Configuring emails for database backup

I have the query as to where to configure the emails for backup completion in Oracle 11g. The detailed steps would help.
I hope my question is clear as to how to configure the email notification for backup completion in Oracle 11g.
Please revert with the reply to my query.
Regards

972145 wrote:
I have the query as to where to configure the emails for backup completion in Oracle 11g. The detailed steps would help.
I hope my question is clear as to how to configure the email notification for backup completion in Oracle 11g.
Please revert with the reply to my query.
RegardsThere is about emailing that is specific to backups. It is simply an OS utility. Google 'sendmail' and 'mailx'. Have your backup job (or any other job) create a log file, then use the OS mail utility to email that log file.

Similar Messages

  • Very first step in configuring RMAN for a Backup

    DB version:10gR2
    I am a DBA supporting applications development and i am not familiar with RMAN. This weekend we are going to Patch 10.2.0.1.0 to 10.2.0.3.0. Before that i am going to take a backup of the entire Database containing around 57 schemas(total of around 600gb).
    We don't have Tape drives. I am going to backup this up on three filesystems in the same machine. This instance is not running on ASM. What is the first step i should be doing in configuring RMAN for a backup?
    Edited by: user10583227 on Jan 27, 2009 4:50 AM

    Be careful, three filesystems doesn't necessarily mean the use of three channels. Could be more...could be less.
    Are you in a position to shutdown the database? If not, you'll also want to backup the archivelogs with BACKUP DATABASE PLUS ARCHIVELOG. You may also consider creating a Guaranteed Restore Point which would allow you to rollback your database in minutes if the upgrade fails.

  • Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).

    Hello , I think the below event alert 4113 is very common and is due to that only one database copy is present in DAG but is there any way we can stop this alert for the
    specific database.  
    The message tells that there is only one copy of the database - create another copy and the warning message will go away but
    we do not want to create another copy. So is there any way we can stop this event getting generated.
    Database redundancy health check failed.
    Database copy: DB-1
    Redundancy count: 1
    Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).
    Name                 Status RealCopyQueu InspectorQue  ReplayQueue      CIState
                                           e          
    ue                          
    DB-1\       Mounted            0            0            0     
    Healthy
    MAILSRV2
    ===============
     Full Status
    ===============
    Identity                         : DB-1\MAILSRV2
    Name                             : DB-1\MAILSRV2
    DatabaseName                     : DB-1
    Status                           : Mounted
    MailboxServer                    : MAILSRV2
    ActiveDatabaseCopy               : MAILSRV2
    ActivationSuspended              : False
    ActionInitiator                  : Unknown
    ErrorMessage                     :
    ErrorEventId                     :
    ExtendedErrorInfo                :
    SuspendComment                   :
    SinglePageRestore                : 0
    ContentIndexState                : Healthy
    ContentIndexErrorMessage         :
    CopyQueueLength                  : 0
    ReplayQueueLength                : 0
    LatestAvailableLogTime           :
    LastCopyNotificationedLogTime    :
    LastCopiedLogTime                :
    LastInspectedLogTime             :
    LastReplayedLogTime              :
    LastLogGenerated                 : 0
    LastLogCopyNotified              : 0
    LastLogCopied                    : 0
    LastLogInspected                 : 0
    LastLogReplayed                  : 0
    LogsReplayedSinceInstanceStart   : 0
    LogsCopiedSinceInstanceStart     : 0
    LatestFullBackupTime             :
    LatestIncrementalBackupTime      :
    LatestDifferentialBackupTime     :
    LatestCopyBackupTime             :
    SnapshotBackup                   :
    SnapshotLatestFullBackup         :
    SnapshotLatestIncrementalBackup  :
    SnapshotLatestDifferentialBackup :
    SnapshotLatestCopyBackup         :
    LogReplayQueueIncreasing         : False
    LogCopyQueueIncreasing           : False
    OutstandingDumpsterRequests      : {}
    OutgoingConnections              :
    IncomingLogCopyingNetwork        :
    SeedingNetwork                   :
    ActiveCopy                       : True
    Thanks

