Configuring regional settings during OSD

What is the best way to configure regional settings (keyboard layout and locale) during OSD? Do I just need to create customized unattend.xml file that has these settings configured?

Then your best best is to either us an HTA to set it or use the xml file to set it.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Similar Messages

Configure regional settings

How do I change regional settings normally done during initial configuration?

For what purpose? There are different places where you can change the settings depending upon what you need to do.
Settings>General>International is one place where you can change regional settings.

Cannot Configure Network Settings During ol6u1 HVM Install

dom0: vm server v2.2.2
vm manager: v2.2.0
Oracle Enterprise Linux 6 update 1
When creating a domu server using ol6u1, the network configuration button on the page where you enter the host name is grayed out. I would like to enter the settings during the initial install.
What can I do to make the button usable. When I do an install in Vmware Workstation, the button functions as expected.
How can I enable that functionality in Oracle Vm environment?

Thank you for your answers, they were helpful.
i've done the settings, but network restart seems not to work I have such file in the rc.d directory and tried to change permissions to 777, but it still doest'n work. i'm logged in as root. i get the error:
[root@arch rc.d]# network restart
-bash: network: command not found
I've editer the etc/hosts file:
127.0.0.1 localhost.localdomain arch
I've restarted the machine but i stll have no internet connectivity.
ifconfig says:
eth0
...addr 192.168.0.68 bcast: 192.168.0.255 mask: 255.255.255.0 ...
(which seems correct)

Pre-provision bitlocker during OSD with a Windows 7 Enterprise image fails at Enable Bitlocker - SCCM 2012 SP1 beta

I'm trying the SP1 feature to pre-provision bitlocker during OSD, using an MDT integrated task sequence. It seems like the pre-provision part is working, but when the task sequence tries to enable bitlocker after installing the
OS, it fails. ZTIBDE.log contains the following:
Property UDI is now = ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
System drive is: C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
The deployment method is using ConfigMgr. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Property BdeInstallSuppress is now = NO ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
This script is not currently running in Windows PE ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
We are running a OS that supports BitLocker ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
OSDBitLockerTargetDrive= , OSDBdeTargetDriveLetter= , sOSDBitLockerTargetDrive= C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
This is a Refresh Build where BDE protectors were disabled. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
OS Version is Windows 7 or higher. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Encryptable Volume Count:1 ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Attempting to bind to: C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Success setting oBdeVol ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
BDE Instance Bind Complete ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
Attempting to enable BDE Protectors ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
FAILURE ( 6767 ): -2144272377 0x80310007: Enable BDE Protectors ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
This laptop is in an OU with bitlocker related settings applied via GPO, including allowing enhanced PINs, requiring backup of the recovery passwords and key packages to AD, and to require TPM+PIN for the startup authentication.
Bitlocker provisioning is working on my production server using only MDT (No SCCM), with a task sequence deploying Windows 7. I copied some of the variables from the customsettings.ini over to a collection variable in SCCM for
the collection I'm testing deployment to. Putting those same variables in collection variables should work the same as if they were in the custom settings, but only for members of that collection, right?
The variables set in the collection variables area are
BDEInstall - TPMPIN
BDEInstallSuppress - NO
BDEPin - SET
BDERecoveryKey - AD
BDERecoveryPassword - TRUE
TPMOwnerPassword - SET
OSDBitlockerMode - TPMPin (This one wasn't copied from the other MDT share, but added just for sccm.
I didn't copy the BDEWaitforEncryption variable, it didn't seem like that one would be necessary with the pre-provisioning. What am I doing wrong here?

If not you could add a set variable action to your task sequence after the UDI wizard to set OSDBitLockerPIN to %BDEPin%. You could add a condition to the action to only run if BDEPin exists.
I don´t quite fallow, how I can switch these variables between. I admit I some time have difficulties to understand the variables. Could you mark discribe me the settings of set variable step I have to enter. Thanks!
With Confmgr step Enable Bitlocker I have another issue - it does not allow to to enter pin code with letters.
No problem :-). There is a task sequence action called "set task sequence variable". Just add one of these actions to the task sequence after the UDI wizard. There are only two things you have to configure in the action, the variable you want to set
and the value you want to set that variable to. The UDI wizard will create the variable BDEPin with a value equal to the PIN you enter in the UDI wizard page. So in your "set task sequence variable" action enter the variable name as OSDBitlockerPIN
and the value as %BDEPin%. This action will then create the OSDBitlockerPIN variable with the value that was stored in BDEPin by the UDI wizard. The built in SCCM action will then use this as the PIN rather than whatever value is configured in the task sequence
editor.
However the best solution would probably be to get the UDI wizard to set OSDBitlockerPIN rather than BDEPin in the first place. I think you can do this in the UDI wizard editor or directly in the XML. I don't use the editor these days so can't recall offhand.
I will take a look at this next week.
Most of the task sequence actions support variables and it enables you to configure the action dynamically at runtime. For example the same sequence can be used to deploy systems into different domains, languages, applications etc. all by setting variables.
It's the basis of how the UDI wizard works, it just sets variables which are then consumed by either MDT scripts or task sequence actions. The variables can be configured by UDI, collections, MDT customsettings.ini, MDT database or scripts. Dynamic deployment
is definitely the way to go :-).
I think you are correct about the built-in action not supporting enhanced PIN. I think it only supports standard numeric PIN. Whether setting the PIN via the variable works around a restriction in the task sequence editor I am not sure, I suspect not.
Mark.

