Configuring Multiple domain Email addresses in Exchange server 2013 for Send/Receive

I've setup an exchange server 2013 , I have an requirement to setup email addresses for multiple domain account.
For example - My primary email addresses - [email protected] however i need to setup multiple domain email account for single AD user.
Example
[email protected]
[email protected]
[email protected]
I was able to setup account to receive email from different users to single mailbox users however how can i send mails from other domains email address apart from primary domain email 
Thank you
Benhur

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Similar Messages

  • Exchange server 2013 - cannot send / receive external emails - we can access owa -we can send/receive internal emails

    Exchange server 2013 in Windows server 2012 VM
    It was working fine then start the issue.
    Firewall is managed externally and the last report said:
    "I checked the firewall logs, which shows traffic being allowed through port 25 from 10.10.10.10 to 4.28.237.225: Log Number 116 Last Activity 2014-08-28 23:48:33 Status [accept] Src 10.10.10.10 Dst 4.28.237.225 Service SMTP Policy ID 1 Src Port 64081
    Dst Port 25 While I showed one log, there were multiple log entries showing the same: traffic being accepted through port 25 from 10.10.10.10 to 4.28.237.225.
    Can you verify that the mail server is set up so as to allow port 25? "
    Today I was able to telnet the server from home: successfully 
    220 DTALL-EXCSRV002.DTC.dualtemp.com Microsoft ESMTP MAIL Service ready at Sat, 30 Aug 2014 16:31:16 -0400 ehlo 250-DTALL-EXCSRV002.DTC.dualtemp.com Hello [70.44.124.141] 250-SIZE 37748736 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS
    250-AUTH NTLM 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250 XRDST
    Also the receive - send connectors seems ok
    Mx record point to Microsoft protection:
    dualtemp-com.mail.protection.outlook.com.
    Again, OWA is able to access and send/receive emails internal but never external even no bounceback  just it never arrive.
    Help me please. This is my first admin chaos...

    Hi,
    Is there any update with your issue?
    If the CAS and Mailbox servers are collocated on the same server, the SMTP Receive connection for the Transport service will listen on 2525 instead of 25. If you install the CAS and Mailbox on the same server, please make sure that port 2525 is open.
    For more information about Exchange 2013 mail flow, here is a blog for your reference.
    Exchange 2013 Mail Flow Demystified…Hopefully
    http://blogs.technet.com/b/rischwen/archive/2013/03/13/exchange-2013-mail-flow-demystified-hopefully.aspx
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Exchange Server 2013: no send/receive after failed CU1- CU2 and machine restore

    Hi!
    For several reasons, I decided to fully restore my Exchange Server 2013 machine today.
    The machine is virtualized on Hyper-V.
    I rebooted the server and recovered from backup and Exchange seems to be working fine. However, I cannot receive or send mail. If I try to send a message it goes to the "drafts" folder. OWA and EMC is working. I can not send mail between interna mailboxes
    either. Outlook says disconnected.
    When running the Exhchange Connectivity Analyzer, I get the following:
    - Receive: Connection was successful but no banner was received.
    - Send: Successfull. However when trying to send mail to external mailbox it does not reach that mailbox.
    Mailflow was working perfectly at the time of the backup.
    Help is much appreciated!
    UPDATE 1: When telnet on local server i get SMTP banner. But not on other computers in same subnet.

    OK. After fiddeling around in ADSIedit and trying to rebuild my Exchange environment I ended ut breaking it completely.
    I then restored both my DC (Exchange schema CU2) and my EX (Exchange schema CU1). Scema Versions where the inconsistent as stated.
    Then I uninstalled the KB2874216 successfully. After that i tried to Upgrade Exchange to CU2. The Upgrade failed at Mailbox Role: Mailbox Service With error Message:
    The following error was generated when "$error.Clear();
              if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
                if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
                  $sysMbx = $null;
                  $name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
                  $dispname = "Microsoft Exchange";
                  $mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
                  if ( $mbxs.length -eq 0)
                    $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                    if ($dbs.Length -ne 0)
                      $arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
                      if ($arbUsers.Length -ne 0)
                        $sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
                  else
                    if ($mbxs[0].DisplayName -ne $dispname )
                       set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
                    $sysMbx = $mbxs[0];
                  # Set the Organization Capabilities needed for this mailbox
                  if ($sysMbx -ne $null)
                      Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                      set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
                      # No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
                      # This can be remove after BUG(O15#2555914) is fixed.
                      if ($sysMbx.RetentionPolicy -eq $null )
                         $arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
                         set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
                  else
                    Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
                else
                  write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
            " was run: "Database is mandatory on UserMailbox. Property Name: Database".
    Seems the problem was corrupted arbitrary system mailboxes from previous Exchange 2010 to Exchange 2013 migration.
    The solution for me was to restore the corrupted arbitrary mailboxes using this
    LINK. It is for 2010 but Works on 2013.
    I am now currently on Exchange CU2 on both my EX server and on my DC. Now I have to check mail flow and will report back.