    That regex looks odd to me.  I assume you have databases with names like "Mailbox Database <ten digit number>" (standard Exchange default name, in other words), "ABC-DB" and "HOME-DB".  If this is the case, wouldn't
    you want "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"?  THis works if I run it from a prompt:
    [PS] C:\Scripts>"Mailbox Database 0123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    True
    [PS] C:\Scripts>"Mailbox Database 123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    False
    [PS] C:\Scripts>"Mailbox Database 12345678910" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    False
    [PS] C:\Scripts>"HOME-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    True
    [PS] C:\Scripts>"ABC-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    True
    [PS] C:\Scripts>"ABCD-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    False
    [PS] C:\Scripts>"HOM-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
    False
    I find it's easiest to test RegEx's from the prompt this way.  If the above isn't your goal, let us know, and we'll see if we can come up with something better.

  • TCODE FOR DATABASE BACKUP

    Hi All,
    Please let me know the complete procedure for to take backup of all database tables in request form.
    Mean What is tcode for taking backup of all database in 3  requests?
    Thanks In Advance.

    Hi Naveen.
    I would like to suggest,
    The Transaction code for backups is DB13.
    Generaly, the transactions related to DB backup management start with DB letters.
    I would like to suggest a few references,
    [SAP HELP - Standard References for Database backup by BR Tools|http://help.sap.com/saphelp_47x200/helpdata/en/0c/cd271365debc42bef96ac7fd907787/content.htm]
    [SDN - PDF - Standard Reference for Database Backup Utility|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d8fc1f3a-0d01-0010-1c84-ac8bee9f7c9b]
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • Configuring emails for E72

    Like many others here I can not configure my emails correctly I previousley had e63 and it worked a dream I've upgraded to the e72 and wish I hadn't bothered I use my phone for business and need access to emails having configured they all arrived and I was impressed but when I went to reply or send it only for it to be cue up in the out box and get sent.
    the settings are correct.
    Incoming: pop.daily.co.uk (for both POP3 and IMAP)
    Outgoing: mail.daily.co.uk
    and I configured the ports to first default, then 25, then 587 as advised but still they will not send.
    Can anyone help before I go back to my old phone and sell this one on ebay.

    972145 wrote:
    I have the query as to where to configure the emails for backup completion in Oracle 11g. The detailed steps would help.
    I hope my question is clear as to how to configure the email notification for backup completion in Oracle 11g.
    Please revert with the reply to my query.
    RegardsThere is about emailing that is specific to backups. It is simply an OS utility. Google 'sendmail' and 'mailx'. Have your backup job (or any other job) create a log file, then use the OS mail utility to email that log file.

  • Privileges required for database backup with RMAN

    Hello,
    We have 10g R2 on Solaris box. We use RMAN for backup and use the SYS account on the database to connect and take the backup.
    Are there specific privileges that are required to take the database backup , so that I do not use the SYS account or the syspassword in the RMAN script.
    I want to create an account and give only the privileges required to take the database backup and recover .
    Thanks

    I think RMAN needs the SYSDBA privilege, so you won't gain much by switching from SYS to another user.
    You don't need to store sys/password in a script. You can just :-
    rman target / catalog xxx/yyy@catalog

  • Cannot configure email for an Office365 Sharepoint list

    Hi,
    We are using an Office365 deployment of Project Online and SharePoint sites. There is a lot of information available on how to configure SharePoint lists to receive emails however the only option I have under List Settings | Communications is for RSS Feeds.
    Can anyone tell me if this feature available in Office365 SharePoint? 
    Regards,
    Conrad 

    Hi Conrad,
    Please refer to the threads below for the email settings in Office 365 SharePoint sites:
    http://community.office365.com/en-us/f/154/t/809.aspx
    QUOTE:
    Email alerts and workflow notifications can be sent to SharePoint users when documents or other items have been changed or added to a site. SharePoint Online does not at this time support to inbound email for document libraries, discussion boards, calendars,
    and lists.
    If you would like to make SharePoint sites to receive emails, I'd suggest you conside sitemailbox in SharePoint site:
    http://office.microsoft.com/en-in/office365-suite-help/prepare-for-using-site-mailboxes-in-office-365-HA103834109.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Hardware configuration recommendations for database and VM work

