Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Similar Messages

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

Configure maintenance optimizer

Hi,
I am configuring "Configure Maintenance Optimizer" and I get the following error when I use T-code SM_MOPZ.
SAP MOPZ auto-configuration warnings
Message no. IMG_FASTCONF030
What's happen with my SOLMAN system?
Please advise!!
Thanks
Duypm

Hi Duypm,
Its a long process to go.
First, Raise a message with SAP for SAPROUTER certificate if you are planning to use SNC. You need to provide a public IP of your SAPRouter machine in the message.
Second, Send the filled form to SAP
Configure SNC on SAPRouter
Configure OSS1 and SAPOSS rfc destination.
Then configure Maintenance Optimizer.
Cheers.....,
Raghu

Error in Configuring Maintenance Optimizer

Dear Experts,
i am using solman7 with sp12, when i am configuring the RFC to target system i am getting following errors please help me need full
Error creating RFC destination 'SM_KSMCLNT100_BACK' in system 'KHD'
Message no. SMSY_EDIT_LANDSCAPE163
RFC destination SM_KSMCLNT100_BACK generation error
Message no. SMSY_EDIT_LANDSCAPE049
No RFC destination assigned for read access for client 010
Message no. SMSY_EDIT_LANDSCAPE150
Diagnosis
You tried to assign RFC destinations for the system KHD for central system monitoring, but there is no RFC destination for read access for the current client (010).
System Response
The RFC destinations cannot be assigned to the system monitoring.
Procedure
1. Assign an RFC destination for read access to the client (010), or generate an RFC destination for read access for the client.
2. Assign the RFC destination for system monitoring again.
Alternatively, you can use transaction RZ21 to make this assignment
directly (choose Technical Infrastructure -> Display Topology).
Regards
Chandra

Hi,
check the following in RFC
1. Correct solman ip
2. Correct user id/pwd
3. the user profile includes the auth. obj. - S_RFC, S_RFCACL
4. check if proper entries or made in services file (windows)
This will solve your problem.
Feel free to revert back.
--Ragu

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Maintenance Optimizer - ConfigTool.sh - SAP NetWeaver 7.0

Hi Everybody,
First I wanted to set up my MOPZ to do this I have to create a RFC "SAPSLDAPI"
Until there no problem but the next step become a little more problematic.
I have to run the admin tool /usr/sap/SOL/..../j2ee/admin/go.
Unfortunatly I lost the password's J2EE_ADMIN, no problem google is your best friend and then I tried to run the config tool. Oh big surprise
The java class not found: com.sap.offline.OfflineToolStart
What can i do to fix this problem?
Note 1024932 - Maintenance Optimizer: Collective Note
http://help.sap.com/saphelp_nw70/helpdata/en/b7/341241d71cd349e10000000a1550b0/content.htm
Edited by: Hafid CHEBRAOUI on Jan 14, 2009 4:22 PM

It sounds like you have two different issues here.
MOPZ
And Java Stack not starting.
Maintenance optimizer requires that your connection to SAP is in tact first through the saprouter. Do you have all of that in place and is your rfc connections for SAP_OSS and SAPNET_RFC working.
SAPSLDAPI is a connection for the SLD not for the maintenance optimizer.
The link you put below doesn't have anything to do with configuring maintenance optimizer. The ossnote you posted is a collective note for maintenance optimizer and points you to spro to follow the instructions.
Review https://websmp108.sap-ag.de/solman-mopz
Review ossnotes 990534 and 1024932
try running SE38 SM_PREP_MAINTENANCE_OPTIMIZER That may give you some assistance.
Anyone that is going to download using the maintenance optimizer needs to exist in transaction AISUSER
As for the Java stack.
It sounds like your path is not right. Did you update your path environment variables with the installation directory of java? Check that java -version is working from the <sid>adm login.
Lee

SOL MAN - Maintenance Optimizer

Hi all
I configured Maintenance Optimizer in Solution Manager 4.0 but when launching:
dswp -> change management -> support package stack - > maintenance optimizer
select product versrion
select system
-> continue
only procedure 8000000x saved displayed on status bar. No further screen is displayed.
I read note 1032322 and attached file Setup_Maintenance_Optimizer.zip
RFC connection is working well.
Is anything missing in customizing?
Thanks
R

Hi raffaele,
I'm getting problems with setting RFC connection. Can i get your help ?
topic: Maintance optimizer - connection settings
mail: [email protected]
Thanks in advance,
Dimitry Haritonov

