Configuring directory path for fileappender in log4j.properties

I want to write log data to a file where the directory path of the file should be picked from a unix environmental variable. How can you configure this in log4j.properties?
log4j.rootLogger=INFO, A
# A is set to be a FileAppender.
log4j.appender.A=org.apache.log4j.FileAppender
# A uses PatternLayout.
log4j.appender.A.File=$UNIX_ENV_VARIABLE/A.log <= This is what I want. The dir path should be picked from some env path
log4j.appender.A.layout=org.apache.log4j.PatternLayout
log4j.appender.A.layout.ConversionPattern=%d{HH:mm:ss,SSS} [%t] %-5p %c %x - %m%n
Or if this should be done in code, then please guide me on that.
Thanks in advance

Hi,
i am facing one problem,
where today's log and yesterday log has log statements for today with same date.. but different data. any one pls help.
this is the properties i configured
# Logger for A messages
log4j.logger.A=debug, A_R1
log4j.appender.A_R1=org.apache.log4j.DailyRollingFileAppender
log4j.appender.A_R1.File=/var/opt/wmeaidata/app_data/log4j/logs/eai_a.log
log4j.appender.A_R1.MaxFileSize = 5MB
log4j.appender.A_R1.MaxBackupIndex = 3
log4j.appender.A_R1.layout=org.apache.log4j.PatternLayout
log4j.appender.A_R1.layout.ConversionPattern=%d{MMM dd, yyyy hh:mm:ss a}|%c-%X{host}|%m%n
Thanks
venkat

Similar Messages

Set default directory/path for SaveAs Dialog using WPG_DOCLOAD

Hi, im trying to set the default directory/path for the SaveAs Dialog called by wpg_docload.download_file.
I'm not able to find where I can specify the default path.
Is it something like "htp.p('Content-Disposition: attachment; path=:PX_OUTPUT_DIR" ?
Thx for your help !
Here's a part of my code
owa_util.mime_header( NVL(mime,'application/octet'), FALSE );
htp.p('Content-length: ' || length);
htp.p('Content-Disposition: attachment; filename="'||substr(fileName,INSTR(fileName,'/')+1)|| '"');
owa_util.http_header_close;
wpg_docload.download_file( lobLoc );
/*********************/

I don't believe you're allowed to set the directory path in the Content-Disposition (or any other) header. More accurately, you can set path in the filename, but browsers don't pay any attention to that, they only look at only the terminal filename.
<p>According to RFC 2183, browsers are supposed to ignore any path information sent with the filename. Even though it's dated 1997, I believe this RFC is still in effect.
<p>This was done as a security precaution against malicious web apps that might try to download into a system directory or other dangerous place. Also, browsers (usually) allow users to specify their own default download directories. Further, even if you could specify the path, you'd have to do it for any and all filesystems (Linux, Mac HFS, Mac OSX, Windows, etc etc).

Dynamic Configuration - Set Directory Path for File Receiver Adapter

Hi Experts,
I have a question regarding the dynamic configuration for the file adapter. Is it possible to set a directory path without a message mapping for the file receiver adapter? the problem is that I want to import a pdf document. this pdf document I want to store in a dynamic directory (depending on the filename). so I have to read the filename out of the dynamic configuration and generate (depending on the filename) a directory for this file. Is that possible without a message mapping? I cannot make a message mapping because the file has the pdf format and should not get changed.
best regards
Christopher Kühn

Hi Gaurav,
I use the ASMA (respectively the filename) for the sender adapter. After the pdf was imported into XI this filename is in the ASMA.
But what then??? How can I get this filename with the help of the variable substitution? and if I have this filename I have to change this filename a bit to generate the name / path of the directory.
Please explain it to me detailled
Thanks and regards
christopher

Add TFTP directory path for controller backups

Hello
We are trying to get controller backups sent to a remote TFTP server via WCS.
We have configured the TFTP server IP in WCS via the 'Configure' > 'TFTP Server' section.
We then schedule the TFTP via 'Administration' > 'Background Tasks' > 'Controller Configuration Backup', choosing the TFTP server we have previously configured.
However, we are being asked to send the files to a particular sub-directory of the TFTP server rather than the root folder, does anybody know if it is possible to define the file path for these TFTP's via WCS?
thank you in advance
regards
Bryn

If you want to dump the files to the root directory of the TFTP server just put ./ in for the path.