    I'm looking for advice on system configuration for a computer to use at work for database, VM, and number-crunching applications. The database work will involve complex SQL queries against MySQL databases in the 5–50 GB range. I'll be using the computer for a variety of projects, and I'd like to configure and run Linux VMs on a per-project basis. The number-crunching will involve engineering applications, most of which will likely run in Linux. The database tables might be accessed from OS X or a Linux VM; I'm not sure at this point.
    Advice or recommended reading on internal RAID, SAS, Fibre Channel, and the like would be appreciated. Would it make sense to have a large SATA boot drive that stores the VM and a second high-throughput drive array for the database tables? If so, what are some good options for configuring the latter? Staying in the $5k–$7k range would be nice.
    Thanks,
    Andreas

    FileMaker is the best option if you want a good GUI front end. It's not free like MySQL but the price is worth it.

  • Industry standard for database backup time

    We have many databases in our company for which our Database backups are forced to be run by System Administrators at 3PM since their tape backups are starting from 4PM.
    As a DBA I am suggesting to run all the tape backups late night so that I can schedule my Database bacukps at atleast 10PM daily.
    What is the industry standard for running daily database backups time? Can somebody please provide some links for such standards from a authorising body like Gartner, etc?
    Thanks in advance.

    There is no such standard. To have one would be simply implausible.
    It would depend massively on your infrastructure and where you take backups to. If it's tape, how fast is your networking to the tape, how fast is your tape drive. If it's disk, how fast is the disk you're backing it up to. For both, it depends on the size of the database, what type of backup you're taking and how loaded your database is, how fast your servers are. There are too many variables.
    Only you will know how fast your backups take and whether they're taking longer than they should (based on your observations on how long they usually take).

  • Configuring EMail in Database Cloud Service(Schema)

    Hi
    I am trying to use APEX_MAIL for emailing. Before using this, Where do I configure SMTP host , port ...etc in my Database Cloud Service.??
    I tried log in to APEX console of my Database, Administration tab but I didn't find any place to setup this information.
    I am using DB cloud Service associated with JCS-SAAS Extension (Trial version)
    Thanks
    Samrajyam

    I don't think you need or even can change the configuration. You should be able to send and email with:
    BEGIN
        l_id := APEX_MAIL.SEND(
            p_to        => '[email protected]',
            p_from      => '[email protected]',
            p_subj      => 'APEX_MAIL',
            p_body      => 'Some content',
            p_body_html => '<b>Some content</b>');
    END;
    For details of APEX_MAIL refer to the documentation.
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Configuring EM for database

    Hi,
    I have upgraded a 9.2.0.5 database to a 10.2.0.1 home. The upgrade was successfull. I also changed the listener port number since there was a default listener running on 1521. The new listener is now a namd listener on a different port. I now want to configure the EM agent so that I could use the web browser to keep track of the database.
    I'm using emca as per the instructions given in after upgrading the database. But everything I have tried come back with the help menu displayed and I do not know how to proceed. Any help would be greatly appreciated.
    I also tried the emctl but I get the message EM configuration issues: hostname_SID directory does not exist. I checked to see and the directory was never created.
    How should I configure the EM?
    Thanks,
    Mamata

    Hi,
    emca command has changed its syntax for Release 2 and now a lot options.
    emca -config dbcontrol db -repos create is the basic command , it creates some directories, populates configuration files with informations of your machine and the database you want to monitor, at the end it creates the repository owner (SYSMAN) and all necessary objects. If you create (not update) a new 10g database, normally this command is executed as one of the last steps by DBCA (if you chose you want to use dbconsole).
    Regards Werner

  • How to Configure Email for a Specific job when its Fails

    Hi
    We have So many jobs running in our HR system and BW systems but with no proper Monitoring Configuration. We have Solution manager 7.0 with EHP latest version with CCMS configured. How to setup the email in Solution Manager using CCMS when Job failed?
    Is there any standard way of doing it from HR system and BW system other than using solution manager? so that we can use it for Temporary solution.
    Thank you for you support
    Regards
    Bhaskar