  • Best practice for creating a new email address to Exchange Server 2010 for share point Library

    Hi,
    Please advise if there is any best practice for the above issue?
    Thanks 
    srabon

    Hi Srabon,
    Hope these are what you want.
    Use a cmdlet to Create a User account and Mailbox in Exchange 2010
    http://technet.microsoft.com/en-us/magazine/ff381465.aspx
    Create a Mailbox for an Existing User
    http://technet.microsoft.com/en-us/library/aa998319(v=exchg.141).aspx
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

    in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

    while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

  • Exchange server 2013 mail send and received problem

    Hi Support,
    I have Install Exchange server 2013 and create mail box and local send received locally but days back i have not able to mail send and received. what setting are required for user mail send and received locally. and how to create mx and txt record for my
    domain.

    Hi,
    According to your description, I know that the Exchange server can send/receive internally at beginning, however doesn’t work now. Please correct me if there is anything misunderstand.
    Great checklist from S.Nithyanandham. Additionally, how about sending/receiving via OWA? And any error messages when can’t send and receive?
    Please make sure the Message Tracking has been enabled and run following command to output track log and check detail information:
    Get-MessageTrackingLog |FL > "c:\Track Search.txt"
    For more information about Message Tracking logs, please refer to below article:
    http://technet.microsoft.com/en-us/library/bb124926
    If you want to communicate externally, you need to contact ISP to register DNS MX record.
    Best Regards,
    Allen Wang

  • HT4436 I have a primary email address that I use now that is not an icloud account.  If I create an icloud email address, will I be able to send/receive  emails on both accounts simultaneously?

    I have a current primary email address that is not an icloud account.  If I create an icloud email account, will I be able to send and receive emails from both accounts simultaneously, or will the icloud account become my primary account and will I then have to inform everyone that I have a new email address?

    Welcome to the Apple Community.
    You can use either account and set one as default if you wish.

  • Help with Moving Emails from Exchange Server 2013

    Hi Team,
    Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
    1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
    I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails. 
    Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
    Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
    I would really appreciate any assistance that you can provide in this matter.
    Regards, Greg.

    Hi,
    You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
    3rd party database”.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Exchange Server 2013 OWA Related Issue

    Hi everyone,
    we installed exchange server 2013 for our new organisation.
    Everything works fine except OWA Version, it shows as 2010.
    Any suggestion to resolve this issue.
    Regards
    Kart26

    Could be that you are still running an early build of Exchange 2013
    and are using IE11 - That would load OWA Light that looks exactly the way it did in Exchange 2010.
    Resolution: Install Exchange 2013
    CU3
    or as a workaround, add the domain to the compatibility view in IE.
    Martina Miskovic

  • Need in-Place Archive quota wise (Exchange Server 2013 )

    Dear All,
    I have implement the exchange server 2013 for archiving. i have configure retention policy for day or year wise for archiving policy. i didn't found mailbox size wise retention policy for archiving. Mean, if one of exchange user mailbox size limit over before
    day wise retention policy then the quota retention policy will be affect on that mailbox user
    Thanks

    Hi,
    When an archive mailbox exceeds the specified archive warning quota, a warning event is logged in the Application event log.
    When an archive mailbox exceeds the specified archive quota, messages are no longer moved to the archive, a warning event is logged in the Application event log, and a quota message is sent to the mailbox user.
    By default, in Exchange 2013, the archive warning quota is set to 45 gigabytes (GB) and the archive quota is set to 50 GB.
    Here is an article that may help you for your reference.
    https://technet.microsoft.com/en-us/library/dd979800(v=exchg.150).aspx#quotas
    If there is anything about this issue, please feel free to let me know.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013

    Hi all to every techies ....
    I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
    by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated , 
    The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER 
    Thank you all
    Neil Patric 

    Hi,
    To understand more about the issue, I’d like to confirm the detail error when the installation failed.
    As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
    1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
    2. Installing the Exchange Server 2013 pre-requisites on the server
    3. Running Exchange Server 2013 setup
    For more information, you can refer to the following article:
    http://exchangeserverpro.com/how-to-install-exchange-server-2013/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Angela Shi
    TechNet Community Support

  • What is the easiest way to create alias email addresses in exchange 2013?

    For example my official domain is [email protected]
    Within my company i want to make it look like certain departments are sending from bicycles.com skateboards.com
    and skooters.com and receive to those addresses even though the emails are really going through the
    [email protected] domain. but it appears to be coming from three other domains.
    appearance is everything. What is the easiest way to accomplish this.
    Step by step with examples if possible. I am not well versed in exchange server 2013 yet.
    Droid Hacker

    In Exchange 2013 you can use the ECP to add additional email addresses to mailboxes. In order for a mailbox to send using an address, that address needs to be set as the reply address. One mailbox cannot send as multiple addresses. Doing that would require
    a mailbox for each address. To set a new primary address on a mailbox log into the ECP and choose mailboxes under the recipients option on the left. Then search for the mailbox you want to add the address to and click the edit symbol. Navigate to the
    Email Address tab on the left. To set a new primary address you will likely need uncheck the box for "Automatically update email addresses based on the email address policy applied to this recipient". Then click the plus button, enter the new address,
    and check the box for "Make this the reply address"
    Before you do this you should ensure that the proper MS records exist for these other domains, and that they are properly configured for mail flow. Once you set this as the reply address for a mailbox, that is the address external users will use for replies.

