bring you to settings like large text and voiceover designed to help the impaired
    the fact your phone disapeered after hitting it was probably just an unrelated glitch in itunes. Unplug and replug your phone to get it to show up again

  • How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

    Can someone help me?How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

    What really cheeses me off here is that Apple isn't allowing users enough customization.  With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options.  If Apple keeps this up, they're going to start losing customers fast.  I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
    What I don't understand about how they won't let users delete the list of available podcasts now is why?  How is this making it a better program?  I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was).  But to not give users the option to delete that list?  It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating.  I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature.  It smacks of rank incompetence.
    What improvement were they trying to make here anyway?  There was nothing wrong to my mind about how podcasts were managed in previous versions.  Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
    And reverting to a previous version is no solution.  I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

  • I am trying to download (share) selected photos from my Mac to my i-pad. Get as far as hitting apply but nothing happens. What is universal access...should I hit that button?

    I am trying to  share selected photos from my Mac to my I Pad.I went into I-Tunes and  followed the instructions and am fine until it says to hit apply....which I do and nothing happens. I can't seem to highlight the I Pad "device" logo on the (left side of the I-Tunes) list to be able to share the photos. (I still want to keep them in my Mac, also). At the bottom of the instructions to accomplish this it says Universal Access...should I  click on that? And what is it? Should I be selecting synch thru wi-fi?

    Eject the iPad if necessary, quit iTunes and restart your Mac.
    Connect the iPad to your Mac with the cable and launch iTunes. Now see if you can click on the iPad name on the left side of iTunes. If you can, go into the photos tab of iTunes in the window on the right and make sure that the Sync Photos heading is checked. Then select the folder form which you want to sync photos - maybe iPhoto on your Mac? Then select all of the albums, events, faces - however you have them set up - then click on Apply. See if that works.
    The photos will still be on your Mac after you sync. Do not click on Universal Access - you don't need that to sync.
    Here is a very helpful Apple support article that you can read as well.
    http://support.apple.com/kb/HT4236
    You can deal with WiFi sync later.
    Message was edited by: Demo

  • I need helping!!! configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.

    I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
    I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
    I need to allow the following IP addresses to have RDP access to my server:
    66.237.238.193-66.237.238.222
    69.195.249.177-69.195.249.190
    69.65.80.240-69.65.80.249
    My external WAN server info is - 99.89.69.333
    The internal IP address of my server is - 192.168.6.2
    The other server shows up as 99.89.69.334 but is working fine.
    I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
    THE FOLLOWING IS MY CONFIGURATION FILE
    Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
    Also the bolded lines are the modifications I made but that arent working.
    ASA Version 7.2(4)
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password DowJbZ7jrm5Nkm5B encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.6.254 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 99.89.69.233 255.255.255.248
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    object-group network EMRMC
    network-object 10.1.2.0 255.255.255.0
    network-object 192.168.10.0 255.255.255.0
    network-object 192.168.11.0 255.255.255.0
    network-object 172.16.0.0 255.255.0.0
    network-object 192.168.9.0 255.255.255.0
    object-group service RDP tcp
    description RDP
    port-object eq 3389
    object-group service GMED tcp
    description GMED
    port-object eq 3390
    object-group service MarsAccess tcp
    description MarsAccess
    port-object range pcanywhere-data 5632
    object-group service MarsFTP tcp
    description MarsFTP
    port-object range ftp-data ftp
    object-group service MarsSupportAppls tcp
    description MarsSupportAppls
    port-object eq 1972
    object-group service MarsUpdatePort tcp
    description MarsUpdatePort
    port-object eq 7835
    object-group service NM1503 tcp
    description NM1503
    port-object eq 1503
    object-group service NM1720 tcp
    description NM1720
    port-object eq h323
    object-group service NM1731 tcp
    description NM1731
    port-object eq 1731
    object-group service NM389 tcp
    description NM389
    port-object eq ldap
    object-group service NM522 tcp
    description NM522
    port-object eq 522
    object-group service SSL tcp
    description SSL
    port-object eq https
    object-group service rdp tcp
    port-object eq 3389
    access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
    access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
    access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
    access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
    access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
    access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
    access-list outside_access_in extended permit tcp any interface outside eq 3389
    access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
    access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
    access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
    access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-524.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
    static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    http server enable
    http 192.168.6.0 255.255.255.0 inside
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set peer 68.156.148.5
    crypto map outside_map 1 set transform-set ESP-3DES-MD5
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash md5
    group 1
    lifetime 86400
    crypto isakmp policy 30
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    tunnel-group 68.156.148.5 type ipsec-l2l
    tunnel-group 68.156.148.5 ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
    : end
    ciscoasa(config-network)#

    Unclear what did not work.  In your original post you include said some commands were added but don't work:
    static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
    and later you state you add another command that gets an error:
    static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
    You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
    The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface.  Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
    Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive?  Static PAT usually makes sense when you need to change the TCP port number.  In your example, you are not changing the TCP port 3389.