How can I set a new directory path for iPhoto lib & photos?

I'd like to use an external drive to house all the iPhoto related files including the Library, data files and photos. I don't see an iPhoto Preference to set a different path. Is there another method to accomplish this? Should I edit the directory path as listed in the AlbumData.xml file?
Thanks!

Hi Nova,
copy the ENTIRE iPhoto Library folder (in your Pictures folder) to the external.
Launch iPhoto with the Option key held down.
At the prompt choose to open another library
Navigate to the library on the external and choose it.
Once it opens on the external this is the library iPhoto will use.
You can then delete the one on the internal or save it as backup or burn it for backup.

Invalid directory path for windows...?

DECLARE
v_file UTL_FILE.FILE_TYPE;
v_dir VARCHAR2(250);
v_filename VARCHAR2(50);
BEGIN
v_dir := 'D:/LANDMARK/datamigration';
v_filename := 'pc_datamigration_out';
v_file := UTL_FILE.FOPEN(v_dir, v_filename, 'w');
UTL_FILE.PUT_LINE(v_file, 'Test file for usage of UTL_FILE package');
UTL_FILE.FCLOSE(v_file);
exception
when others then
dbms_output.put_line('Err utl file..!'||sqlerrm);
END;
I am getting eror "Err utl file..!ORA-29280: invalid directory path"
kindly help me to fix problem.I am working on windows machine not on unix.
rgds,
pc

The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.
p.s. as already mentioned by others, this directory must be on your Oracle database server. You can only access client directories if the server itself has a mapping to the client machine itself. Don't expect to provide a path and for the process to access the local client machine of whoever uses it.
Edited by: BluShadow on 24-Nov-2010 12:24

Listing directory path for all Itunes songs

I have songs in my Itunes that I've managed to put in a number of different places on my computer, as well as on a second hard external hard drive. I want to list the inventory of all my songs, and be able to see what the path is for each, which I know is in "Info" - but I don't want to have to go through song by song. Is there a way to add that date to a print out or some other easy tool so I can find the ones that aren't in either of my primary, default Itunes folders (C: and my external drive)

I'm trying to find the paths for over 3000 songs on my C drive to confirm that they've been copied to my external drive. First of all, I'm not finding a current .itl or .xml file - they're dated 7/29/08 and I've updated Itunes with new content numerous times since then. When I open the .xml file that's in the directory, I'm getting pages that don't clearly show me or allow me to sort the data.

Configuring the PATH for jdk1.3.1_01 in WindowsXP

I need help in configuring the autoexec.bat file for jdk1.3.1_01 . I am running on WindowsXP. (I used to have win 98 on my old pc that crashed and had jdk1.2.1 and working just fine) Now I have a new pc and have tried the following:
windir=C:\WINDOWS
SET winbootdir=C:\WINDOWS
SET COMSPEC=C:\WINDOWS\COMMAND.COM
SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\jdk1.3.1_01\bin
SET PROMPT=$p$g
SET TEMP=C:\WINDOWS\TEMP
SET TMP=C:\WINDOWS\TEMP
When I type in C:\path ...it does not show the path I entered. I have no clue what I am doing and the instructions I printed out from sun just do not help me out at all. I really need to get this working so I can continue learning. If anyone can please straighten me out on this I would really appreciate it. Feel free to email me at [email protected]
Thanks Reba

Your PATH appears to be correct. However, to verify your PATH you should be able to type the following:
c:\>echo %PATH%
This will display your PATH setting on the console. In addition, you can verify that your PATH setting is correct by typing:
c:\>java -version
If your path is set correctly, you should see something like:
java version "1.3.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C)
Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
If, instead, you get something like:
"Bad command or file name"
Then your PATH is not configured correctly.
Hope this helps.