  • How do I host multiple domains on a single Messaging Server?

    How do I host multiple domains on a single Messaging Server?
    <p>
    To host multiple domains on one Messaging Server, use the
    mailAlternateAddress attribute. If you want to host two domains
    (customer1.com and customer2.com) on your server mail1.domain.com,
    make sure that:
    The various domains (in DNS) point to the installed mail server
    (you must have the MX records that
    points mail for customer1.com to mail1.domain.com and
    customer2.com to mail1.domain.com)
    That each person receiving mail at customer1.com and
    customer2.com has an appropriate mailAlternateAddress
    attribute describing the appropriate email address. For
    instance, John Doe can have an email address (i.e. the value
    of the 'mail' attribute for the John Doe LDAP entry) of
    [email protected] and receive his mail on
    [email protected] (the value of the mailAlternateAddress
    attribute)
    With Messaging Server 3.5, mailAlternateAddress can take the
    form of @mail1.domain.com. If jdoe's mailAlternateAddress is
    set to @mail1.domain.com, mail sent to [email protected]
    will be delivered to [email protected]

    jaygatsby1123 wrote:
    So what exactly am I doing with virtual hosts?  There is a place for Aliases...  What would I put in the "Aliases" box?
    Any other host name that you want to resolve to the specified virtual host.  It's quite literally an alias.
    if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
    Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified.  The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol.  The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client.   One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

  • Exchange Server 2013 - Lab setup with internal emails only

    Hi,
    I'm new to Exchange Server 2013. I've started a POC on the product by setting up a Lab environment with one 1 AD server and 1 Exchange server (Both Windows 2012 R2). As this is a POC I just need the internal email communication. I don't want the mails to
    go over the internet. 
    I've completed the installation part and just started to configure Send/Receive connectors and got stuck with the question whether the connectors are required or not.
    Could someone please help me out in configuring internal email setup for Exchange 2013 lab setup.
    Regards,
    Nithin

    Hi,
    You need not to configure send/receive connectors for internal email.
    The following article for your reference:
    http://technet.microsoft.com/en-us//library/aa996395(v=exchg.150).aspx
    Default Receive connectors created during setup
    Certain Receive connectors are created by default when you install the Mailbox server role.
    Default Receive connectors created on a Mailbox server running the Transport service
    When you install a Mailbox server running the Transport service, two Receive connectors are created. No additional Receive connectors are needed for typical operation, and in most cases the default Receive connectors don't require a configuration change.
    These connectors are the following:
    Default <server name>   Accepts connections from Mailbox servers running the Transport service and from Edge servers.
    Client Proxy <server name>   Accepts connections from front-end servers. Typically, messages are sent to a front-end server over SMTP.
    Each connector is assigned a TransportRole value. You can use it to determine the role the connector is running in. This can be helpful in cases where you are running multiple roles on a single server. In the case of each Receive connector previously
    mentioned, their TransportRole value is HubTransport.
    To view the default Receive connectors and their parameter values, you can use the
    Get-ReceiveConnector cmdlet.
    Default Receive connectors created on a Front End Transport server
    During installation, three Receive connectors are created on the Front End transport, or Client Access server. The default Front End Receive connector is configured to accept SMTP communications from all IP address ranges. Additionally, there is a Receive
    connector that can act as an outbound proxy for messages sent to the front-end server from Mailbox servers. Finally, there is a secure Receive connector configured to accept messages encrypted with Transport Layer Security (TLS). These connectors are the following:
    Default FrontEnd <server name>   Accepts connections from SMTP senders over port 25. This is the common messaging entry point into your organization.
    Outbound Proxy Frontend <server name>   Accepts messages from a Send Connector on a back-end server, with front-end proxy enabled.
    Client Frontend <server name>   Accepts secure connections, with Transport Layer Security (TLS) applied.
    In a typical installation, no additional Receive connectors are required.
    Niko Cheng
    TechNet Community Support

  • Multiple domains hosted on one OSX Server

    Hi guys,
    Does anyone know if it is possible to host more than one domain name on OSX server?
    A client of mine runs a number of businesses and is considering Snow Leopard Server, and wants to have multiple email domains and websites hosted on one server. Also per-account contacts sync and calendar sync would be useful, does anyone know if that's available?
    Thanks!
    W.

    You can certainly host multiple domains on Mac OS X Server. There are a few options depending on how you want it to work.
    If all the usernames are the same across all domains (e.g. [email protected] is the same person as [email protected]) then just change the mail server configuration to match all the domains in the mydestination parameter in /etc/postfix/main.cf.
    If the domains are different (e.g. [email protected] is not the same account as [email protected]) then you have two options - one is to use the postfix model (which requires command-line management), the other is to add the email addresses in the shortname section for each user.
    You may have some issues integrating contacts and calendars, though - if you take the postfix model then the users won't exist in Open Directory and won't have a calendar/contact link, etc.
    If you follow the shortname model then you have one directory with all users in all domains and you'll need to work to separate them out if you need to.

Maybe you are looking for