Maintenance Optimizer config step-by-step

Hi All,
I am not a SAP Basis Person,I install Solution Manager 4.0.
Now i want to configure it for SAP Service Pack downlod purpose.
Can any one help me in this regard in simplest way to configure Maintenance Optimizer.
Regds
Gyan

Hi Gyan,
when setting up the Maintenance Optimizer, you will have to carry out the basic configuration steps from the Implementation Guide of your Solution Manager system (transaction SPRO):
SAP Solution Manager
- Basic Settings
-- SAP Solution Manager System
Follow the instructions step by step! Another important point from the Implementation Guide can be found under:
SAP Solution Manager
- SAP Solution Manager System
-- Activate Integration with Change Request Management
Furthermore check, if all necessary BC-Sets have been activated (Transaction SCPR20), these BC-Sets are as follows:
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_CHARM_BASICFUNC_001
SOLMAN40_MOPZ_TTYP_SLMO
Make sure to have the table AISUSER maintained as described in the IMG, and check if the destination SAP-OSS (transaction SM59) is having the right settings.
Do not forget to assign a Logical Component to your Solution Landscape in the transaction SMSY.
Please check also note no. 990534.
Further information on the Maintenance Optimizer you will find under http://service.sap.com/solman-mopz
In case of any problems, just ask me again!
Regards
Csaba

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
<i>'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'</i>
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

Maintenance optimizer configuration Steps

Dear All,
I am stuck with Maintenance optimizer configuration.
Can somone provide a usefull link for the same i am using SOLMAN 4.0 with SP 15.
Best of regards,
Gaurav Sood

Hi ,
Here are the steps :-
MAITENANCE OPTIMIZER STEPS
1) Create the system in solution manager (Tr.code-SMSY)
2) For this System to create the rfc destinations.
3) Create the logical component for system.
4) Maintain technical settings of OSS in the transaction code: OSS1
5) In TR code AISUSER maintain the user and OSS id
6) In DSWP transaction codeu2014in settings-global settings have to maintain OSS id and Password.
7)go to tr code DSWPu2014changemanagementu2014support packagesu2014click on maintenance optimizeru2014select the systemu2014continue-confirm files in download basketu2014complete transaction.
Thanks
Abullais

Maintenance Optimizer Configuration

Hello,
I have 2 issues with maintenance Optimizer. I am using Solution Manager Support Package 9. I applied the notes related to it including the 1024932 and 990534.
1. When i press the button Continue in step 1, I sometimes have a runtime error PXA_NO_FREE_SPACE. I read that I have to change the buffer size, but I don't know how i can do it.
2. When I don't have this runtime error, in the step 2 when i press the button Select files, it opens an error page "the page cannot be displayed".
Thanks in advance
François

HI François Maillard
For this you can ask to your BASIS Guy, If this server is test system, Then a simple restart will work in your condition.
Please let me know it it doesnt work,
Regards
Sukhii

Maintenance Optimizer Configuration Guide

Hi All
I have a fully installed version of Solution Manager 4.0 SP12 and I am looking to configure the Maintenance Optimizer for monitoring our ECC and BW systems.
However, I feel that rather than using the wizards I need to set it up step by step.
My question, is there any documentation on how to set this up from Start to finish?
Manay thanks
Phil

Hello Guys..
The Step by Step Configuration of Maintenance Optimizer link is :
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
Revert points is appreciated
Thank you..

There are no stack configurations available in the Maintenance Optimizer

Hello,
I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0.
I have downloaded the EHP1 and cpoied them into the "EPS\in" directory.
When I press the u201CStack Configurationu201D button, I get a pop-up that says, "There are no stack configurations available in the Maintenance Optimizer".
Does it require any files like .XML to load the files? Please let me know your suggestions.
Thanks,
Niranjan.

what happened to us was we did not download the upgrade programs for EHP1. Make sure you download both SPs in note 1169247. The first one has the SPs and upgrades SPs for Solman 7.0 to EHP1. The second download for the SPs for EHP1).
Also, we did it manually without the using the button 'stack configuration. Hope this help.
(Supp Packs and Upgrade SPs for Solman 7.0 to EHP1)
SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-20 (07/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
(Support packs for EHP1)
SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 20 (03/2009)
Source stack : 18 (11/2008)

Configuring Maintenance Optimizer issue

Similar Messages

Maybe you are looking for