Configuring user specified alerts using solution manager

We are having SolutionManager 4.0 with sp 12.
We configurred alerts for different production systems which are in the
landscape.Right Now We have special requirent for our R/3 Producton
system.
We need to setup alert for monitoring of avg response time of
ZBAPI_TD_Salesorder_Create (function module) preferably for just SCMICAN(user) . SAP team should be alerted when the call avgs more than 25
seconds over any 15 minute time frame
Can some give resolution for this kind of special requirement
regards
srujan

hi,
go to this link you will get all info regarding solution manager
<a href="https://websmp208.sap-ag.de/solutionmanager">https://websmp208.sap-ag.de/solutionmanager</a>

Similar Messages

  • CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

    Hi,
    Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
    Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
    We are using NWDI system for transporting our portal transports.
    Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

    Hi Naveen,
    Please find given below BBPCRM & SAP_BW version..
    BBPCRM     500     0013     SAPKU50013     BBPCRM     BBP/CRM Supp. Pack.
    SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse     Component Supp. Pkg.
    This problem is not only with  Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
    Regards,
    Suresh

  • Regarding this issue in the configuration on smsy in the solution manager

    hai all,
    i am havig an issue when trying to configure the smsy in the solution manager
    the issue is
    Invalid user s0001234567 when calling SAP Backend system
    all the rfcs related to the oss is fine
    i had maintained the user in the aisuser tcode correctly
    and then i router is finly working
    software component : st is 400 kernel and level is18
    hope all the experts of solution manger help me
    thanks & regards
    praveen kumar

    Invalid user s0001234567 when calling SAP Backend system
    Is it a valid S-USER?
    Use valid S-USER and update the user details in AIUSER.
    Regards,
    Nick Loy

  • Configure  MOPZ after EHP1 in solution Manager

    Dear Experts,
    We have fresh installed SAP Solution Manager 4.0 on windows 2003. Now we have to update EHP1 with SP26 i.e.SAP EHP 1 for SAP Solution Manager 7.0.Now I want to configure Maintenance Optimizer in this Solution manager.So that We can downlaod Support Package via this solution Manager.
    What is pre-request to configure MOPZ .When I run solution_admin  transistion .it is  going to portel and ask  SAP Web Application  ask user ID and  Password.
    Whats User ID will come here ?. I am giving J2EE_admin and Basis user ID. But its not taking these Users.
    Whats User ID it will take.
    How to configure MOPZ , Please give me step by step process . So that I  can configure MOPZ.
    i will give thanks in advanced for my help
    regards

    When I am using User ID  J2EE_ADMIN   and Password as below
    SAP Web Application Server
    User Name :    J2EE_ADMIN
    Password:
    My default client is 100 and this user ID and password is working perfectelly in sap gui logon.
    Belwo error mesee come  during  user ID J2EE_ADMIN and Password .
    Error when processing your request
    What has happened?
    The URL http://testserver:8000/sap/bc/webdynpro/sap/wd_sise_main_app was not called due to an error.
    Note
    The following error text was processed in the system SAL : Die URL enthält keine vollständige Domainangabe (testserver statt testserver.).
    The error occurred on the application server testserver_SAL_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CHECK of program CX_FQDN=======================CP
    Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SAL in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server testserver_SAL_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server testserver_SAL_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 100 -u: J2EE_ADMIN -l: E -s: SAL -i: testserver_SAL_00 -w: 0 -d: 20110813 -t: 204925 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    what it show.
    regards

  • How to monitor BI & PI using Solution Manager 4.0

    Hi, we have installed Netweaver 04S SR2 SP11 BI & PI components. We want to use Solution Manager 4.0 to setup monitoring for these 2 systems. Any guide or documentation will be greatly appreciated.
    Thanks in advance.
    Arshish

    Hi Arshish,
         To setup monitoring you will first have to include these systems in the system landscape of SAP solution Manager 4.0 in transaction SMSY.
    The steps in the order are :
    1. Create Server ( Server name ,IP and Fully qulaified Host name)
    2.Create Database  (Give the database you are using)
    3.Then you have to create the system itself. and give the information as required.You will be able to do it when you will go through it.
    Then you have to generate the RFC's from solution manager to satellite systems and back.These RFC's have to be trusted.Assign role SAP_S_RFCACL or profile S_RFCACL  to the users in SOLMAN as well as satellite system.
    Follow these steps and create a Logical component for the system that you have added.
    Follow these steps first.More information can be found out on
    service.sap.com\solutionmanager
    or you can look for the RKT'S on service marketplace.If you need any furthur assistance do reply back.
    please award points if found helpful
    Best Regards
    Amit

  • Auto Alerts in Solution Manager!