Exploded Directory path for BPM Worklist Applications

Hi All,
If anybody could tell me the location of Exploded Directory where all the existing worklist apps related jsfs are available it would be a great help for me to do some sort of Customization to the out of box Oracle 11g BPM worklist app.
Durga.

Hi Durga
1. Assuming you have a standard SOA/BPM Domain with one AdminServer and one SOA_SERVER1, here is the location where most of the modules are exploded and stored: /yourWeblogicSOAHome/user_projects/domains/yourSOABPMDomain1/servers/soa_server1/tmp. Under this tmp folder, you will see bunch of sub-folders and they have some more sub-folders. It is really tedious if you really want to cusotmize and modify files located at this location. I would strongly NOT recommend this. The files in tmp folders are not gauranteed. Afterall they are temporary file. And most of the times, when I restart my SOA SERVER, I always delete cache, tmp and logs folders. So you will loose all changes and you had to take back up of your changes and restore them.
2. If you really want customizations like increase timeout say for example, you should use weblogic console, deployments, that war/ear and modify and store the changes in custom plan.xml file.
3. If you really want to customize some jsff stuff, figure out which EAR/WAR is having that file. You can use general perception. Then directly go to the actual EAR and extract and get JAR/WAR. Then extract contenst of WAR and then modify jsff etc. Put jsff with same path back in war and put war back in EAR. Most of the soa modules are located at /yourWeblogicHome/Oracle_SOA1/soa/modules. The most important modules that has core files are like bpm-services which are at: /yourWeblogicHome/Oracle_SOA1/soa/modules/oracle.soa.workflow_11.1.1 and actual data controls/ui stuff in bpm-workflow-datacontrol.jar file in the same above module. ALWAYS take back up of original EAR/WAR/JAR before you extract and make changes.
4. Last option is you create your own Custom Worklist app which is not very simple (I would say), unless you want very basic minimum stuff.
Thanks
Ravi Jegga

Domain directory path for Monitor Agent on Linux?

If I'm installing Monitor (agent) on an OES2 Linux server, I am prompted for the path to a domain directory
But this server is not going to have any domains on it.
the docs are poor at best on this section (other than to follow the prompts)
I am assuming (since there's a "file browser" button) that if there's no domain on this server, that I cannot use a UNC path and must use a mount point to a server that has a domain?
And if the other server is on NSS, I will need ncpmount?

Originally Posted by dzanre
kjhurni wrote:
> Only because if the GWIA is down, it'll alert nobody (haha) because well,
> the GWIA is down.
Oh - but you don't want to use your GWIA for alerts. Monitor has its own
SMTP mailer, so unless you HAVE to go through a relay host, monitor can
alert you regardless of whether the system is down. I send my alerts to the
smtp address of my phone.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
Moving GroupWise
Even better! Yes, we can send to the relay host and let it go wherever.
I was just thinking that let's say a regional POA/MTA is having problems, that the delivery address for the notification should be an " internal" GW account.
Obviously though, if the GWIA is having an issue we'd not know about it because it would try to deliver to the internal GW address and that has to go through the GWIA.
Although with diff. groups I will see if I can put the GWIA/MTA into a special group that gets notified to like the blackberry or something (like a text message).

How do you set/find the directory path for /i/

Searching the forum, I found one note that indicated this was set in MARVEL.CONF (since I'm running 2.0, presumably DADS.CONF). However, looking at the DADS file for my install, I don't see anything resembling a directory mapping. What would the syntax be for this?