Regional settings is not effecting in SQL Server

Hi All,
I made changes to the regional and language (made decimal = ,) of the windows server 2008 R2 Standard but the database still not accepting comma as a decimal point.
Tried restarting the SQL Server services and restarted the server without luck.
Really appreciate inputs.
Thanks,
Ram.
Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.

1. Right click on the server name.
2. Click on Facets.
3. Then select Server Configuration Facet.
4. Look for Default Language.
5. Set it to values as given in the below link:- For Ex: 1 for German
This changes the default language for new users. (And I don't think there is a need to restart of SQL Server, but I have not checked.)
To change the default language for an existing user, use ALTER USER.
But of course, the whole talk about language setting in SQL Server in this context is completely uselss. SQL Server only knows about decimal points. This applies both to literals in the code, and when interpreting strings with CAST/CONVERT.
Everyone is correct that that regional settings does not affect SQL Server - nor should it, it is a server after all.
One more point here when i try creating a filtering functionality on application it is creating decimal as "." not "," is this issue related to application or DB?
I have no idea what you are doing, but the answer is probably the application.
Erland Sommarskog, SQL Server MVP, [email protected]

How to configure network settings in solaris 10

hi
i have downloaded solaris 10 and installed on dell dimension desktop,as i have gone through the instalation guide,i see i dont get netwotk configuration (DNS,DHCP.....)settings during installation,it havent asked me about those settings,It just asked the host name ..after installation i see no network connection even i have my cable connected.ethernet cable connected Its INTEL
can anyone help me how to resolve this issue

You could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC.

Set Date/Currency/Numeric Format in WebIntelligence - Regional Settings

We have migrated from BOE R2 to BOE R3.1, and our users have observed that the date & numeric format is not localized to spanish (Spain).
How can Web Intelligence regional settings be configured to all the users (not editing personal configuration of every user)?
For instance the time is indicated with AM/PM instead of 24h time format and the numbers are separated by comma (,) and not by dot (.).
Example 11,816,138 instead of 11.816.138
Thank you!

Problem solved, the fp 1.3 installation did not complete.
We reinstalled it and now everything works properly.

Jdeveloper 11g cannot be installed on Windows with Thai regional settings

I have no idea where to properly submit this issue. Hope I do not abuse this forum for too much.
Jdeveloper 11g cannot be installed on Windows with Thai regional settings configuration.
I've got "A fatal error has occurred. This application will terminate" error dialog, while installing.
I have to change my regional settings to English then install it and change my setting back later.
Regards

Sigh... This forum software doesn't even support image posting.
The error is every easy to reproduce.
1. On Windows XP, goto "Control Panel" -> "Regional and Language Options" -> "Standards and format"; and change that to "Thai"
2. Invoke "jdevstudio11110install.exe"
3. Always click "Next" until the error dialog appear.
<pre>
. Exit [x] .
. [!] A fatal error has occurred. This application will .
. terminate. .
. [[ OK ]] .
</pre>
From my experience, this always have something to do with the Buddhist Era year system (AD + 543).
Regards.

Editing regional settings

Hello all,
is there any way to configure the regional settings beyond what is possible to do in the Language & Text -> Format window? I'm trying to figure out if I can keep some of the settings from one region while retaining settings from another.
E.g. I'd like my powers to be denoted like this: 1.23456x10^3 which is what I get when I select my home region but then I get the names of days and months in my native language and I'd prefer to have them in English. If I select an English speaking region I get the right names for the days of the week and months but then powers are denoted by 1.23456E10. Are these settings stored in a file somewhere that would be possible for me to edit?
If anyone knows how to do this, I'd much appreciate it!