    I am tryting to configure Auto Alerts in Solution Manager 7.0 EHP1. I have configured the system landscape and created the RFC connections to satellite systems.
    I want to configure system monitoring in SolMan for Satellite systems with Auto Alerts.
    I first configured the system monitoring in SolMan and assigned the processes to be monitored. Then I tried to configure Auto Alerts as following..
    1) created the ARM ( Auto Reaction Method in Tx-RZ21) copying the existing one. ex: ccms_onalert_email
    2) Assigned the Auto Reaction Method to the MTEs that I want to monitor in satellite system ( in Tx-RZ20)
    3) Created the distribution list ( Tx-SO01)
    4) Tried to send the message manually from Tx - SO01 and successful
    5) I changed the threshold values to check if I get any autoalerts but Failed...:-(
    I searched alot for the sap notes but finally confused.....
    Please let me know if I am missing anything here...Or gimme your working exprience in steps..
    Thanks,
    Shai.

    Srikishan,
    Your article is a very helpful one. I did my configuration as it is in your article. But I do not get any auto alerts email notifications.
    When I test the CCMS ping In RZ21. I get the below results.
    CCMSPING: Test Results
    Available Systems - CCMSPING call successful
    Failed CCMSPING Calls
    SID      CCMS_SYSTEM_PING_DEST
    Agents that are reporting errors
    CCMS_SYSTEM_PING_DEST
    And in RZ20  I get the below results:
       Node display off
       Availability and Performance Overview
              Availability
                  RFC-Destinations
                  DDS
                      Availability: DDS
                          Availability                    0 %
                          CCMSPING/Configuration Error    Communication error when attempting to call CCMSPING; see CCMS_SelfMonitoring
    For the Connection Data in monitoting and availability systems I did as following: ( ABAP Message server)
    System     :          DDS
    Description :         Sandbox System
    Message Server Host Name :  bjrtssap1.ca.shainet.com
    IP Service Name            ms.sapDDS_DVEBMGS20
    Router String
    Please let me know if I am missing any configuration here.
    Thanks,
    Shai

  • Project Management using Solution Manager

    Hi,
    We are trying to use solution Manager for managing our IT projects - specifically for SAP projects.
    We browsed through the existing functionalities that are available and are not able to get info on the following:
    ___Project Admin tab for Roadmaps :_ __ In the transaction RMMAIN, we are able to define the scope of the activities at each phase and assign team members and track the status of the activity / task.
    However we do not have the tab for tracking the planned start date / end date and the actual start / end dates. Similar is the case for efforts.
    So not sure how to track these?
    Integration of Roadmaps and Blueprints : Once we have defined the project and assigned the Roadmap, we have all the activities that need to be tracked. In addition in transaction SOLAR01 / SOLAR02, we can define the scope and configurations which in itself are a kind of sub projects to be embedded withing the Blueprint and realization phases respectively of the main Projetc Plan.
    How to link these Blueprint specific plan and the realization related plan to the main project plan created out of the Roadmap chosen and to track them as one single project?
    Synchronization wih ms project : I see only the option to download the plan as an mpp file. But is there any option to upload mpp as well so that the project can be tracked using mpp and synchronized with Solution manager at frequent intervals?
    Your answers would definitely be helping us a lot and would be greatly appreciated.
    thanks in advance.
    regards,
    suresh velan

    Hi Suresh,
    Solution Manager is a Project Management tool. But it is not for Project Planning. If you want to do Project Planning also from the SolMan system, then you have to enable cProjects component of SolMan.
    Synchronization between your MS Project and cProjects is possible. But synchronization between SolMan's RoadMap/Blueprint and MS Project is not possible.
    In RoadMap, you can capture and track the status of all phase-wise activities as to what is their status. Here capturing date details is not possible.
    In Blueprint/Configuration you can capture and keep track of the individual object's blueprinting and configuration activities. Here you can capture the planned/actual start/end dates for each object.
    As I said earlier, Solution Manager provides lot of Project Management features, but Project Planning is not possible. For that we have to start using cProjects component in SolMan.
    Hope it helps.
    best regds,
    Alagammai.

  • No EarlyWatch Alert for Solution Manager task in SDCCN

    Hello All,
    We have configured SAP Solution Manager and managed system to generate EWA report.
    In Solman, we have created the system, logical system and solution. We have activated the managed system in Setup EarlyWatch Alert in Solman.
    In Managed system, we have activated SDCCN, assigned BACK RFC, created Maintenance package and refresh sessions.
    However, after completing the Maintenance package task there is no EarlyWatch Alert for Solution Manager task created in managed system. We have reviewed the task logs and found no errors.
    In Solman, when we create EWA for today's date the status is showing with an Hour glass stating that "Wait for session data: SAP EarlyWatch Alert and session number"
    Kindly assist us in fixing this issue
    Thanks in advance
    Regards,
    Satish