In a default installation, you are supposed to add the mapping to httpd.conf
But it could be in any file Apache includes.
Seach for a line like
Alias /i/ "/opt/oracle/product/10.1.0/Apache/Apache/images/"

Creating a DB_ENV environment/setting a directory path for db's in Windows

I have a small visual studio 2005 c++ program where I am trying to specify which directory to open my database from. I use db_env_create to create my environment and then I try to use DB_ENV->set_data_dir to set my path but it keeps returning a non 0 number and not setting my path. Did I miss any steps?
Thanks

Here is an example that I tried and it is crashing at the set_cachesize.
I don't set the cachesize it then crashes at the dbenv->open. Any idea why I am crashing? I am using Berkeley version 4.6.21 with Windows xp and visual studio 2005.
Thanks.
int ret;
if ((ret = db_env_create(&dbenv, 0)) != 0)
     cout <<"Error Creating Database " << endl;
     return (1);
if ((ret = dbenv->set_cachesize(dbenv, 0, 64 * 1024, 0)) != 0)
        cout << "Cache size error " << endl;
     dbenv->close(dbenv, 0);
     return (1);
(void)dbenv->set_data_dir(dbenv, "C:\Documents and Settings");
if ((ret = dbenv->open(dbenv, "C:\Documents and Settings\champ\My Documents\Visual
     Studio 2005\Projects",DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG |
     DB_INIT_MPOOL | DB_INIT_TXN,0)) != 0)
       cout << "Cache size error " << endl;
       dbenv->close(dbenv, 0);
       return (1);
}

How to Configure logical path and how to retrieve physical path for an IDOC

Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit Rungta

Using Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
      FORMAT(3),
      FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
     EXPORTING
          LOGICAL_FILENAME        = 'MYTEMP'
          OPERATING_SYSTEM        = SY-OPSYS
          PARAMETER_1             = '01'
     IMPORTING
          EMERGENCY_FLAG          = FLAG
          FILE_FORMAT             = FORMAT
          FILE_NAME               = FNAME
     EXCEPTIONS
          FILE_NOT_FOUND          = 1
          OTHERS                  = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag      :', FLAG,
         / 'Format    :', FORMAT,
         / 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System.

Change Directory Path using Dynamic Configuration

Hi,
We have a requirement where the directory path for placing the files is different across our different environments. Ex: Development Environment has a different path than the Quality Enviornmnet. Also the full path is depending on fileds within the message.
I want to use Dynamic Configuration to create the Directory path. But in order to capture the full requirement I need to know wheich environment I am within the User Defined Function.
Can someone provide me the java class and function that I can use in my UDF to read the environment I am in.
( Essentially I want to read Sy-SYSID in ABAP...using Java. )
Regards,
Arunava

Hi Arunva,
>>Essentially I want to read Sy-SYSID in ABAP...using Java.
It might not be possible to read system id in java, but you can read the sender or receiver service(SENDER_SERVICE or RECEIVER_SERVICE) and based on it can decide the diretory in DynamicConfiguration.
If you have a sender or receiver SAP sysem then better to read its name because this business systm ill haeunique name aross different environment. Check this thread too
User-defined function: RFC call
Regards
Suraj

File Adapter Directory Path

Hi,
I have hot coded the directory path.
I want to read the input directory path for fileadapter from a file(i will have a configuration file where i will set values for parameters).
Regards
Vishnu

Thanks Ashish, it is helpful.
Just one more question, I am not sure what value do I add from making physical to logical. Let's say if I have file polling read operation (not sync read), then if I configure physical path it will be hardcoded in jca wsdl file, if I configure logical it is hard coded in bpel.xml file.
Unlike other preferences I am not able to update my logical directory in bpel.xml at run time in descripter tab. So if my input directory changes for some reason, I have to replace it (via ANT) and redeploy the process no matter what.
Let me know if I understand it correctly.
Vishnu,
Please clarify which operation you are using, if you are using sync read or write, you can read your directory and file name from parameter file and pass it to adapter for reading that file. Adapter will give you content and also the name file/directory as header variable.
If you are using polling operation, "after reading" the file adapter will provide file name and directory in header. But if you want pass the name of directory to adapter for reading the file, then I have asked similar question to Ashish.
Regards,
Chintan

Configuring directory path for fileappender in log4j.properties

Similar Messages

Maybe you are looking for