  • How to configure MS-Access 2010 DB details on weblogc using DBAdapter

    Hi Experts,
    Can any one help me how to configure MS-Access 2010 DB details on weblogic 11g using DBAdapters.
    If you provide step by step instuction, it is very usful to me.
    If you have any screen shots you can any one please send a file to my mail ID:[email protected]
    My Requirement:
    I need to fetch 3 columns data (product code/ serial numer and serial status) from MS-Access 2010 and store it on oracle 11g, for that I have wrote a web service code and I need to make it automation. I don't have any IDEA, how to make this web serevice as automation (automation means, when ever new record stored in MS-Access data I need to fetch newly created record from MS-Access 2010 and send it to Oracle 11g)
    Note: MS- Access 2010 present at vision system and Oracle 11g installed in linux server.
    Thanks,
    Phani

    Hi,
    I am also facing the same issue, not sure about what url to use. And also the login webservice doesn't work while I am testing using http://localhost:81/RTC/RTCService.asmx. It always throwing the following error
    " Unable to cast COM object of type 'RTCLib.RTCClientClass' to interface type 'RTCLib.IRTCClient'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{07829E45-9A34-408E-A011-BDDF13487CD1}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."
    Is the current owc_lcs.zip support MS Office Communication Server 2007?
    Please share the configuration step if anyone already integrated OCS 2007.
    Thanks,
    -Mukesh.
    Edited by: user9127933 on Feb 19, 2010 4:05 AM

  • Help!  Universal Access Screen -how do I get my normal view back?

    I was browsing through System Preferences trying to learn stuff on my Mac, and I clicked on "Universal Access" icon to see what it was about. Now my screen view is all messed up and I have no idea how to get back my normal setting. Also, how is it that I just click on it and it changes with no warning? Obviously I have no clue about any of this, which is why I'm trying to learn but I'm scared to try anything for fear of screwing it up. Any help would be so much appreciated. Thanks, Ellen

    Now I've gone and really screwed it up. The entire screen is black and I can't see the Keyboard shortcuts so I just shut it down and went into my 2nd user account so I could see the screen and follow up on this forum. I went to the article to check out the keyboard shortcuts and I think I hit Control F1 - had no idea which one to try as I have no idea what any of them mean (yeah, stupid, I know) and then I started pressing all kinds of keys, option command, shift, control, F1 anything I could think of to get any kind of response and nothing, black screen. And I guess the Zoom key is confusing causes I don't understand how "Zoom" can control colors? What a mess I've created and I have no clue as to the shortcut keys ... I never use them. I feel like such an idiot!!!!

  • Enable universal access for steam is not enabled - how do I turn it on?

    In order to get some functionality from steam to be enabled, I understand I need to enable universal access for steam on my computer.  When I try to do this, its greyed out showing it can't be enabled.  How can I enable it / what would cause it to grey out?  Here's the screenshot.

    Hi there.  Just spotted your question.  Try clicking the padlock on the bottom left, enter the admin password and bob is your mothers brother. j

  • How to configure the Access Server?

    Hi All
    I am in the process of migrating from 11.0.1 to 12.0.
    I have some real-time jobs.
    For this I need to configure the Access Server.
    I can understand I should do this from Server Manager>Edit Access Server Config>Add
    Here what info we need to give? Does it mean we need to give the server name on which current version is installed? How to choose the port?
    My old version DI 11.0.1 is using port 4000. Also in the DS Mgmt Console, I am defaultly getting the Old Job Server in the Adapter Config node. How to remove this?
    Someone plz help me on this.
    Thank You
    Ganesh Sampath

    You have to explicitly share directories on external/secondary volumes.
    Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients.

  • Am I able to turn Universal Access off?