    Hello Bhaskar,
    I recommend to use SAP CPS by Redwood to schedule you BW and of course also your HR jobs.
    Please check out the following document:
    SAP CPS by Redwood - Increasing the Value of SAP NetWeaver Business Intelligence
    Scheduling
    The monitoring capabilities fo SAP CPS are described in the documentation:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0a/1a5678b72c418d96242330b96473c6/frameset.htm
    You can use SAP CPS together with SAP Solution Manager free of charge (and even the OEM license for SAP CPS is free of charge). This way you can also combine SAP CPS and Business Process Monitoring in SAP Solution Manager.
    /people/martin.lauer/blog/2009/05/11/process-scheduling-adapter-for-sap-solution-manager-for-everybody
    Kind regards,
    Martin
    Job Scheduling Managment  -  http://service.sap.com/jsm
    SAP CPS                               -  Scheduling

  • Howto configure Timeout for database link

    Hi,
    how can I configure the expected timeout for a db link connection?
    My problem is, that I've to get data from a far distance database and the network connection is not very good.
    Sometimes it works pretty good, but often I get a not reachable error. Monitoring the server with ping shows, that the server is always alive, but the roundtrip time is high ( >200 ms).
    System: Oracle 9.2.0.5
    Linux (RedHat)
    Thanks for help
    Stephan

    Well since db links just use the underlying SQL*Net configuration, what you're actually looking for is timeout settings for SQL*Net, there are two:
    In the listener.ora file on the server:
    INBOUND_CONNECT_TIMEOUT_<listener_name> = n seconds
    Determines the limit the database listener will wait for a client connection to complete after the connection is made.
    In the sqlnet.ora file on the server:
    SQLNET.EXPIRE_TIME = n minutes
    Determines the limit for the frequency of active connection verification of a client connection.
    If the problem is you're getting disconnected because of network timeouts, it could be here or something in your LAN network settings.

  • Configure email for iCloud

    Hi
    How do I configure my Outlook email account with iCloud?  I would like this account to sync with all my devices eg. iPHone and iPadI assume that it will work with iCloud, is that correct?  The reason I say this is I tried syncing using Yahoo account but it doesn't work.
    I have an iCloud account already but that is separate account.  Could you please explain and help me configure the Outlook account?  I not that technical in this area.  I have setup the Outlook account in Mail.
    Thank you in advance.

    Mafa_K wrote:
    Hi Csound, these are the settings I'm using;
    Now, strangely, I can send from the icloud account, but every time it sends and receives it appears to function correctly, but is throwing up the error message each time, see below;
    @'Shoot..' - I agree the instructions DO seem straight forward and as far as I can see I am complying. I am also woking with mail, which being Apple's own is syncing correctly with my two mail accounts, I wanted to get Outlook working fully functionally so that I could decide which worked best for me. Also, Outlook syncs nicely with my icloud account online, enabling exchange of contacts etc between my MBP and PC, hence the reason for wanting to keep it.
    As ever, grateful for ideas as to what Outlook is seemingly objecting to - thanks (btw I am abroad at the moment and internet access is 'sketchy').
    Settings appear correct ......
    Outlook is not compatible with iCloud services, it is not "syncing"online (to check put a new event or  new contact in iCloud, do it on the website, you will not see it in Outlook)

  • OAAM: Configuring Email for Challenge questions

    Hi,
    Once user registers the challenge questions in OAAM, is it possible to send an email to the user confirming the same out of the box? if not, is there any recommended procedure for it.
    We are using OAAM 11.1.1.5g
    Thanks

    19-Nov-2008 02:56 PM
    r3fl3x wrote:
    Good afternoon Nokia gurus (hopefully)
    A couple of questions on configuring an E71 to connect to an internal Exchange server:
    1. Will we need our ISP to give our Exchange server a public DNS record?
    2. What format do we enter the username and password in the 'Credentials' field? Would this be the same username/password as if we were logging onto our internal network from a PC?
    Any info greatly appreciated.
    Just another question:
    Can we setup phone to connect to our public IP address or does it have to be a DNS name?

Maybe you are looking for