If you click the Customize buttons on each of the areas under the Format tab, you should be able to adjust each item however you like.
If you check this you will see that the Customize button does not offer access to the item the OP wants to change.

What to sign in project settings during distribution

Hello.
After submit to App Store i received message: "Please ensure that you are changing your "Code Signing Identity" to "iPhone Distribution" and your "Code Signing Provisioning Profile" to your distribution profile in your TARGET build settings - not the project build settings."
I wrote the same values in project settings and target settings (for active configuration) as it is written in Apple "How to" section.
Can someone tell what to write in project settings during distribution?

Welcome to the Apple Community nico_stam.
Are you trying to sign in or create a new ID.

Client not installing during OSD - error code 80041002

Hi All,
I have an issue using SCCM 2012r2 with CU1 where the agent is not installing as part of the OSD step 'Setup Windows and ConfigMgr'. The error being returned is 1603 and with a bit more digging this appears to be this error
Product: Configuration Manager Client -- Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
followed by
Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
Having looked at some of the forums this appears to be a known issue which has a hotfix available if you are installing the client on a server hosting a ConfigMgr Management Point. However the issue I have is on a client PC during OSD.
Originally I was installing the CU1 update using the PATCH= property in the installation properties and as part of my troubleshooting I have removed this leaving only the SMSCACHESIZE, SMSMP and FSP properties in the OSD step. This was working last week
and I can see no reason why there would be any issues with this.
Any help would be greatly appreciated as this is driving me crazy!

@Nash The Setup Windows and ConfigMgr step contains the following:
SMSCACHESIZE=20480 SMSMP=mpsiteserver.domain.local FSP=fspsiteserver.domain.local
@Jason The errors are in clienmt.msi.log the end of the log looks like this:
MSI (s) (F0:2C) [13:33:12:918]: Note: 1: 1729
MSI (s) (F0:2C) [13:33:12:918]: Product: Configuration Manager Client -- Configuration failed.
MSI (s) (F0:2C) [13:33:12:918]: Windows Installer reconfigured the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603.
MSI (s) (F0:2C) [13:33:12:918]: Deferring clean up of packages/files, if any exist
MSI (s) (F0:2C) [13:33:12:918]: MainEngineThread is returning 1603
MSI (s) (F0:FC) [13:33:12:918]: RESTART MANAGER: Session closed.
MSI (s) (F0:FC) [13:33:12:918]: No System Restore sequence number for this installation.
=== Logging stopped: 26/08/2014 13:33:12 ===
While the section that contains the error 25150 looks like this:
[13:33:12] Registering Hosting Configuration.
MSI (s) (F0!A4) [13:33:12:638]: Closing MSIHANDLE (18847) of type 790531 for thread 2980
[13:33:12] @@ERR:25150
MSI (s) (F0!A4) [13:33:12:638]: Product: Configuration Manager Client -- Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
MSI (s) (F0!A4) [13:33:12:638]: Closing MSIHANDLE (18845) of type 790531 for thread 2980
Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
MSI (s) (F0:C8) [13:33:12:638]: Closing MSIHANDLE (18843) of type 790536 for thread 1836
CustomAction CcmRegisterHostingConfiguration returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (F0:2C) [13:33:12:638]: User policy value 'DisableRollback' is 0
MSI (s) (F0:2C) [13:33:12:638]: Machine policy value 'DisableRollback' is 0
Action ended 13:33:12: InstallFinalize. Return value 3.

Software updates to unknown computers during OSD

Hi!
Trying to figure out why my computers during OSD not install software updates. I have deployed all my updates to Unknows Computers collection as available and configured "Install Software Updates" step to install "All software updates".
When i look into UpdatesDeployment.log i get error: "InstallTargetedUpdates failed, error 87d00708", which is according to
Torsten means that i does not find any applicable updates to install.
Do I have to deploy the updates as Required to "Unknows computers" for the updates to install?
Thanks!

Hi,
Unknown computers include the following:
A computer where the Configuration Manager client is not installed
A computer that is not imported into Configuration Manager
A computer that is not been discovered by Configuration Manager
I think it is because you have SCCM clients installed on these computers when you use "Install Software Updates" step to install updates.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Client install fails during OSD