    Hi
    the task "early watch alert for solution manager" created automatically when did you perform the task "refreh session" or "Maintenance Package"
    please create the  relevant task, via : SDCCN -> Task -> Create ->Request session data ->Periodic -> Earlywatch Alert -> Continue.
    'Schedule' the start date of the first session  and - Task -- create Click on 'Refresh sessions' - Press 'Enter' - Select 'Now', to schedule the job 'immediately. once you create the relevant tasks you go by,  in the Menu -  Goto -> start - to activate the Earlywatch alert session Now, you can check the finished EWA task in 'done' tab.
    Login to Solution Manager, goto trx. DSWP --> Select your solution, Solution Monitoring - Earlywatch alert -  Click on Earlywatch alert --> start service processing --> Press 'OK' to start the background job - click 'Refresh'
    Now, you can see the 'Early watch alert' in the green colour .
    more further refer here [EWA guide|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-1701991-9166329-1518/EWA_Activation.pdf]
    jansi

  • Configure TMS in fresh installed Solution Manager system

    Hi Expets,
    I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
    Also would like to know after TMS  implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.

    Hello,
    No Deejoy, I provided you with how to resource to do the things you requested.
    TMS is transport Management System.
    If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
    If you want to implement ChaRM, I pointed you to the Wiki.
    If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
    And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
    But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
    Charm was only raised, because you raised it in your question.
    You have all the resouces you require to address everything you raised.
    This is what is provided in my earlier reply.
    Regards,
    Paul

  • Email alert from Solution Manager

    Hi
    I have configured both System and Business Process Monitoring in SAP Solution Manager.
    I can catch all the errors and display them in the graphical view, I can see details and so on.
    Unfortunately I don't receive any email alert from Solution Manager.
    Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
    Thank you
    Alessia

    Hi Alessia,
    I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
    Dom

  • Early watch alert from Solution manager

    Hi ,
    I have been receiving the earlywatch alerts from Solution manager to my mailbox.
    But this week I didn't receive early watch report . I am getting all other alerts through solution manager to my mailbox.
    I checked in the receipients list and my emailID is there and when I checked in SOST in solution manager I can't see that the report in any status there.
    What will be the probelm?
    Please do reply to this query.
    Thanks
    Gayathri.

    Subhash,
    Thanks for the reply, I checked that already.
    I checked and found that in Early watch report is with status data available , but not send .
    Its showing that the job SM:EXEC SERVICES has to run.
    This job has failed in Solution manager with the error as follows.
    ABAP/4 processor: EXPORT_TABLE_UPDATE_CONFLICT
    Job cancelled
    Thanks
    Gayathri

  • Is it a must to use Solution manager for ECC 6.0 upgrade

    Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

    Hi,
    I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4. 
    I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
    Any docs out there for this?
    Thanks!
    I figured it out... i had to add the R/3 Enterprise logical components to my system landscape.  After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
    Never mind!
    Edited by: Tom Janes on Sep 9, 2009 12:52 AM

  • How to Use Solution Manager to collect Status Reports from Consultants

    Hi,
          I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
    BR,
    Raj

    Hi Rajasan,
    to be able to meet this requirement, you need to set up plan working load in admin tab for your resource,  they need to update actual data based on the work completion, you will get status of work,
    if you require email, you need to set-up scot, then develop a program with execution scheduling
    please check and revert
    Anil

  • How to configure dba cockpit in sap solution manager

    Hello colleagues,
    how to configure dba cockpit in sap solution manager??
    Thanks!

    Hi Victor,
    Please go through this doc, it might helps you.
    Sap Solution Manager - Dbacockpit
    Sap Solman Instguide Dba Cockpit Setup
    Regards
    Amit

  • How to use solution manager in upgrade projects

    Hi,
    How to utilize/use the solution manager in upgrade project like R/3,BW,CRM or entire landscape.
    if we are upgrading the r/3 4.6c to ecc6 and bw3.5 to bi7.0 how to use the solution manager
    please help and thanks in advance.
    Edited by: MAHIPAL REDDY on Jan 1, 2009 1:28 PM

    Hi,
    Check [this document|https://websmp208.sap-ag.de/~sapdownload/011000358700002696532005E/310_320_SOLMAN_URMP_EN.doc]. This will help you to proceed further.
    This is a detailed documentation on using Solution Manager for your upgrade project.
    This will solve your problem.
    [This Pdf |https://websmp208.sap-ag.de/~sapdownload/011000358700000208052007E/Upgrade_FAQ_SolMan_70.pdf]of FAQs on upgrade project is rich in information.
    Feel free to revert back.
    --Ragu
    Edited by: Raguraman C on Jan 3, 2009 5:27 PM

Maybe you are looking for