    I work with many labs in a high school full of eMac computers running OS 10.4.11 and am having trouble will Universal Access features. The features are great for the users who need them, but in many cases make the computer unusable by users who don't unless someone knows the shortcuts to toggle that feature.
    Even in a managed environment (using Workgroup Manager locally on the machine to manage accounts) users are able to use the shortcuts to invert the color, turn voiceover on, and zoom.
    Does anyone know of anyway to disable Universal Access completely?

    Hello,
    I apologise for duplicating this post from the Leopard threads, but it's quite short! I suggest using this as a pedagogical opportunity.
    Turn on VoiceOver on one machine and blindfold a volunteer. This is more dramatic and will have a bigger impact than simply activating the screen curtain. Explain to the kids the use of VoiceOver and guide your volunteer through a simple task such as creating a postcard home in TextEdit.
    When they realise just how useful VO is, and at the same time how difficult it is to navigate a machine when you can't see the screen, you should have no more discipline problems. I think all you'll be left with is a sense of awe among the kids that such a thing is possible.
    And if you really want to shock them, try playing them some of the videos from the AssistiveWare site. I'd suggest using Anne's to give a short intro to the use of VoiceOver professionally, and then Marie-France's, showing just what an effect VO can have. As a tip on the latter, translate the message Marie-France types to her mother: "Maman, peux-tu mettre ma tête droite?" (Mum, can you straighten my head for me?). I'm certain the sheer punch of this simple message from someone so helpless as to be unable to put her own head in a comfortable position will put an end to any cynicism or amusement. Since most kids carry an iPod or similar device with them, you could then get them to plug the earbuds into their machines and try the basic steps for themselves—without interfering with each other.
    Finally, I'd also suggest that you post up a list of the shortcuts to turn on and off the various Universal Access facilities, with a brief explanation of the role and function of each.
    HTH
    Archie

  • E4200 - Configure guest access

    In my neighborhood, people generally allow open WiFi access to each other. The "guest access" feature of this router sounded good - you can allow guests to access the internet, without allowing them access to your own computer's transmissions. However, annoyingly, there is no way to configure guest access without a password. You can change the password, but guests have to come see you and ask you what the password is. No freedom to configure the router the way I want. Sending it back for a refund.

    Well, if you have configured the router manually or even with the Cisco Connect you cannot disable the open security mode for the guest network. A password will have to be entered after launching a web browser.
    The secured mode of the Guest Network cannot be disabled and will always require your guests to enter a password through a web browser. The prompt will appear everytime guests connect. This is to prevent unauthorized Internet access.

  • Universal Access only showing at log-in screen

    For some reason Universal Access is only showing at log in on my school iMac. I have logged into the admin account and checked universal access, but it is turned off. It is giving me the little black box that tells me where my cursor is and what it does. For example at the log-in "Name" field it is surrounded in a black border and the black box says "You are currently on a text field. To enter text in this field, type."
    Any help would be great.

    Hi there,
    Firstly make sure you have restarted your computer, and tried again.
    Then complete these simple troubleshooting steps.
    Let me know if they help, and if not, Ill get back to you with some further troubleshooting steps.
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/ht3964

  • I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

    I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
    I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

    Hi,
    In addition, please make sure that the port 443 is not blocked by the firewall.
    Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
    these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
    placed in front of the Web Application Proxy server.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How-To Delete Boot Camp Partition with Parallels Configure to Access It

    Hi Everyone,
    I would like to delete my boot camp partition from my MB to reclaim some space due to the increasing storage demand from iTunes library? (I need to find out what can I do when the library is getting larger than my HD too, but that's another topic...)
    I also have Parellels Desktop configure to access the boot camp partition instead of creating its own virtual hard drive. I'd like to know if there's any problem with my parallels after I delete the boot camp hard drive? Will I have to reinstall my Windows XP OS again after deleting the partition?
    Thank you,
    Nacintosh520

    Hi Eric
    Are you saying that I have to reinstall my Windows XP OS all over again, with the patch and everything after deleting the BC partition? Is there a way to create a virtual hard drive from the BC partition of what I have? It's such a time-consuming process that I have to tweak the OS to the way I'd like it.
    I wonder what solution will Apple offer when they offer more and more content, and space for each computer is limited. I did some research on this issue and it turns out that the solution is the set the option in iTunes to "Manually manage my music files" in the Preferences panel. I don't want to do this because if I set this option, my files won't be organized any more, and it's gonna be all over the places. But I guess I have to do this until Apple offer an option such as "Move my Podcasts file to _ external hard drive" to keep everything stay organized.
    Thank you,
    Nacintosh520

Maybe you are looking for