Configuring Application Porvider Services (APS) for SmartView V11 - Linux

I have got a distributed architecture for Hyperion Planning. Essbase is hosted on a Linux server.
The essbase is registered to the Shared Services hosted on a different server.
While trying to create a data connection through Common Services Provider (in Smart View - Ver 11) the URL does not get resolved.
Is there a way to configure APS to the shared services.
Many Thanks.............

Can you give some details about your architecture?
In general do some checks:
1. During installation of provider services web-application, did it register correctly with the Shared Services.
2. Refer to the manual deployment guide and find the URL which will tell you if the deployment is fine.
3. In Essbase administration console, add the provider server under Hyperion Provider Servers.
4. Ping the APS server and netstat to see if the service is up.
Regards,
Sayantan

Similar Messages

Find Next button is not working in member selection for Smartview V11.1.2.1

Hello,
Quite urgent.
When group of users select Smartview --> Member Selection --> "FindNext" or "Find" button is not working.
The same option is working fine with my credentials. But problem exists for set of 3 users.
Please suggest asap.
Thanks in Advance,
Tej

Hi Iain,
Thanks for your reply.
* All 3 users are part of same group.
* Created user with similar group and checked for member selection option to verify "Find Next" button functionality. It worked fine.
* Verified filters assigned to this group. No filters are assigned.
* Checked for version again - Version is V11.1.2.1.00 (Build 271). It is exactly same as other systems where the functionality is working fine.
* Installation is carried out by company IT team as administrator, so that can not be an issue.
kindly suggest if you have any other inputs to be verified.
Best Regards,
Tej

WCF service application hosted in IIS for reading Windows server service bus topic/subscription

We have a WCF service application(not web application) which is deployed in IIS 8 pointing to the windows server service bus topic/subscription. We have configured the WCF service with applicationInitialization feature of IIS 8 to warm up.
But the WCF service is not reading any message from the topic/subscription.
configured in web.config file as below
<system.webServer>
<applicationInitialization>
<add initializationPage="/MyService.svc" />
</applicationInitialization>
</system.webServer>
When we run the same from visual studio its reading messages from topic/subscription.
any configuration/settings which we are missing?

You probably didn't initialize correctly the auto-start. Btw. I would recommend you to use AppFabric for this feature. It is more transparent in development and production.
Please take a look on following posts:
http://social.technet.microsoft.com/wiki/contents/articles/1284.host-wcf-services-with-service-bus-endpoints-in-iis-and-windows-server-appfabric.aspx
http://developers.de/blogs/damir_dobric/archive/2009/10/11/iis-7-5-and-always-running-web-applications.aspx
http://developers.de/blogs/damir_dobric/archive/2010/06/11/appfabric-issue-with-aoutostart.aspx
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com

Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance

Hi
in our shaepoint farm we have a application server,one wfe server and one reporting server
and we are using BI solutions and running performance point service
i keep getting below error in wfe server and reporting server as well also.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server
Date:          01/09/35 02:23:34 م
Event ID:      6481
Task Category: Shared Services
Level:         Error
Keywords:
User:          XYZPORTAL\spfarm
Computer:      XYZWFE02.XYZportal.com
Description:
Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance (b340454e-ab06-4981-80f7-81d2326a1b32).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296)
process, on machine XYZWFE02. View the tracing log for more information about the conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance
was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server" Guid="{C33B4F2A-64E9-4B39-BD72-F0C2F27A619A}" />
    <EventID>6481</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-28T11:23:34.565108900Z" />
    <EventRecordID>1419864</EventRecordID>
    <Correlation ActivityID="{CEACAABB-34A0-41F6-88B0-0834929B654C}" />
    <Execution ProcessID="14104" ThreadID="19380" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-21-681022615-1803309023-368063384-1108" />
</System>
<EventData>
    <Data Name="string0">Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance</Data>
    <Data Name="string1">b340454e-ab06-4981-80f7-81d2326a1b32</Data>
    <Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was
updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.</Data>
    <Data Name="string3">Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must
re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)</Data>
</EventData>
</Event>
adil

HI
I cleared the configuration cache and restarted the Reporting server ,
and performance point service,
and bi Pointers working fine and after some time it stopped to render data,
and received below error messge in wfe server
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          04/09/35 01:44:58
م
Event ID:      1
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>1</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-01T10:44:58.277694100Z" />
    <EventRecordID>1426175</EventRecordID>
    <Correlation ActivityID="{C4FDF79F-347D-48C5-8F2D-B732D353F20E}" />
    <Execution ProcessID="17088" ThreadID="18964" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
</Event>
adil