Hi,
OS Deployment usually works without any issues for us. Sometimes (like 1 out of 15 deployments) the SCCM client will not install correctly and the system will boot up without any applications. That's okay, we just restart it and it works on the second attempt.
Lately however, I discovered an issue with a certain model (Lenovo R500): The SCCM client configuration now fails every time (tried four times in a row!). It wasn't that bad before...
Here are some answers to questions some of you might probably consider asking. :)
- We are using diskpart /clean at the start of every task sequence
- The system is domain joined before the SCCM client install step
- Jason Sandys ConfigMgrStartup Script (client health GPO) is active
- Client push install is active
- The BIOS is up to date
- These are our setup parameters during OSD: SMSMP=*FQDN* CCMEVALHOUR=12 PATCH="\\*FQDN*\hotfixes\configmgr2012ac-r2-kb3026739-x64.msp"
- I tried installing newer network card drivers during the OSD in case the old drivers suddenly can't handle it any more but that also didn't improve the situation
I thought maybe the GPO or the client push are interfering with the setup while running the OSD, but that also happens if the GPO is disabled. Also, the client push install never interfered with the OSD before and I don't think that it suddenly would.
I zipped and uploaded the ccmsetup.log and client.msi.log to OneDrive, I would really appreciate it if someone could take a look at the logfiles and identify any potential issue that I'm not seeing.
Logfiles: http://1drv.ms/18FTcAH
Thank you!

I just found a solution thanks to another fellow forum member that suggested I make sure that "Client Push" was not enabled. I too was experiencing intermittent failures in OSD at the "Setup Windows and ConfigMgr" step that did
not make any sense.
After a review of the ccmsetup logs on the OSD machine and ccm.log on the server I was able to see that "Client Push" was beating the TS to installing the client by 4 seconds causing the TS to fail.
Torsten indicated that Client Push and OSD can be problematic.
OSD Client Patch fails intermittently
After reviewing your ccmsetup.log I see the same evidence at time stamp 11:40:50 that I saw in my logs indicating that ccmsetup was already running when the TS went to install the client.
An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
MSI: Aktion 11:40:50: Rollback. Aktion wird rückgängig gemacht: ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
File C:\WINDOWS\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation was cancelled (1602) ccmsetup 2/26/2015 11:41:00 AM 1920 (0x0780)
Hi pfitchie,
I unmarked my reply as answer, it happened again and after reading your thread and this reply it all makes sense. I now disabled the Clientpush and will see what happens. Is there a possibility this is only happening if you apply CU4 during the OSD? It never
happened before.

Nvidia (Quadro K2000) Driver isn't installed during OSD (Task Sequence succeeded) - HP Z620

Hi everyone,
I have added a driverset (HP Z620) in SCCM for the first time using our internal procedure (Importing Drivers to SCCM, Create Driver package with specific category, apply driver package in TS using WMI to query for the model).
The Task Sequence succeeded, but the NVIDIA K2000 Graphics driver isn't installed (only HD Graphics 4000 driver).
Looking at the drivers in the Driver Package, this should normally apply since the driver is compatible with this specific GPU.
At the forums, I can see that some people have created a seperate package for the GPU driver installation using command line switches.. But looking at the environment at the customer, we have never done this and in the past, we have succesfully installed
the driver for this GPU before.
PS: The driver for the GPU in my new driver package (HP Z620) isn't the same as for previous models (HP Z220, Z230, Z600).
Could you please advise me what to do? Should I have added something in the driver sources before importing the driver to SCCM?
Thanks in advance!
Kind regards

Hi
I m installing Nvidia (Quadro K2000) Driver during OSD (Task Sequence succeeded) - HP Z420
Remove the Graphics driver for NVIDIA from the current driver database
Added below task in the existing task sequence as invidual installation based on the Condition (WMI query)
Command Line
HP_Z420_Graphics_x64\Win64_332_50\setup.exe -s -k -clean -noeula
This will install the desired driver and related configurable components
WMI Query
select * from win32_ComputerSystem where manufacturer like '%hewlett%' and model like '%z420%'
Currently I m looking out for the Errors codes needed to add to this task . Success codes 3010 and 0 already added

"Application failed to evaluate" during OSD after SP1 Upgrade

Hi,
Today i upgraded out configuration manager from 2012 rtm to 2012 sp1. The update process completet without any errors but now i'm unable to install application during osd. The first application crashed with the message:
Installation job completed with exit code 0x00000000
Execution status received: 16 (Application failed to evaluate )
in smsts.log
I know that there are some gotcha's regarding application installation during osd after sp1 upgrade. I already did the following steps:
- Update the deployment type of the application in my osd task sequence
- Re-Add the Network Access Account
- Removed the first application in the task sequence to see if the problem is application related
- Checked the option "Allow this application to be installed.." in the application properties
- Reboot my site servers
I can install application via Software Center without any problems, also the software updates are working normally.
Thanks in advance

Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Configuring regional settings during OSD

Similar Messages

Maybe you are looking for