Services missing for DUET Configuration

Hi all,
In configuring DUET Enterprise, certain services are missed out which are required for completing the configuration. The missed services are :
/sap/bc/webdynpro/sap/saml2
/sap/public/mysssocnt
/sap/bc/srt/pm
In SICF tcode, when I see the above services, Iam unable to find out.
Can anybody clear me that, for these services, we need to install certain patches or any other alternative is there to get these services.
Thanks & Regards,
Kris

Hi Holger,
Thanks for your reply.
As mentioned in chapter 3.3.2 Configure the Service Provider for StarterServices Endpoints for duet Enterprise.
We need to perform some steps on the SAP system on T.code: soamanager.
while performing step number 9 on chapter 3.3.2 we are unable to see
Application and Scenario Communication tab (or the Service Administration
tab) and we are stuck here.
Moreover,
while manually adding services describe in 3.3.2 chapter i am getting
error "0 entities found!"
Procedure iam following is desribed below:
1. Go to T.code: soamanager.
2. Click on Business Administration.
3. click on Mass configuration.
4. click Create
5. In the Configuration Scenario section fill in the following:
a. Enter the configuration scenario name, for example, StarterServices.
b. Enter a description for the scenario, for example, Services used by
Starter Services.
6. Select the Provider tab and click Add.
7. Select the Search tab.
a. In the Search by field, select Service.
b. In the Search Pattern field, enter the name of a starter service
required service, for example CustomerERPByIDQueryResponse_In.
c. In the Field field, select Both Names.
d. Click GO.
e. Click Add to Worklist.
when i click on "go" as mentioned in step number 7 above i am getting
error "0 entities found!".
So we are assuming it might be due to the services missing in SAP(backend system).
Please suggest on it.
Thanks
Kris

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

ICF SERVICE NODE FOR THE APPLICATION DOES NOT EXIST.

Hi All:
i am getting the following error when trying to execute my applications in abap webdynpro.
The following error text was processed in the system BIS : WebDynpro Exception: ICF service node for application does not exist
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
can anybody help me out.
relevant answers will be awarded...
Regards:
Arun

Hi,
see the information on ICF service nodes <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">here</a> and also take a look at SAP notes 517484 and 1009930 and 1008689
Regards, Heidi
For information on creating services (if they are not created automatically), see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm">here</a>
Message was edited by:
Heidi von Geisau

Ramifications of assigning a wildcard certificate to the SMTP service (needed for Exchange 2010 Hybrid Configuration - Office 365)

Hello All:
I am receiving an error when I run the Manage Hybrid Configuration wizard - ERROR:Updating hybrid configuration failed with error 'Subtask NeedsConfiguration execution failed: Configure Recipient Settings. I have opened a SR, but figured I'd try the forums,
too. I have a wildcard certificate from GoDaddy (MS says they support wildcards from GoDaddy) & that cert has only the IIS service applied to it on the CAS. I've read in the Exchange Server Deployment Assistant that it should have the SMTP & IIS services
assigned to it, but my question is - SMTP on the CAS (separate server) or on the Mailbox/Hub Transport (separate server)? And what are the ramifications of assigning the SMTP service to, let's say, the CAS? We have had multiple issues every time the servers
get updated/changed; I do not want to disrupt services further, as the Manage Hybrid Configuration will be done during business hours.
If anyone can provide any assistance/clarification, it would be most appreciated.
Thank you.

Hi,
We can enable a Wildcard certificate with SMTP service for Exchange Hybird Deployment. The SMTP service can be assigned to multiple certificates. For some Exchange services such as OWA, Ecp, ActiveSync, Autodiscover service, OOF, it is used with Exchange
certificate with IIS service. And there is usually only one certificate can be assigned with IIS service.
Please just make sure your Wildcard certificate can contain all namespaces which are used for all internal URL and External URL configuration in Exchange services. About how to import an existing wildcard certificate on the Exchange 2010 Hybird servers,
please refer to the Import & Enable Third Party Certificate on Hybrid Servers
part in the following article:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/configuring-exchange-hybrid-deployment-migrating-to-office-365-exchange-online-part9.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

Configuring Virus Scan Service for KM in EP7.0 18

Dear gurus,
I did virus scan configurations in ep7.0 18 but I couldn't do the configurations in KM.
Is there a blog or document? All the blogs and documents are about Configuring Virus Scan Service for KM in EP 6.0.
Best regards
Tolga

Hi Tolga,
The configuration should be much the same, the only difference is that since SP13 you don't need to create profiles or groups any more, this is done automatically, you just need to activate two profiles in the AS Java. See the following link for more information:
http://help.sap.com/saphelp_nw70/helpdata/EN/b8/f5af401efd8f2ae10000000a155106/frameset.htm
Regards,
Lorcan.

Configuring APS for 10G ITU w/ Splitter

Does anyone have experience on configuring APS for 10G ITU card with Splitter so that in a case of signal degrade it will switchover to the protection path? The default switchover mechanism is based on LOL (Loss-Of-Light) but it wont help if signal degrades for example to -25dB. All experiences and best practices are wellcome.

I know the protection schemes (client, splitter, Y-cable etc.) but my question is how to configure splitter protection so that in a case of signal degrease it will do switchover to the protection path.
See below an output from ONS15530:
ONS15530_1>sh aps
AR : APS Role, Wk: Working, Pr: Protection
AS : APS State, Ac: Active, St: Standby, NA: Not Applicable
IS : Interface State, Up: Up, Dn: Down
MPL: Minimum Protection Level, SD: Signal Degrade, SF: Signal Failure
LOX: Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync,
LOL: Loss of Light, - not currently protected
Interface AR AS IS MPL Redundant Intf Group Name
~~~~~~~~~~~~~~~~~~~~~ ~~ ~~ ~~ ~~~ ~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
Wavepatch1/0/0 Wk Ac Up LOX Wavepatch1/0/1 CH1
Wavepatch1/0/1 Pr St Up - Wavepatch1/0/0 CH1
So APS will switch to the protection path only in a case of Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync. So it WONT do the failover if RX signal level degreases below the minimum RX level (-23dB for 10G ITU card), because there is still light coming (not LOL case). So how do I protect my system against this kind of signal degreade?
rgds,
Jp

EPM V11.1.2.1 Perform 1st-time configuration of Shared Services database

Hello,
I installed EPM v11.1.2.1 but I could not configurate.
On EPM configurator step Perform 1st-time configuration of Shared Services database option was disabled.
I try to change vpd.properties file's name; but it did not work.
Do you give me any suggestions?
Thank you.
ankist

Have you had any previous versions on the machine, what OS is it.
Cheers
John
http://john-goodwin.blogspot.com/

Configuration of Service procurement for Extend Classic

Hi SRM Gurus,
Can anyone send me the configuration documents for configuration of service procurement for extend classic scenario.
I have referred to SRM Enterprise Buyer 5.0 Configuration (SRM 210) and SAP Library. But both of these doesn't talk about the configuration steps involved in that.
Any documents, leads and help would be highly appreciated. My email id is [email protected]
Thanks
Ramgopal Verma

Hi,
In plant Y, you have to maintain Spl.procurement key in material master. In MRP 2 view assign External procurement & spl.procurement kery 40.
In the plant X, create material master as inhouse production in MRP 2 view.
Have to maintain BOM & Routing in plant X.
Configure in SPRO> MRP> Planning> Define spl.procurement key.
In this assign Issue plant as X.
Run MRP for plant Y. System create Stock transport req in plant Y.
Convert this req into stock transport order.
In plant X, dependent req will create.
Use MB1B mvt type 301for single level stock transport.
For multi level stock transport use MB1B 303 - issue & 305 -receive mvt.
Regards,
Dharma

What Web Services application I can make for our school

I am now making my final thesis project which named "Web Services", the objective of our project is to learn about Web Services and then make an application for our school.
Though we have learnt lots of theories about Web Services, except deploye some simple services on certain server for instance using Axis, we still have no idea about what Web Services can do and how to implement it in a real case.
Our school has several kinds of students(Electronics, Bio, EM,and etc.), what the school aready has are: An existing database contains all the imformation of students and interrelated information of courses, professors. And there outside is an Extranet, forming of jsp pages providing different information and functions to different users, for instance an ICT student, after sign in with his user name and password , can check his personal course schedule, query his reasult sheet, read emails, join in some discussions of activities and courses and etc.
So is there anyone can give me some tips on what application we can do for our school? And If the infomation I mentioned above is not enough, please do not hesitate to tell me,
It's urgent since we have to finish the whole thesis project before June!
Thanks in advance!
Wang Xu
[email protected]

urgent！！

Configuring Application Porvider Services (APS) for SmartView V11 - Linux

Similar Messages

Maybe you are looking for